MIssing folder Library/Application Support/iCal folder

Hope this is in the correct discussion!
This folder is missing from my MBP. On Time Machine, I can't find it and have gone back to March 2012 when TM starts.
Does it create itself and what data would it hold?
I've lost all my iCal calendars and have a back up at 18/7/12. I've restored Library/Calendars but the entries don't show up in iCal. I'm told I need to restore Library/Application Support/iCal folder, but it's not there.
I've created a current entry (in a new calendar) but still no Library/Application Support/iCal folder.
Should I be trying to create it manually, somehow I don't think so?
Thanks for any help.

Choose Go to Folder from the Finder's Go menu and provide ~/Library/Application Support/iWork/Keynote/Themes/ as the path.
(90962)

Similar Messages

  • I installed LR CC , but when i try launching it flashes & it is gone. I tried the solution in the Adobe Site - which says search for the folder Library/Application Support/ Adobe/ Sl Store ...., but i can't seem to find the SL Store or SLCache folders ( i

    I installed LR CC , but when i try launching it flashes & it is gone. I tried the solution in the Adobe Site - which says search for the folder Library/Application Support/ Adobe/ Sl Store ...., but i can't seem to find the SL Store or SLCache folders ( i use the Mac). Only then can i apply the solution. I just cant seem to find the folder in the first place

    That did not work for me & as per adobe site help if signing out does not help- we are supposed to go the above folders & do some additional steps, but i could not find the folders & hence the question

  • Why is there no plug-ins folder in my Library/Application Support/Adobe/ folder?

    As with many other users, the "Open in Camera Raw" option is grayed out in Bridge CS6.
    I downloaded the suggested plug-in and tried to follow the path: Library/Application Support/Adobe/Plug-Ins/CS6/File Formats folder
    But there's no Plug-Ins folder under Library/Application Support/Adobe.
    I'm going to the Library folder that comes up when I click Go while holding down Option.
    Am I doing something wrong?

    Okay, I went to Home and then ~/Library and clicked Shift+Command+G -- and there's till no Plug-Ins folder under Library/Application Support/Adobe.

  • TS3519 Library/Application Support/Aperture folder problem

    I have Aperture 3 upgrade from Aperture 2.  When I originally installed the upgrade for version 3, there was a small problem in that I had upgraded to version 2 from the version 2 trial; Aperture 3 did not accept the version 2 serial number for some internal reason.  I contacted Apple and they supplied a valid serial number to allower version 3 to install as an upgrade.  That's the back story.
    Just recently, I tried to install a plug in (aperture to zenfolio) in the Application Support/Aperture/Plug-Ins/Export folder, but my machine did not have that folder.  I was told I could create that set of nested folders and then install the plug in.  Somehow though, I changed a permission setting on that set of folders and Aperture is asking for the current serial number and a valid serial number for the upgrade.  I've tried  both serial numbers for the version 2 software, but version 3 does not accept either.  I am at wits end and I don't want to reinstall Aperture since I'm concerned that a lot of the presets might disappear.
    Any thoughts?

    and you know this because spotlight could not find it?
    Well, spotlight does not search the system disk.
    The relevant file will be found in /Library/Application Support/ProApps/Final Cut Studio System ID

  • User/Library/Application Support folder empty

    I had to hard restart because of a frozen screen. Could not force anything to quit. iWeb was open at the time. On restart, my iweb came up asking for a Domain account as though there was never one created.
    I checked my home folder/Library/Application Support - it is completely empty! Nada! What the hey?! I pulled a Domain.sites.2 file from an external drive and clicked it, and it started fine (from my last save point several days ago).
    I opened "Backup.app" and it opened in default mode as though I had never set up a backup. Only yesterday morning it had automatically backed up my Home Folder and my Personal Settings - now nothing?
    I clicked on the most recent iLife backup file on external - it would not open. Ditto with the last Home Folder backup file. Ran Permissions and it corrected a Library file, but that didn't help.
    reset PRAM (two bells) still no files. LIbrary/Application Support is completely empty. Any ideas.

    It sounds like some Hard Disk Corruption.
    First see if this happenned...
    Return to default desktop, apparent "loss" of home directory...
    http://docs.info.apple.com/article.html?artnum=107854
    Could be many things, but it's best to start with these two steps, which may fix it also...
    "Try Disk Utility
    1. Insert the Tiger Mac OS X Install disc , then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, *you must select your language first.)*
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
    Safe Boot... holding Shift key down at bootup. Safe Boot is a special way to start Mac OS X 10.2 or later when troubleshooting.
    http://docs.info.apple.com/article.html?artnum=107392

  • I can not find library/application support folder for garageband

    Hi,
    i am trying to install au plug ins to garageband but i can not find the folder library/application support/audio
    please help
    Many Thanks

