Missing fonts after installing Illustrator CC

Illustrator CS5 and CS6 (and previous versions) came with a set of core fonts, e.g. Myriad Pro, included upon install.
I uninstalled Illustrator CS6 (and all other CS6 products) before installing Illustrator CC, but none of the fonts were included, so in Illustrator I have no MyriadPro (the font appears in the font list, but has an asterisk next to it to indicate a subsitution is being made). Are these fonts no longer included?
Okay - fixed. A restart later and the fonts are there. They must be registered with Windows on restart, which is an odd way of doing it as there's no requirement that the computer be restarted between font installations.
Message was edited by: tompagenet

Thanks for the reply, but the problem is deeper than that.  After Illustrator CC, the font is invisible to every program except Illustrator CS6.  So it appears that Illustrator CC has "removed" the font from my computer with the exception of Illustrator CC.  In any case, I have thousands of documents that use this font.  I'm not sure how I can deal with this.

Similar Messages

  • No startup after installing illustrator?

    HI,
    I just downloaded illustrator on my MAC (OSX 10.6.8), but it will not startup. I tried a several times without succes. Then I uninstalled it and did the installation again. But it still doesn't work.What's wrong?
    <Removed by Moderator>

    Great ! Problem solved!  Thanks!!!!
    isabelle
    Op 13-mei-2014, om 10:51 heeft Sanjay Kumar het volgende geschreven:
    no startup after installing illustrator?
    created by Sanjay Kumar in Illustrator - View the full discussion
    Hello,
    Can you please check if verdana fonts,(all four variants i.e. regular, bold, italic and bold italic) are present and enabled.
    Sanjay
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6378017#6378017
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Illustrator by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Missing font warning in Illustrator

    Hi,
    I received a PDF document, which I have to rearange and redesigned. I assume that it was originaly created in Indesign and exported in PDF for printing. Since i don't have an Indesign file to work with, I opened PDF in Illustrator. When I do that, the missing font warning apears and says that Arial font (which I already have installed) will be displayed using substitue font. I am lost here, sice the text is in Slovak language and some of the letters are missing with this "substitute font".  Appreciate any help.
    Maja

    Not really certain what you are asking.
    You need the exact version of Arial that was used to generate the PDF if you don't want any substitution. It sounds as though the PDF was generated poorly. Not much cna be done on your end without the exact font other than to simply re-key or reconstruct the text. Realize that there are probably 20 different fonts all named "Arial."

  • Missing Fonts after using Migration Assistant

    I used the Migration Assistant to Migrate from one Mac to Another and now Indesign has missing fonts. I re-installed Indesign and it's still not working.
    I am getting the following error - Missing Fonts The Doument "document.file" are not currently available on your system. The text will use a substitute font until the original font becomes available.
    One of the font missing is ITC New Baskerville T1. But it's not only T1 fonts that are missing. I check with Font Book to make sure that this font is in there and it is. I cleared the font cache and checked adobe's documentation but I can't seem to figure this one out.
    http://kb.adobe.com/selfservice/viewContent.do?externalId=327791
    http://kb.adobe.com/selfservice/viewContent.do?externalId=328542
    Please help !

    Most Adobe products seem to install fonts in 'non-standard' places. So it is annoying but not a surprise that Migration Assistant didn't find them. It is odd that reinstalling InDesign didn't fix it. Try restarting while holding down the Shift key, that will boot you into Safe Mode which, among other things, flushes the font caches. Maybe it is just confused!

  • Scanner not showing up in CS5 Extended after installing Illustrator 6

    I have been working with Photoshop CS 5 Extended without any problem. I installed the TWAIN driver for it and when I go to FILE ---- IMPORT My scanner would show up and I could scan right ionto photoshop. That's how I like to do it.
    I installed Illustrator 6 the other day, and when I went to scan something into Phostoshop CS 5 today, I noticed that my scanner was not in the FILE ------- Import menu. I can see that the TWAIN file is where it's supposed to be in the plug-ins - Import Export folder.
    Why is it not showing up in my Photoshop FILE ---- IMPRT menu?
    Is it because I have CS5 and Illustrator 6?
    Is it a 64-bit mode --- 32 bit Mode thing? I tried to switch it to 32 bit mode, but there is no choice for it under the GET INFO menu.
    Please help me find a way so I can scan directly into Photoshop CS 5 again using my FILE -- IMPORT menu button.
    Thanks in Advance

    Some more info is needed and it wouldn't hurt if we saw install logs.
    Mylenium

  • Missing templates after installing 10.1.3 - no diagrams

    Hi,
    Ive happily used 10.1.2 for UML Class diagrams etc recently, have downloaded the full install for 10.1.3 (as very interested to try out the Sequence diagrams).
    After installing 10.1.3 I notice there are very few Application templates available (only "No template" and "Java App") - so there is no Diagram option under the General category when creating New.
    What setup do I have to perform to activate the Diagramming options ?
    Is this covered in the installation Readme anywhere ?
    Thanks. Darren.

