Missing files in BusinessObjects Enterprise 11.5/Web Content/bin folder?

I am getting the following error when I try to start BusinessObjects Enterprise .NET Administration Launchpad.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: File or assembly name uitoolkitweb, or one of its dependencies, was not found.
Source Error:
Line 193:               
Line 194:               <add verb="GET" path="EnterpriseImageHandler.aspx" type="CrystalDecisions.Enterprise.WebControls.EnterpriseImageHandler, CrystalDecisions.Enterprise.Web, Version=11.5.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
Line 195:               <add verb="" path=".bouitoolkit" type="com.businessobjects.encyclopedia.uitoolkit.web.ToolkitHttpHandler, uitoolkitweb"/>
Line 196:          </httpHandlers>
Line 197:          
It seems it can't find a file or set of files in ///C:/Program Files/Business Objects/BusinessObjects Enterprise 11.5/Web Content/bin. I looked in this folder and the only file there is WCA_Enterprise.dll.
This all was working last week and I haven't run any updates so I'm not sure what happened to the files if, in fact, there were any to begin with.
Is there a simple way to get these files back?
Thanks,
Art

Hello Art,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Similar Messages

Missing files in Web Content/bin folder

I am getting the following error when I try to start BusinessObjects Enterprise .NET Administration Launchpad.
+Configuration Error+
+Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.+
+Parser Error Message: File or assembly name uitoolkitweb, or one of its dependencies, was not found.+
+Source Error:+
+Line 193:               +
+Line 194:               <add verb="GET" path="EnterpriseImageHandler.aspx" type="CrystalDecisions.Enterprise.WebControls.EnterpriseImageHandler, CrystalDecisions.Enterprise.Web, Version=11.5.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />+
+Line 195:               <add verb="*" path="*.bouitoolkit" type="com.businessobjects.encyclopedia.uitoolkit.web.ToolkitHttpHandler, uitoolkitweb"/>+
+Line 196:          </httpHandlers>+
+Line 197:          +
It seems it can't find a file or set of files in ///C:/Program Files/Business Objects/BusinessObjects Enterprise 11.5/Web Content/bin. I looked in this folder and the only file there is WCA_Enterprise.dll.
This all was working last week and I haven't run any updates so I'm not sure what happened to the files if, in fact, there were any to begin with.
Is there a simple way to get these files back?
Thanks,
Art

Hello Art,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

User account missing files and preferences?? Not from renaming home folder

Hi all,
After some strange behaviour in Apple Color, upon rebooting, my user account has returned to default. I had many items on the desktop and various subfolders in the documents folder. All pictures. Music. All are now gone. Desktop and dock have been reset to default.
The user folder still exists but everything I had in there is gone.
Another user may have been created called "root" containing only
/Library
/Documents/Color Documents...etc
I am aware of the problem with changing the short name or renaming the home folder (after sifting through this forum) and it is definitely not this problem.
Maybe its somehow related but I definitely did not rename any of these things myself. And there is no duplicated user account with all my files in it.
Any help or ideas would be greatly appreciated.
Cheers
Nate
ps. Is it possible to restore the system to an earlier time like in Windows?
I've read somewhere that a Previous System folder exists and it might be possible with Disk Utility but I can't find this folder anywhere.
Message was edited by: stoney23

Hi there,
Thanks for the reply. I've managed to restore most of my important stuff using a file recovery software so I'm at peace with the loss of only a few files now. I'll just have to start rebuilding my dock and preferences again now which is not the end of the world.
After a bit of thinking about it I'm 95% sure this is what happened.
Color tried to save an image file with the same name as the folder I had made storing all my Color project saves. The folder was called Post. I'm not quite sure how its possible but it managed to overwrite the folder with the new image file. Now there is a Color image file (with no extension) there called Post and no folder.
Then I tried to save the Color project and of course it told me the project directory was missing and it will create a new one. I'm guessing this is when Color bulldozed through my user account to create the folder Color Documents where it DIDN'T save the file anyway
Leaving me with a default user account deleting everything that was 'added' to the account previously.
It also created another user account called 'root' in which there is also only a Color Library/preferences and documents folder
Is that normal that things like that can just happen?
I guess from here I will just try and finish my project and afterwards do a re-install of the OS just to be sure - checking the Archive and Install option this time
Unless you have any other ideas from what I've told you.
Thanks again for replying
Nate

