Missing Folders When I Export

Lightroom 2.6
Win 7
If I export in Develop mode and choose the folder only some of my folders show up. I want to put it in E:\Photos\For Printing but when I select Choose it's not in the pull down. In fact most of the many folders I have aren't there but are, of course, in Explorer. I only have one Catalog and it is selected.
Any hints appreciated.
Thanks,
Tom

No, none of the folders are marked Hidden in folder properties. I wish it had been that.
Here's something. When I uncheck Read-only in the folder properties and apply I can then see all the the files. It doesn't stay unchecked, however, after I get out and go back in. I'm not sure how to permanently uncheck that.
Thanks for the suggestion though.
Tom

Similar Messages

SSRS 2008 R2 - Missing Data when Exporting to Excel or CSV (Row Count is 500)

Hey Folks,
When exporting SSRS 2008 R2 report to an csv or excel file not all the rows are being exported. Any suggestions on why this is occurring. The number of rows is less then 500 and it seems to be a pretty straight forward export. Any help is
greatly appreciated. Inherited this and not sure if this would be configuration issues or something else. It is happening on a number of reports.
Thanks.

Hi Humbly,
According to your description, when you export report into CSV or Excel format, some rows are missing.
In your scenario, since you are missing data “rows” in your exported file, we are guessing if you have any visibility setting like toggle which hide those records. It’s possible that you have set toggle or visibility in your report. After exporting
Excel/CSV, some data might not appear properly. In SSRS 2008 R2, it has reported this kind of issue about data missing after exporting. However, those scenarios are not exactly same as your issue. It mostly turns out be conflict between data and “layout render”
and related to DataElementOutput property. DataElementOutput property controls export behavior, it indicates which report item data should appear in Excel/CSV render. For more information, please refer to this article: Reporting Services:
Why aren’t all my report columns exporting to CSV and/or XML?.
As we tested in our environment(SSRS 2008 R2), no matter what we export into CSV or Excel, we get same results as in BIDS . So I would like to know your report design structure. If possible, please provide some screenshots about results in BIDS and Excel/CSV
render extension results. It may help us find out the root cause of your issue. Thank you.
Best regards,
Qiuyun Yu

I am using Lightroom 5.7, 64 bit with Windows 7 Professional. For no apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now I notice that my LR directory of folders

I am using Lightroom 5.7, 64 bit with Windows 7 Professional. For no apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now I notice that my LR directory of folders in Library view does not show images correctly: If there is a folder with sub-folder(s), the folder will indicate 0 images, but the sub-folders show the proper number of images. What happened and is there a fix? I tried uninstalling Lightroom and re-installing, but problem persists.
Here is a screen shot of the error message:
Message was edited by: Joseph Costanza, Jr.

See here for a solution.

Missing data when exporting to "MS Word (*.doc)" and "RTF (*.rtf)"

Hello,
We are using CR XI R2 SP3 in our product. The reports that we generate (using ODBC dsn) show URLs from the database as hyper link text fields. When we export the report to "Microsoft Word (.doc)" or "Rich Text Format (.rtf)" format, even though the export operation succeeds, the report is missing data when it encounters a URL that looks like following. There is basically no data after that URL.
http://www.xyz.com/kType=t;s.linkName=n;s.t()};s.ssl=(s.wd.location.protocol.toLowerCa
And when it encounters a URL like following, MS Word complains that the file is invalid even though the export succeeds.
https://www.xyz.com/m));if(m%3E0&m!=e)if(parseInt(c.substring(m+1,e%3C0?c.length:e))%3Cd.get
If we export the report to pdf format, then everything works just fine.
Any help on this will be highly appreciated.

Hi Sumit
Try to set the URL field with the RTF format. To do this try following:
1. Right click the field->Format Field.
2. Click the paragraph tab->Text Interpretation->RTF Text
Now try to export it.
Hope this helps.
Regards
Nikhil

Missing data when exporting webi to excel (not 65536 limit problem)

Hi guys
I just meet a problem about webi that it will miss data when exporting webi to excel.
It's not about 65536 limitation, as my webi report do some aggregration and limitation and never beyond that limitation.
Also there are 2 tabs in my reports, if I split the 2 tabs into 2 separate reports and export them separately, then problem disappeared.
Any ideas on this?

