Missing fonts after additional install...

I've been using InDesign CC for a couple weeks to update catalog pages last edited in CS6 without any issues. Yesterday, I installed Dreamweaver CC and now when I go back to InDesign it says I'm missing Myriad Pro. The font is still installed on my computer, InDesign just can't find it. Am I missing something here?
Thanks

Thank you for the response...I actually just shut down InDesign and started it up again and the font was there. Makes no sense since I had completely rebooted my computer but at least its back.

Similar Messages

Various missing drivers after re-installing Win7 64 bit on hp pavilion dv7-6111eo

Aloha
First off... I'm no techy, geek or nerd... And I mean those words in the best way, to those who are.
In this case You need to see me like a kid in kindergarden, being taken by the hand, and being shown what to do, down the the last detail. Sad but true.
Without me knowing why, I experienced missing several DLL-files, and often got error messages about those.
A pain in the neck, so I re-installed Windows 7 64 bit, as I didn't want to mess with those DLLs missing.
After that re-installing, I couldn't get internet-connection to my router. Luckily I have a 10+ year old stationary, where I after some time found the driver I needed, so that works now.
But now it seems there's several other drivers missing/not been installed.
I got a little info, from another post, what to provide with info, and hope that will be enough. if not, then please let me know the additional info that may be needed, and where I can find those on my PC, so I can provide these.
Missing drivers:
Network Controller;
Hardware ID: PCI\VEN_8086&DEV_008B&SUBSYS_53158086&REV_34
SM Bus Controller;
Hardware ID: PCI\VEN_8086&DEV_1C22&SUBSYS_1659103C&REV_05
Universal Serial Bus (USB) Controller;
Hardware ID: PCI\VEN_1033&DEV_0194&SUBSYS_1659103C&REV_04
I have 4 USB-ports, but only one will work, the others don't respond, and I need all four running at the same time. Plus I'd like to have everything in order after I had to re-install Win 7.
I thank You in advance for any and every help I can get. Just have in mind, that I need the things carved into paper.
This question was solved.
View Solution.

Hi:
You need these drivers...
SM Bus Controller; Install this first and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102010-2&cc=us&dlc=en&lc=en...
Network Controller;
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99014-2&cc=us&dlc=en&lc=en&...
Universal Serial Bus (USB) Controller;
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100294-2&cc=us&dlc=en&lc=en...
You will also need this bluetooth driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99500-2&cc=us&dlc=en&lc=en&...

Missing Fonts after using Migration Assistant

I used the Migration Assistant to Migrate from one Mac to Another and now Indesign has missing fonts. I re-installed Indesign and it's still not working.
I am getting the following error - Missing Fonts The Doument "document.file" are not currently available on your system. The text will use a substitute font until the original font becomes available.
One of the font missing is ITC New Baskerville T1. But it's not only T1 fonts that are missing. I check with Font Book to make sure that this font is in there and it is. I cleared the font cache and checked adobe's documentation but I can't seem to figure this one out.
http://kb.adobe.com/selfservice/viewContent.do?externalId=327791
http://kb.adobe.com/selfservice/viewContent.do?externalId=328542
Please help !

Most Adobe products seem to install fonts in 'non-standard' places. So it is annoying but not a surprise that Migration Assistant didn't find them. It is odd that reinstalling InDesign didn't fix it. Try restarting while holding down the Shift key, that will boot you into Safe Mode which, among other things, flushes the font caches. Maybe it is just confused!

Missing fonts after installing Illustrator CC

Illustrator CS5 and CS6 (and previous versions) came with a set of core fonts, e.g. Myriad Pro, included upon install.
I uninstalled Illustrator CS6 (and all other CS6 products) before installing Illustrator CC, but none of the fonts were included, so in Illustrator I have no MyriadPro (the font appears in the font list, but has an asterisk next to it to indicate a subsitution is being made). Are these fonts no longer included?
Okay - fixed. A restart later and the fonts are there. They must be registered with Windows on restart, which is an odd way of doing it as there's no requirement that the computer be restarted between font installations.
Message was edited by: tompagenet

Thanks for the reply, but the problem is deeper than that. After Illustrator CC, the font is invisible to every program except Illustrator CS6. So it appears that Illustrator CC has "removed" the font from my computer with the exception of Illustrator CC. In any case, I have thousands of documents that use this font. I'm not sure how I can deal with this.

