Missing Font for templates

Yesterday I tried to use some templates that I've used numerous times before, without a problem, and now Pages is telling me that fonts are missing, and that I need to reinstall them in order to use the templates. It's basically telling me this for every template. Can anyone help me out? Is this a bug? How do I locate these missing fonts, and how do I install them again? Thanks!

I would say that it happens so often to people that it is a bug that Apple does not handle the case better. However, I never had the problem myself, and there often seem to be some sort of logical explanation. I copy some links to earlier discussions on the topic and some comments, which apparently were helpful - at least when they were in context.
http://discussions.apple.com/thread.jspa?messageID=3555599&#3555599
http://discussions.apple.com/thread.jspa?messageID=3397736&#3397736
http://discussions.apple.com/thread.jspa?messageID=1188686&#1188686
http://discussions.apple.com/thread.jspa?messageID=1826371&#1826371
http://discussions.apple.com/thread.jspa?messageID=2511532&#2511532
"Here's what worked for me. I went to /Library/Fonts/ and saw one of the "missing" fonts, HelveticaNeue.dfont . I moved this file from the Fonts folder to my Desktop, and then I put it back in the Fonts folder."
"Maybe you've just disabled the fonts that Pages requests."
"I went over to my wife's computer...installed pages...
captured teh two missing fonts...emailed them to my computer...installed them in proper place and now all is well"

Similar Messages

Missing system font for template

I was trying to load a template (Info, Checkbox), but am getting the error message that this project uses a missing system font: applemyungjo regular. Anyone know where I can get this font?

I'm not sure why LT thinks it needs this Korean font, but it now has what it wants. When I did my erase and install of Leopard, I did not include the optional foreign fonts. I reinstalled the fonts from the install disk for the computer (without having to touch Leopard installation) and it works now.

Bug in Mail's handling of missing font for creating a "Note"

I try to keep my font library trimmed down to a minimum, since i don't use many fonts, and don't like to see cluttered font menus.
However I apparently disabled one too many fonts, and now Mail refuses to create "notes". When I go to create a new note, nothing happens at all... no error message, nothing (and this strikes me as a problem with Mail. I didn't go in and make any deep system level modifications, i simply used the Fontbook app that is available to all users, and switched off a few fonts, and now Mail is malfunctioning. It should at least give me a warning message).
My system console reports as follows:
11/12/07 8:37:11 AM Mail[152] * Assertion failure in +[NoteView updateFontAndRule:], /SourceCache/Mail/Mail-912.1/MessageViewer.subproj/NoteView.m:149
11/12/07 8:37:11 AM Mail[152] * WebKit discarded an uncaught exception in the webView:didFinishLoadForFrame: delegate: <NSInternalInconsistencyException> font-family cannot be nil
So,
1. Does anybody know which fonts Mail needs for Notes?
2. Is there a way I can/should report this bug to Apple?

If you create a metadatatype with a single metdata block, and you reference that in your vm/cm cell attribute using a *one* based index, Excel seems to see the link and it honors it when saving the spreadsheet.
So, I ended up with something like:
<c ... cm="1"/> (I'm dealing with cell metadata, but the concept is equivalente to value metadata)
<metadataTypes count="1">
 <metadataType name="MyMetaType" .../>
</metadataTypes>
<futureMetadata count="1" name="MyMetaType">
 <bk>
 <extLst><ext
uri="http://example" xmlns:x="http://example"><x:val>87</x:val></ext></extLst>
 </bk>
</futureMetadata>
<cellMetadata count="1">
 <bk><rc
t="1" v="0"/></bk> 
</cellMetadata>
Hope this helps.

A program to change default fonts for templates in Keynote

Has anyone written a utility to change the default on Keynote templates. Doing it manually seems like a lot of repetition.

You could try editing the source code for the widget.
I don't know enough about JavaScript to tell you how to do it, but to see the source, select the Widget file, Ctrl-click, and Show Package Contents.
It is either the parser.js or the Weather.js file that handles the instructions for the widget. If you can figure out where it pulls the default location, you should be able to hard code your city.

