Missing files after System Recovery, HP Pavillion G62, Windows 7, 64 bit.

My 5 month old laptop is showing signs of slowing down. When this occurs I do a system recovery in an effort to correct any problems. After completion of system recovery I always get the following error;
                         (the system cannot find the file specified (Ox80070002))
                           C:\users\owner\applicationdata\locallow.
                           C:\users\owner\contacts.
                           C:\users\owner\searches.
The notice is in Notepad. None of the files can be found with a search from the main menu. If no refererence to the files can be found how does the computer know they exist? My feeling is that the computer cannot operate up to speed with missing files?
I do have some other oddities occuring but I don't think you can solve anything if files are missing.

Those are user file locations and will not affect windows or how it runs, you can ignore that error.

Similar Messages

PLEASE PLEASE HELP lost files after system recovery

Hello Everyone,
I did a system recovery, using a backup from last year. However, I lost all saved files since that last backup, including some VERY IMPORTANT family pictures. Is there anything that I can do to get those files back? Please help me guys, I am so torn right now and it's tearing me apart. Thank you so much for any help.

Hi,
I have to agree with "lead_org", as the restore process might have left some "unrestored", but in the same time hidden part. So really in this situation, please try to use some "restore" tool, that will enable you to view "deleted" files.
Not really good news, I do understand it.
Cheers

Safe to delete files after Master Suite CS6 installation on Windows 7 , 64 bit system?

I installed Master Suite CS6 on a new Windows 7 , 64 bit system computer.
The computer has a small (120GB) SSD which has the operating system, and I'm trying to install the rest of my programs and data on larger, standard drives.
I just noticed that under C:/Users/Robert/Adobe CS6, I have a 6,504,448 KB MasterCollection_CS6_LS16.7Z file (Type 7Z File) and a MasterCollection_CS6_LS16 1031KB Application file
Can I delete the 6.5 GB 7z file or is that needed for operation?
What about the smaler one - is that for launching the applications or was that just to launch the installers?
I also have an 8.16 GBAdobe CS6 Master Collection folder on my Desktop (which is actually a 1TB regular hard drive as opposed to C:)
Inside this folder are two directories: Fonts (211 MB with lots of fonts inside), and Adobe CS6 (with subdirectories deploy; packages; payloads; resources; and a Set-up application 2163 KB
DO I need to save that folder, or was that just for installing the Master Suite?
Thanks for the help.

Thank you Bob.
Just to clarify - in terms of backing up one set of these, would that just be so I had it on disk and didn't need to re-download from Adobe if the installation got corrupted somehow? Or do I need a backup for some other reason?
Thanks

Missing file after system restore

Dear Sir,
today i performed on a tecra M2 a system restore, but suddenly the message came that i had to re-install the following file : <windows root>\system32\ntoskrnl.exe :
how do i do that : put in the recovery cd or just do a format of the disk with the recover cd ?
thanks in advance
drweekx

Hi,
System restore is very helpful tools but it's not the magic bullet! :-)
Your file "ntoskrnl.exe" seems to be damaged and this file is very important for you OS!
You can try to start up the notebook and press "F8" key. Then you will enter a menu and you can choose the " Last known good configuration" and the VGA Mode.
If you have luck your notebook works after that else you only can recover the whole notebook! But if you have important data on the NB you should safe it to an external disk!
Bye Chris

Problem restoring my files after system recovery

Hey so, I just recovered my system. The process had me backup all my files on an external harddrive. I now am trying to restore the files from the harddrive using the cyberlink recovery manager, the problem is that, everytime I run the app it freezes after about an hour. The progress bar remains at 0% even though i see files being copied below it. Any ideas on how to circumvent this? Do i need to use recovery manager? All the files in the folder are in some format that looks as though theyre useless without an app configuring them.

There is usually one file in the backup that has .EXE extension, maybe be named Restore.exe or Recovery.exe. Clicking it extracts the files.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Garage Band fails to open files after system recovery

I recent had to have my hard drive replaced. When I got home I did a fully recovery. I was able to use logic studio with no problem. Then I opened Garageband. I could see my files however when I try to open the files, the message reads that the file cannot be opened. I then tried to run the ILIFE 09 disk to see if reloading the software would help. It did not. Can anyone tell me what may be going on here and how to fix it?
Thanks

Delete the Garageband Preferences.

Lost Quickbooks data after System Recovery

Is there anyway to recover Quickbooks data after system recovery?

Quickbooks is an accounting tool designed and marketed by the Intuit Inc. mostly used for financially-related processes anywhere in any big or small organization. So, financial means quite important and very useful data to store..so there are number of possibilities of QBW file or QuickBooks database corruption.
Read More: http://www.filesrecoverytool.com/quickbooks-recovery.html
use free trail version demo

Installing software is happen and reboot nearly one day after system recovery.