MISSING Template Selection - BusinessObjects Enterprise Integration Kit

Hello,
I have the "com.businessobjects.pct.masteriview.par" imported. According to the description should now when you create a new iView in the selection of templates "BusinessObjects Integration Kit iView template" is available. This does not work! I did not see this option available.
Can someone help me? I went in front after this documentation (C5)
http://wiki.sdn.sap.com/wiki/display/BOBJ/CreateBOEXI3.1IntegrationKitIViewTemplateintoSAPEP+Portal
Regards
J.V.
Edited by: Jana VOGL on Nov 9, 2010 1:23 PM

Hi,
the portal runs on a server. What is wrong? I have done everything exactly as documented.
Regards
J.V.
Edited by: Jana VOGL on Nov 11, 2010 8:13 AM

How to get the actual path of a file present in the Web content folder

I have a jasper file which is present inside the Web-Content folder of my project.
I need to pass this file as an argument to the FileInputStream object. How can i give the actual path of the jasper file, since this project can be deployed anywhere else also.

You may be able to use the getRealPath or getResource methods in ServletContext

Photoshop elements 11and finding missing files

I had a problem with an account on my photoshop so had to open a new account on my imac. I had spent quite a bit of time editing my Alaska pictures and somehow now they wont let me move them to my new downloaded photoshop. it says they are missing files and if I try to find them it will search forever and not find them.. is there another way to get them to my other photoshop or even if i could put them on my external hard drive. that is where the problem started in my old account is when I bought that. I kept getting the beach ball spinning and couldnt get it to stop so apple just suggested I open a new account.

I am sorry: There was a word misprint that could be confusing. Please ignore my previous post. Here is the corrected version:
The Missing Files thing is very difficult. I found a pretty easy way around it.
My newest photos are in a folder (windows folder) called 2013. I have other folders, such as 1990s, 2000-5, etc. The trick is to make a new empty folder called Temp, in the same location as your other folders. For me, this temp folder, and those other folders, are located within a folder called Adobe, which is within another folder called "my pictures". I import all new photos into this temp folder. Then I add them to the catalog by selecting File, and choosing search and finding the temp folder. Then I choose "get media" which seals the deal.
When you choose Get Media, the organizer only displays the new photos you've just added to the catolog. Once you see these new photos, immediately add them to any albums within photoshop. The next thing I do is move the photos to a folder where you really want them, say 2013 for example. This gets them out of the temp folder. YOU HAVE TO DO THIS WITHIN PHOTOSHOP ITSELF--IF YOU MOVE PICTURES THE TRADITIONAL WAY FROM FOLDER TO FOLDER, THIS CONFUSES THE ORGANIZER. On a windows version of photoshop, I highlight these photos within photoshop and choose file/move on the organizer menu and select the folder. This moves all of the photos from the temp folder into the folder that you really want them to go into. You're done.
I've done this hundreds of times with no missing files problem until yesterday! A glitch happened, whereby I chose to delete the photos and selected the option to also delete them from the temp folder. When I tried to back up elements, it warned me that there were missing files. Since they were originally in the temp folder, I knew where to look. The beauty of the temp folder is that if you ever get the "missing files" notification, it will be easy to find them. If you hadn't used a temp folder and instead had thrown the pics in a folder with a thousand other shots, it would be really tough to find them.
Since I knew the temp folder was involved in all this, here's how I found the "missing files": I used the "my folders" area of photoshop, which is directly under the albums and has a yellow icon. I clicked onto the arrow to the left of this folder, found the temp folder, and all of the missing pictures were suddenly seen in my organizer. However, I knew that the temp folder on my computer was empty. This was confusing to me. Why would the organizer think these photos were in the temp folder, when they were actually in my recycle bin? I clicked on all of the photos that were supposedly in the temp folder, even though I knew they weren't there. Clicking highlighted the photos in blue. Then I right clicked and chose "delete from catalog". Problem solved. No more missing files.
All of this stuff took me 8 hours to figure out on my own. I hope I save you some time.

