Missing flex folder in the FDS

Hi,
In the FDS2 installation am unable to find the flex folder. I
am reinstalling the fds2. In the first installation flex folder was
there but not in the second installation.
Thanks
Sun

hi
I installed Flex Data Service . When i look into the
directory structure FDS, Flex directory is missing. with out flex
directory its hard to create j2ee applications using flex..
Sun

Similar Messages

Invalid root. The WEB-INF/flex folder must contain either flex-config.xml or services-config.xml.

Hi,
I am tryng to create a Flex Project, but got stuck with an error....
The Error is Invalid root. The WEB-INF/flex folder must contain either flex-config.xml or services-config.xml.
Initially I download jboss-5.1.0.GA and placed it in C folder.
While creating project, I selected J2EE server, selected remote object access service and LiveCycle Data Services...
In the next step, I de-selected the use default location for local LiveCycle Data Services server.
In the root folder - C:\jboss-5.1.0.GA
for Root URL: http://localhost:8700/flex/
Context Root: /flex
when I clicl Validate Configuration.. this is the error I get Invalid root. The WEB-INF/flex folder must contain either flex-config.xml or services-config.xml.
I can't understand what is going wrong here....any ideas....
Thanks for the Help.....
Thanks

Run the wizard, select ColdFusion as the server technology, but don't
check the option to use remote object access service. Then, open the
project properties dialog, go to the Flex Compiler page, and add a the
compiler flag: -services
"C:\ColdFusion8\wwwroot\WEB-INF\flex\services-config.xml" (obviously
changing the path as appropriate). This flag is what gets set by the
wizard when you opt to use Flash Remoting. -http://www.feed-squirrel.com/index.cfm?evt=viewItem&ID=77732
Above is a work-around/solution that was successful for me. Below are screen shots of how I initially configured the project, following the above solution.
In the image above, notice how I didn't tick the "Use remote object access service" checkbox.
For the image below, the 'Y:\' value is a mapped network directory to my server (IIS) webroot, which is "\\windowsserver/Inetpub/wwwroot/". Root URL is the name of my server. Fill in the fields with correct values and hit finish.
Then navigate ( Project>Properties>Flex Compiler ) to this project's 'Flex Compiler context menu.
And 'W:\' is another mapped network directory that points obviously to my Coldfusion's WEB-INF\flex.
I hope that this helps. As you may see, I'm hoping that this will help you and others that are likely to come across problem.

Anyone know why i cant upgrade to newer version of itunes , its coming with an error "ITUNES64.MSI FOLDER containing the installation package is missing ??

anyone know why i cant upgrade to newer version of itunes , its coming with an error "ITUNES64.MSI FOLDER containing the installation package is missing ??Ive tried unistalling previous version but same message comes up

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

While transferring ipod to laptop/itunes library, i accidentally lost the :F00" folder..so when i transfered folders 1-13, i didnt get the songs in the missing F00 folder...can i retrieve it??..

while transferring ipod to laptop/itunes library, i accidentally lost the F00 file(says folder empty) F01-F13 are there so when transfer is done im missing all songs in the F00 folder...can i get them back>??

Download previous purchases from the iTunes Store - Support - Apple

How exactly does flex decide if the dataprovider in a lineseries has missing data.

How exactly does flex decide if the dataprovider in a
lineseries has missing data? It seems like a fairly abitary
concept.

"nikos101" <[email protected]> wrote in
message
news:gidae1$k00$[email protected]..
> How exactly does flex decide if the dataprovider in a
lineseries has
> missing data? It seems like a fairly abitary concept.
If there's an object in the collection that doesn't have the
associated
data, I would think.

I am trying to burn CDs to an external hard drive to conserve space on our laptop. When I change the file location it says the folder on the external drive is invalid. Am I missing a step?

I am trying to burn CDs to an external hard drive to conserve space on our laptop. When I change the file location it says the destination folder on the external drive is invalid. Am I missing a step?