    Darren,
    Glad that helped, if you have any comments or suggestions about the Sequence Diagrammer, please post any feedback you have and I will pass it on to the Developer.
    Regards,
    Lisa Sherriff
    JDev QA

  • Missing fonts after additional install...

    I've been using InDesign CC for a couple weeks to update catalog pages last edited in CS6 without any issues. Yesterday, I installed Dreamweaver CC and now when I go back to InDesign it says I'm missing Myriad Pro. The font is still installed on my computer, InDesign just can't find it. Am I missing something here?
    Thanks

    Thank you for the response...I actually just shut down InDesign and started it up again and the font was there. Makes no sense since I had completely rebooted my computer but at least its back.

  • Adobe X - Chinese font missing. After install still does not work

    In adobe X when opening some pdf documents, adobe is asking for a chinese font. I have downloaded the font from the link in the message, but afterwards the same error message still appear - also after restart of the whole PC. Running windows XP
    Is there somehow that I can check if this has been installed correctly or somewhere there are further logs ?

    Hi rossoneris,
    Please check the 'Fonts' folder if you have installed Chinese fonts or not.
    What error do you get when you try to open the pdf's?

  • I receive error messages after installing Illustrator and InDesign

    Before today, I spent 3 days downloading the trial programs for Design & Web Premium CS6:
    Photoshop, Illustrator, InDesign, Audition, Bridge, DreamWeaver, ExtendScript Toolkit, Extension
    Manager, FireWorks, Media Encoder, Muse, Prelude, Widget Browser, Flash Builder 4.7, Flash Professional and Media Encoder. (This is all through my online classes, and I do have a serial number that was sent to me, but no CDs.)
    I used Adobe Application Manager to install them.
    Everything downloaded and installed fine on my main computer (running Windows 7), but on my older,
    slower, backup computer (running Win XP) I encountered problems.
    I have DSL (the lowest speed, 1.5), Win XP (32 bit) SP2, 28.6 GB capacity hard drive.
    Used space (after the downloads): 17.2 GB (61%)
    Free Space: 11.4 GB (39%)
    Downloading the trial on my Win XP computer gave several errors, and I had to re-install and/or update (at first it would say 'Try,' but then after that was done, some of them would say 'Update') most of the programs several times before they finally all seemed to fully download OK. For one of the programs, it gave an error saying there was not enough hard drive space. So then I deleted a few programs from my hard drive. But all the other programs gave different errors, which would say that they installed, but that there were problems, or that they could not install, etc.
    But, after downloading everything, and everything seeming to be OK, when I tried to open Photoshop CS6 (trial version), it said:
    Photoshop.exe - Entry Point Not Found
    The procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library KERNEL32.dll.
    (And it had the red circle with the white "X" inside it.)
    I then tried to open Illustrator, and it said:
    "Illustrator.exe - Application Error
    The application failed to initialize properly (0xc000001d).
    Click on OK to terminate the application."
    I then tried to open InDesign and it gave the same error as Illustrator.
    So then I ran all my anti-virus, anti-spyware and diagnostic software to see if there were any viruses or spyware or malware found. Nothing was found except some tracking cookies.
    Then I uninstalled all the Adobe software, which took a while.
    Then I used Adobe Application Manager to only download Photoshop. It seemed to download and install, but finally it said, “Installation completed though some optional components fail to install correctly.” This is one of the errors I had gotten previously. When I clicked to see more info about the error, it said to either find a certain file, which I could not find because it looked like some of the files it mentioned were invisible files, or it gave another option, to download Microsoft Visual C++ 2010 Redistributable Package (x86).
    So I went to Microsoft’s website and downloaded that. But when I tried to install it, it said I needed to install Windows Installer 3.1 or higher. So I went to that website and downloaded that (the downloaded installation file was called WindowsInstaller-KB893803-v2-x86.exe. So I installed that.
    Then I went back and tried to install Microsoft Visual C++ 2010 Redistributable Package (x86) again (that installation file is called vcredist_x86.exe). After it extracted the file, it said, “Microsoft Visual C++ 2010 x86 Redistributable Setup: (red circle with white “X” inside) “Setup has detected that this computer does not meet the requirements to install this software. The following blocking issues must be resolved before you can install Microsoft Visual C++ 2010 x86 Redistributable Setup software package.” “Please resolve the following: A newer version of Microsoft Visual C++ 2010 Redistributable has been detected on the machine.” Then at the bottom of the error window, it said: “Please, see the Microsoft Visual Studio website for more information.” Then it only had a “Close” button.
    I went to the Microsoft Visual Studio website, but I’m not sure what to do. It has an Office Developer Tools for Visual Studio 2012 (“Now you can create rich, immersive apps for Office 2013, SharePoint 2013, and Office 365.”) with a “Download Now” button, but that does not sound to me like what I need.
    I saw, on one Adobe site, a suggestion to go to the Adobe Creative Cloud website and download the software from there (which I noticed also used the Adobe Application Manager). So I did that for Photoshop, and after it installed and updated, it gave me the same error: “The procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library KERNEL32.dll.”
    As of Friday March 29, I have been working on downloading and installing the software for FOUR (4) days now without success, and it is just so frustrating because it is taking so much time and effort.

