Missing files at install

i have installed elements 10 on my imac, copied all the images from iphoto 9,all the thumbnails are showing but  any one i click on i just get searching for missing file appearing any ideas please!

See this note:
http://kb2.adobe.com/cps/403/kb403605.html#main_Use_RAW_format_from_iPhoto_to_an_external_ image_editor_such_as_Photoshop_Elements_

Similar Messages

  • Missing files on installing driver for Sound Blaster Adio PCI 64v on win 9

    I've downloaded and run the file 373UP.exe. Then I got the message: Missing file eapci4m.ecw. So, I can't install the driver!!!
    Wher can I find this file?
    With tanks.
    P.S. I li've in Belgium, I'm dutch speaking and I bought in 999 a pentium 2 computer of Packard-Bell. Now I've installed win 98 SE and I needed the driver for my sound card!

    jorisvh,
    This knowledgebase case should cover how to load the wavesets (*.ecw).
    Cat

  • Missing files when installing SAP Front End

    When installing SAP front end, i am receiving following file missing error, please assist:
    The SAP Front-End Setup has not successfully installed all selected components on your computer, either because a component could not be installed or the process has been aborted.
    Click Finish to exit the wizard.
    The following program files are missing on the installation source:
    c:\sapexport34567\others\sapgui620\gui\windows\win32\sapgui\filc\odbc\mscreate.dir
    c:\sapexport34567\others\sapgui620\gui\windows\win32\sapgui\xxl\saplotgr.gid
    c:\sapexport34567\others\sapgui620\gui\windows\win32\sapgui\xxl\saplotuk.gid
    The installed applications may not function correctly until all program files are successfully installed. For detailed error descriptions, please open file://C:\SAPEXP1\Others\SAPGUI1\GUI\WINDOWS\WIN32\setup\saplogvw.exe .

    Hi Anand i dont know which sap version u are using but i think u should sapgui6.4,because may be it will install properly but there always will be some problem u have to face. so just download the Sap Gui 6.4.
    u can download it from here.
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6">sap Gui</a>
    Regards
    Subhash

  • Missing files while installing Developer2k 6i Release 2

    I'm trying to install various products from
    this including Forms, Reports etc. After the installation process gets through all the
    verifications and starts the actual file copying part, it gives me "File Not Found" errors. It trys to copy something from the /bin directory of the staging area into the $ORACLE_HOME/bin directory but says file not found.
    I don't know why it would try to use something that's not there.

    On my subscriber's download page, given by NI, there doesn't appear to exist such a choice unfortunately. It's iso or nothing.
    And worst of all, this "Fall 2014" subscription update/release is the first one that contains LV 2014 (which is required due to the newest CompactRIO system that I have to test not being compatible with earlier versions) so it's not like I can just try the Spring 2014 download either, since that would give me LabVIEW 2013 SP1.

  • Missing files on install of FDM 9.3.1

    I am in the middle of installing FDM.
    I am using the FDM_Instalation.pdf file.
    In the “Setting Up FDM Applications” section 9 pages 41 & 42 Importing Standard Reports it lists this file StandardReportsSQL930Active.zip as being in the support section of the Oracle E-Delivery site.
    I am not finding a support section or the file thiere.
    I have searched the OTN area and found a reference to the file saying it is downloaded during the install but I do not find it on my disk.
    Would someone please tell me how to get to it and if it is downloaded during the install where it would be?
    ALSO having the same problem with the Copying Standard Templates
    Thanks for any help on this.

    Hello,
    For this release it was a seperate download. If you no longer have the file you will need to open a non-technical service request for a media delivery as Oracle no longer maintains this release on eDelivery.
    Thank you,

  • Missing file after installing software for Officejet 6210 All-In-One printer.

    I got the following error message: "The file C:\{Program Files\HP\Digital Imaging\skins\oov1\skin.xml does not exist".  Can anyone tell me where to get the file and then how to download it?  Your help will be much appreciated.