Missing font for Desktop 6 in XP ?

I installed the same download of 600_b047_multilanguage.exe on two separate xp machines selecting US English in both cases. One one machine the desktop software looks fine, but on my laptop the fonts are all just boxes. Any ideas ? Do I need to have a special font loaded ?
Solved!
Go to Solution.

Hey I just ran into this issue...
Any font guru's know where this might be occurring?
I had a display problem and some how when I got the display working again, the same problem exhibited itself, but only for DM... none of the other software has an issue?
I hesitate to reinstall DM because it's been so stable - I know one of the later versions would not work on my XPP machine and gave up worring about it last year.
I'm fairly sure I'm running DM 6.x
Maybe it's a Registry issue.
We're all out here together...

Missing font for terminal

I am setting up 42 new education emacs. Was doing some font clearing and apparently I did some thing that will not allow the terminal to work. I would think that the terminal font would be part of
system>library>fonts
which I did not touch. Apparently not because now all I get is a tine box with terminal that I cannot stretch
What did I do?
Thanks in advance.

Does the issue repeat in a new user ?
If not then try pulling ~/Library/Preferences/com.apple.Terminal.plist to the desktop, log out/in of the original user and see what happens.
Slim
MacBook Black 2GB/1GB, iMac G5 (iSight) 1.5GB RAM, iPod Shuffle Mac OS X (10.4.7) Linksys Router, Airport Express, ethernet switch

I had worked on my mac air and saved it in iCloud. When I opened in iPad air, some fonts are missing. How can I get missing fonts for my iPad air.

I am unable to download/update applications to me iPad

In the iCloud preference pane, sign in to the same account you use on the other devices, if you haven't already done that. Then check the box marked Contacts.

CS5.1 Missing fonts - converted to outline

Hello, I have PC with Adobe Master Suite CS5.5 installed.
Problem:
I had to open eps file, where is font Obelix Far East, which I don't have and needs to be replaced to Myriard.
When I open this eps, all Obelix's words are automaticaly converted to outlines.
original:
CS5.5 - immedatelly after opening:
Is any way to prevent convert words? I can see it first time, because before CS5.5 I used only CS4 and there was no problem with this. I simply replaced missing font for the known one and that's it...
Thank you very much for any idea.
Regards...Ilja

like maybe I hit some odd key command that made it all go away but I've been unable to get anywhere.
Yes that is the case, you accidentally must have hit the cmd + T key and now you have set Bridge to show only thumbnails.
Under the menu view you will see a checkmark in front of the option: "show thumbnail only" . Click on it again to deselect or hit again cmd + T (on a Mac) and you get back to the normal situation

CS4 - Missing Fonts Loader Plug-in?

I apologize if this has already been asked, but I am having difficulty with the missing fonts loader plug-in.
Q: Can some please give me a detailed (step-by-step) instructions for installing this plug in for CS4?
Q: What is this Microsoft Visual C++ 2005 Redistributable Package required for CS 4?
I need some assistance, please.
Thank you very much for any help!