Problem with fonts after lion install

after installing lion, font book detects problems with fonts

Likely a corrupted font cache.
Download the free OnyX and run all the cleaning and maintainence aspects and reboot.
http://www.titanium.free.fr/
Read my post about backup, repair and restore options and the link to Pondini's TimeMachine page
https://discussions.apple.com/message/16276201#16276201

Missing font after 10.5 upgrade

I had to do an erase & install when upgrading from 10.4 to 10.5. Once done, I found that at least one font (Bradley Hand) was missing. (Every time I open iWeb, I get an error message saying that Bradley Hand is missing even though I have edited my web pages to use other fonts).
A guy I spoke to on the Apple support line said that Bradley Hand is normally installed as part of OS 10.5, so something must have gone wrong in the installation. He then said I should archive and install the system software again which didn't help. Can Apple not just send me the font for installation? Any other suggestions?
Cheers, MEHHK

Have you looked directly in the folder Library/Fonts to make sure the font is really missing (and you are not just getting a bad message from iWeb)? If you open TextEdit and do Format > Font > Show Fonts, is this font really missing from the list?

How to restore missing fonts after Mavericks upgrade

If your fonts are not working in Pages and other software after a Mavericks 'upgrade', it might be that you still have them, and simply need to turn them back on...
1. Go to Font Book
2. Find the failing fonts.
3. If they are marked 'Off' then right click them and highlight 'Enable Fonts' option.
Hope this helps!
Dan
FWIW Mavericks has wasted DAYS of my time this week... it disabled fonts, made my WD HDD incompatible, trashed Time Machine and lost my Google Drive folder, so my files don't sync etc.

There's a very old thread about this for CS2. Domingo Chavez listed the required fonts and where they belong for that version, and even posted them for others to download and replace. I don't know if the collection has changed, but judging from my system I think not, so it would be worth trying the older files. As always, back up first..
Start reading at http://forums.adobe.com/message/1308262#1308262 where you'll see the lists, and a bit further down you should find the links to where the files were posted. The first link is to a.rar archive, further down is a link to a slightly freindlier .zip version. What the heck, here's that link, which still seems to be active: http://public.newrandom.com/Reqrd.zip
But read the thread, anyway, so you understand what's up.

Missing fonts after upgrade

I've noticed that a key group of fonts I use on a regular basis are not being listed in my programs, however they are being listed in Font book as being installed. This has only been since I upgraded to Lion.
The two fonts I am specifically looking for are calibri and Myriad Pro
Any suggestions?

Good idea about getting it from a backup. Never done this before, fingers crossed that I have a recent backup!
I'll see if this works.
Cheers

Missing partition after re-installing windows 8

Laptop: Dell Latitude E5530
OS: Windows 8
Problem: The laptop went into the dreaded Automatic repair loop and after trying all suggestions I found online, I gave up and resorted to re-installing. Before the re-install my laptop had 2 partitions (C and D).
To re-install, I inserted the recovery DVD and used the Dell tool to do a re-install with the option to recover my data. All went well. However when the computer boots the D drive is not visible under My computer. It is visible under Disk Management but
I cant do anything to it. When I right click it the menu only give me a help option. When I boot from a Linux USB stick, I can view and access data on both partitions.
I need to access the D drive on windows what should I do? Thanks

It is possible to revert the protections on the recovery partition to allow access to it, however if your notebook is under warranty I recommend you contact Dell technical support. It may be that fiddling with the recovery partition may void your warranty
unless directed to by a Dell representative.

Missing Features after Clean Install

Hi all,
I'm creating a new thread with that subject because now it got out of hands. I mean, it wasn't fitting anymore in the thread I initially wrote in it.
Here is my problem:
in bridge, under the tool menu, the only options I have stop at cache. There is nothing after that i.e. Photoshop, Illustrator,... Also, I wanted to use the option Output to Web or PDF but after selecting the files I want to use and clicking that option, the panels move but the output panel is not showing like it is suppose to show.
In my department, my co-worker, sitting next to me, has it working fine. Today, I uninstall all CS4, removed every files with CS4 in it. I also used the MacClean provided by Adobe (it did nothing useful by the way...). I re-installed everything and I still have that problem...
Help me!!! please. I'm on a Mac 2.66 Dual-Core Intel, OS 10.4.11 with 5GB of DDR2 Ram.