HP installing software is happen and reboot nearly one day after system recovery.
I have done the recovery for my lap
1)After recovery done system get reboot and hp software installation menu has came.
2)HP software get installed , and then rebooot.
3)This HP software installation menu is come and reboot the pc and again it come. it doesn't finish
this is running more than 24 hrs.
4)please guide to resolve the issue.
System Model: HP Pavilion dv5 Notebook PC
Operating system: Windows Vista Home Premium
Please use the link to download the video of my problem, which used understand the issue:
https://www.dropbox.com/s/bf7e08lmdrn32t1/HPSoftwareInstall-1.rar
https://www.dropbox.com/s/4k4rug8pvs3w6qu/HPSoftwareInstall-2.rar

Satellite C75D-A7370
ordered recovery media from Toshiba and installed it. .... I tried to call Toshiba support, but because I am outside my warranty, I was told I would be charged for support.
It is running Windows 8..even though it is supposed to be on 8.1 (according to the sticker on the bottom of the laptop).
The product key is buried in the hardware.
According to the spec above, the original model shipped with Windows 8 and needed to be upgraded. My guess is that they later shipped the same model with Windows 8.1.
It appears Toshiba shipped the wrong recovery media.
Explain that when you call.

HP Pavillion g4 windows 7 64 bit startuP error "Status: 0xc000000f"

Hello Team,
I have HP Pavillion g4 windows 7 64 bit laptop.
I had installed android tool kit and restarted my laptop.After that my laptop is not booting UP.
I am getting below error "Status: 0xc000000f".
Windows Failed to start. A recent hardware or software change might be the cause. To fix the problem:
Insert your Windows installation disc and restart your computer.
Choose your language settings, and then click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
Status: 0xc000000f
Info: The boot selection failed because a required device is inaccessible.
I dont want to lose the data.
I dont have windows 7 installation CD.
How do I resolve this.
Your help is much appreciated.
Thanks
Shishir
This question was solved.
View Solution.

Hi,
Try the following.
If you don't already have one, use another PC to create a Windows 7 Rescue CD. Download the ISO file from the link below - this is not an installation disc, but will allow you to access the Recovery environment.
Windows 7 64bit
You should use an application such as ImgBurn ( Note: you may want to de-select the additional software options during the installation of ImgBurn ) to burn the ISO to a CD - a guide on using ImgBurn to write an ISO to a disc is Here.
When created, tap away at the esc key as soon as you start the notebook launch the Start-up Menu and then insert the Rescue CD. Select Boot options ( usually f9 ), use the arrow keys to select the CD/DVD drive and hit enter. You may also get a prompt to 'Press any key to continue' - do this if asked.
Select the 'Repair your Computer' option and follow Option 2 in the guide on the link below to run Start-up Repair – you may need to run this 2 or 3 times.
http://www.sevenforums.com/tutorials/668-system-recovery-options.html
If the above fails to help, make a note of any error messages you may get during the procedure and include them with your next post.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I have a PC running windows 7, 64 bit operating system which we upgraded from windows XP 32 bit. I can't download my photoshop elements which I bought as a download onto this 64 bit because it says it's for a 32 bit system

I have a PC running windows 7, 64 bit operating system which we upgraded from windows XP 32 bit. I can't download my photoshop elements which I bought as a download onto this 64 bit because it says it's for a 32 bit system

Hi claire.winteringham,
If you have a 64 bit machine then there shouldn't be any problem while installing any 32-bit software.
Try to download it with the below mentioned link :
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=en
Thanks,
Atul saini

Rescue and Recovery 4.3 on Windows 7 64 bit won't install

Hi,
I had to reinstall my Windows 7 and when I did that I accidentally wiped away the Recovery partition. I didn't think this would be a problem but now I am trying to install Rescue and Recovery 4.3 on Windows 7 64 bit and I keep getting this error
"Error 25014. There was an error installing the Rescue and Recovery boot manager. Return code: 6"
I am wondering why I am getting this error and how I can install Rescue and Recovery 4.3?

Hi,
can you also specify, how did you installed Win7?
Using Recovery CDs? or?
Note, that RnR needs to modify the boot loder of Windows and if the access is blocked, due to permissions, then this situation of course will happen.
However, there is also a second option, on how to get RnR installed and this is using a command line installation which will NOT install the RnR partition.
NOTE: the change in the boot loder is needed only for the creation of this RnR partition.
For more info, please read the following RnR manual:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/rnr43dg.pdf
Feel free to ask any other question.
Cheers

Hello I have an I mac with Yosemite operating system. I installed a windows seven 64 bit on it. also i have a parallels desk top with version 10. if i run my windows without parallels my windows and my office is activated ,but if i run my parallel

Hello
I have an I mac with Yosemite operating system.
I installed a windows seven 64 bit on it.
also i have a parallels desk top with version 10.
if i run my windows without parallels my windows and my office is activated ,but if i run my parallels then my windows and my office can not be activated .
My problem is activating my windows and office through parallels desktop .
i had installed windows an parallel desktop several times ,also i installed several times parallel tools with menu bar in parallels desk top and when i am installing parallels desktop tools in any way i can see the (CTRL+ALT )
all of my application in windows works properly through parallels desktop except
activation of office and windows .
I do not no any solution for my problem , i need for helps .thanks

It is not W10, it is the Technical Preview version of W10.
Search on the Windows forums (fora for the latinist) for activation in the TP W10.