    HI knewsomga,
    WIA is Windows Image Acquisition, it is a proprietary Microsoft driver model and application programming interface (API) for Microsoft Windows Me and later Windows operating systems that enables graphics software to communicate with imaging hardware such as scanners, digital cameras and Digital Video-equipment. - Source
     Please follow the instructions below.
    Please hold down the windows flag key and the R to open the Run box.
    Type services.msc and press Enter
    Locate Windows Image Acquisition (WIA)
    Right click and open Properties
    Stop the service from the General tab and then Start it again
    Verify that the Startup type is set to Automatic rather then manual
    Also, look for 'Shell Hardware Detection' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically from its properties.
    Locate the 'Remote Procedure Call (RPC)' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically as well.
    If the issue persist, the HP Print and Scan Dr might help, otherwise I suggest contacting Microsoft.
    Click here to download and run the utility > HP Print and Scan Doctor
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • TS1368 I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    Click here and follow the instructions.
    (98897)

  • Cannot install driver due to missing files - BlockSysUs​er and hpzpnp.ice​_suffix

    I have just purchased a new Dell with Windows 7 64-bit and am trying to install the driver for my oldie-but-goodie OfficeJet 6310.  I am having the same problem with BlockSysUser as has appeared numerous times, and have tried all of the posted solutions.  I downloaded the driver from the website.
    I can get past the BlockSysUser issue by creating another folder called ".SourcePath.setup" and copying the BlockSysUser file that resides in Setup.  However, I then get a missing file hpzpnp.ice_suffix.exe, which I cannot find in any of the other folders.  It seems to be looking for this also in ".SourcePath.setup".
    I can install the printer using Windows, but then I don't have the other good stuff.
    This problem seems to have been around for YEARS!  Why hasn't it been resolved through driver updates?
    Help!

    Hi DForm,
    It's okay regarding the log file, I did some more research for you and found these steps:
    Turn off Anti-Virus (McAffee in this case). How to Disable McAfee Antivirus.
    Disabled the firewall. Turn Windows Firewall on or off.
    Perform a L4 uninstall. (a) On the keyboard, hit the Windows and "R" key, then type %temp% and hit enter. b) Locate the correct folder starting with "7z" (the correct folder contains "Util" and "CCC" folders).  c) Open folder "Util". d) Open folder "CCC".  e) Please run the L4uninstall.bat. f) When the uninstall has completed, restart the computer).
    Disabled startup and non MS services. Disable startup items and non-Microsoft services.
    Restart the computer.
    Run setup as admin. How do I run an application once with a full administrator access token.
    Hope this solves the issue, and hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Exchange Server 2013 Missing file on ISO install Error Code 1603

    Hi all,   a mystery needs solving any suggestions much appreciated:
    We are trying to install Exchange Server 2013 on Windows 2012 server.
    The ISO File being used is: SW_DVD9_Exchange_Svr_2013w_SP1_MultiLang_Std_Ent_MLF_X19-35118
    All preparation and requisites in place.
    During Stage 2 Copying files, we receive an error code 1603 and installation halts.
    The error states:
    Installing product F:\exchangeserver.msi failed. Fatal error during installation. Error code is 1603. Last error reported by the MSI package is 'Source file not found: F:\Setup\ServerRoles\ClientAccess\Owa\prem\version\resources\themes\base\0\microsoft.o365.controls.timeline.mouse.css.
     Verify that the file exists and that you can access it.'.
    We have verified that the Path in the error is correct and exists BUT the file is not present within the 0 folder.
    We have downloaded the ISO from our Action Pack resources twice and attempted 4 separate installations.
    We have tried both Mailbox/Client Access  and Mailbox only installations.
    The missing file: microsoft.o365.controls.timeline.mouse.css. Hopefully the only file misisng???
    Any ideas anyone, could we source a different ISO or copy of the file or ?????
    Many thanks in advance

    Had the same issue with Exchange 2013 SP 1 Downloaded as an ISO from the Volume License Center, installing on a new Server 2012R2 STD box. I found the equivalent file in another ISO but discovered it was just an empty CSS file. So the easiest way is to not
    bother trying to find the file but: 1) open notepad, 2) set save to "All Files", and 3) save an empty CSS file with that filename then place it in the directory indicated in the path given in the error. (Make sure it saves as
    a CSS and not as a TXT.)
    I reran the install and it completed without issue.

  • My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it via internet the first time december 2013?)

    My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it from Adobe via internet the first time december 2013?)