Hmmm
Check the following path:
./Applications / Adobe Bridge CS4 / Required /
and see if the respective plug-ins are there, such as Photoshop Adapter.plugin.
I don't have the complete suite as such, as I run older versions of InDesign, Illustrator and Acrobat, so I can't tell you the other plug-ins are called, but I imagine they are similarly named for the other applications in the suite.
When you installed CS4, had you perhaps improperly uninstalled CS3? Starting with CS3 you have to use the Adobe Uninstaller in Applications / Utilities / Adobe /. You cannot drag the Photoshop folder to the trash like we could do with older versions.
If that is the case, then run the Adobe CS4 uninstaller first in order to get rid of Photoshop 11 properly. Then look for the Adobe CS3Clean script in the downloads section of the Adobe web site, download it and run it. This is NOT necessary if you keep CS3 installed on your disk. I have all versions of Photoshop from version 7.x through 11 happily coexisting on my hard drive. I can even run two versions simultaneously by launching the older version first and assigning different drives for their scratch.

Icons missing even after re-install?

When I go to "new project" there are no icons in the box on the right. I've tried re-loading iLife but it still has no icons. I'm in 6.0.5 so I have the latest update. Help?
Pam

When I go to "new project" there are no icons in the box on the right. I've tried re-
Pam,
do you mean, the templates "Piano", "Electric Guitar", ...
Check your System Library. All the templates for the new projects should be installed in the folder
Your Macintosh HD > Library > Applications Support > GarageBand > Templates
The "Templates" folder either may be missing or have a permissions problem, so you cannot read it.
If the files are missing, restore them from your backup, or reinstall GarageBand. How did you "reload iLife"?

Missing fonts after reinstall

I reinstall Adobe photoshop elements 11 and lost some of the fonts including ITC Bradley Hand. What do I need to do to get the fonts back?

I am sorry Dottysquare but ITC Bradley Hand is not an Adobe font. You can find a list of the fonts we produce at http://www.adobe.com/fonts.

Installing missing font during document opening

Hi All,
I have a requirement of installing the missing fonts in a document when the document is opened.
I have used the kMissingFontSignalResponderService to handle the missing font.
Because InDesign API does not provide any facility to install font, I have used the Windows API for the same.
When I get the missing font signal, I install the font using the ttf file and then broadcast the WM_FONTCHANGE message.
The problem is that I am not able to get the IPMFont instance of the just installed font. I require that instance to call the SetRequest(IPMFont*) method of IMissingFontSignalData. But I never get the instance for the recently installed font. Using methods like QueryFontByDisplayName in IFontMgr to get the IPMFont instance returns null for the installed font.
The font is indeed installed correctly but I am unable to notify the font manager about the new font.
Can anyone shed light to solve this issue?

Hi Andrew,
I tried ForceUpdateFontSystem too. Yet I do not get the IPMFont instance. Seems like the font manager is still unaware of the installed font. The font is indeed installed but the missing font alert appears once. If I open the document again there is no missing font alert as the font is indeed installed.
Can you kindly put some more inputs?

OSX 10.6 and a missing font

I would be very grateful for a pointer here...
I updated my home iMac to OSX10.6, then up to 10.6.2
I left the machine and the upgrade seems fine. However, my daughter's Club Penguin game on the web won't show some of the type and I think a font has gone missing/ been messed up. All other writing appears ok but not the name/ password or some of the web textboxes
How do I find the missing font and re-install it? i am wary of messing with the fonts.
(I have a time machine backup ok)
pete

You can migrate your MobileMe account to iCloud at http://me.com/move even with Snow Leopard - when asked to confirm that you have Lion on your Mac, just lie and say 'yes'.
If you have MobileMe mail set up to collect mail from external POP accounts you should cancel this before migrating, or you may find it still working in iCloud (where it isn't supposed to) and with no way of stopping it. You may find the MobileMe email settings will continue to work for a time after migrating but it will stop eventually so you should not rely on this. You should delete your MobileMe email account from Mail.
You can then set up Mail manually in Snow Leopard to access iCloud email; it's a slight fudge because the 'wizard' will attempt to connect you to MobileMe as soon as you enter an @me.com address. The process, which includes a workaround for this, is described here:
http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
You may be able to sync your calendars to iCloud by means of an unsupported hack, but you cannot sync Contacts or Bookmarks, and iCloud's other facilities will not work. This page outlines the situation when you migrate to iCloud, including a link to the calendar hack:
http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html

Indesign Missing Fonts

I'm looking for help with Adobe InDesign CS4 (on Mac with Lion). I received a document that has a missing font. I installed the font and it's available in other programs but not in InDesign. How do I make it available there too?

Try deleleting the adobefnt**.lst files wher ** is a two digit number, then reboot.

Missing fonts after additional install...

Similar Messages

Maybe you are looking for