How do I restore my backup (.wim files) after running HP System recovery on a G62 with windows 7

I had to do a system restore after getting a blue screen and I backed up the files on my external drive. after restoring the system I tried to restore my files from my external with Recovery manager but it didn't see my external so I couldn't restore. I copied and pasted the backup folder on my g62 desktop and tried again with no results. As far as I can tell the restore was done because my free space on the g 62 decreased by the same size as the backup, but when I open the c:\ drive I can't see the transfer. these are .wim files and I even tried to call tech service (my warranty juse expired) and they were trying to sell me extended warranty for the next year to help me. the problem exist with HP if they had good programs that follow up what it was meant to do maybe Today I wouldn't be here looking for help. when I restored the system, recovery told me the it would install my backup, but nothing happened leaving me hanging.NEED HELP!!!!!!!!!!!!!!

If you call AppleCare they will be more than willing to help you. Use the appropriate phone number on this page. Tell them you need a support related fulfillment - replacement disks. As shldr says there will be a small charge, but you will be able to install your system again.
Best of luck.

Missing Files After Deleting OS X System Folder from Disk

This is my first post; I'll try to be brief.
I got a new computer (G5 dual) and so wanted to "clean up" my G4 tower for my wife's use. I had three hard drives in the G4, one of which was an 80 GB drive with OS X (Tiger, I think) on it. Another drive had OS 9 on it.
I bought a 300 GB drive for the G4 and put Tiger on that drive. Then I moved OS 9 to the 80 GB drive. In the process, far as I can remember, I deleted only the OS X System Folder from the 80 GB drive (not any prominent folders that appear in "fancy" form on the left side of a Finder Window); so, one OS on each drive.
I deleted a number of files, and moved a number of files, in the process of doing my "clean up." Those files that I *moved* I can now find, no problem. But I left some files in the Movies folder (the "fancy" folder that is on the left side of a Finder Window in OS X) on the 80 GB, and those I now cannot find. My concern is that perhaps, in deleting the OS X System Folder from that drive I somehow either 1) also deleted the Movies Folder (inside the Home Folder inside the Users Folder) by the very act of deleting the System Folder (which seems unlikely to me) or 2) I managed to "hide" the Movies Folder by deleting the OS X System Folder.
I have far more available space on the 80 GB drive than I would expect to see, given the steps I had to take to get some files onto CDs, etc. (I needed all the space I could free up, as I recall). So, this suggests the missing files just might still be there. Spotlight can't see them; booting in OS 9 and using Sherlock doesn't reveal them....
Have I inadvertantly removed these files, or is there hope that they can be restored to life? A related question: If I did delete these files, is there a way to "un-delete" them at this stage?)
Many thanks for any thought anyone may have.
Bob ("rsimon")
G4 Tower (pre-mirror) Mac OS X (10.4.3) Also have G5 dual

If you did actually delete your valuable files, you want to stop using that computer as soon as possible. You'd have a good chance to recover deleted files, unless they're already overwritten by other data.
Boot your G4 in Firewire Target Disk Mode (hold down "T" at startup) and connect it to your new G5 using a Firewire cable.
The drives inside the G4 will mount as removable media, so you can browse them and try to find your movies folder. It should be located at
harddrive/user/username/movies.
You can use a utility like WhatSize to find large, (maybe hidden) files.
Post back, in case your data has disappeared and you need a file recovery tool.
Good luck.

Missing partitions after running Recovery from previous System Image Backup in Windows 8.1

After running Recovery from a recent Sytem Image Backup the LRS_ESP partition is now missing and the Used space on the PBR_DRV partition is reported as 95.20MB while it previously reported 9.52GB in use. The WINRE_DRV, SYSTEM_DRV, Windows8_OS and D:LENOVO partions appear to be OK.
I ran the Recover after replacing the original 500GB HDD with a 1TB. Any details/links/recommendations on recreating/correcting the LRS_ESP and PBR_DRV partitions? Thanks!

Here are the before and after partition details obtained through Partition Wizard:
Link to image 1
Link to image 2
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

Missing files after System Recovery, HP Pavillion G62, Windows 7, 64 bit.

Similar Messages

Maybe you are looking for