Missing font problem

Fireworks is not reflecting enabled and disabled fonts- There
are fonts that I cannot use in fireworks (even though they are
active, and available in Photoshop), and makes available fonts I
have disabled.
I've tried changing permissions, deleting prefs, font caches-
Nothing seems to work.

I've tried using three browsers (Safari, Firefox and Chrome) and the Flash Player acts the same in all three, so the problem is not the browser. I'm on a new MacBook Pro running 10.6.3.

Similar Messages

Missing fonts warning when opening a Keynote file

I'm using Keynote 2.0.2 on a Mini Mac. Having searched for an answer to the ubiquitous "Missing Font" problem when opening a Keynote file, I was wondering if upgrading to the latest version would solve this problem. Unless it does, we would have to think twice about upgrading the software. A lot of users seem to have the problem with version 3 too. Does anyone have a solution to this? The presentation runs perfectly well, but the warning message is annoying and doesn't look nice when presenting to clients. HELP!
1.42 GHz Mac Mini PPC G4 Mac OS X (10.4.8) 1GB DDR SDRAM

I've experience this same problem multiple times. There is a way to get rid of the troublesome font, thereby getting rid of the annoying message. I may be glossing over a step or two, but it goes something like this:
(1) In the Finder, right click on the Keynote file and select "Show Package Contents"
(2)Locate the index.apxl.gz file and open it. The file exands -- then open the index.apxl file with Textedit (or Word). Throw away the gz file.
(3) Do a search and replace -- find all instances of the troublesome font name and replace it with a non-troublesome font name, such as GillSans
(4) Close the text file.
Opening the Keynote file should now proceed normally. Note: Better practice this on a dummy file until you are sure everything works. I imagine that if you muck up the index file that the orignial Keynote file might be toast!
Rob
Black Macbook Mac OS X (10.4.7)

Embed fonts problem

hi there
i need to embed quite a few fonts in my swf file - they are
all Trebuchet MS, but of different sizes, and some with bold on
i created a new font in the library for each font 'type', and
also set the linkage for ActionScript (load first frame)
in my actionscript code i create the text fields, but the
fonts for only two types seem to be loading (ie i see the text) -
none of the others load - something weird - i quit Flash, came in
again, and this time two different font types loaded, and the
original two (and all the rest) failed - weird huh? i definately
use the correct embedded font names, and i always set the
'embedFonts' attribute of the text fields to true, AND the font
size and bold is set correctly to match the embedded font required
note - i have NO text fields in on/off the stage created at
author time - i create everything dynamically at runtime using
ActionScript....
so, has anybody had any issues with loading embedded fonts???
please help me, i have a HUGE deadline this week!!!
tia
bhu

quote:
Originally posted by:
kglad
do all your textformat objects have unique names? are you
using any components in the problem swf?
'textformat' objects? do you mean 'font objects' (as placed
in the library)? if so, then yes, they all have unique names...
actually, i think i have just discovered what is going on -
when you create a new font for the library, you specify a point
size - now, i thought this meant that for each point size of that
font i needed in my swf that i would have to create a separate font
entry in the library - it appears that the font size is
meaningless?!? i say this because in my code i can reference a font
symbol, but set the size to anything i want, and it is sized
correctly!! my missing fonts problem appears to be that flash
doesn;t load subsequent font symbols of the same type face, even if
they are differnt point sizes....
does that make sense?

N78 font problem

hello all..i'm new to this forum.. im from indonesia and i bought my n78 about a year ago.
it was a very nice and multifunction phone. until one day i experience the font problem with my device.
it started just when i upgraded my firmware from 12.046 to 20.149. everything looks nice, until i saw my interface font for 'dot' (.) has changed into 'square'. it's just like 'missing font' problem in a PC if i can say. i dont have any idea how that can happen. i'm clueless and hoping for a better luck in the next firmware release.
then the time has come.. i upgraded my firmware from 20.149 to 21.002. but the problem is still there..arrghh.
so, can anyone help me, i'd really like to see her operate normally...
thanks for your help..
Solved!
Go to Solution.

wow it works..!
after acrobating with my finger to reset my phone, the decimal poin then goes back to normal. thanks guys..
the rest to do is reinstall my softwares one by one all over again.hehe..
but when i wanted to restore my backup file of messages/calendar/contacts(etc) from pc, the pc-suite told me i cannot restore them bcoz "the backup file doesn't contain anything (or somewhat else i forget)"
hmmmhh.there goes my messages
any clues?
thank you

How do I find where a missing font was used?

