Missing files, but none have an "!" next to it.

Every time I find a missing file, I get a message saying I have 3 more missing files, but none in my Library have an "!" next to it. The message is driving me nuts. How can I find these three files?

The ! in iTunes means that iTunes can't find the actual music file. See:
iTunes: Finding lost media and downloads
If necessary, you can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Similar Messages

I have just updated to Final Cut Pro 10.1.4 - I have updated Projects and Events on my external hard drives (off the File menu). It's says under several project 'missing file' - but they were all there working fine before I updated.

I have just updated to Final Cut Pro 10.1.4 - I have updated Projects and Events on my external hard drives (off the File menu). It's says under several projects 'missing file' - but they were all there working fine before I updated. I am working off 2 external drives - not sure if that would make a difference.

After the update each seperate connected drive should now have a seperate Library.
The older Projects and Events folders would have to be at the top level of those drives go be seen and updated.
Were all the necessary Projects and Events in the corrrct place before updating?
Al

Screen(s) found, but none have a usable configuration

Yes, I searched for this topic and found others with the same issue, but none of their solutions seemed to work for me.
I am running this all on a late 2008 Macbook Pro (first round of unibodies).
When I run startx, it fails, giving several errors, including "Screen(s) found, but none have a usable configuration"
The output to # lspci | grep VGA:
02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9600M GT] (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation C79 [GeForce 9400M] (rev b1)
the output of the log file includes...
(EE) Failed to load module "nvidia" (module does not exist, 0)
(EE) Failed to load module "nv" (module does not exist, 0)
(EE) Failed to load module "modesetting" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) [drm] KMS not enabled
(EE) VESA(0): V_BIOS address 0xd00 out of range
(EE) Screen(s) found, but none have a usable configuration
I have nouveau installed, and I added it to /etc/mkinitcpio.conf then ran # mkinitcpio -p linux, rebooted, and still got this message. I'm not sure why KMS is not enabled, I thought that would enable it.
I've read that the screen not found message might be a result of me running nomodeset as a boot parameter, but if I don't have nomodeset, my boot fails.
Any help would be greatly appreciated
Edit: Also worth noting that when I try to install the nvidia package, it fails
Last edited by davidjosepha (2013-02-23 17:26:06)

Yes, I searched for this topic and found others with the same issue, but none of their solutions seemed to work for me.
I am running this all on a late 2008 Macbook Pro (first round of unibodies).
When I run startx, it fails, giving several errors, including "Screen(s) found, but none have a usable configuration"
The output to # lspci | grep VGA:
02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9600M GT] (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation C79 [GeForce 9400M] (rev b1)
the output of the log file includes...
(EE) Failed to load module "nvidia" (module does not exist, 0)
(EE) Failed to load module "nv" (module does not exist, 0)
(EE) Failed to load module "modesetting" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) [drm] KMS not enabled
(EE) VESA(0): V_BIOS address 0xd00 out of range
(EE) Screen(s) found, but none have a usable configuration
I have nouveau installed, and I added it to /etc/mkinitcpio.conf then ran # mkinitcpio -p linux, rebooted, and still got this message. I'm not sure why KMS is not enabled, I thought that would enable it.
I've read that the screen not found message might be a result of me running nomodeset as a boot parameter, but if I don't have nomodeset, my boot fails.
Any help would be greatly appreciated
Edit: Also worth noting that when I try to install the nvidia package, it fails
Last edited by davidjosepha (2013-02-23 17:26:06)

I have 300 apps organized in folders on my ipod touch 4th gen, and connected my iphone 4, these apps have copied over but none have been placed in folders, any ideas how to replicate folders from ipod to iphone...?

I have 300 apps organized in folders on my ipod touch 4th gen, and connected my iphone 4, these apps have copied over but none have been placed in folders, any ideas how to replicate folders from ipod to iphone...?

What may work is to restore the iPhone fom the backup of the iPod. However, if the two devices ahve different apps that come with the device, that may mess up some of the folders.

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
Sorry for the long title, first time poster here.

This thread is pretty old, are you still having this issue?

I have multiple libraries in my itunes folder but none have the correct songs

there seems to be double up folders of Purchased on my Itunes, but none have the downloaded music i have bought.
I click on check available downloads and nothing happens.

Sometimes people run up against this when they have iPhone-only apps in iTunes and try to sync them. They either do or dont get sync'ed over, actually moved I mean, althogh you will get indications that they are present. You won't see their icons, though, in any of the Home pages.

Startx fail: "screen(s) found, but none have a usable configuration"

Hi all
I've been stuck on this one all day - crawling through forum post, wikis and google! I still can't get it fixed, so I hope that someone could either point me in the right direction or give me a few hints...
I'm installing Arch as per the Beginner's Guide wiki. I'm using a pretty old machine. If I run lspci then the video card seems to be an S3 Unichrome Pro (CN400/PM800/PM880/PN800/PN880).
I got to running 'startx' and it failed, so I ran 'grep EE /var/log/Xorg.0.log' and this came out:
(EE) UNICHROME(0): No active output found.
(EE) UNICHROME(0): No outputs possible.
(EE) Screen(s) found, but none have a usable configuration
'startx' always ends up with 'Fatal server error: no screens found'.
I've tried the solutions posted up in older posts, with no joy so far. I'd be grateful for any advice!
Thanks!
custard.