I meant to add this as well.
Missing Fonts Loader Plug-in for Adobe InDesign CS4
The plug-in for Adobe InDesign CS4 is available on the Proxima Software Web site. This plug-in can automatically
activate missing fonts in Adobe InDesign documents.
Missing Fonts Loader Plug In
Product Adobe InDesign CS4 version 6.0
Description Automatic Activation of Missing Fonts
Operating System Microsoft Windows
Requirements Your missing fonts must be located in FontExpert
Groups (visible in the Groups view).
FontExpert 2009 version 10.0.
The plug-in may also work with FontExpert of earlier
versions 9 and 8, but FontExpert 2009 version 10.0 is
recommended.
File Name MissingFontsLoader.pln
How to Install the Plug-in
NOTE
The plug-in for InDesign CS4 requires Microsoft Visual C++ 2005 Redistributable Package
(available on the Proxima Software Web site, http://www.proximasoftware.com/download.htm ).
Copy the MissingFontsLoader.pln file to the Adobe InDesign plug-ins folder:
c:\Program Files\Adobe\Adobe InDesign CS4\Plug-Ins\MissingFontsLoader\MissingFontsLoader.pln
and RESTART Adobe InDesign.
(Where "c:\Program Files\Adobe\Adobe InDesign CS4\" is the folder where Adobe InDesign is installed.)
Using the Missing Fonts Loader Plug-in
This plug-in has an activation option: automatic (recommended) or manual.
Automatic Activation
The Missing Fonts Loader Plug-in loads missing fonts automatically when you open an Adobe InDesign document.
The plug-in searches for fonts in font groups defined in FontExpert. If a missing font is not found in the FontExpert
Groups view, it will not be activated, and the font will be marked by InDesign as a missing font (for the current
document).
3
Missing Fonts Loader Plug-In for Adobe InDesign CS4
In the picture below, the Missing Fonts Loader window shows an empty list of missing fonts for the current
document, because all fonts were activated automatically:
4
Missing Fonts Loader Plug-In for Adobe InDesign CS4
When InDesign opens the document, it may still mark fonts as missing, even though they were actually activated
by the plug-in during the opening of the document. In this case, you may be required to reopen document to let
InDesign know that all missing fonts are now activated.
The font information xml file helps solve this problem. It is recommended to select the Use font information xml
files option. Every time you save the .indd document, the Missing Fonts Loader plug-in will create a small xml file.
This xml file will include the list of fonts used in the corresponding .indd document. When this xml file is present,
the plugin can activate fonts just before the InDesign actually opens the document and searches it for missing
fonts. (You will find the xml file near the Adobe InDesign .indd document on your computer.)
Manual Activation
When the Activate Missing Fonts Automatically checkbox is cleared, the plug-in
does not activate missing fonts when you open the document. You can open the plug-in
window and activate fonts manually.
The Missing Fonts Loader window shows the list of missing fonts in current document:
5
Missing Fonts Loader Plug-In for Adobe InDesign CS4
Click the Activate All button to activate missing fonts.
Important Note
Unfortunately, when missing fonts are activated manually, you are usually required to close the InDesign
document and open it again to let the document "know" that new fonts became available. This is the
disadvantage of manual activation.
6
Missing Fonts Loader Plug-In for Adobe InDesign CS4
Technical Support
Please be sure to enter a correct e-mail address if you wish to receive a reply to your question or suggestion.
Your e-mail address will not be used in any automated subscriptions.
WE REPLY TO ALL CONTACT MESSAGES SENT TO US USING THE SUPPORT FORM OR VIA E-MAIL.
WE GUARANTEE SENDING A HUMAN-CREATED REPLY, NOT AUTOMATED.
Usually we reply within 8 hours, in many cases within 1 hour. The actual amount of time depends on your time
zone. If you didn't receive a reply from us, please make sure you entered a correct e-mail address on the form and
your Internet service provider isn’t using any anti-spam filters that may block messages with embedded
hyperlinks or file attachments.
Support Form on the Proxima Software Web site:
http://www.ProximaSoftware.com/contact.php
E-mail:
[email protected]

Missing Fonts Error

A lot of people post questions or frustrations about missing font errors in FrameMaker. FrameMaker reports missing fonts because it can be a big expensive deal if you miss the mistake when going to press.