For an example, download the Property Owner Application form from http://www.atlantahousing.org/housingchoice/landlords/index.cfm?Fuseaction=forms
When opened in LiveCycle Designer, I get a message that Kozuka Gothic Pro-VI M (Regular) is missing. I don't see a way of searching for a font in LiveCycle, so I opened it up in Illustrator, thinking I would get a missing font message ... but I didn't. And when opened in regular Acrobat and looking at the Properties > Fonts list, it doesn't appear there either.
It's not causing any problem that I can see, but I'd like to get rid of it. Or maybe this is a font used by the application for some special symbol? Anyone khow to find it, or what's going on?

Hi,
I haven't downloaded the form, but if you can open the form in LC Designer then go to the XML Source tab and do a search there for "Kozu". If the font is used, it will definetly show up in the XML Source. Note that while in XML Source you will be able to look up and down and identify the object that contains the font.
If you find it there, amend it for something else like Myriad Pro and see what happens.
Good luck,
Niall

Missing fonts in CS4 – how to install?

Hi all,
Apologies for asking a question that I've seen posted and answered, but I'm wondering if there is a simpler solution than the plug-in suggested.
I have lost a few of the fonts I regularly use. They appear in Font Book and are enabled, but they are not available in InDesign. The missing fonts are available to me in other programs (e.g Word) so they are definitely on the system.
I was given advice to check in Home > Library > Application Support > Adobe > InDesign > Fonts, but there is no folder called "InDesign" within the Adobe folder of that path, so I don't know if that was good advice.
Of course (always the way, isn't it?) I've noticed this problem one week out from my deadline to the printer, so would really appreciate resolving it quickly.
Thank you in advance,
Andrew

Well, if your goal is to make the problem go away without
understanding it, thus reducing the liklihood you'll understand the
cause and prevent it from recurring in the future...
"Sometimes they get sleepy" is an attitude that really bothers me at a
deep level. Programs shouldn't break. And when they do, we should make
the effort to understand why they do. And report those problems back
to the manufacturers, who should be given the opportunity to fix
them. Even if we think they won't.
Programs break for reasons. Sometimes complicated and tricky
reasons. Sometimes reasons we can't actually figure out. But sometimes
reasons that we can. And we need to take the effort to figure out
why. Or at least try to a reasonable effort.
It is our moral duty. Otherwise the programmers who author the
software will have no opportunity to fix the problems, and thousands
of user across this green earth will be forced to deal with the same
problems we deal with regularly, for years and years, all because no
one was willing to take the minimal effort to figure out what was
broken and why.
Don't lie down and say "oh, it just broken again, I accept that i have
to jump through this hoop to fix it periodically." That's just not the
way it should work, and it doesn't have to be that way.

Photoshop CC: Missing Fonts on Startup, only a few fonts are displayed as replacement options

I have a Photoshop document which uses some Fonts that I don't have on my Windows PC. When I open the document, I get a Dialog Box called "Missing Fonts", which states:
"Some fonts used in this document are missing. You can sync matching fonts from Typekit, or replace missing fonts with a default or different font used in this document"
This text suggests that I can only replace missing fonts with other fonts already being used in this document. However, I want to replace a missing font with a font that is not yet used in this document. Why can I only replace a missing font with another font already used in the document? For example, I want to replace "Helvetica Neue" with "Liberation Sans", however Liberation Sans is not offered in the Dropdown box, even though it is installed, as it is not yet used in the document. What is the point of only allowing to replace a missing font with a font that is already used in the document, and not with any font installed on the system??
Thanks,
best regards,
Chris

I'm a windows user so I do not know the Adobe Photoshop environment on the Mac or the versions of Mac OS. The only suggestion I could make would then be try using Adobe Cleaner to clean off Photoshop then install Photoshop Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