How to find out web content files linked in folio through scripting

Hi all,
Please suggest me, how to find out web content files linked in folio through scripting.
Regards,
Moorthy

@Moorthy – can you tell us a bit more? By mentioning "folio", I think you are referring to Adobe Digitial Publishing Suite (ADPS or short: DPS). If yes:
1. Do you want to analyze Folio files *.folio and get the linked web content files?
2. Or do you want to check an InDesign file with an overlay and check what files are linked as web content?
3. Or something else?
Where is your base problem?
Packaging the InDesign files and copy/relinking the web content files after the packaging process?
Uwe

No Web Content node found in HelloClint project.

Please check:
In tutorial document "Building Web Services"
Step 7. of section "Developing a Client for a Service using Proxy Generation" says:
If you wish to inspect the WSDL, expand the :Hello | Web Content | hello nodes and double click on the HelloService.wsdl file.
Actually, there is no Web Content node under the root node Hello.
Node Hello only has one sub node Application Sources.
Please check: is it an error or not?
If not, please let use know how to create Web Content node in this project.
Also please explain why the picture in step 3 of the following section "Create and test the Client" the "Web Content" node disappearing? (for the same project Hello).

Thanks for your advice, but it still doesn't work. I have created a new project for my tests with only the web object in it to make sure no other objects etc. are influencing the output. I published the project and tried to run it on different browsers/operating systems and directly from my hard drive vs. Adobe Connect. The results:
Using my Mac and opening the project with the HTM.-file from my hard drive after I have added the published files folder to the trusted locations for Flash (without this setting, it doesn't work), the web object only appears in Safari, but not in Chrome and Firefox. Using AdobeConnect, it's the same: only Safari.
Using a Windows laptop (again opening the project with the HTM.-file from my hard drive after I have added the published files folder to the trusted locations for Flash), it works with Internet Explorer and Firefox, but not with Chrome. Using AdobeConnect, no browser works. I only get this message:
I can't use the web object when it only loads under very special circumstances. Moreover, I found out, that checking the "Scale HTML content" checkbox in the publish window results in a totally misplaced web widget in those browsers that support the web object. It then looks like this:
I use this option regularly, so this is really a problem for me.
I hope you can tell, what I can do to get the web object running. I simply can't believe that this is the standard behaviour and that everybody else is experiencing the same problems. There must be something I can do to get it running.
I hope you can help.
Best Regards
Andreas

Missing BusinessObjects.Enterprise.Providers assembly

Post Author: pkellogg
CA Forum: .NET
We are going through the tutorials and looking at the examples using the BusinessObjects.Enterprise.Providers assembly. The tutorial shows using this assembly for creating the BOEMembershipProvider in the web.config. The problem is the BusinessObjects.Enterprise.Providers cannot be found anywhere. Is there an update to the tutorial examples? The code in the example is: <membership defaultProvider="myBOEMembershipProvider1"> <providers> <add name="myBOEMembershipProvider1" type="BusinessObjects.Enterprise.Providers.BOEMembershipProvider" applicationName="MyApplication1" connectionStringName="CMS1" enableCookies="true" authentication="secEnterprise"/> </providers>
</membership>
the assemblies section shows using the missing assembly:
<add assembly="BusinessObjects.Enterprise.Providers, Version=11.5.3300.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>

Post Author: MJ@BOBJ
CA Forum: .NET
You can download the BOE .NET Providers from the following link:
http://www.businessobjects.com/products/downloadcenter/boeproxi.asp
-MJ

Could not load file or assembly 'BusinessObjects.Enterprise.Sdk' with 64 bit SDK

I am running across an error that I do not fully understand when trying to get the SDK to work for 4.1 SP04. I have been trying to get this solution for a while now. I am able to run the SDK functionality with the 32 bit version without an issues however, my client would like to run the 64 bit version to align with their architecture. I have added the x64 DLLs to my project in VS2013, and compiled and built the project as a 64 bit project. I am receiving the following error message:
Could not load file or assembly 'BusinessObjects.Enterprise.Sdk' or one of its dependencies. An attempt was made to load a program with an incorrect format.
When building the project to build on "Any CPU" instead of x64 or x86, I am seeing the following messages:
Warning    1    There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "BusinessObjects.Enterprise.Sdk, Version=14.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304, processorArchitecture=AMD64", "AMD64". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take a dependency on references with a processor architecture that matches the targeted processor architecture of your project.    DemoWeb2
Warning    2    There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "CrystalDecisions.Enterprise.Framework, Version=14.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304, processorArchitecture=x86", "AMD64". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take a dependency on references with a processor architecture that matches the targeted processor architecture of your project.    DemoWeb2
Warning    3    There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "CrystalDecisions.Enterprise.InfoStore, Version=14.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304, processorArchitecture=x86", "AMD64". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take a dependency on references with a processor architecture that matches the targeted processor architecture of your project.    DemoWeb2
Warning    4    There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "CrystalDecisions.Enterprise.PluginManager, Version=14.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304, processorArchitecture=x86", "AMD64". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take a dependency on references with a processor architecture that matches the targeted processor architecture of your project.    DemoWeb2
I have made sure that I am referencing the 64 bit sdk .dlls from C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\. I only have 64 bit installed as well. Are InfoStore, Framework, and PluginManager only x86?
Thanks!