I have a laptop with an S3 UniChrome Pro adapter:
01:00.0 VGA compatible controller: VIA Technologies, Inc. CN700/P4M800 Pro/P4M80
It works for me with the OpenChrome adapter. I had to explicitly set the display size:
/etc/xorg.conf.d/15-openchrome.conf
Section "Device"
Identifier "via-adapter"
Driver "openchrome"
Option "PanelSize" "1280x800"
EndSection
Section "Screen"
Identifier "My laptop screen"
Monitor "My laptop panel"
Device "Configured video device"
SubSection "Display"
Virtual 1280 800
EndSubSection
EndSection
Test with a basic window manager+xterm in your .xinitrc to make sure a desktop environment is not interfering with the pure xorg settings.

I have a ipad2, ipad3, and iPod touch that had location service working and now none of them can use location service. I have tried so many recommended tweaks but none have helped. So frustrating! Can anyone help ?

I have a ipad2, ipad3, and iPod touch that had location service working and now none of them can use location service. I have tried so many recommended tweaks but none have helped. So frustrating! Can anyone help ? Wifi only devices

Sounds like it's hardware issue. The iPhone warranty is based in the original country of purchase. Since it was bought in Korea you will need to ship the phone to someone you know in Korea to be taken in and then they will have to ship it back to you. The cost of shipping will be at your expense.

I have just inherited my husbands ipad, all transferred well except my hotmail account will not set up, I have read all forums but none have helped, keep getting "can not verify" when I try set it up. I have removed email and re added, turn

I have just inherited my husbands ipad, all transferred well except my hotmail account will not set up, I have read all forums but none have helped, keep getting "can not verify" when I try set it up. I have removed email and re added, turned on off iPad and iPhone but neither will set up, I have given up and forwarded all new emails from hotmail to icloud until I sort this out. Please help it's doing my brain in!!!! Thanks

You need to turn off find my ipad in settings
Then restore to factory settings ipad will then be
as new then enter you Apple ID and password
bsydd uk

I have 14GB for Movie File But I have Movie File only 1GB. I don't know where the other ?

I have 14GB for Movie File But I have Movie File only 1GB. I don't know where the other ?

Type .mov into Spotlight search to see if any files show, other than the one you know about.
Also you can try other types like .mp4
Al

I have tried several published methods for using umlauts but none have worked. I have used the IPad 2 with the screen keyboard and the Logitech keyboard, all to no avail.

I have tried several methods for using umlauts but none have worked. These include the screen keyboard and a Logitech keyboard. I tried pressing and holding an o for several seconds then (while holding the o down, pressed the o umlaut in the pop-up screen with no results.

Instead of using a second finger to press the umlaut while holding down the o key try this:
Tap and hold on the o until you see the alternate choices then slide your finger up to the umlaut.

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files but still have them on the TC for future reference..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?

It's not a good idea to use a network disk for both Time Machine backups and other things. By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files. I'd store those other files on an external disk connected to the Time Capsule. The problem with that is that Time Machine will only back up files that are local to your Mac. That means that you'll only have one copy of the files on or attached to your Time Capsule.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

In documents I can open pdf files but none of the others

When I go to documents I can open pdf files but nothing else. Same on downloads. I have lots of info I've downloaded over time and I often use it. Can I just go back and use internet explorer for that and if so how?

Opening in the side bar is the default for bookmarks that are created via a link or button on a website.<br />
You can check the Properties of a bookmark via the right-click context menu in the side bar (Ctrl+B; Cmd+B on Mac).<br />
In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.<br />
Make sure that "Load this bookmark in the side bar" is not selected.<br />

I am trying to read in a .txt file, but I have a FileNotFound Exception

So I am trying to read in as5.txt. It is located in the Assignment5 folder. I probably just have the syntax wrong, but can someone help me?
import java.util.Scanner;
import javax.swing.JFrame;
import java.awt.Color;
import java.io.*;
public class Driver {
     public static void main(String [] args){
          JFrame window = new JFrame ("Window");//This creates the window
          window.setBounds(30, 100, 700, 700);
          window.setVisible(true);
          window.setLayout(null);
          FileReader as5 = new FileReader("Assignment5.as5.txt");
          Scanner file = new Scanner(as5);
          GameSquare square = new GameSquare(window, 0, 0);
          GameSquare[][] board = new GameSquare[8][8];
          int x = 0;
          int y = 0;
          for(int i=0;i < 8; i++){
               for(int j=0;j < 8; j++){
                    board[i][j] = new GameSquare(window, x, y);
                    x=x+80;
               x=0;
               y=y+80;
}

If you think a file doesn't exists when you think it should, you can use code like this to print out what files are there:
import java.io.*;
public class Periscope {
    public static void check(File file) {
        if (file.exists()) {
            System.out.println("file exists: " + getPath(file));
            System.out.println();
            System.out.println("DUMP:");
            System.out.println();
            dump(file, "");
        } else {
            System.out.println("file does not exist: " + getPath(file));
            goUp(file);
    static void goUp(File file) {
        File parent = file.getAbsoluteFile().getParentFile();
        if (parent == null) {
            System.out.println("file does not have a parent: " + getPath(file));
        } else {
            check(parent);
    static void dump(File file, String indent) {
        System.out.println(indent + getPath(file));
        File[] children = file.listFiles();
        if (children != null) {
            indent += "    ";
            for(File child : children) {
                dump(child, indent);
    static String getPath(File file) {
        try {
            return file.getCanonicalPath();
        } catch (IOException e) {
            e.printStackTrace();
            return file.getName();
    public static void main(String[] args) {
        check(new File("foo.bar"));
}

I can't find missing files but I see the files on pc but I can't use recconnect feature

Help with missing file ? beside photo ??

Migration Assistant creates a new user with the transferred files. Go to  > Log Out and log in the new user

Missing files, but none have an "!" next to it.

Similar Messages

Maybe you are looking for