How to Change the (Missing) Font in Endnotes

Hello and thanks (again) in advance,
My preflight report showed that I have 170 errors: they are all missing fonts in the numbers of the endnotes.
Some of the Endnotes are in the Times New Roman Font, but for some reason, 170 endnotes are not. This is a font problem with the "number" part of the endnotes -- the text in the endnotes is all Times New Roman.
What I would like to do is to change the font from the missing one (Cambria Regular) to Times New Roman.
The endnotes were imported when I placed this MS-Word document into InDesign.
Here's what I tried, that failed:
1. Fix the font problem when I opened the file, and InDesign showed missing fonts. (This fixed the fonts -- changed them from Cambria to Times New Roman) for all the text, but did not touch the numbers in the endnotes.
2. Search and Replace for the number of the Endnote -- the numbers were ignored by the search.
3. Search and Replace for the number of the Endnote, with the "Include Footnotes" button highlighted
4. Search and Replace for Cambia Regular text (although I might not have done that correctly.) ... I left the "Find What" box blank, and in the "Find Format" box I selected Cambria Regular. ... Nothing was found.
5. I deleted one of the numbers -- endnote 202 -- "by hand", and then retyped the number. This did change the font, but it had the bad effect of ruining the endnote numbering system: it made the next endnote (number 203) below it into number "1" and the endnote after that "2"
Also, I wondered if it "broke" the entire endnote system -- If there is some connection between the number that I deleted, and the corresponding superscript number in the text itself.
Here (below) is a screen shot of my pre-flight report.
You can see that some of the numbers in the endnotes, (for example: 200 and 202) are in the correct font; but endnote numbers 201, 203, 204 are not in Times New Roman.
I am stuck ... Suggestions are welcome and appreciated !
ZtG

Since ID doesn't really support endnotes, I suspect they were imported as a numbered list, particulary considering the uselectablility and find/change sympotoms you describe. Bullets and numbers in lists aren't "real" characters that can selected.
Find font should probably have done the trick if the numbers were assigned a style in the list definition AND you checked the update styles when changing all box in Find Font, so I'm also going to guess that you either didn't check the box or there is no style assigned to the numbers (and I suppose it's possible they aren't really a list).
The best solution would be, I think, to first verify that they the endnotes are a list, and to assign a character style to the numbers.

Missing Fonts in Illustrator CS4

I have been having an issue with the "missing font"
My problem is that Illustrator recognizes the fonts sometimes and not other times. I have had no problems for the past week or so and I just restarted my computer and now a number of fonts that worked fine suddenly are replaced with the "missing font" default.
The fonts I'm currently concerned with are all in the default LaTeX family (i.e. cmr10, cmmi10, cmbx10, etc...) I have all of them installed on my computer and they work fine in every other application.
Does anyone have any idea what is going on or how I can solve this problem? Why does illustrator "lose" them and how do I get them back? !!
Thanks!

Thanks for the link. I'm actually using Windows 7 and in the mean time my illustrator "found" the fonts again (still can't figure out why). I don't know how well the solutions for the Mac OS will work but I'll take a look. If anyone else comes up with an answer I'd love to hear it!
Thanks!

Missing fonts in Windows InDesign CC'14 vs OSX

We are a school with about 500 Windows 7 machines. We also have an iMac suite (about 25 strong). We have a Creative Cloud subscription and have deployed it to all of our computer suites and our iMac suite. CC 2014 versions of the relevant products have all been pushed out, so there should be parity between the two platforms.
Our problem is that our Windows clients are outright missing 90% of the TrueType fonts that are available on the OSX (Mavericks) clients. Most of the Media classes are taken in the iMac suite, and therefore the majority of their content has been created in there, but two or three times per week the classes rotate to a Windows suite. Some students are encountering issues where fonts are missing after opening their INDDs in InDesign for Windows.
I discovered that InDesign for OSX has vastly more fonts than on its Windows counterpart, specifically of the TrueType variety. About 90% of the TrueType fonts on Windows were missing. As far as I could tell, all of the OpenType fonts matched.
Students get the follow dialogue when they launch InDesign with a missing font:
So yeah, that's my issue. I've literally spent all afternoon researching this issue to no avail and am pretty much stumped at this point.
Any help and advice will be more than appreciated!
Thanks for reading.

Early on in the life of Mac OS X (which has been around for over 10 years in multiple versions—we're now at 10.10), Apple advertised how many beautiful fonts were available with Mac OS X. And, it's true, they do install a lot of TrueType fonts.
Microsoft provides much fewer. As far as I can tell, most of them are installed with you install Microsoft Office products.
It's just the way it is.
I guess you could show students a list of the fonts installed with Creative Cloud apps (Minion Pro, Myriad Pro, etc.). You could also teach them about downloading Typeset fonts (although they won't be able to carry those to another location which doesn't have a CC subscription).

