Missing file after installing software for Officejet 6210 All-In-One printer.

I got the following error message: "The file C:\{Program Files\HP\Digital Imaging\skins\oov1\skin.xml does not exist".  Can anyone tell me where to get the file and then how to download it?  Your help will be much appreciated.

HI knewsomga,
WIA is Windows Image Acquisition, it is a proprietary Microsoft driver model and application programming interface (API) for Microsoft Windows Me and later Windows operating systems that enables graphics software to communicate with imaging hardware such as scanners, digital cameras and Digital Video-equipment. - Source
 Please follow the instructions below.
Please hold down the windows flag key and the R to open the Run box.
Type services.msc and press Enter
Locate Windows Image Acquisition (WIA)
Right click and open Properties
Stop the service from the General tab and then Start it again
Verify that the Startup type is set to Automatic rather then manual
Also, look for 'Shell Hardware Detection' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically from its properties.
Locate the 'Remote Procedure Call (RPC)' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically as well.
If the issue persist, the HP Print and Scan Dr might help, otherwise I suggest contacting Microsoft.
Click here to download and run the utility > HP Print and Scan Doctor
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

  • Re-install software for the C6280 all in one printer... get an error message "can't find file"

    need to re-install the software for the c6280 all in one printer. downloaded the latest install package from the HP web site. During the install process, I get an error message .. can't find  user/appdata/local/temp/7z256315/setup/.....setup/blocksysuser........
    the folder 7z256315 does not exist on the HD.
    I also get a message that it can't find PS_A10_02_software.msi.
    Windows 7 , C6280 all in one printer. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via wireless to the router.
    hope you can help
    thanks
    charlie
    This question was solved.
    View Solution.

    Hi cberistain, 
    Follow the steps below, and let me know what happens?
    Step one: Clear temp directory
    Type %temp% in the run or search for programs and files field
    Highlight all the files in this folder, and then press the delete key to delete. If you get a message that the file is in use you will need to skip this file(s).
    Continue with Step 2 below
    Step two: Downloaded and extracted to your system:
    1. Download the full feature software and drivers
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-77039-1&cc=us&dlc=en&lc=en&...=
    2. Once the download is finished double click on the file to extract the software.
    3. When the installation window opens press the cancel button to stop the installation
    4. Type %temp% in the run or search for programs and files field
    5. Look for, and open the folder starting with 7z (Example: 7zS2356)
    6. Right click on the folder, and select Copy
    7. Close that window, and all your open windows, and then in the middle of the desktop right click your mouse, and select Paste. This will move the 7z folder to your desktop.
    8. Open the 7z folder you just copied to your desktop
    9. Open folder Util
    10. Open folder CCC
    11. Run the uninstall_L4
    12. When the uninstall has completed restart the computer
    13. Run Disk cleanup from Accessories\ System Tools folder under all programs
    14. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
     15. Open the 7z folder, and then double click on the Setup.exe file which will be toward the bottom of the open window. Follow the on screen instructions to reinstall your printer.
    Let me know if you are able to successfully install the software and driver, and are able to print & scan?
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • How to download repair of "missing WIA" for officejet J4550 All in one printer

    officejet J4550, all in one
    Problem:  message states "missing WIA"
    I'm missing my installation disk and would like to download the solution to repair/update/install the WIA.
    how to download repair of "missing WIA" for officejet J4550 All in one printer

    HI knewsomga,
    WIA is Windows Image Acquisition, it is a proprietary Microsoft driver model and application programming interface (API) for Microsoft Windows Me and later Windows operating systems that enables graphics software to communicate with imaging hardware such as scanners, digital cameras and Digital Video-equipment. - Source
     Please follow the instructions below.
    Please hold down the windows flag key and the R to open the Run box.
    Type services.msc and press Enter
    Locate Windows Image Acquisition (WIA)
    Right click and open Properties
    Stop the service from the General tab and then Start it again
    Verify that the Startup type is set to Automatic rather then manual
    Also, look for 'Shell Hardware Detection' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically from its properties.
    Locate the 'Remote Procedure Call (RPC)' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically as well.
    If the issue persist, the HP Print and Scan Dr might help, otherwise I suggest contacting Microsoft.
    Click here to download and run the utility > HP Print and Scan Doctor
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • WINDOWS 2008 R2 DRIVER FOR OFFICEJET 4610 ALL IN ONE PRINTER

    i am using hp officejet 4610 all in one printer. I need windows 2008 r2 driver for this.
    please help
    saleem