    Did you download the Basic/Free version?
    I also thought the Trial period was as long as you needed!?
    What is your Warranty and Return Policy?
    You get to use VueScan for as long as you want before you buy it, so we recommend you test it before you buy it to make sure it meets your needs.
    All sales are final and there are no refunds.
    Isn't this a bit harsh? Naah I actually prefer to solve problems, and if I offer refunds, people give up too easily. If I can't solve your problem after you send a few Problem Reports (see above), I'm happy to give a refund.
    http://www.hamrick.com/sup.html#q

  • I downloaded the 32 bit version of photoshop cc 2014. When trying to install I get the message that installer failed to initialize and that this could be due to a missing file. Has anybody a solution ?

    I downloaded the 32 bit version of photoshop cc 2014. When trying to install I get the message that installer failed to initialize and that this could be due to a missing file. Has anybody a solution>?

    Did you unzip the entire contents of the download zip file onto your hard drive before running the installer?  You need to do that.
    I have installed it myself and it went in just fine.
    -Noel

  • TS3694 Trying to install new version of I tunes. Get the following error msgs:Itunes not installed correctly reinstall (Windows error 126), and missing file MSVCR80.DLL?

    Trying to upgrade Itunes get the following error msgs: Itunes not installed correctly reinstall (Windows error 126) and missing file MSVCR80.DLL?

    Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
    (98972)

  • "Itunes missing files - please re-install"

    Hi I wonder if anyone can help me. I am having major problems ever since i downloaded the newest update. Cant access my itunes now as keep getting a message that says there are files missing and that I need to reinstall itunes. Have tried over and over to re-install but still keep getting the same message!! Many thanks,

    Aichenelf,
    I cannot thank you enough for your post! I upgraded my iTunes because some of the freebie songs on Tuesday said they required a higher version of iTunes. Wow! The two weeks since that fateful day have been filled with problem after problem. The 7.5 would not work on my machine, and I got the same "missing files" error. I also got errors that said the QuickTime would not work and that iTunes required QuickTime. I uninstalled all Apple products and tried to reinstall older versions but was not allowed to by the software. I was pulling my hair out. Finally, I read somewhere to go to the directory called WINDOWS\Downloaded Applications\ and to delete any previous versions of iTunesSetup.exe. I also obtained the version 7.2 of QuickTime by itself and installed it on its own. Then, I reinstalled 7.4.3. It took tons of time and tons of trial-and-error to resolve this ridiculous issue. I say "ridiculous" because there is no reason that I can see for artists to insist that their fans use the most recent version of a software. Not everyone can afford to go out and get a new computer to run all this stuff. I digress --> Free or not, I won't go there again. Thanks for listing the older software verions' release numbers ... Made my life a lot simpler. I obtained my older versions by doing a Google search that led me to a place called the File Hippo. Anyhow, hope this can help others who got into the same situation! Back up your library before uninstalling, too! I renamed mine to simply "Music" and have successfully reimported it since the fix. Not sure if my playlists are gone forever, but can recreate them a lot easier than reloading music. Peace & good luck ... I know how frustrating this is !!!

  • Missing File error when trying to install HP 5610xi using Windows 7 64 bit download

    I have tried several times to download and install the software and drivers for my old 5610xi on my new computer running Windows 7 Home Premium 64-bit OS. I keep getting a "missing file" message when trying to run the download, and it will not install. Can someone please help!?!?

    Hi computeir, sorry to hear that you are having issues with getting your printer installed on to your computer. If you are connecting the printer to the computer with a usb cable, please remove it from the printer and the computer and set it aside. Please click the link I have provided for the HP Printer Install Wizard for Windows.
    The installation will prompt you as to when to connect the usb cable. If you are still having issues, please feel free to write back.
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Missing file system after installing in SSD

    Missing file system after installing in SSD MacBook
    Hi All
    I recently installed a SSD drive in my Macbook, I used the Disk Utility to clone the old HDD.
    When i reboot the machine with the new disk I get the image of a folder with question mark.
    If i reboot the machine again and hold the alt key at the chime I can see two disks.
    One called SSD and another called Recovery.
    if i choose the SSD the OS starts as normal and if i choose the recovery option and check the disk with disk utility
    it tells me that everything is fine.
    Any ideas how i can make the machine boot as it should without having to hold down the alt key a start up??

    Hi i tried this and just got the big symbol of doom at start up.
    However, a little terminal witchcraft did the trick!
    sudo bless -mount /Volumes/"Macintosh HD" -setBoot

Maybe you are looking for