Missing fonts in cs4

Hello All,
I have installed CS4 on my XP desktop after uninstalling CS2 completely and I am now having some font missings from the applictation.
Although the font name like "Arial Black" already exist on the PC but its not finding it. When I open an existing Indesign CS2 file( I am getting an error message saying few fonts are missing and then a find a font box coming up with missing font names marked with yellow !.
I dont know how to add these fonts back into the CS4.
Someone advised me to delete all "adobefnt*.LST" files but this did not work either for me.
Please can you advise how to do this?
Thanks
S

Fonts are never unloaded when installing software. In the case of Arial Black, go to Arial, and see if Black has been added to the Arial family (where you see Bold, Italic, etc.). As well, Adobe software will sometimes sort files differently than other applications, so look carefully though the list to see if the ones you are missing are sorted somewhere else.
Fonts are often loaded with software, and probably this has happened with CS4 (I am on CS3). You might have gotten new versions of some of your old fonts. This could cause the problems you are seeing in ID. I think you can just tell the files to update to the new versions, if this is the case.

Missing Font, But Font Isn't In the Document

Hello,
We're all using FrameMaker 10 on Windows 7.
My client and I are receiving the good old missing fonts error message, specifically:
The "ITC Stone Serif Std Medium Ital Italic" Font is not available.
It will be replaced by "Times New Roman Italic".
The "ITC Stone Sans Std Semibold" Font is not available.
It will be replaced by "Times New Roman".
First, the fonts are installed.
Second, Remember Missing Font Names is turned OFF. (Unchecked, cleared, etc.)
Third, the fonts are NOT in the document. I have saved the document as MIF. I have searched for the font names. Nothing. When I open the MIF file in FM, I don't get an error. But I save it as a .fm file, open it, and I receive the same error messages.
We don't use these fonts. We don't want them in our documents. I'm doing a massive clean up to get rid of old formats. About half of the files do not have any problems, but half do. I have tried everything:
- Generating a list of fonts. If the fonts are found, then I go in and manually apply the Default Para Font. Usually, doing this removes the font from the list of fonts. However, I still get the messages.
- Importing formats from a known good file.
- Editing the MIF, to the point of removing the entire paragraph, character, font, and table catalogs. (I started by deleting references to ITC Stone x, then went on to the more drastic measures.)
- Changing the default printer.
- Copying the text and pasting it into blank files based on known good files.
- I tried editing the maker.ini file to substitute fonts directly, but that didn't work. I may have been doing that wrong, though.
I've got over 10 years of FM experience, and I've never encountered a font problem that editing the MIF couldn't fix.
All of the documents came over from Frame 6. They're all in the same book.
We need to be able to work on the book file as an entity, without having to open the files that contain errors and leave them open.
Does anyone have any ideas?
Thank you very much!
~Robyn

I found the problem, but I'm not sure why it was a font problem to begin with:
Unresolved cross-references.
FM couldn't open all of the files in the book. Therefore, it couldn't update cross-references. It "thought" cross-references were unresolved.
I figured this out by deleting one page at a time from a Bad file. Then, I deleted one paragraph at a time from the Bad pages to determine that the cross-references were causing the problem.
I was cleaning up the book - deleting paragraph, character, cross-reference, table, and conditional text formats and master and reference pages. I then imported formats from a known Good file. The more files FM could open without errors, the fewer font errors I received. After I was able to generate/update the book, the font errors were gone.
Some of the font calls were on a reference page that was found only in select files. However, one would think that would show up in the MIF.
My best guess is that FM couldn't update the cross-reference formats without updating the cross-references, so it "thought" the text was still in the wrong font. That begs the question: Which came first, the unresolved cross-references or the missing fonts?
Of course, it doesn't explain why FM was complaining about a font that is installed.
Thank you everyone who took the time to answer. I'm sure this won't be the last time I run into this problem, and now I'll have a lot more knowledge for next time.
~Robyn

Missing Fonts in PDF

Hello everybody
I have a font problem somwhere in the chain Powerpoint->PDF->InDesign. When i Import the generated PDF, InDesign is reporting missing fonts in it. Now, there is a difference in which and where the fonts are missing (11 vs 31 errors) depending on which way i use to generate the PDF
a) via "publishing as PDF" from Powerpoint 2010
b) via "Print as" using the PDF printer
When checking the PDF's, i can see that corresponding fonts were embedded into the PDF (it might be that there is some confusion about naming of these fonts. For instance, PDF reports an embedded font "Arial" with "Actual name: ArialMT" while Indesign is simply missing "Arial", without any further information except that it has the status "not embedded").
Strangely, there also are missing fonts that i can find nowhere in the Powerpoint file (But several people worked on this presentation). I tried several versions and installations of Windows/Powerpoint/InDesign, without luck.
Workaround for now is export all slides as PNG. Any ideas what i can do to solve this problem?
Many thanks for assistance,
Andreas