It does, but that's definitely strange. Try showing all hidden files and folders on your Mac to see if that helps.
To do this, head to Applications -> Utilties -> Terminal and type:
defaults write com.apple.finder AppleShowAllFiles TRUE -> Press Enter
killall Finder -> Press Enter
Then navigate out to your iPod again via the Finder. Any luck now?
B-rock

My iphoto library folder with files of my pictures is missing from the pictures folder, only the application icon remains. I have read through similar discussions but have not managed to fix the problem with the recommended solutions. Can anyone help?

I have a Macbook Pro with iphoto '08 running on Mac OS X version 10.5.8. I used to be able to go to my pictures folder on my HD and access my pictures via that iphoto library folder. There used to be a small arrow next to the iphoto icon with all the albums then listed within the folder (to the right). That arrow is now gone and all I have is the iphoto application icon which just reopens iphoto when I click on it, but I want to be able to access the data files. Somehow I do have files btwn 2008 and 2009 but it hasn't created these since then...Could someone please help me to restore this ability? I have read other similar posts but they seem to be related to lost data all together and I do luckily have all my pictures in iphoto still. I just can't access them in the pictures folder which means I can't access them on my external hard drive. I am now out of start up disc space somehow so I figured I had to delete some albums (I have 12,090 pictures) and do have them backed up but want to make sure I can go back for them when I need them. I did export all the pictures to a folder on the hard drive but it is all 12,090 in one long list with only numbers as names and not in any order, this will be a nightmare to access later! Please help! Thank you!

You can’t open your current photo library using this version of iPhoto.
That indicates that that is your library. Put it in your Pictures folder if it already isn't there and make sure it's named "iPhoto Library". It should look like this:
Now launch iPhoto with the Option key held down and select that library to open. If you get that same message close iPhoto and try the following;
Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

Backup issues. Trying to delete iTunes preference files, but Apple Computer folder is missing (should be in the roaming folder)

Want to backup before a restore, but I have no backup option available in iTunes. I'm pretty sure I found the answer as this has solved the problem for others in other forums:
Remove iTunes Preference files
Some of the files that iTunes uses to store settings and preferences may be unusable and cause issues. iTunes has two folders where preferences are saved. Move one of them to the desktop and test to see if the issue persists. If it does, move it back and remove the second folder. The location for the two preference folders are:
C:\Users\username\AppData\Local\Apple Computer\iTunes
C:\Users\username\AppData\Roaming\Apple Computer\iTunes
BUT after getting into both my roaming and local folder I find I do not even have an 'apple computer' folder. I have iTunes installed on my computer and have used it so I am confused. I use Windows 7.
I would appreciate anyone's help. Thanks!

Nevermind. I found the files. It didn't work anyway as the files kept repopulating themselves after I deleted them and reopened iTunes.

Flex 2.0 Final - Not able to Find WEB-INF/Flex Folder

Hello,
I am having trouble with the Final Flex 2.0 Finding the
WEB-INF/Flex folder in my root directory of C:\CFusionMX7\wwwroot\
It will not let me validate a Location. Everthing is
installed correctly and I am able to run and connect with previous
projects created with Beta 2 & 3. I am not able to create a new
project for some reason. FDS works fine just not Coldfusion Flash
Remoting.
Do I need to reinstall Coldfusion ??? or can I change a
Config File Somewhere???
Any one run into this problem?
Rich

I received this problem a while ago, when learning flex i
didnt think it was a back idea to copy the web-inf folder to where
ever my web root was going to be... but the one downside is that if
any updates come out, i think in order to make sure all stays up to
date, you should probably re copy the web-inf folder. it's manual
and could become tedious if you copy this folder into any number of
places.... and then you dont remember where you put it.... i would
think there is a way to map the web-inf folder some how to your
project... but i dont know how? anybody?

[svn] 3879: Missed a file in the last submit.