Hello Claes
according to:
http://help.sap.com/erp2005_ehp_05/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
Tools => Import and Export => Specifying the Sequence of the External Data Structure => External File Structure: Specification
Table EST07 should be part of export file. I am not sure if the packing requirement ist part of EST07.
Furthermore wirh ECC 6.0 EnhPAck3 some changes happend generally in the area of DG classification.
E.g. Dynamic dangerous goods classification. I am not sure if these changes are "included" in some sense in the EH&S data download.
With best regards
C.B.
PS: please check this link on the top:
http://help.sap.com/erp2005_ehp_05/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
Refer to "Table Assignment: Specifications"
I believe packaging requirement is part of table EST0B but this is part of the download file.
Edited by: Christoph Bergemann on Aug 27, 2011 7:12 PM
Edited by: Christoph Bergemann on Aug 27, 2011 7:13 PM

**Missing Audio when Exporting to HD**

Hi,
I have been trying to find a solution to missing audio for sometime and there are many discussions on this forum regarding this topic. I have an external drive and in the past I have lost audio, I guess because the event and the project were on different drives, I have resolved that. Also, the problem that I have is not related to the speed of a clip or that I have more than 10GB in my events (I don't). There have been other audio issues and I have always been able to resolve them but this one has me stumped! I thought that perhaps the graphics card was not up to the task but this has just happened and now I am confused.
I have just completed a project that was only 3 minutes long 403.5 MB. The movie was imported to iMovie from my video camera and listed as an Event, I also used movie clips and stills from iPhoto, I added titles and transitions. I then exported the movie to Media Browser (mobile size) so that I could import it into Garage Band to make an soundtrack. I then exported the soundtrack as an AAC to iTunes (as I have read that there are issues with MP3 and audio missing). I then opened iMovie and dragged the soundtrack into my project and republished the completed project to Media Browser in the HD size. No problem all works well, I was really happy! Onwards I thought and get another 2010 video finished, wrong!
On my next project I have done everything that I have described above, this time the project is only 349.8 MB (smaller). The audio on the HD size has failed. I have copied all the files onto my desktop and reimported everything. I have tried exporting using Quicktime or as a Movie but still no audio. I have found that the 'consolidate media' is grayed out when I have all my clips in the project editor, because they are all on my hard drive. As soon as I add the iTunes track that I have exported from Garageband the consolidate media option becomes available. If I select this I then get the message that the iTunes track cannot be copied as it is not on my hard drive! It is on my hard drive (I disconnected all external drives so that there would be no confusion!).
I cannot understand how the first project worked and the second smaller project failed using the same process! I thought that I would share this information with the forum in the hope that perhaps a solution can be found. I am able to publish the second project to my mobile me in the large and mobile sizes, it would be good to have the HD size for a DVD. There seems to be no logical pattern to the audio disappearing on export. Your thoughts or help would be very welcome.
Kind regards,
Watchthebat.

In Soundtrack if you have selected to use only channel 2 of a stereo file (right click on stereo file and select mono->channel2) you will hear channel 1 when you export. Its a massive bug.
Could that be the source of your problems? The bug can certainly create exported mixes that sound like stuff is missing.
There's a recent thread around here about this.

When I export an indesign document the graphics are missing from the eps file.

When I export an indesign document the graphics are missing from the eps file.

The why it isn't working can be a number of reasons. While I never have exported an EPS out of ID before, I just tried it and it worked fine.
What "graphics" are missing? I used bitmaps, native drawn ID vector, lines and a placed EPS file. Came into AI as an opened EPS fine.
Links up to date? For items not hitting the EPS, are they on a layer set to non-printing?
In the export dialog,General tab, PostScript Level 3? Data format set to ASCII? On the Advanced tab, Send Data set to All? OPI off?

