Missing files following time machine restore

I recently had my hard drive replaced by Apple following a recall of the particular drive installed in my machine when I bought it. Before taking it into Apple I had completely backed up my machine onto an external drive using Time Machine. Once the drive was replaced I restored the system using Time Machine but since have noticed a couple of quirks.
The first is that I'm missing files from iPhoto. The missing files are from my most recent upload and are a combination of images and video which were uploaded together. iPhoto knows they should be there because it's showing the file name (and video length for the video files) but the files themselves are missing and cannot be found when searching for them in Spotlight or when using the "show file" option in iPhoto.
The other major bugbear is that I'm missing a lot of my album artwork within iTunes - this includes for music, TV shows and movies. These were all there before the hard drive was replaced but are missing following the reinstall.
Fortunately I asked Apple to provide me with the original drive which I have but I'm unsure about what I need to do to fix the two issues above. Any advice would be greatly appreciated.

Restore your iPhoto and iTunes libraries in the time-travel interface. If that doesn't work, try an older snapshot. Some files may be missing because the drive was malfunctioning. That was the reason for the recall.

Similar Messages

  • Missing iPhoto files after time machine restore from Snow Leopard

    My Snow Leopard machine HD failed the day after my new MacBook Air (Lion) arrived.  Migration assistant allowed me to use Time Machine to restore my iPhoto files from my external HD.  However, many of the photos are apparently gone, although the thumbnails remain (selecting the thumbnail results in a big exclamation point in a triangle).  I've tried repairing the iPhoto Library and updating the thumbnails, but still many photos can't be found.  I think I may have to fix the old machine, then try to restore that way, but would like to access the photos now.  Any suggestions?

    Back up no matter what,  then
    either  way with time machine and restore or
    Target disc mode. You should be able to move the entire iPhoto Library

  • Missing photos after time machine restore

    Hello
    I recently restored my new 15 MBP from a time machine backup. The restore seemed to go successfully. When I open up iphoto, all the event and photo thumbnails show up normally. When I click on an event, I can see all the thumbnails just fine. The problem arises when I click on a specific photo to enlarge it or go full screen. My screen just appears black with no photo showing up. Interestingly enough, when I drag the photo onto the desktop and open it in preview it appears just fine too. Anyone know how can i fix this? Much appreciated

    Try the two fixes below in order as necessary:
    Fix #1
    Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the last three options.
    Click to view full size
    Fix #2
    Rebuild the library using iPhoto Library Manager as follows:
    Using iPhoto Library Manager to Rebuild Your iPhoto Library
    1 -Download iPhoto Library Manager and launch.
    2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
    4 - In the next window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be untouched for further attempts at fixing or in case the rebuilt library is not satisfactory.
    OT

  • MISSING  Video after Time Machine Restore

    Hi All.
    I had a drive go bad and had to buy a new one and restore from Time Capsule. I am noticing that I am missing a slideshow video that I spend a good deal of time creating. I went from a 500 GB to a 1 TB drive which I assume does not matter. The slideshow was in a Project folder.
    I also noticed that I am missing a recent import of about 20 images that were in this folder but I have to take a look to see if there are /other/ images from this same import that I put into different projects (I imported photos from a digital camera and I /moved/ them to the Projects they belonged within).
    It is possible that I have a more recent backup on my external portable USB drive than was on the Time Capsule, and I am wondering if there is an easy way to search for this information either on my external USB or on the Time Capsule.
    I can't honestly say /why/ this slideshow and the images are missing but they are...I /can/ see that the last import of photos may have been so recent as to not make a schedule TM backup but it seems very odd that the video that was on there for a number of days would not be in the backup...
    Thanks. I'm new to mac and to Aperture.

    Hi again.
    I had a drive go bad and had to buy a new one and restore from Time Capsule. I am noticing that I am missing a slideshow video that I spend a good deal of time creating.
    Yes, I remember you working on that.
    I went from a 500 GB to a 1 TB drive which I assume does not matter. The slideshow was in a Project folder.
    The size won't matter.
    It is possible that I have a more recent backup on my external portable USB drive than was on the Time Capsule, and I am wondering if there is an easy way to search for this information either on my external USB or on the Time Capsule.
    In the Finder you can use the File>Find file command to search for the missing files. You can also use spotlight (cmd spacebar) to search for it.
    I can't honestly say /why/ this slideshow and the images are missing but they are...I /can/ see that the last import of photos may have been so recent as to not make a schedule TM backup but it seems very odd that the video that was on there for a number of days would not be in the backup...
    There have been reports of a number of incidents using TimeMachine:
    If it's on a wireless network it is unreliable - all wireless network disks are unreliable with Aperture.
    If Aperture is running TimeMachine does not make any backups from it.
    Backups are combined as the days and weeks go by. Some items will, inevitably, not be available after that.