Hi Dustin
You do not need to be concerned if your app references 32 or 64 bit assemblies. VS being 32 bit, needs to reference 32 bit assemblies in order to compile correctly. Thus running the app from the VS IDE, you wil be using 32 bit assemblies. Using a compiled exe or a DLL, the app will use 32 bit or 64 bit assemblies depending on how the app was compiled and "bitness" of the OS.
E.g;; an app compiled as 32 bit will require 32 bit assemblies
An app compiled as 64 bit will run 64 bit assemblies - on 64 bit OS only.
An app compiled as "Any CPU", will run 32 b it or 64 bit assemblies, depending on the OS. On a 64 bit OS, the app will by definition use 64 bit assemblies (but it is up to you to deploy the 64 bit runtime - not the 32 bit runtime). On a 32 bit OS the app will use 32 bit assemblies.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Error: There was a problem logging on to SAP BusinessObjects Enterprise

I am trying to use Crystal Reports Enterprise XI 4.0 with BusinessObjects Enterprise 4.0 using a Bex Query on an SAP NetWeaver 7.01 SPS 9 BW system. I have been using the SAP Press book u201CIntegrating SAP BusinessObjects BI Platform 4.x with SAP NetWeaveru201D as my guide, attempting to follow it step by step. Please bear with me as I have only started working with this set of products within the last month. (Very new at this and do not have a very good grounding of the way it all works together. Trying to learn as quickly as possible as I am expected to support this set of tools for our developers / users.)
I have been trying to follow along with the book to get everything connected. At this point, I have BOE set up to attach to the SAP NetWeaver BW system. I have created a test Bex Query on the BW system. From within BOE, using CMC, I can configure the Bex Query as an OLAP connection. I have set it up for SSO. I have also exchanged certificates between the BOE and the SAP NetWeaver systems which I believe will allow the exchange of tokens.
I then go into Crystal Reports for Enterprise XI 4.0 on my PC. (I am running Windows 7 64-bit on the PC. I installed the BOE 4.0 suite of client tools except for SAP BO Live Office and SAP BO Analysis for MS Office). I can attach to my BOE system and can browse to see the OLAP connections in the BOE. I then try to select one as the data source for a new report. I then get a pop-up window stating:
   Unable to Logon
     There was a problem logging on to SAP BusinessObjects Enterprise.
       Please check your logon credentials and make sure your network is properly configured before trying again. If the problem
       persists please contact your Administrator.
I cannot find a log / trace / error file on my PC, the BOE system or the BW system to indicate any additional information as to what the root problem is. Has anyone seen a similar error and might know where I can find more information, how to increase trace levels so that I get some additional information or provide hints as to what the root problem might be?
I am also trying to figure out how the authentication works between the PC, BOE and SAP NetWeaver. If using a token, there has to be consistency with the username (or some value) and I am not certain that is happening. Right now, my BOE sources its UME from the SAP NetWeaver BW system. So its user accounts are in the form SID123/ACCOUNT where SID is the SID of the SAP NetWeaver system and the string u201C123u201D is the client on that SID. When I log into the BOE system from within Crystal Reports, I am using the account in that format whereas the account on the SAP NetWeaver BW system in actuality is only the string ACCOUNT. So is the token stripping the string u201CSID123/u201D from the account name when it is sent so that the accounts match? Or do I have to manually configure some kind of account alias (in the BOE system?) so that the two recognize each other? Or something else?
Any hints or ideas around where I can find additional information or where I have gone wrong, would be greatly appreciated.
Thank-you in advance,
Deb Nugent.