Fixing the Missing Fonts Error This information is courtesy of Tim Murray. Check out his site: <a target="wander" href="http://www.techknowledgecorp.com">http://www.techknowledgecorp.com</a> and the Frame-specific help at <a target="wander" href="http://www.techknowledgecorp.com/help">http://www.techknowledgecorp.com/help</a>. The Problem <ul><li>You open a Frame file and the console reports that a font was not found, so another was substituted.</li> <li>You cannot generate a book because Frame tell you it can't properly open all the files.</li></ul> Load the font This is the obvious fix. "Don't care" solution In this solution, you are positive you never used the font, but even if you did, the substitution FrameMaker provides would be okay anyway. <ol><li>Close the file.</li> <li>Turn off the "Remember Missing Font Names" preference.</li> <li>Open the file (you will get the error again) and save. </li> <li>The next time you open the file, the message will be gone.</li></ol> "Programmed" solution Here you want to substitute the missing font for one that is different than the choice FrameMaker provides. <ol><li>Turn off the "Remember Missing Font Names" preference</li> <li>Exit FrameMaker.</li> <li>In a text editor (notepad.exe), open the maker.ini file.</li> <li>Edit the ini line "DefaultFamily=". In most cases it is Times New Roman, Times, Tms Rmn. Insert the font of choice at the front. For example:</li> DefaultFamily=NewCenturySchlbk, Times, Times New Roman, Tms Rmn You don't have to have anything after the first item, but it doesn't hurt. <li>Remove the changed font from your system either by turning it off in ATM or removing it from your Fonts folder.</li> <li>Add the new font. </li> <li>Open the FrameMaker file. FrameMaker's console should report that your original font is missing and the new font was substituted.</li> <li>Save the file. The change is done.</li></ol> When Font Errors Interfere with Books and Updates You may be in a situation where you need to do an update, but in order to do so you would have to override the fonts . . . but you would rather not, because doing so would mess up the design. The solution is to open the file or files that are missing the fonts; if the affected files are open during the generate, you won't get the "cannot open file" error message. If you need to open all the files of a book, you do NOT have to run down the book list and open each one separately. Instead, you can simply Shift+click or Ctrl+click the files you want (and a Ctrl+A, in Windows, selects the whole list). In FM6 and earlier, press Enter. In FM7, right-click > Open. Each file will open (but, of course, you may have to acknowledge missing font messages). Also, you can open all files in the book at once this way: <ol><li>Make the book file active in FrameMaker--so it is in the foreground.</li> <li>Shift+click the File menu selection, in the menu bar.</li> <li>Shift+clicking File gives you book-level options in the File menu, including "Open All Files in Book."</li></ol> Thanks again to Tim for the information used here. (Remember to post suggestions or corrections in the FAQ Suggestions and Corrections thread.)

Missing font in iWeb template

I'm new to iWeb but am not new to Apple's. I've been experimenting with the Doodle template and whenever I launch iWeb an error message comes down saying that there is a Missing Font which is Handwriting-Dakota. The only option it gives me to resolve this is to find this font and put it in the font folder. My questions are these:
1. Where can I go to download and replace this font because apparently I've deleted it or something?
OR 2. Where do I need to get to inside iWeb to maybe replace the default font for that template?
Please help! I'm driving myself nuts.

I think it's still worth trying to figure out why the font disappeared in the first place. I've seen several posts on missing fonts but no one has yet to determine why they go missing. (at least, not in the threads I've read

Upgraded to CC from CS5.5 now all Illustrator templates have a 'missing font' (myraid-Italic). How can I fix this without replacing the font?

Replacing the font is not an option. This would mean resaving thousands of company files.
Also, none of the templates use Myraid Italic. They were created with Myraid Roman.
This has never been an issue when upgrading to other versions of Illustrator.
Every file I open will pop-up with the missing font notice; this is very annoying when checking numerous files (I have to click okay everytime for the file to load).

I actually have a fairly simple solution to this for Windows 7. Don't mess with your registry or delete other fonts. Go into c:/windows/fonts. Check to see that you have the set of fonts "Segoe UI". Inside this set are 6 Segoe fonts:
Regular (segoeui)
Regular Italic (segoeuii)
Bold (segoeuib)
Bold Italic (segoeuiz)
Semi Bold (seguisb)
Light (segoeuil)
You may not have them arranged in a set, but just check that you have all of them.
Make sure programs (i.e iTunes) are closed.
If you don't have the fonts, find them on the internet, ask a friend to copy and paste them, send them to you etc. They are easy and free to get. Download them to your desktop. Right click each one and "Install".
If you already have them in your fonts folder (my problem) do this: COPY (not cut) them from your c:/windows/fonts folder to your desktop. Close windows explorer. From your desktop, right click each one and "Install". You will get a message that they are already installed and do you want to install a newer version or some such. Say "Yes". They will get re-installed.
Open iTunes and you should have all your text back!
*Based on a sample of one - hopefully it works for you.