  • Missing apps after Time Machine restore after internal HD crash.

    2 TB internal HD on 2011 iMac crashed.  Apple store replaced hard drive.  It took 25 hours to restore from the Time Machine backup.  Immediately I noticed that many of the desktop icons were missing and were replaced by large question marks.  These include App Store, Mail, Firefox, iTunes, iMovie, iDVD, Safari, Quicktime Player, Photo Booth, Garageband, and Facetime.  When I select  Software Update...  I get no response.  I have no install media as it all came installed on the iMac I bought last year.  I am on Mountain Lion.  I turned off Time Machine to not confuse matters more.  thx

    Was able to get Firefox from a locally networked old Powerbook.  Connected to internet and downloaded iTunes 10.6.3.  Bookmarks and all music seems to be ok.  Now I just need a was to find which app is missing for "Software update..." and "App store...".

  • Cannot find files after time machine restore

    I have reinstalled my mac mini with Lion.  After installation, I have restored the files from my time machine backup, files have been copied with window showing the copying progress.
    But after the copying, I can't find the files/apps in the new system that should exisit in the backup of time machine.
    I have tried restore different folders but still no change can be seen.
    Anything wrong or what's the problem?

    Hmmm, get Find Any File...
    http://apps.tempel.org/FindAnyFile/
    Hold Option or alt key when selecting Find to Find All.
    Search for some unique file or even part that should've been imported/migrated.

  • User Account Passwords Not Working Following Time Machine Restore

    Hard Drive failed; restored using Time Machine, but the Passwords for two user account don't work.  The "hints" are correct.
    Help, please.
    JD

    Can they be altered from another admin account?
    Sound like they were backed up when the drive was failing & we have some corruption.

  • How to restore files from Time Machine after Clean Install of Mavericks

    How to restore files from Time Machine after Clean Install of Mavericks. I know the data is there but seems unaccessable because I may have changed the Computer or Owner name. Is there any way to fix that now?

    Hi Linc,
    my back-up data is managed by Time Machine; the actual data is on a second internal Hard Drive with a capacity of 1TB - not partitioned. I am using Time Machine and have access to all data backed up since Mavericks Clean Install but not the data prior to this date.
    When I open the 1TB drive in Finder I can see a folder "Backups.backupdb/Sigi's Mac Pro/ followed by many folders of backup dates going back to 2010-09-20-103441 and up to 2014-02-07-142414 all followed with folder Macintosh HD.  February 7th  2014 was the date of the clean install.
    These Backups are followed by backup date folder 2014-02-08-075554 with a subfolder of MacPro-320GB (this is the name I assigned to my Boot Drive during formatting; I suspect I should have assigned the same name as before ie. Macintosh HD) and 2014-02-11 with a subfolder Macintosh HD, these are the ones I get access to by way of Time Machine > Restore.
    Weird thing is on Febr 11 when I relised my possible mistake and renamed the Bootdrive back to what it was initially ie. Macintosh HD despite this I have access to all backup data since the Clean Install in both folders MacPro-320GB as well as Macintosh HD but not to any data prior to the Clean Install.
    Is there something that Time Machine knows and prevents access or is it simply a matter of renaming the subfolder 2014-02-08-07554/MacPro-320GB to ........./Macintosh HD?
    I like to restore selectively and not everything - It was hard work reinstalling apps that were supposed to be the troublemakers (ref my discussion on Maverick problems) but I now need to get onto data specific to some of these apps as well as other data I may have missed. Long story? Yes and sorry.
    Sigi

  • ALL Photos missing after Time Machine restore  (help)