Henry,
Many thanks and excellent suggestions. But I am still not able to get this to work and (once again) am stuck.
RE: Server Connections: When I check my server connection, I have not ticked SSL and am using the non-secure server port for my BOE system. When I click on u201CTest connectionu201D, I can successfully log in using my username / password on the SAP NetWeaver BW system. If I tick the SSL box without changing the port, I get the error message u201CFailed to establish a connection. The cause was u201CCannot connect to SAP BusinessObjects Enterprise at this time. Please try again later.u201D If I tick the SSL box and change the port to use the secure server port for the BOE system, I get the same error.
RE: Preferences: I am using the default settings under Preferences -> Network Settings. We do not manually configure proxy settings on our network so I have ticked u201CUse system proxy configurationu201D and under SSL settings, have ticked u201CUse system keystore / trust storeu201D. I have swapped keys between the BOE system and the SAP NetWeaver system but I have not swapped any keys between my PC and the BOE system or the SAP NetWeaver system (which I do not expect to do but am mentioning here in case I am wrong).
RE: BILaunchPad: I do not have any references for BILaunchPad. Is this u201CWeb Intelligence Rich Clientu201D? If so, I tried starting it, it reported an error: u201CAn error occurred at session creation.u201D Details showed u201CSSL mode is being requested but the following argument(s) are not present: passphrase (FWM 01012)u201D I went into the CMC and checked my SAP connections under Authentications. On the tab u201COptionsu201D, there is the section u201CSAP SSO Serviceu201D where I typed in the KeyStore password. When I created the key store file, I only specified a keystore password and did not specify a private key. Originally, I had it set with the private key blank with the correct password on the keystore. I also tried entering the same password as the private keystore and saving it. I verified that the connection services for Web Intelligence had restarted but I still am getting that same message when I try to start the Web Intelligence Rich Client.
At OS level on the BOE server, I logged in as my boe1 account and checked the parameters that can be entered for the PKCS12Tool.jar file that I used to create the ketstore file I had used. There does not appear to be an option for anything other than the keystore password. There is no private key password field listed.
I searched for the FWM 01012 error and found the HTML and PDF help files form SAP explaining errors. However, it only states u201CEnsure that all SSL arguments are presentu201D but gives no details as to what, exactly needs to be checked.
I will be talking with co-workers today to see if any of them can make sense of this (anoterh set of eyes sometimes helps). Any other suggestions about areas to look for addiitonal details / increased traces / logs?
Deb Nugent.

Where to get the BusinessObjects Enterprise SDK - Java Libraries

Hi All,
I have installed the Crystal Report Server XI R2 but where to get the java sdk that I will use in my client j2ee web application?
These are the folders in my CR Server directory.
/BusinessObjects Enterprise 11.5
/Business Objects/common/3.5/java/lib
It seems that I will get the jar from this folder but what are those jars?
/Business Objects/common/3.5/java/lib
What are the list of jars that my client web application used?
Basically in doing my POC work I need these library imports
<%@ page import="com.crystaldecisions.sdk.exception.*"%>
<%@ page import="com.crystaldecisions.sdk.framework.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.infostore.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.managedreports.*"%>
Thanks in advance.
Regards,
Rulix
Edited by: Rulix Batistil on Nov 4, 2008 11:38 AM

Hi Rulix
From the packages that you have included ,it seems that you are using managed RAS SDK for the functionality that you want to implement.
Here is a listing of the JAR files that you would require in your RAS application. Please note that you would require the enterprise jars and the Crystal connection jars.
- boconfig.jar
- cecore.jar
- celib.jar
- ceplugins.jar
- cereports.jar
- certj.jar
- cesession.jar
- ceutils.jar
- cexsd.jar
- Concurrent.jar
- corbaidl.jar
- CRDBJavabeansServer.jar
- CRDBJavaServer.jar
- CRDBJavaServerCommon.jar
- CRDBJDBCServer.jar
- CRDBXMLExternal.jar
- CRDBXMLServer.jar
- crlov.jar
- crlovexternal.jar
- crlovmanifest.jar
- ebus405.jar
- freessl201.jar
- icu4j.jar
- jaxrpc.jar
- jrcadapter.jar
- jrcerom.jar
- jsafe.jar
- jtools.jar
- log4j.jar
- MetafileRenderer.jar
- pullparser.jar
- rasapp.jar
- rascore.jar
- rpoifs.jar
- saaj.jar
- Serialization.jar
- sslj.jar
- u211java.jar
- URIUtil.jar
- webreporting.jar
- xbean.jar
- xercesImpl.jar
- xml-apis.jar
Hope this helps you.
Thanks
Soni