Premerie Pro CC - have sound on timeline, yet when I export file i am missing sound in one tiny clip. Can I be related to working with Merged clips?

Hello Premerie Pro CC community,
I need help, I am working with merged clips (the video footage shoot with a DSLR and different audio recorders). I have a timeline in premerie with sound all finished. Everything was fine until I when and fine tuned some of the audio, just added key frames to correct and now when I export my sequence I am missing sound in one little clip of the entire mov.
Does it have to do with sound and editing with a merged clip?
I have tried to export in several different settings and still the same result, and when I look at my timeline the sound is all there.
I have until the end of Monday to figure what I have done incorrect
thanks
-DragonFly

In case it is a phase problem, try adding fill left effect to the faulty clip.

Missing lines when exporting to local file

I've recently created a query in SQ01 which pulls out sales order information and uses a data reading program to display the texts.
The query works absolutely fine and shows all the data required in SAP.
The problem comes however when I export it to Excel using the ALV functionality of Export to Local file - spreadsheet. some of the lines in the middle of the report are missing in the saved excel file despite them being present in SQ01.
However if I use the method of Export to local file - in the clipboard... and paste the data into an excel sheet, all the lines are present.
What could be the cause of this issue? I could use the method of copying to the clipboard but a lot of people use this report and they aren't all comfortable with the copy paste method (because you then have to perform text to columns etc.) so it would be better if I could work out why it's not working in the original way and fix it.

Hi Benjamin,
let me first put in a question.
Why don't you use the direct to excel export?
If there's an issue with the inplace excel, there's an easy work-around for that.
From the alv-grid chose printing preview, when you use the excel button from there, you'll get the popup asking you for format, table type etc. and then rewards you with a (usually) complete and readable excel.
Note, that the download to local file, with spread-sheet option, creates an ascii csv file, with an xls extension. It's not quite an excel file.
It might be exccel and not the export.
Give it a try.
BR - Jörg

Missing pages when exporting to ePub?

I'm using Indesign CS4 to create an epub. However, when I export it, pages out of my book are missing. I have applied character and paragraph styles to all the text, and everything is in the indd file, just not in the epub. Does anyone have any solutions that might fix this problem?

I think I figured it out. I had multiple paragraph styles in the same group. When I put them in different boxes, it worked

How do I add silence to the beginning of a track? Before the 10.0.3 update, you could drag the region further into the timeline and it would automatically create silence before the track plays when you export it. What am I missing?

Before the 10.0.3 update, you could drag the region further into the timeline and it would automatically create silence before the track plays when you export it. What am I missing? How do I i do this in the current version of Garage band?

what is the problem? Can't you drag the audio region to the right, or is the silence at the beginning of the track missing?
You could mark the measures you want to export by the Cycle region. Then any beginning silence will be included.

PPCS4: When I export, the shadows on titles are missing!

Hello,
I am using PPCS4 on Windows 7 (64-bit). I have a cineform sequence (1080-30p) on the timeline. Some of the titles I have use a drop shadow from the BCC6 effects from Boris FX.
I can see the drop shadow fine in the timeline (rendered or not) but when I export to any format, the shadow is missing.
Any ideas?
Simon

Simon,
If you find that there is a compatibility issue with the Boris plug-in and a 64-bit OS, please post. If this IS the case, I would guess that Boris is working on new 64-bit compatible plug-ins, as many 3rd party vendors are doing.
Good luck,
Hunt