    Branching this to a new discussion as it appear you are facing difficulties with the installation or running the programs you have been downloading and installing.

  • Missing Fonts in Adobe Illustrator CS5 Version 15.1.0 Agenda Bold and Agenda Black

    Hi,
    We are using Adobe Illustrator CS5 Version 15.1.0  to re-create Points of Sales (PoS) that our 3rd party company sends us. But when we open the PoS from the 3rd Party we get a message saying we are missing 2 fonts. The names of these are Agenda Bold and Agenda Black. Are these Fonts from a newer version of Illustrator or are we able to purchase/download these?
    Any help would be much appreciated!!
    Thanks,

    These are not standard system or Adobe fonts. You will have to buy them from whatever type foundry that produces them.
    Mylenium

  • Missing folder after installing myapplication with AppBuilder 8.5

    In the project property for the installer, I created a data-folder for my application. This folder is for later use with the myapp. So during installation its empty.
    After installation on the target PC, I miss the folder. Only the folder with the myapp has been created.
    My system: LV8.5 full, AppBuilder on winXP SP2
    Any idea?
    Andreas

    The installer builder does not support creating an empty folder. It's a feature that's been requested for a while, and we'd like to add it, but it has not been a high priority feature. The workaround is to install a dummy file (0 bytes) to the folder. Or you could configure the installer to run a batch file that creates an empty folder. The downside to using the batch file, however, is that the uninstaller won't know to remove the folder.

  • Missing font after 10.5 upgrade

    I had to do an erase & install when upgrading from 10.4 to 10.5. Once done, I found that at least one font (Bradley Hand) was missing. (Every time I open iWeb, I get an error message saying that Bradley Hand is missing even though I have edited my web pages to use other fonts).
    A guy I spoke to on the Apple support line said that Bradley Hand is normally installed as part of OS 10.5, so something must have gone wrong in the installation. He then said I should archive and install the system software again which didn't help. Can Apple not just send me the font for installation? Any other suggestions?
    Cheers, MEHHK

    Have you looked directly in the folder Library/Fonts to make sure the font is really missing (and you are not just getting a bad message from iWeb)? If you open TextEdit and do Format > Font > Show Fonts, is this font really missing from the list?

  • How to restore missing fonts after Mavericks upgrade

    If your fonts are not working in Pages and other software after a Mavericks  'upgrade', it might be that you still have them, and simply need to turn them back on...
    1. Go to Font Book
    2. Find the failing fonts.
    3. If they are marked 'Off' then right click them and highlight 'Enable Fonts' option.
    Hope this helps!
    Dan
    FWIW Mavericks has wasted DAYS of my time this week... it disabled fonts, made my WD HDD incompatible, trashed Time Machine and lost my Google Drive folder, so my files don't sync etc.

    There's a very old thread about this for CS2. Domingo Chavez listed the required fonts and where they belong for that version, and even posted them for others to download and replace. I don't know if the collection has changed, but judging from my system I think not, so it would be worth trying the older files. As always, back up first..
    Start reading at http://forums.adobe.com/message/1308262#1308262 where you'll see the lists, and a bit further down you should find the links to where the files were posted. The first link is to a.rar archive, further down is a link to a slightly freindlier .zip version. What the heck, here's that link, which still seems to be active: http://public.newrandom.com/Reqrd.zip
    But read the thread, anyway, so you understand what's up.