IWorks asking for certain missing fonts

Hi All,
I was wondering if anybody else was experiencing this issue too: Every time I open a template on any iWork '08 program I get a message saying that "some warnings occurred" and when I review the warnings it's always about some missing fonts. One of the fonts that it looks for is Helvetica Neue. I never had this font installed as far as I know. Is it supposed to be on my system somewhere? I'm running OS 10.4.10 on a G5 PowerPC. I also use Linotype FontExplorer X to manage fonts on my system. I used to use Suitcase Fusion but it was giving me too many issues.
Other missing fonts are for example:
ArialMT
ArialNarrow
ArialNarrow-Italic
Arial-Black
AmericanTypewriter
Baskerville
Baskerville-Italic
Copperplate
Futura-Medium
Futura-MediumItalic
GillSans
GillSans-Bold
HelveticaNeue
HelveticaNeue-Italic
HelveticaNeue-Bold
HoeflerText-Italic
HoeflerText-Regular
MarkerFelt-Thin
So basically what I am asking is this:
1. Are the missing fonts supposed to be installed on my Mac somewhere? Were they shipped with OS X?
2. How can I replace them without having to buy them? The Helvetica Neue family is very expensive!
3. Are these fonts essential to the template's formatting, etc?
4. Can I replace them with other fonts?
5. How can I stop the warning message from popping up every time I use a template?
Thank you for any help in advance,
jenzvan

Yes, I get these messages often, as well. Only I see them most often in Numbers. I would like to be able to disable these silly notices, but there aren't any preference settings to disable much, if anything.

I bought and installed many fonts for a project and one font in particular which is showing up in the font list on a new file, is missing when I open an existing file containing that font. I can't understand why that's happening and the font is Centrale S

Hi
I am encountering a missing font error on Adobe Illustrator for a font that I recently bought - Centrale Sans Bold. This font is clearly installed in the system's font folder and is also showing in the font list on Adobe Illustrator. But when I open an existing file containing this font it is giving the error "The document uses fonts or characters which are not available or are in a different format than originally specified".
We have also bought Centrale Sans regular from a different website as we couldn't find both on one, could that be clashing somehow?
Also the existing file was created on MAC plattform and we are using a windows plattform to open it. That to me doesn't seem like an issue as all other files are opening up fine and I have bought around 47 fonts and only this font seems to be not working. I have also written to the website I bought it from but I have also bought around 20-25 fonts from them and all the other fonts are working fine too. Maybe its an illustrator related problem?
Please help!!!!!!

There is one way its getting fixed. Once I update my Adobe Illustrator CC to Adobe Illustrator CC 2014 it is further allowing me to go into the system folder and allocate the font to the file so that it can replace it. My only concern now is that our MAC partners who will receive these files back from us have Adobe CS6. We will down save it to CS6 but I hope they won't experience any font issues because of us using CC 2014? Any light you can shed on this?

Is there a way to automate missing fonts in thousands of small pdf's for print

Greetings,
We are receiving thousands of small PDF's from several differnet locations with missing fonts. The controller on the printer is having to perform
font substitution on each page. This causes the printer to cycle and not run at rated speed.
I am wondering is there a way to have these files insert all the missing fonts before they reah the controller on the printer?
Thank you so much.
HDRDR

There are tools out in the market which should be able to embed and fix missing fonts. You might look at something like PitStop server.
If no commercial product is out there, you might talk to the developers of such tools for a customization.
Hope this can help.
Max Wyss.

Missing Font for templates

Similar Messages

Maybe you are looking for