Missing font picks up Myriad Pro when exporting to PDF

When I export an InDesign CS2 layout to PDF from a Windows PC that is missing one or more of the original layout's fonts, those missing fonts are being substituted with Myriad Pro. Does anyone know why it is picking up Myriad Pro rather than Adobe MM Serif/Sans fonts? Is it possible to choose an alternative substitute font instead?
What's actually happening is that a fairly dimwitted server is producing the PDFs automatically at the end of a publishing system I'm working with. If a naughty editorial person decides to use a font that isn't on the approved list, the server substitutes the missing font. This wouldn't be a problem if it applied Adobe's MM substitute fonts because we'd be able to preflight it. However, since Myriad Pro gets embedded in the PDF in place of the missing font, our preflight check says everything is OK. Nor can I exclude Myriad Pro from the preflight check because that's one of our approved fonts.
Any help would be gratefully accepted.
Alistair Dabbs

The image is not overlapping the text.
It was orginally overlapping a jpg but I moved it and the problem persisted.
(Apple support system made me resubscribe to respond, hence the slightly different name)

Similar Messages

Barcode fonts 128 and 39 "shrink" when exported to PDF

Hello,
Crystal reports recommends using either IDAutomation or Azalea barcode fonts for reports.
We are using IDAutomation. Both the 128 and the 39 encoded fonts work fine when
printing. However when we export to a PDF file the fonts "shrink" down to a tiny box and
are both un-scannable and nearly invisible.
At this point in time, does anyone know of any fonts that can be used in v.XI which can
be exported to PDF and be scannable? We are using the RDC and so are stuck with v.XI.
Is the highest service pack for R1 (I believe it is SP4) of any help with this issue?
If you know if answers to the above are negative please respond anyway.
Also, I you know of any threads which deal with the "incredible shrinking font" issue,
please mention them.
Thank you,
Joe

HI, Joe;
The previous post was for the incorrect verison of Crystal Reports from what you are using.
Have a look at this Note referring to Crystal Reports XI R1:
[ForceLargerFonts|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313338333733353333%7D.do|Note 1218753]
Regards,
Jonathan

What is the problem with fonts changing to myriad pro? Is this problem ever going to be resolved? Its driving me mad!

What is the problem with fonts changing to myriad pro? Is this problem ever going to be resolved? Its driving me mad!

Browser Dog, Amy,
The default font remains Myriad Pro until you change it, either in the RGB/CMYK Startup files or in the preferences, options depending on versions.
Concerning missing font names, I believe this may solve it:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:

Distorted font when exporting to pdf

I'm using Tahoma font and trying to bold certain sections. The bolded portions look odd (strange little boxes and fill is not quite solid) when exported to pdf and viewed digitally, The printed document is just fine however. The bolded portion, when viewing with acrobat pro, or adobe reader is just not crisp. I had adjusted the stroke setting of the bolded portions and thought this might be the problem, so I have tried bolding using both the regular font "Tahoma bold" and also using "Tahoma Regular" and increasing the stroke. The effect is the same.
As the document will be both printed and viewed online, I want to make sure that I am sending something that will be viewed as crisply and professionally as possible, no matter how it is viewed.
Any ideas what my problem might be?

I wondered if that was my problem so I changed everything back to regular "tahoma bold' but I still have the problem. I'll attach a screen capture

When exporting to PDF fonts are replaced

I have had this happen several times when exporting to PDF from CS6 with no font errors, all the fonts have been changed in the PDF to another font. Not the default either, but just a different font altogether.
Has anyone heard of this or experienced this?