Could not load type 'BusinessObjects.Enterprise.Provider.BOEMembershipProvi

I am using ASP.Net (.NET Framework 3.5) and VS 2010 and BOE XI 3.1 Server. I am trying to write a .NET WEB App and use BOE Membershipprovider class and keep getting this message. I have followed the steps mentioned in SAP BOE SDK Document and added provider info in WEB Config File and as soon as I hit Login Control's Submit button, It is throwing this message. Any help is greatly appreciated

Hello Srikanth,
From your post, I'm assuming:
1. You're developing a BusinessObjects Enterprise .NET SDK application.
2. You're not using the standalone Crystal Reports engine, specifically the Crystal Reports for Visual Studio 2010 engine.
3. You've installed the XI 3.1 BusinessObjects Enterprise .NET SDK MSI runtime installation package.
4. You've found that the runtime does not contain the BusinessObjects Enterprise Provider libraries.
That's expected, since the Provider is only installed with the BusinessObjects Enterprise installation media, and not with the MSI.
But I'll also ask you if the Provider is what you really need. The provider libraries just provides a data source into the BusinessObjects Enterprise file/folder structure - there is no UI component associated with them. In fact, the .NET InfoView doesn't use them.
My recommendation would be to use the BusinessObjects Enterprise .NET SDK directly, and develop the UI yourself, since the UI components are not available with the SDKs provided with the product.
Sincerely,
Ted Ueda

Where is BusinessObjects Enterprise Java SDK jars located(BO XI3.1)?

We need to import Business Objects Enterprise Java SDK's jar files. However, there is no document or forum post that have the directory for version BOXI3.1.
By searching for the cecore.jar file, we find a directory that contains many Business Objects Enterprise Java SDK jar files:
D:\Business Objects\BusinessObjects Enterprise 12.0\warfiles\WebApps\BusinessProcessBI\WEB-INF\lib
Is this the correct directory for the Business Object Enterprise jar files?
We imported bellow SDK jar files:
asn1.jar
cecore.jar
celib.jar
ceplugins_client.jar
ceplugins_core.jar
ceplugins_cr.jar
cereports.jar
certj.jar
cesession.jar
ceutils.jar
clientplugins.jar
commons-codec-1.3.jar
commons-logging-1.1.jar
corbaidl.jar
ebus405.jar
flash.jar
freessl201.jar
jsafe.jar
logging.jar
pluginhelper.jar
postprocessing_oca2service.jar
publishing_oca2service.jar
rasapp.jar
rascore.jar
reporttemplate.jar
serialization.jar
SL_plugins.jar
webreporting.jar
xbean.jar
xcelsius.jar
XcelsiusSLPlugins.jar
Is this the complete list that we should import for X3.1? there are some files like commons-codec-1.3.jar, it looks a Apache jar file, not the SDK's jar file. shall i include such files as well?

Don't know why I see this error when I am creating the SessionMgr object even though I have the CrystalDecisions.Enterprise.Framework and CrystalDecisions.Enterprise.InfoStore referenced:
SessionMgr sessionMgr = new SessionMgr();
Retrieving the COM class factory for component with CLSID {E063B04A-CB8B-460E-99D0-F7D8FA2FAAA2} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)).

Add an SAP entitlement system to BusinessObjects Enterprise

Hello Experts,
On my logon Cmc screen logon I see in the weblist, all authentication method:
-Entreprise
-Windows AD
-LDAP
-SAP
I'm connect to the Cmc with the account Administrator with the authentication "Entreprise". Go to "Authentication" on management area of the CMC and I don't see the SAP link. I see only this:
-Entreprise
-LDAP
-Windows AD
-Windows NT
I use the ddl files and jco from the zip file named "sapjco-ntintel-2.1.9.zip" downloaded from http://service.sap.com/connectors.
I placed the librfc32.dll and sapjcorfc.dll into those directory:
-C:\Windows\System32
-D:\BOXI31_WS61\Business Objects\BusinessObjects Enterprise 12.0\win32_x86
And the sapjcorfc.jar into:
D:\BOXI31_WS61\WebSphere\AppServer\lib, and create variable environement CLASSPATH.
Why I can't see the SAP link ?
Thx in advance.
Best Regards.