    Hello Saleem,
    Welcome to the Forums
    I have checked the available drivers for your Officejet 4610 and did not see an available driver for Windows 2008 R2. I will post you the link to the drivers that are available below.
    HP Officejet 4610 All-in-One Printer Drivers
    Best wishes,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Unable to install All-in-one Software & Drivers for Officejet 5610 All-in-One printer

    I downloaded the software "File name: AIO_CDB_NonNet_Full_Win_WW_130_141.exe [1/1, 362.68M] version 13.1.0" and tried to install but was not successful after number of attempts. I tried HP Printer Install Wizard for Windows also but it also failed. I could not download even after number of attempts. It used to get aborted at different stages at every attempt. I am interested in HP solution centre for scanning documents. Please provide solution.

    Hi there , I just wanted to stop in and share my suggestions as well, to hopefully help you out with the installation issue you are having with your Windows 7 system. Try these steps in order: Try unregistering and re-registering the Microsoft Windows Installer service:
    1. Click the Start menu and type " cmd " in the search field and press enter.
    2. Type in " msiexec /unregister " and then press enter.
    3. Type in " msiexec /regserver " and then press enter.
    4. Restart your PC and try the installation. Next, run this SFCS to try and repair any corrupt files in your OS:Using System File Checker to Restore System Files    Let me know the specific results please!Best wishes to you!Show thanks for my reply to help you today by hitting the "thumbs up" icon below!

  • HP Officejet 6210 All-in-One, print custom sized paper

    I need to print on  size 3 3/4 x 8 1/2 paper.  I click on custom size, then format the size, but it always reverts to 8 1/2 x 11.
    They suggested I go to the chooser to choose the Officejet 6210, but it is not one of the choices.  Is there another choice that would be compatible?  I'm on a deadline to print my daughter's wedding programs...any help would be appreciated!
    Is there something I could download to update my printer so it could print on this size paper?

    Yes, but it is hard to get working and only supports printing, not scanning.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP Officejet 4500 All-in-One Printer - G510g installation windows 8.1 64bit

    After operating a HP Officejet 4500 All-in-One Printer - G510g  from both an old Windows XP notebook and from an ASUS Windows 8, 64bit laptop, subsequently updated to 8.1; I'm now trying to install it to run from a Toshiba Satellite NB10T-A notebook Windows 8.1 64bit, but without success.
    The original installation CD does not provide an installation but on start up (presumably because it is only compatible with Windows XP and 7.
    The www.hp.com site offers a download of a full driver for the  printer, forWindows 8.162bit. This seems to download fine. The file unpacks, says it is installing, but on completion the driver is not available.
    There are no options to uninstall, either in control panel/printers or in control panel/software.
    Without the driver, the Windows 8.1 system recognises the printer and allows simple printing ffrom applications. However, it is not possible to use the scan options, giving the error message that the driver is not available. Neither HP Solution Center or HP Document Manager are installed.
    I have tried HP Print and Scan Doctor. This recognises the printer on USB link, says that there are missing drivers, downloads, unpacks and installs drivers. But the printer icon in control panel/printers continues to have an alarm icon and indicates that the printer is still missing drivers.
    I have also tried the HP Printer Installation Wizard. The result is similar.
    Please advise how I can install the scan options of this equipment and confirm that the machine is compatible with windows 8.1 64bit.
    Thank you
    This question was solved.
    View Solution.