It is pretty easy to determine the fonts are wrong by visual inspection followed by the text edit tool in Acrobat X to confirm what font it is. The original fonts on this particular file were Gotham and they were replaced by Helvetica and our default missing font is Courier. I have found numerous threads with the same or similar problem dating back to September 2014 where they were blaming Indesign CC for the problem, with another person replying they had the same issue with CS6. Some of the advice given to them was to load the fonts locally rather than across a network to a server. The problem is not repeatable that is to say when you notice the issue with your PDF you open the file and export it again and the fonts are now correct with no changes to the file or the way you loaded the fonts. What is alarming is this is intermittent with no font warning while exporting or any further font warnings if the PDF is Normalized through Kodak Prinergy. It is like the postscript code is being written with a replacement font.
I have enclosed the thread I found and we are going to load fonts locally to see if this helps, if you have any other advice it would be greatly appreciated.
Ted
http://

Background missing when export to PDF CS5.5

Hi,
I have seen some similar posts (all non-current) to the one I am writing however, my issues are not solved by the solutions posted in previous discussions.
My problem is that when I am exporting an IND file to PDF, when I open the PDF all of my background images are missing. In most examples this is a full page black box. But since testing this problem I have encountered the same issue with any colour and some photographs.
I am working in CS5.5, with all software up to date (version 7.5.3)
I have tested this in new documents and old documents that previously would have exported the background.
These items are not on master pages. I have tested this on brand spankin new pages and existing ones (with and without any elements on master pages)
I have tested the boxes with and without transparency.
There is no issue with overprint or the overprint preview check box.
I have tried saving the file as an .IDML and reopening to see if it will 'debug' the file. I have exported the PDF as every kind of option. I have restarted the computer and the program several times. I have checked for new updates.
The only way that I have 'cracked' this issue so far is to break the one large background image into at least 3 overlapping solid boxes. It seems that you cant have any box overlap more than 2 page boundaries.
Is anyone else having this problem or any other advice on what to try.
Thank you

Hi Eugene,
The document in question is 1) not using master pages and 2) not using spreads. Its a single page A4 document.
Hi Peter,
Sorry I am not trying to span two pages. My comment was that the graphic box seems to glitch when it touches more than 2 boundaries of the page ie left right top bottom.
I am using the full creative suite CS5.5, no hacks, no substitute programs.
I have attached a few screen captures.
Sample file in indesign:
Screen capture when exported to PDF:
split the background box into 2 (i have used 2 blacks so you can see the boundary). Export to PDF:
Second example - black background with photo over top. In indesign:
Exported to PDF:

Problem w/Optima font when exported to pdf from indesign

I'm having a problem exporting files to pdf format with the optima font. It looks okay in indesign (preflight reports font status as okay)
but when I open pdf it is misformatted. I changed it to another font but would really like to use optima. Has anyone else run into this problem and how did you solve it?
Thanks

Thanks Michael,
New to forums and having a little trouble finding my way around. I reposted
on ID forum Optima file is from Adobe and is ps file.
Thanks for your help.

Objects missing when exporting to PDF, but show up when printing to PDF

Hi - I'm working with someone, both of us in InDesign CS4, and she has some documents that cause a few random objects to just go missing when exported to PDF (same on my computer). But when printing to PDF, they show up fine. They also show up fine if we recreate each individual object, but that can end up being a lot of work. She prefers to export to PDF because of quality. I'm drawing a blank on this one!
The attached file shows the issue. The green blocks just don't want to show up when exporting.

Peter -
The links are just the PDFs of the black and white portions and don't really matter too much since they show up fine when exporting or printing to PDF. Our main concern is the green blocks, which are indeed the green areas of the plan you pointed out. They are actually separate objects created directly within InDesign that can be moved and adjusted.
I just updated to 6.0.4 and that didn't help. I wonder if this may be a variant of the bugs I was reading about with master pages and certain things not showing up when creating PDFs or printing (even though none of these things are on the master page)?
Thanks

Error in character spacing when exporting to pdf from word 07

I am having trouble with exporting to pdf from MS Word 07. The character spacing throughout the document is wacky. This also happens when exporting to pdf from a GIS program.
Any help?