    So, I accidently formated the wrong drive while in Windows, (big oops) which gave me the opportunity to take Time Machine for a test drive.
    I put the DVD in, and was able to restore from the TIme Machine drive. Very impressed! Everything came back just as I had left it except - whats this? The default Leopard wallpaper instead of a picture of my son? Huh strange, I thought. Until I noticed I had no photos in iPhoto.
    There seems to be reminents of photos in the iphoto database - the size is 1.3gb instead of the 7gb it used to be. But 0 photos in iPhoto 08.
    I went into iPhoto and choose File/Browse Backups. I selected Nov 8th, which was the last day of my backup and showed all 7000+ photos, and clicked "Restore All". This brought up something odd - a 2nd iPhoto icon in the dock, which showed a progress bar for the restore. Once the restore was completed, I still had a 2nd iPhoto icon the the bar, which was iPhoto running - but no photos in iphoto! I exited the 2nd iphoto, which disappeared, and launched my normal Iphoto icon. Still no photos! (That just seems odd that it would launch iPhoto with a 2nd icon)
    So, I moved my iphoto database, and launch iPhoto in order to create a fresh database - thinking maybe that was the issue. I then did File/Restore again, and went through the whole processes again, including the odd 2nd icon. Still, no photos! And another 1.3gb iphoto database!
    Is it normal for a Time Machine restore to not include your photos? Surely you are not supposed to restore them separately from within Iphoto?
    What do I do now? At this point, everything went very well - except no photos! Which is awful and not at all expected! 7000+ family photos! At least, if I ask iPhoto/Time Machine to restore 'all photos' you would think it would restore 'all photos' - not show a progress bar, and then show me no photos!
    p.s. I just tooked at the iPhoto Library. The 1.3gb is in /Data/ which contains folders 2000-2007, my Events, and thumbnails of all the photos - but no actual photos (the 'Originals' folder is missing).
    I then went back in time, and found the 8gb iPhoto Library database. I supposed I could copy it over manually via Time Machine, and not iPhoto's Restore/TM - but - i'm so far off track of how this should have went I don't know what to think!
    p.s.s. So I did just that - copied the 8gb iPhoto Library manually from TM, and pasted it in place. I help down option, and launch iPhoto, selecting the 8gb library - and BOOM... no photos!
    Something is #$%# up here.
    Message was edited by: metzen79

    This is what it says in the help file:
    Reverting to a previous Mac OS X version
    If you’ve used Time Machine to back up your computer, you can easily revert to a previous version of Mac OS X if you’re experiencing trouble after installing an update.
    IMPORTANT: Reverting to the previous version of Mac OS X will erase any additions or changes you’ve made to the files on your computer after installing the new version of Mac OS X. To save new or revised files, copy them onto a different disk or back them up using Time Machine before you follow these instructions. Use Time Machine only if you’re reverting to a previous version of Mac OS X 10.5 (Leopard), since Time Machine is not available with Mac OS X 10.4 or earlier.
    To revert to a previous version of Mac OS X:
    Insert the disc you used to install the new version of Mac OS X, and double-click the Install Mac OS X icon.
    In the Installer, choose Utilities > Restore System From Backup.
    In the Restore Your System dialog, click Continue.
    Select your Time Machine backup volume.
    Select the Time Machine backup you want to restore. To restore your computer to the state it was in before you installed a new version of Mac OS X, choose the most recent backup.
    Follow the onscreen instructions.
    If you backed up any individual files as described under the Important message above, you can restore them now. If you backed them up using Time Machine, recover them using the Time Machine application. (You’ll find the Time Machine application in the Dock or in the Applications folder.)
    Hope this helps
    Denisimo