Revision: 3879
Author: [email protected]
Date: 2008-10-24 11:59:14 -0700 (Fri, 24 Oct 2008)
Log Message:
Missed a file in the last submit.
Move modules\webtier files down to modules\webtier\j2ee in preparation for adding modules\webtier\flexcm files. Jim is in on this.
Modified Paths:
flex/sdk/trunk/webapps/webtier/build.xml

No, your response didn't answer my question. What you described was how to save to the same file every time. That was not what I asked. Specifically, when saving a pdf/jpg or whatever to a folder, Firefox generally goes to the last folder used. I have multiple subfolders under a directory entitled "My Pictures". If I save a file to one of these subfolders, the next time I want to save a file, Firefox usually pulls up that particular subfolder, but 40% of the time it does not. It jumps around all over the place and I then have to redirect Firefox back to the last subfolder used. This usually works for some time, but for no apparent reason, Firefox then decides to pull up a different subfolder. What I am looking for is a way to force Firefox to ALWAYS go back to the last subfolder into which I saved a file. If you can help me, many thanks. If not, please let me know.

Links according to the folder where the file is?

I have this script that I found here on this forum and would like to change it so that when you execute it according to relink the file name
# target illustrator
linkReplacer function ( ) {
     var = orginalUIL app.userInteractionLevel ;
     app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS ;
     if ( app.documents.length == 0 ) {
          alert (' Please have an " Illustrator " document open before running this script . ' ) ;
          return;
     Else { }
          docRef = app.activeDocument ;
     defaultFolder var = new Folder ( ' ~ / Desktop ' ) ;
     psdFolder defaultFolder.selectDlg var = ( ' Please select the folder of your replacement files ');
     if ( psdFolder == null) return ;
     with ( docRef ) {
          placedFiles var = new Array ( ) ;
          for (var i = 0; i < placedItems.length : i + +) {
               placedFiles.push ( placedItems [i]. file.name );
          for (var j = 0 j < placedItems.length j + +) {
               var replace = new File ( psdFolder.fsName + '/' + placedFiles [ j ] ) ;
               if ( rePlace.exists ) {
                    placedItems [ j ] . file = Replace ;
               Else { }
                    alert ( 'File " ' + placedFiles [ j ] + " ' is missing ');
     app.userInteractionLevel = orginalUIL ;
linkReplacer ();
for example
filename > TESTE_0000_CLOSED_01
link contained in the file > TESTE_0000_INDEX
link contained in the file folder ( TESTE_0000_CLOSED_01 ) is TESTE_0000_INDEX_01
after running the file the link is > TESTE_0000_INDEX_01
I do not know if I was clear is complicated to explain
when run this script searches the linked item in the folder where it is saved, like that instead he relink the file contained in the folder under the file name

Hi,
Thanks for all the quick replies!
If I use Application.ExecutablePath I get:
C:\Documents and Settings\Administrator\Definicoes locais\App2\2.0\EG5PGYGH.6NX\.....\App.exe
I published the application in a Tools folder and I need to go up in the path to refer to other folders in the same directory as the Tools.
So I have a Directory named Application and folders inside: Tools (where I publish the application), SO, Acet, Others. As I will copy the application to another computer while maintaining the same folder structure I need to get the path till the Tools (with
or without the executable name).
Any other hint, please?
Thanks.

When I click on a folder in the bookmarks toolbar, it often won't open

Staring with Firefox version 4 and higher, I've been experiencing a strange problem with my bookmarks toolbar. If I try to open a folder from the toolbar while a site is loading, the bookmarks inside of the folder will not appear. As a workaround, I have to move my mouse to another folder and open it. Once I do that, I can go back and open the folder I wanted to open in the first place. For that matter, this seems to also happen with buttons on the main toolbar (but only when a page is in the midst of loading). Have you ever heard of this behavior before and if so, any ideas as to what's causing it?

Perfect! I had googled around found other edits to userchrome.css that didn't quite work for me, but this is just what I needed. Not sure how I missed it. Thanks!

How can I open all the tabs saved in a sub folder of the bookmark menu simultaneously in a single click/command ?

I have saved some of the related tabs in a common sub folder in the bookmarks list and whenever i have to open this tabs always i have to open them individually coz the 'open all in new tabs' option is not available for subfolder, so is there any command or click available from which i can directly open all the saved tabs of a subfolder simultaneously in one single attempt ? using vaio laptop, windows 7 basic, firefox version 6.0.2 !

yes i do that on my desktop but i dont have middle click option on laptop and even in the right click context the ''open all in tabs'' option is desplayed but is in light color i.e. not functional. Is this a problem with windows 7 or missing plugin or add on could help or extension of some sort ? please help !