Part of your problem is associated with PowerPoint 2010.
Microsoft's "save as PDF" leaves a bit to be desired at best.
Acrobat 9 (and obviously the earlier versions of Acrobat) do not support any of the Office 2010 components via the PDFMaker component.
If you print to the "Adobe PDF" PostScript printer driver instance from PowerPoint 2010 to create PDF, make sure you use joboptions that embed all fonts. The "out of the box" Standard joboptions do not do that. Try High Quality Print joboptions instead.
(The next full version of Acrobat will fully support PDFMaker with Office 2010! Even then, it will be critical to set joboptions that embed all fonts with no exceptions!)
- Dov

Missing Fonts in Photoshop CS4

I opened an existing CS2 photoshop file in CS4 and I get a missing font error. The font that it can't find is on my system.
How do I "add" this font so PS can see it?
Thanks.

Yeah, I hear ya. But this seems to be a big complaint with 64 bit systems. And since all fonts show up and work fine in all other programs... seems like another adobe bug to me.
If you want to be a bit specific, Arial has 10 types. Only two show up. Regular and bold. And I'm not alone with this problem.
This was a bug (from what I read) in office 2007. But I never used 2007. However it wasn't a problem in office 2003 nor is it with my current version of 2010. As I said, no problems whatsoever with anything except... photoshop cs4 64. (works fine in 32 bit vista)
Now, FWIW, I haven't played much with font directories in the past, but it seems win7 is putting them into their own... kind of "folder". (could be wrong)
That is, in arials case, for instance, they aren't spread out. As... arial normal, black, bold, etc. They seem to be all lumped in to one. Click on it and they all open for display and are all there but I don't remember them that way in older windows progs.
But as I said, everything is fine in notepad, wordpad, excel, word, etc. etc. etc. A corrupt font is one thing, but I can't see a corrupt font working in everything but one program. And they DO work in dreamweaver.
Ok... update. As I said, tried putting them (the arials) in the adobe font directory (which I said was empty). Nothing. Tried again and it duplicated them. Still nothing. Went in and dumped the duplicates... seems to be working.
So, problem kinda solved. Just no clue why.
I need a drink and a few excedrins.

Missing fonts in Preflight NOT in document

I'm using ID CS3 (5.03) and I'm relatively new to ID and Leopard. I've just started working with an editor who's using InCopy CS3 on a Mac and we've been having some font problems. I've just realized I'm going to have to update my font library to start using Open Type fonts because when I shared my old Postscript fonts with the editor they didn't work on her system.
I've purchase the OpenType fonts I need but when I relinked her InCopy files to my ID doc there were some strange font substitutions and I did "Find font" and replaced the unwanted fonts with the ones I wanted. I also went through all the Paragraph and Character Styles to make sure only the fonts I want are there.
So, in "Find font" only the fonts I want are listed but when I try Preflight, it still shows the unwanted font substitutions. If I click on the bullet "find font" it doesn't show up in the dialog box. Also, if I export as a PDF the unwanted fonts don't show up in the embedded fonts and there don't appear to be any problems. I tried saving as an INCX file and when I open, I still have a problem with Preflight but not "Find font".
It's going to be a long document but we're in the beginning stages so I don't want any problems with the commercial printer.
I found this in the database but it doesn't solve my problem (it just says to use the most recent update):
Fonts appear as missing even though they have not been used in InDesign CS2 document
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401180&sliceId=2
Any suggestions about how I can resolve the Preflight problem which doesn't show up in the document?

Yes, I did try that and the fonts still appeared in Preflight but not in Find fonts. Since I'm only about 30pp. into a 150+pp. document I decided to copy/paste into a new document and check Preflight everytime I did a new section. It did help me determine where the problems were (mostly in the notes but a few odd spaces here and there). And when I placed/relinked the InCopy docs the bad fonts would sometimes appear but I was able to catch them and replace them in the beginning so they didn't show up in Preflight. There were no characters with the bad fonts only spaces or hard returns. Maybe the find font feature can't find a font w/o any characters? This was definitely a time consuming effort but hopefully I won't have to go through it again!

Missing font problem

Similar Messages

Maybe you are looking for