  • Time Machine restore leads to strange file permission issues

    I've had three Mac laptops over the last 8 years. It all started with an iBook. When I bought my first MBP I used the "migration assistant" to move my files over. I started using Time Machine when it was released. I then upgraded the hard drive on the MBP and used Time Machine to restore the data. Later, I bought another MBP and used Time Machine to transition all of my files.
    Each Time Machine restore was flawless.
    The problem comes from my most recent hard drive upgrade (details are below). After upgrading the hard drive on the second MBP I did a Time Machine restore, which appeared to complete without incident. However a couple of problems, which are probably related, have cropped up.
    After clicking on Firefox.app I get "Profile Missing Your Firefox profile cannot be loaded. It may be missing or inaccessible."
    The following message is printed to the console: [0x0-0x31031].org.mozilla.firefox[493]: Error: Access was denied while trying to open files in your profile directory. com.apple.launchd.peruser.501[275] ([0x0-0x31031].org.mozilla.firefox[493]): Exited with exit code: 1
    I tried to delete my old profile from ~/Library/Application Support/Firefox and the problem persists. Running /Applications/Firefox.app/Contents/MacOS/firefox-bin -ProfileManager results in the same error.
    The file permissions on the ~/Library/Application Support/Firefox directory are:
    drwxrwxr-x 2 my_name staff 68B Feb 20 08:31 Firefox
    I'm at a loss here because the permissions look correct. When I run the ProfileManager as "sudo" it starts correctly and let's me edit/create a profile for "root".
    I've repaired permissions several times, and the disk utility (and Onyx) don't report any problems. A very similar problem occurs for MS Office problems. When I launch Excel (or any other office app) I get an error message saying that the MS Office Database can't be used. Also interesting is that it builds the font cache every time. If I'm not mistaken the font cache and Office database are also stored in profiles, but not under ~/Library
    Short story long, after a Time Machine restore some apps can't seem to write profile information, but the file permissions look correct and Disk Utility can't find any problems with my new disk.
    Any help or pointers would be great.
    Here are the details on the new hard drive:
    Capacity: 1 TB (1,000,204,886,016 bytes)
    Model: WDC WD10TPVT-00HT5T1
    Revision: 01.01A01
    Native Command Queuing: Yes
    Queue Depth: 32
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Rotational Rate: 5200
    Medium Type: Rotational
    Partition Map Type: GPT (GUID Partition Table)
    S.M.A.R.T. status: Verified
    Volumes:
    Capacity: 209.7 MB (209,715,200 bytes)
    Writable: Yes
    BSD Name: disk0s1
    Macintosh HD:
    Capacity: 999.86 GB (999,860,912,128 bytes)
    Available: 668.89 GB (668,892,172,288 bytes)
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk0s2
    Mount Point: /

    You might try the following to repair permissions in your Home folder. Disk Utility does not repair permissions in the Home folder.
    To fix Home folder permissions
    Open the Terminal application in the Utilities folder. At the command line prompt enter or paste the following command line:
    sudo chown -R `id -un`:`id -gn` ~
    Press RETURN. You will be prompted to enter your admin password which will not be echoed.

  • Restoring files from Time Machine after installing Maverick

    I have an older MacBook Pro and while installing Maverick my aged hard drive gave out. I got a new hard drive installed by an authorized Mac dealer and now I'm trying to restore files from Time Machine. I haven't done anything at all yet with Maverick. I followed the Migration Assistant directions and have the backup connected to my laptop. The backup icon appeared on my desktop. I hit continue and followed directions and reached the point where it said "looking for source" and there is a spinning ball. That was an hour ago. Is it just taking a long time to sort through the large volume of material in my Time Machine backup, or is something wrong? What should I be doing, if anything? Thank you for your help.

    I have an older MacBook Pro and while installing Maverick my aged hard drive gave out. I got a new hard drive installed by an authorized Mac dealer and now I'm trying to restore files from Time Machine. I haven't done anything at all yet with Maverick. I followed the Migration Assistant directions and have the backup connected to my laptop. The backup icon appeared on my desktop. I hit continue and followed directions and reached the point where it said "looking for source" and there is a spinning ball. That was an hour ago. Is it just taking a long time to sort through the large volume of material in my Time Machine backup, or is something wrong? What should I be doing, if anything? Thank you for your help.