Hello Ingo,
I use Websphere 6.1. After the installation of the SAP IK (sucessfully installed) I used wdeploy. For more details I did it:
To deploy web applications on IBM WebSphere:
To deploy BusinessObjects Integration for SAP Solutions web applications after installation, you must use the wdeploy found in the installdir\deployment folder instead of the standalone wdeploy.
1. Ensure that you have deployed the SAP Java Connector as described in
SAP Java Connector on page 53.
2. Ensure that your CLASSPATH environment variable includes the sapj
co.jar archive file.
See SAP Java Connector on page 53 for details.
3. Manually deploy the BusinessObjects XI Integration Solutions for SAP
web applications using wdeploy found under INSTALLDIR\deployment.
a. Move to businessobjects_root\BusinessObjects12.0\java\applications\, and use the following command to package the WAR files:
"businessobjects_root\javasdk\bin\jar.exe" cf CmcApp.war -C
"businessobjects_root\BusinessObjects Enterprise
12.0\warfiles\WebApps\CmcApp" .
"businessobjects_root\javasdk\bin\jar.exe" cf SAP.war -C
"businessobjects_root\BusinessObjects Enterprise
12.0\warfiles\WebApps\SAP" .
"businessobjects_root\javasdk\bin\jar.exe" cf InfoViewApp.war -C
"businessobjects_root\BusinessObjects Enterprise
12.0\warfiles\WebApps\InfoViewApp" .
66 BusinessObjects XI Integration for SAP Solutions Installation and Administration Guide
4 Installing BusinessObjects XI Integration for SAP Solutions Installing on Windows
"businessobjects_root\javasdk\bin\jar.exe" cf OpenDocument.war -C
"businessobjects_root\BusinessObjects Enterprise
12.0\warfiles\WebApps\OpenDocument" .
"businessobjects_root\javasdk\bin\jar.exe" cf dswsbobje.war -C
"businessobjects_root\BusinessObjects Enterprise
12.0\warfiles\WebApps\dswsbobje" .
"businessobjects_root\javasdk\bin\jar.exe" cf
PartnerPlatformService.war -C "businessobjects_root\ BusinessObjects
Enterprise 12.0\warfiles\WebApps\PartnerPlatformService" .
b. Open the config.WAS_Type file (for example, config.webSphere6) located under installdir\deployment, set the parameters
appropriate for your environment, and save the file.
For more information about config file parameters, see the u201CDeploying applications after installationu201D chapter of the Web Applications Deployment Guide.
c. Navigate to the installdir\deployment folder, and use the following command to redeploy related BusinessObjects Enterprise web applications.
wdeploy.bat webSphere6 -DAPP=CmcApp -Das_admin_pass
word=<your password here> undeploy
wdeploy.bat webSphere6 -DAPP=CmcApp -Das_admin_pass
word=<your password here> deploy
wdeploy.bat webSphere6 -DAPP=InfoViewApp -Das_admin_pass
word=<your password here> undeploy
wdeploy.bat webSphere6 -DAPP=InfoViewApp -Das_admin_pass
word=<your password here> deploy
wdeploy.bat webSphere6 -DAPP=OpenDocument -Das_admin_pass
word=<your password here> undeploy
wdeploy.bat webSphere6 -DAPP=OpenDocument -Das_admin_pass
word=<your password here> deploy
wdeploy.bat webSphere6 -DAPP=dswsbobje -Das_admin_pass
word=<your password here> undeploy
wdeploy.bat webSphere6 -DAPP=dswsbobje -Das_admin_pass
word=<your password here> deploy
d. Use the following command to deploy SAP web applications.
wdeploy.bat webSphere6 -DAPP=SAP -Das_admin_password=<your
password here> deploy
wdeploy.bat webSphere6 -DAPP=PartnerPlatformService -
Das_admin_password=<your password here> deploy
Edited by: FeleRHunt3R on Apr 20, 2010 10:20 AM

Missing files in BusinessObjects Enterprise 11.5/Web Content/bin folder?

Similar Messages

Maybe you are looking for