    That was for audio plug-ins.
    Here is the Application Support:
    Here is the Path: Hard drive --> Library --> Application Support --> Garageband

  • I can't find iweb folder in application support

    Hi
    I formatted my macbook. Before format I back up domain.sites2.
    Now I want to import domain.sites2 to new macbook (I mean formatted macbook)
    I read forums and I saw that I have to copy+ paste this file to  library/application support/iweb
    But there is no iweb folder in application support.
    I double clicked domain.sites2 while located in desktop; İweb opened but I can't see my older pages.
    Please help me  
    Engin

    Leave the old domain file in the iWeb folder and use the following app to see if it will let you open that particular domain file.
    To open your domain file in Lion, Mountain Lion or Mavericks or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script"/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"
    delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files. 
    Due to Sandboxing by the operating system you may get a message that the app can't be opened because it's from an unregistered developer. In that case you can Control (right) - click on the app and select Open from the contextual menu OR create your own app from the code above using Applescript Editor.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible in Lion or Mt. Lion enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    For Mavericks, 10.9 ,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    You only need to run the app once or if you want to open a different domain file.

  • Can't open file "~Library/Application Support/iWeb/Domain.sites2" from a backup

    I've done my home work on this one. I'm trying to recover the Domain.sites2 files from a backup on to an OS 10.6.8 with iWeb 3.0.4. It allows me to create a new site perfectly but I followed these instructions at iwebformusicians including deleting the .plist preferences file, restarting and running DU/Fix Permissions, running BatChmod based on this suggestion, and even deleting the .plist files from the Domain.sites2 package based on this suggestion. I also tried DomainCracker based on the tips at iwebformusicians since there are 2 domains in the sites2 file.
    At a loss here. I still have all the web pages in the Sites folder. What are my options? Is the file really corrupt?

    Try the following:
    delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
    go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
    Click to view full size
    launch iWeb and try again.
    If that doesn't help continue with:
    move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
    launch iWeb, create a new test site, save the new domain file and close iWeb.
    go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
    move your original domain file from the Desktop to the iWeb folder.
    launch iWeb and try again.
    OT

  • Install error on Mac "could not create ~/library/application support/adobe/coresync"

    Any reason why this would be happening and what I should do?

    I'm getting this same error after trying to install on my mac pro.
    I see that the cloud installer was able to create the ~/Library/Application Support/Adobe folder and a bunch of folders in side that, but it complains
    about not being able to create the CoreSync folder.
    I ran into this, then uninstalled everything, and nuked the ~/Library/Application Support/Adobe folder completely and started over.
    The installed created the Adobe folder and "AAMUpdaterInventory", "AdobeApplicationManager", "Extension Manager CC", OOBE, SLCache, SLStore, Vulcan
    folders just fine.  but it can't create the CoreSync folder in the same location.  
    I'm stuck.

  • Getting error Can't open file "~/Library/Application Support/iWeb/Domain.sites2." when trying to open iWeb?

    I recently had to replace my harddrive a few months back and tried to open my iWeb to update my website.  When I click to open it, I get "Can’t open file “~/Library/Application Support/iWeb/Domain.sites2.”  I uploaded iLife again but that didn't seem to help.

    Did you confirm that you have a Domain.sites2 file in your Users/Home/Library/Application Support/iWeb folder?  If so double click on it to try to open with iWeb.  If that doesn't work try the following:
    delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home()/Library/Preferences folder.
    go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
    launch iWeb and try again.
    If that doesn't help continue with:
    move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
    launch iWeb, create a new test site, save the new domain file and close iWeb.
    go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
    move your original domain file from the Desktop to the iWeb folder.
    launch iWeb and try again.
    OT

  • I get this message: /Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue

    Suddenly get this message and Photoshop won't function
    Fatal error missing component
    /Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework
    Onv CS4 is old but it was working. I bought it online legitimately.
    I don't think I have the discs
    How can I reinstall the software at no additional cost?
    Mike

    Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
    To help others help you, please read through this article and provide any additional relevant details.

  • Missing Address Book Folder in Application Support

    I've been having problems with my Address Book for a long time, now. Ever since my friend accidentally synced his iPhone with my computer and merged all our contacts. I had gone in and deleted the contacts, but the program has been buggy. As it stands, there are 0 Cards in my Address Book.
    I loaded the BETA for Face Time for Mac to see how it worked, knowing that I had nothing in my Address Book. Or so I thought. The BETA application pulled names from way back when my friend had all his contacts on my computer, and my old ones, but they aren't around!!
    I started looking around for what could be wrong, and realised the folder for Address Book in the Application Support folder is missing (i.e. ~/Library/Application Support/Address Book/)... What do I do?
    Please help.