    Hello @monc , welcome to the HP forums!
    I read through your post about how you cannot scan on your Windows 8.1 computer as the driver and software doesn't seem to be completing successfully on your system. However, you have been able to install the printer and its functioning fine on other computers.
    I would suggest checking the Control Panel to see if there are any printer files to uninstall: Uninstalling the Printer Software  
    Restart the PC afterwards
    Perform a Clean Boot
    Restart the PC again
    Download and install the printer again:  HP Officejet Full Feature Software and Driver
    If you see any error messages or codes during the installation process, make note of the exact problem or error and post me back a screen shot or the details.
    Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP OFFICEJET J4580 ALL IN ONE PRINTER

    I AM STAYING AT MY DAUGHTERS WITH MY LAPTOP, AND NEED TO KNOW HOW TO INSTALL HER HP OFFICEJET J5480 ALL IN ONE PRINTER, SO I CAN PRINT WITHOUT  HAVING TO E-MAILING TO MYSELF, AND THEN PRINTING OFF THE E-MAIL..I DON'T KNOW A LOT ABOUT COMPUTERS OR PRINTERS, SO PLEASE MAKE ANSWER AS BASIC AS POSSIBLE

    Hello HOWIERD. I understand you would like assistance on installing the printer on your daughter's computer. HP contains this website which will assist you with installing the printer: http://www8.hp.com/ca/en/support-topics/printer-installation/install-download-printer-drivers.html
    Please let me know if you found this useful or not. If you require further assistance, I will do my best to assist you.
    Mario
    I worked on behalf of HP.

  • I am trying to install a hp officejet 4215 all in one on a HP Pavilion slimline with Vista

    I am trying to install a hp officejet 4215 all in one on a HP  Pavilion slimline with Vista, I log in under myself and  I am an administrator, When I run the cd to install it shows that I need to be logged in as administrator, any help out there ?

    I am not sure why the HP software needs to recognize your airport. That's a function of the OS. Can you be more specific about the problem you are having? Do you have some screen shots? Is the Macbook connected to the router?
    If the HP printer can't recognized the router, that's a different story. You'll need to plug the Macbook into the printer (by cable) to config it (that's typical). You may need to assigne the printer its own static IP address (which I would advise doing anyway). That way you can always find it and it will make setting up network printers on other computers a bit easier.
    DB

  • I am trying to install HP officejet 5610 All-in-one printer.

    I am trying to install HP officejet 5610 All-in-one printer. When I go to system preferences --> print and scan --> add printer b clicking on + sign . There are no printers displayed in the pop- up window. Anyone can help?

    Hey drkafzal,
    Thanks for using Apple Support Communities.
    OS X Mavericks: Set up a printer
    http://support.apple.com/kb/PH14143
    Use this article to troubleshoot printer issues in OS X.
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Have a nice day,
    Mario

  • Using Mac OS 10.6 to drive  HP officejet 6210 all-in-one

    Have Mac mini using Mac OS 10.6 and HP officejet 6210 all-in-one. Cannot get HP 6210 to print program from OS 10.6.Will Mac OS support HP 6210?

    Welcome to the Apple discussions.
    Have you downloaded the HP printer drivers for the 6210: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76195-1 &lc=en&dlc=en&cc=us&os=219&product=421991&sw_lang=&key=null&site=null

  • Tying to re-install my hp officejet 6310 all in one with windows 7 op system

    Fomerally had this working great.  a tech had some type of patch which allowed this device to work with my Windows operating systerm instead of XP. I didn't make a back up disk and now I can't get it to load. Anyone come across this issue?

    Hi, Please download software and driver from the following link and install on your computer:     http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-6300-All-in-One-Printer-series/1120059/model/1120060#Z7_3054ICK0KGTE30AQO5O3KA30R1 Regards.

  • Looking for HP Basic Driver only for hp 2610 all-in-one printer

    I have windows 7( Just recently installed) and a HP 2610 all-in-one printer.
    I just wanted to download the printer driver only and not the HP Photosmart and office software Suite.
    This webside say the printer driver only is availble as a separate download named "HP Deskjet Basic Driver"
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76831-1&lc=en&dlc=en&cc=us&...
    But I cannot locate the webside for the Basic driver only for Windows 7 OS. Can somebody locate the web address of "HP Deskjet Basic Driver" for me please.
    Regards
    Tech

    I just tried using Notepad as you suggested and had the same result.  Paper feeds in stops at proper place and error message "out of paper" 
    I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem. 
    I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner.  One for black and one for color.  The ink icons would change from completly full to just an outline as the amount of ink went down.  Currently the black ink icon is missing
    This is a very frustrating problem because the printer works great after doing a few steps to get around the problem.  The fact that the problem reoccurs any time anything is changed is the major problem
    Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs.  This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
    I want to thank you for all of your efforts.  Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer.  As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