I use the term export because that is how it is done in the GIS software that I use - ArcMap 10.
In MS Word I access Adobe Acrobat Pro 9 through the print menu. I am using Windows 7.
I do not always have this trouble, but it started yesterday on a 30 page word doc and then after that, it started on an ArcMap doc.
As for embedding fonts, when I check the Word doc as you suggested, i see many different fonts listed. Some are embedded, some embedded subset, some are not embedded at all. I use styles to manage font types and heading levels. There is nothing fancy about it - all Times New Roman.

Format Changes when Exporting to PDF

I'm using Crystal 12.0 and have an issue very similar to these threads listed below.
While viewing a report on my development machine, all is fine. I can export to PDF and the formatting is OK.
However, when the report is exported to PDF on the web server, the spacing between some of the text is off. The spacing is used for a CrossTab cell in a "Display String" that I changed using "Format Field." All that's supposed to happen here is several spaces are used to move the text under the proper column.
When exporting to PDF on the web, the text moves over to the left like it's missing some of the spaces. I wondering if the below threads apply to Crystal 12.0.
Thread:1220516 and
Format Changes when Exporting to PDF
Thanks kindly for your assistance,
-Marty

I'm having a very similar problem using Crystal Reports for Visual Studio 2008. Everything is perfect when running in VS 2008, it takes the report and exports it to PDF format via VB code. The PDF file is idenitcal to the report. However, when run on the server the one page report (when exported to PDF) gets chopped into ten 4x4 chunks. So the PDF file is 10 pages....its like puzzle pieces of the original.
I've drawn a bunch of lines on the report to look like boxes - perhaps this is causing issues? The font on the report is Arial.
The server has the 10_5 runtime installed and it is set to the same default printer as the development PC. I have been stuck on this for days and would really appreciate any advice you may have.
Thanks!
Edited by: WanderingEye on Sep 18, 2009 4:54 PM

Fontissue when Exporting to PDF CS5

Commented on linked thread and advised to start new tread.
http://forums.adobe.com/thread/651071?tstart=0
When Exporting to PDF from ID CS5 I have seen font displace and disappear.
Have done some tests since my post on linked tread, and find out, using PDF/X_1a:2001 (PDF version 1.3), it works fine. But when I use PDF version 1.4 and above fonts randomly dissappears. See first picture below.
OK, for me as this is only going to print, but with 1.3 we loose hyperlink and bookmarks if used in other media.
Have seen font displace when Exporting to PDF, (Second picture) and in this case there was no way to get it right with options mentioned above. Only way it came out right was to outline the font...and also PS - Distiller worked fine.
I have found my workarounds, but I would really like to trust the Export to PDF in the future as that is the way Adobe advice us to use.
Workaround 1. Use PDF version 1.3
Workaround 2.
In (application folder) Adobe Indesign CS5 - Presets
Make a new folder - PPDs
Put (ADPDF8.PPD or ADPDF9.PPD) into this folder. (I had a backup of these files, cant find them online...!?!?)
Makes it possible to print PS from InDesign and use Distiller.
Mac - 10.6.X - ID Int. English

@Clement,
We've determined the root case of the text shifts you're seeing in at least one of the cases. In the Animals_Me_Spreads.indd file is having text drop out due to soft returns at the ends of Text on Path objects. We are investigating what would be necessary to fix it, and would hope that we can address it in a future update or release. In the meantime, you should be able to elimiate the problems by eliminating the use of soft returns on Text on Path objects, for example, replace them with hard returns, or limit one story to a path and make the second path contain a separate story.
Sincerely,
Matthew

Is it possible to embed video in keynote presentation when exporting to .pdf?

Is it possible to embed video in keynote presentation when exporting to .pdf?

You can place the video in Keynote but it will be exported as a still.Adobe Acrobat Pro is needed to embed video in a PDF page.

Lines when exporting to PDF (in print)

Hello,
I have an indesign document with several transparent layers (light grey layers).
They all show fine on screen, and print perfect here. But when sending it to the printshop I ran into some white hairlines.
When exporting to PDF X/1a I get loads (transparency flattened), when exporting to PDF X/4 I do get a slight edge (in white) where the gradient transparency ends.
I do believe this issue is at the printer end, but 'yes we use PDF' was the only input I got from them.
Again, they print just fine on my home printer, but don't with the 'pro' printing company my company uses :s
Any advice, besides exporting to tiffs on those pages?
Thanks!