  • I can't restore 'library' with support files from Time Machine

    backup - I can't restore 'library' with support files from Time Machine - Ask Different
    Due to an accident, my entire applications folder with all the support files, including plists and caches got deleted.
    I tried restoring by files from the most recent Time Machine backups but I cannot retrieve my applications with the support files.
    I even tried it with migration assistant on a new image.
    Is this impossible?
    Must I start from scratch?
    Details of the ‘accident’
    I was using this app called ‘AppCleaner’ that also automatically deletes related support files which are normally left behind if one simply trashes an Application.
    In the search view, I typed the app name and I selected all the apps in the results using Command + A. Unfortunately, this selected every single Application in the Applications Folder in the background and I trashed and deleted all files.
    Anyway.
    I tried to restore the applications and library from my Time Machine Back-ups but failed to do so because I didn’t have enough space to restore. (I have a 11inch Macbook Air 2012 64GB SSD
    When I tried to restart in recovery mode, I had the same problem, I was disallowed the option to restore using my time capsule backups because my SSD didn’t have enough space for the backup.
    I then tried to restore it to a totally different but new image on a 64GB USB3.0 Sandisk USB Stick, but the process stopped after hours of being stuck around 30.4 percent and the computer was unable to boot, leaving me with a persistent verbose message suggesting it couldn’t identify the os, kernel or anything.
    I finally tried restoring the state using migration assistant on the very same SSD that had my files missing. This happened successfully and I have all my applications in the applications folder.
    But now I have 13GB free (I had 2GB before) and all my application support files, saved states, preferences, caches and customizations are gone.
    Basically, it feels like I just got a new macbook with my documents and itunes folder loaded on to it.
    How can I get my apps back to the pre-deletion state or is this impossible? Do I have to start from scratch? I thought my Time Machine Backups would restore it to exactly the same state, am I wrong?
    Screenshots:
    Message was edited by: Arsenenger

    Can you simply navigate to your Time Machine backup with the Finder? Treat it like an external hardrive and just look for your old Applications folder. /Applications/
    Also, quite a few apps put config and support files in ~/Library/Application\ Support/
    So you may be able to get the files from there as well.

  • Why can't I restore a file from Time Machine?

    I purchased a new Macbook Pro a month ago. I migrated all my stuff from my previous Macbook that was running Maverick. All went well. However, I was looking for a particular file. Apparently I had removed it from my old Mac at some point, but I found it in Time Machine. My backups are on an external hard drive. Again, I can see the file in Time Machine, but I can't seem to do anything with it.
    To that end, I see two files: one has shows the file size, and the other (same name, file type, etc...) says "Calculating size"...forever.
    Thoughts? Suggestions?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try the restore operation again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

  • How do I restore files from time machine backups made before reformatting macbook air?

    How do I restore files from time machine backups made before reformatting macbook air?

    The section titled "Restoring data from Time Machine backups" in the following may help: http://support.apple.com/kb/HT1427

  • HT201250 Can I restore photo files from Time Machine without the use of an external drive?  I'm trying to restore lost photo files and I see them listed in Time Machine (without use of an external drive), but when I try to restore I get a error code 36.

    Can I restore photo files from Time Machine without the use of an external drive?  While I was transferring photos back and forth from a thumb drive something went haywire and my IPhoto was wiped clean!  When I click on Time Machine I see all the dated pages (without an external storage drive connected), go back to a date where all my photo files are there, click "restore", and I get the message:  "The Finder can't complete the operation because some data in file cant be read or written (error code - 36)"

    Thanks so much Terence.  I tried some of the fixes from that page, but then discovered the suggestion to compress the Time Machine Back up of the original library and transfer it as a zip back to my computer as detailed here:
    http://pondini.org/TM/E9.html
    That worked like a charm.  I really appreciate it. 

Maybe you are looking for

  • Passing text information from sales order to purchase requisition

    Hi My requirement is in third party processing. I want to pass line time text in sales order to the purchase requisition created in a third party processing. My question : is it possible in standard config setting? If not, Is there any user exit to a

  • How can you complete a form?

    I converted a PDF document to Word Document.  Our vendor sent a request form for Information needed from our company.  I could not complete the form to submit the information. I will have to print the form and fill out by hand.  Why can't I just type

  • Wcs not starting up after upgrade

    I recently upgraded the cisco wcs software from 5.0.56.2 to 5.2.148 in order to eventually upgrade it to the latest version 7.0, after installing the software it fails to start WCS, i rebooted the server already and restarted the services i ran dbadm

  • Buffer Tuning in ST02 Recommendations

    I am looking for some advice as to how to change tune my buffers in our application servers.  Their current settings are based off of SAP’s, pre go-live checks.  But to me they seem to need some adjusting. Our server has 8GB’s of RAM, so I feel like

  • Calling Multi Template From Apex

    I have a report in BI which has 2 templates (one for English, one for German). I would like to call this report from 2 different buttons in Apex, one button for each template. Any ideas please Gus