Bug with workflow that creates a folder and sub folder with the same name.

Hi,
I've found a possible bug in SharePoint 2010 workflows. I only have access to SharePoint 2010 and SharePoint Designer 2010 over my companies intranet, afaik I don't have access to to logs or anything server side so sorry for the any missing information.
I had some problems with a workflow in one list that needed to create some folders and subfolders in a second list. The production version did a lot more so I setup a test area with 1 list and a workflow that only does the folder creation part and have managed
to consistently replicate this problem.
The test list has two columns, [title] and [sub folder title]
The workflow starts by getting the values for [title] and [sub folder title] into variables.
It then creates a folder in the same list with the same name as [title], and then creates a sub folder under this with the name from [sub folder title]
So the resulting structure would be:
Test List:-
List item with fields [title] and [sub folder title]
[folder: title]:-
[folder: sub folder title]
If both folder names are different (e.g Folder1 and Folder2) then it works perfectly fine, if both folder names are the same (regardless of character case, e.g. samefolderName and sameFolderName) then the workflow fails.
As part of the test i made the first action of the workflow to log the message "Workflow Started" to the history list. When the workflow fail there's nothing logged in the history list other than the error: "The workflow could not update the
item, possibly because one or more columns for the item require a different type of information."
Creating a sub folder with the same name as it's parent works fine manually but for some reason a workflow can't seem to do it in one action.
As there's no history list entries before the error it looks like the workflow is just failing to start but if i do something like add an if statement to check if [title] and [sub folder title] are the same, and only create the subfolder when they are not
then it runs fine doing what it's set to.
The function of the workflow in our office was for convenience so were just working without it. Just wanted to post to see if anyone else has come across this/could try to replicate or explain this and see if it's a SharePoint bug or something specific
to our setup.
thanks,
Martin

not sure about the specifics of your workflow, but if you're querying the list for the folders... keep in mind that a list lookup will only ever bring back ONE item... even if there are several items that meet the filter criteria... example: if i search
a list for an item assigned to "john doe", there may be 15 tasks that meet the criteria, and it'll only grab one... this is why SP Designer WARNS you when your list lookup may exhibit this behavior.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Creating a project in Flex Builder for the Hybrid Store sample Application

Hi all,
How to create a project in Flexbuilder for the hybrid store
sample application.
I downloaded the source code of hybridstore application,
Now i have to create a project for it to run that application
in my system,
will you please tell me how to create a project for this
sample.
I have also read the readme.html file. but i could not follow
exactly what they are saying.
what i did is, I unzipped the source code into a folder
hybridstore.
I opened the flexbuilder : File -- new -- flexproject ( i
have selected) then i have given name to my file (hybridstore) ,
and set the path to the hybridstore folder where the source code
exists.
but it as created hybridstore.mxml file also.
it is not working.
will you please till me how to create project for this
application.
I have created project for other samples like restaurent
finder, dashboard. they are working fine.
I got problem with this sample only.
Thanks in advance
Regards
Avanthika

Hi,
thanks for your reply,
I have tried to open using file import, but still it is not
working.
in the readme file for this application , contains how to
Creating a project in Flex Builder for the Hybrid Store
application:
Name your default application catalog.mxml.
Prevent Flex Builder from generating an HTML wrapper: select
Project > Properties. Select the Flex Compiler page, deselect
the Generate HTML wrapper file option .
Create a Run configuration for your project but deselect the
Use defaults option and instead assign the Run setting to the
hybridstore.html in your project's bin directory.
To enable debugging of the Hybrid Store application you must
create a copy of hybridstore.html. Open it in an editor (you can
right-click on the file and select Open With > Text Editor).
Find the line that says "src", "catalog" and change it to "src",
"catalog-debug". Assign the Debug setting to this new HTML file.
As i am new to flex , i could not know how to do this.
please help me how to do this.
regards
Avanthika

Missing flex folder in the FDS

Similar Messages

Maybe you are looking for