    Thanks for the "helpful" star feedback.
    koabehr wrote:
    Is there an option for us non-Time Machine users?
    I am getting an external hard-drive this winter, but I don't have one yet. So a solution other than that is ideal.
    (1) Instead of Time Machine, you could restore your contacts from other backups you use. Moreover, there is no requirement for the backup files to be on a hard drive.
      http://support.apple.com/kb/HT1553
    Even if you do not backup your entire startup disk, you will want backups of any important, expensive, or irreplaceable files plus those shown in this Apple article:
      http://docs.info.apple.com/article.html?path=Mac/10.6/en/8771.html
    (2) If you have no backup, the only way I know to get your Address Book contact info back is to recreate it.
    As soon as you re-enter your Address Book info, use the Address Book > File > Export... > Address Book Archive... menu command to create an archive.
    The archive can be used to restore your data should the problem occur again. Rather than recreating the entire Address Book database, you can restore the archive and will then need to recreate only the changes since the archive was created.
    Typical Address Book archives are only a few megabytes, so, in addition to keeping a copy in your Documents folder, you can save an extra copy on another computer, writable CD or DVD, or even Flash (jump) drive. To safeguard against loss due to hard disk crash, it is vital that you keep your principal backup/archive somewhere other than your startup disk. I think you can see that more than one copy on more than one media is a good idea.
    I am slow on the keyboard, so I recreate my archive monthly in addition to Time Machine and the other backups I keep.
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.4); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

  • I want to open a domain.site2 file outside the default folder (User/Library/Application Support/iWeb) with iWeb11, but iWeb only opens the domain file in the default folder. If I delete the default domain file, iWeb wants to create a new site. Help please

    I want to open a domain.site2 file outside the default folder (User/Library/Application Support/iWeb) with iWeb11, but iWeb only opens the domain file in the default folder. If I delete the default domain file, iWeb wants to create a new site. Does anyone have the same problem or know how to fix it?

    In Lion the Finder folder is now invisible.  To make it permanetely visible enter the following in the Terminal applicaiton window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    For opening your domain file in Lion for the first time or to switch between multiple domain files  Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an applicaiton.
    Just launch the applicaiton, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    OT

  • Trying to install AOM in Bridge CC but can't find the "Mac OS: /Library/Application Support/Adobe/Bridge CC Extensions" folder - where is it? Thank you!

    After updating to 10.9.2 the Finder changed and I feel something is hiding - for example, I no longer seem to be able to "GET INFO" about my hardrive... only my drive and "my documents" etc... maybe this has something to do with not being able to find this folder:  Mac OS: /Library/Application Support/Adobe/Bridge CC Extensions

    Jeff... Yes. I meant to mark this solved - found another thread recommending using FINDER-GO TO- and /Library/Application Support/Adobe/Bridge CC Extensions.
    It worked easy.
    That little bit of info would be a great addition to that install AOM instructions.
    Thank you for asking!

  • Can not find folder to load camera raw presets on MAC.  I have searched and says to drop in the library/application support/adobe/camera raw/settings folder but I do not have this folder or can no locate it. I get as far as lib/appsupoort/adobe/camera raw

    I just made the switch to mac. I am have installed all the new PS6 CC and bridge and I am not trying to add some presets to my  ACR but when I search for the folder to place them it is not there.  From what I researched it says it should be under camera library/application support/adobe/camera raw/settings but I can only get to library/application support/adobe/ and then there are two different camera raw options I have checked both and there are not settings folder. If anyone can help me please thanks

    You want your user library
    Mac(user)/Library/Application Support/Adobe/Camera Raw/Settings
    In finder click on Go then hold down the Option key and then click on Library

Maybe you are looking for

  • Upgraded to Desktop 6.2.2, now 755P crashes

    I've been a happy treo user for years. A few days ago, I had a problem. I upgraded Palm Desktop to 6.2.2 and synched my 755P. Somewhere in the process (it might have been from the download page), I got a message that some programs might be incompatib

  • Acrobat 9 Pro can't read out loud

    I've always been able to use Acrobat's "Read Out Loud" feature to help me proof complex documents by having Acrobat read the PDF aloud while I read the original to check for discrepancies. Since upgrading to Acrobat 9 Pro Extended version 9.4.6 on Wi

  • Quicktime download

    when i hit the itune for my nano i come up with quicktime faild to initialize error#2093. went to download quicktime 7 and it says your current security settings do not allow to download this file. dont know which setting to change so it will downloa

  • Programmatically Turn Off Printing (Acrobat 6.0)

    Hello. I'm searching (fruitlessly so far) for an option to turn off printing on a PDF. I've gone down multiple avenues and have come up empty to date. My company is using Documentum SCS and Content Transformation Services (Documentum) to export/conve

  • Problem with Dreamweaver CS5.5

    I have a proplem with Dreamweaver CS5.5 CSS panel. When you in the css panel box when you select and add a property, and then tab over to enter the values, all it does is highlight the box. In all previous versions when you tab over, you would be aut