  • Officejet 7310xi All in One Printer no longer connects wirelessly

    Hello all,
    My Officejet 7310xi All in One Printer no longer connects wirelessly.
    The printer does no show up while searching for it wirelessly where it had previously.
    In the past it would say that the printer (HP Series 7300) was offline.  I would remove the device through the control panel and search again.  A printer would be found as HP Series 7300 (Copy 1) . A "ghost" of the original would remain as an offline device.  I would default to the new printer icon, Copy 1, and it would work.  This happened over the course of a year without any problems.
    Now nothing is working.  The printer can't be found by my network.  I tried downloading drivers, etc. from HP but they either can't download or stop during installation. I don't know if an Windows 8.1 update affected it.
    Although the printer has a built in  network set up option, it has no installation wizard.  I can't find a way to activate the wireless feature/icon.  There is no I.P. address either.
    I feel like a monkey pulling levers for a banana!  I appreciate your help.

    Hey @Kathlanta ,
    Thank you for taking the time out of your day to ask that question on the HP Forums today!
    I understand you are having issues with your HP Officejet 7310xi connecting and staying on your network. Going through all of this is making you feel much like this;
    By the end of this I want you feeling more like this;
    Now let's get to the bottom of this and have some fun doing it! (and no, I have not completely adopted the idea that you are a monkey, but for the time being, seems most fitting LOL )
    Ok, so what we are going to start with here is; a full print system uninstall and reinstall and run it through USB to test the printers functionality.
    Here is how you uninstall the whole printer software on 8.1 >> Uninstalling The Printer
    Here is how you install the drivers offline (use the appropriate links to get your steps) >> Installing HP Printer Software for a USB Connection in Windows 8
    You wont need to worry about the wireless right yet until we figure out if the rpinter hardware is ok or not. So sit tight on that portion, I'll get that all back and working later after we figure this stuff out now.
    Look forward to hearing back from you! Have a good one!
    I worked for HP.

  • Printing from 10.6.6 to an HP Officejet 6210xi All-in-One printer

    I have a brand new iMac - 27-inch, 3.2Ghz running 10.6.6 - connected to an older printer, an HP Officejet 6210xi All-in-One printer, and I am unable to print.
    Running the Printer System Preferences sees the printer via USB, and I install the print-drivers that come with Snow Leopard, but absolutely nothing prints. Trying to print just produces a useless "Error" error-message in the print-queue window, with no detailed explanation as to why.
    I have tried downloading and installing the latest MacOS print-driver from HP, but this doesn't help. I can't print a single page.
    I assume I should be using the print-drivers that come with Snow Leopard, but I have no idea why printing does not work. I can disconnect the USB cable from the new iMac, and connect it to my older iMac, running 10.4 and printing works fine. So I know that the USB cable and printer are OK. But if I move the USB cable to the new iMac, printing does not work at all.
    I have tried different USB ports on the new iMac, I have disconnected all USB cables and restarted the iMac, then re-connected only the USB cable to the printer, but no luck.
    Any ideas as to what else I can try?
    Thanks,
    --- Christer

    When you say you have installed the latest print driver from HP do you mean from the HP site or do you mean using Software Update/from Apple site?
    If you mean the All-in-one package that sits in your app folder try uninstalling that, (there is an uninstaller in it), and then try again with OSX.
    I think when you plug in your machine the Mac should recognise your printer and ask if you want to download the appropriate SW.
    So, my steps would be.....
    1). Uninstall the HP All in one.
    2).Restart.
    3). Plug in to Mac, (and power), and switch on 6210.
    4). Wait a few seconds for the Mac to recognise and prompt, or run Software Update.
    ......if still no joy;
    5). Re-apply combo updater.
    6). Plug in to Mac, (and power), and switch on 6210.
    7). Wait a few seconds for the Mac to recognise and prompt, or run Software Update.
    8). Come back and curse/thank me, then go back to the HP site and see if a more up to date package exists

Maybe you are looking for