PDF exported from InDesign missing background when opened in Illustrator

Hello, I am having a bit of a frustrating problem.
I'm working on graphics for a large project, and I have to get some of my files from InDesign into Illustrator (they are both CS5) for our printer.
I would have normally designed them in Illustrator but ALL my graphics are in InDesign and we just found out once we started on production that he needs AI and needs our trim path set up for our irregular shapes.
For MOST of the documents, its been pretty easy (exporting to PDF > opening in illustrator and making a cut path > saving as AI) however I have this one file that is making me lose my mind.
When I export it as PDF, it opens perfectly and looks normal in acrobat, and I also check it out in preview as well. The background shows up and everything. However when I open the PDF in illustrator it completely loses the background. I noticed it doing this before for a couple graphics, but I assumed that was because they had gradients drop shadows and transparencies and all that. This file has nothing weird except for a gradient grey background.
Help? I'm including some screenshots of whats happening in the hopes that you guys can help solve it.
So here we have me saving it, then opening it in Acrobat to check stuff out.
Now here is what happens when I open it in Illustrator:

Hi, Brie. I have been running into this issue for quite some time now. I also received the same response as you did. "Stop opening exported PDFs in Illustrator." This is an unsatisfactory answer for someone that works in the large format print industry that needs to preflight directly in the Illustrator program. I've done a ton of research and have been racking my brain for the last 2 years and have finally found sufficient workarounds for this issue. The downfall with these workarounds: all spot colors located in the gradients will convert to CMYK mixes. I'm still researching to see if there is a way to keep spot colors intact in these areas.
A little back story: InDesign is converting the gradients into something called NChannel. It enables more accurate handling of color blending by including additional dot gain and color mixing info. Both InDesign and Acrobat have the ability to display these elements whereas Illustrator, from what I’m finding, does not. Which is why we’re seeing gradient elements drop out when opened in Illustrator.
Workaround for CMYK Gradients
Open PDF exported from INDD in Acrobat
Go to Tools > Print Production > Convert Colors
Object Type: Smooth Shade (this tells Acrobat to hone in on Gradients only)
Color Type: DeviceCMYK
Check Embed next to Conversion Profile (should be SWOP)
Expand Document Colors on the right and Select DeviceCMYK in Color Spaces then click ok
Save the PDF
Workaround for 1 Spot Color in Gradients (Converts Spot Color located in Gradient to CMYK – all other Spots stay intact)
Open PDF exported from INDD in Acrobat
Go to Tools > Print Production > Convert Colors
Object Type: Smooth Shade (this tells Acrobat to hone in on Gradients only)
Color Type: Spot Color
Check Embed next to Conversion Profile (should be SWOP)
Expand Document Colors on the right and Select the Spot that is located in the Gradient in Color Spaces then click ok
Save the PDF
Workaround for 2 Spot Colors in Gradients (Converts Spot Colors located in Gradient to CMYK – all other Spots stay intact)
Open PDF exported from INDD in Acrobat
Go to Tools > Print Production > Convert Colors
Object Type: Smooth Shade (this tells Acrobat to hone in on Gradients only)
Color Type: Spot Color
Check Embed next to Conversion Profile (should be SWOP)
Expand Document Colors on the right and Select the DeviceN spot color that is located in the Gradient in Color Spaces then click ok
Save the PDF
Please try this and let me know if you have any questions! I'm always looking for new problems to solve! Good luck!
- Jenny

Missing € character when exporting from Indesign (CS4) to PDF

I think the subject line says it all. I'm not an expert user, but have not previously had
this problem. I get a new iMac with CS4 reinstalled
and now 'lose' the Euro character when I export my Indesign files to
PDF - does anyone have any advice please? Thanks.

Even so - I don't know why - but the problem is with some fonts that the Euro doesn't show.
I always use the Euro font for the Euro symbol and never have an issue.
Even if you do manage to get the Helvetica Euro to show up in the PDF there is a chance it can drop out at the RIP stage and not appear in print - I've seen it happen far too many times.
Euro font is your friend.

Missing class when exporting to jar

for some reason, when i export my project to a jar using eclipse, it exports all the files excpet the file that contains the main method.
the same project has been succesfuly exported before...
is it a bug in eclipse, or something i'm doing wrong, and is there a solution?

but i haven't cahnged my configuration and the same projects worked before...
even if i try just to export the main class to a jar, without any other files, all i get is a jar with only the metafile within

Missing Folders When I Export

Similar Messages

Maybe you are looking for