I could paste the graphic with fade in photoshop and match the background.
The think is, the front cover for example has more transparency and layers and prints just fine.
Does stitching occur more on lighter objects and backgrounds?
I obviously can't trust the printer we're using to handle the flattening so we'll have to use a workaround.
Thanks

Images downsized and converted when exporting to PDF

I have Pagemaker 7.0.1 installed on Virtual XP so that I can help out a family member.
Pagemaker's embedded Acrobat 4 was not working properly so I installed my Acrobat 9.0 on Virtual XP. This unfortunately has not solved the problem, which is:
My images are greyscale and 300 ppi when imported into Pagemaker. When exported to PDF using Acrobat 9.0, the images are being converted to CMYK and exported at about 50% of the actual size. Interestingly, those images that are only at 200 ppi are converted but not downsampled.
This is happening no matter how I fiddle with the settings. Happens to both jpegs and tiffs.
I found an old thread on another forum where this problem occurred but a solution was not found or posted.
Any ideas?
Michelle

This reply is a series of comments and suggestions rather than a definitive answer.
1. Your set up is less than perfect, if not unstable, and will be prone to all sorts of bizarre behaviours.
2. Never copy/paste a graphic or table into PageMaker. Always use the Place command. The only "exception" would be that you can copy and paste a properly Placed graphic from within your PageMaker document.
When placing images in a PageMaker file, the following message appears: “The graphic in the linked file would occupy xxxxxxx bytes in the publication. Include the complete copy in the publication anyway?” The correct answer to this question is always "NO".
(You can permanently avoid this popup in future docs by unchecking "store copy in publication" under Element -> Link Options with no publication open. You can do the same to avoid further prompts in pre-existing documents.)
3. Try updating PM to Ver 7.0.1a which had a better Export… AdobePDF…macro. http://www.adobe.com/support/downloads/product.jsp?product=34&platform=Windows
4. In PageMaker’s Print dialogue, click on the Options button, and check "Write PostScript to File." Select the "Normal" radio button. Set both Type 1 and TrueType fonts to download. As always, set the Send TIF/Images option to Normal and NOT Optimized. Make other settings elsewhere in the print dialog as desired, such as "paper" size, crop marks, separations, etc.
5. With your non-standard setup, try the two stage print then distill process. Create a PS file using a postscript printer file, then load Distiller and convert the PS file to PDF. Note: if you have hyperlinks in your PMD file, they will not appear in your PDF and need to be re-created using Acrobat.
6. It's time to leave PM and move on to InDesign - see it as PM Ver 13.
7. Aternatively, use PM7 on a contemporary Win2K PC. http://bigjohnd.org.uk/PageMakerExportPDF/index.htm

Indesign ME CS6: Punctuation marks change direction when exporting to PDF

When exporting to PDF (for press) - some punctuation marks (! & ") beahve as if they're "left -> right" (in the PDF only!) instead of "right->left" - as they appear in the open file.

If I understand this correctly, then before you opened a PC-sourced INDD, this never happened? And now it happens with all new files? Was that PC-sourced InDesign file from an English non-ME install of ID?
If doing so is not a big deal for you, I would almost want to suggest the "Nuke it from orbit, it's the only way to be sure" approach coined by Sigourney Weaver's character in Aliens. I.e. something happened to your ME install by simply opening up a non-ME file, and clearing prefs didn't fix it, so I'd be ready to uninstall, run the Adobe Clean tool, and reinstall.
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
I hope that I'm wrong, and that there is some kind of preference that can be tweaked to get this to work correctly. I'd start by removing Font Explorer X entirely. It's also worth trying to make a new user in OS X and seeing if a fresh user experiences the same issue.

Missing font picks up Myriad Pro when exporting to PDF

Similar Messages

Maybe you are looking for