  • SharePoint 2013 Configuration Wizard Missing Components after Install ServicePack 1

    Hello,
    today we have installed SharePoint Service Pack 1 for SharePoint Server 2013 inclusive Service Pack 1 for all language packs (we used the new released Service Packs).
    Our SharePoint Environment has only one SharePoint Server.
    Many
    language packs
    are
    installed
    on
    this
    server.
    If we try to run the configuration wizard through the GUI, then we get the following error:
    If we try to run "psconfig -cmd upgrade -inplace b2b -wait" then we get also an error:
    SharePoint Products Configuration Wizard version 15.0.4569.1503. Copyright (C) Microsoft Corporation 2012. All rights reserved.
    The upgrade command is invalid or a failure has been encountered.
    The server farm will not work with missing installs. Add "-cmd installcheck -noinstallcheck" to the command-line to ignore this warning.
    The following is missing on :
    Service Pack 1 for Microsoft SharePoint Server 2013 Language Pack (KB2880554) 64-Bit Edition
    Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
    Service Pack 1 for Microsoft SharePoint Server 2013 Language Pack (KB2880554) 64-Bit Edition
    Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
    Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
    Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
    We checked the Installation in "Programm and Features", result see below:
    Next step we run the PowerShell command: Get-SPProduct -local, result see below:
    ProductName                                                                          
    Required Missing   Servers   
    Language Pack for SharePoint 2013  - Bulgarian/български                              True              
    {ServerName, }
    Language Pack for SharePoint 2013  - Croatian/Hrvatski                                True              
    {ServerName, }
    Language Pack for SharePoint 2013  - Romanian/Română                                 
    True               {ServerName, }
    Language Pack for SharePoint 2013  - Thai/ไทย                                        
             True               {ServerName, }
    Language Pack for SharePoint and Project Server 2013  - Chinese (PRC)/中文(简体)    True               {ServerName, }
    Language Pack for SharePoint and Project Server 2013  - Chinese (Taiwan)/中文 (繁體)   True               {ServerName, }
    Language Pack for SharePoint and Project Server 2013  - Czech/čeština                 True              
    {ServerName, }
    Language Pack for SharePoint and Project Server 2013  - Danish/dansk                  True              
    {ServerName, }
    Language Pack for SharePoint and Project Server 2013  - Dutch/Nederlands              True               {ServerName,
    Language Pack for SharePoint and Project Server 2013  - Finnish/suomi                 True              
    {ServerName, }
    Language Pack for SharePoint and Project Server 2013  - French/Français               True               {ServerName,
    Language Pack for SharePoint and Project Server 2013  - German/Deutsch                True              
    {ServerName, }
    Language Pack for SharePoint and Project Server 2013  - Greek/Ελληνικά                True              
    {ServerName, }
    Language Pack for SharePoint and Project Server 2013  - Hebrew עברית                  True              
    {ServerName, }
    Language Pack for SharePoint and Project Server 2013  - Hungarian/magyar              True               {ServerName,
    Language Pack for SharePoint and Project Server 2013  - Italian/Italiano              True               {ServerName,
    Language Pack for SharePoint and Project Server 2013  - Japanese/日本語      True               {ServerName, }
    Language Pack for SharePoint and Project Server 2013  - Korean/한국어                    True              
    {ServerName, }
    Language Pack for SharePoint and Project Server 2013  - Norwegian/norsk               True               {ServerName,
    Language Pack for SharePoint and Project Server 2013  - Polish/Polski                 True              
    {ServerName, }
    Language Pack for SharePoint and Project Server 2013  - Portuguese/Português          True               {ServerName, }
    Language Pack for SharePoint and Project Server 2013  - Portuguese/Português (Brasil) True               {ServerName, }
    Language Pack for SharePoint and Project Server 2013  - Russian/русский               True               {ServerName,
    Language Pack for SharePoint and Project Server 2013  - Slovak/Slovenčina             True               {ServerName,
    Language Pack for SharePoint and Project Server 2013  - Spanish/Español               True               {ServerName,
    Language Pack for SharePoint and Project Server 2013  - Swedish/svenska               True               {ServerName,
    Language Pack for SharePoint and Project Server 2013  - Turkish/Türkçe                True              
    {ServerName, }
    Language Pack for SharePoint and Project Server 2013  - Ukrainian/Українська          True               {ServerName, }
    Microsoft SharePoint Server 2013                                                     
    True               {ServerName, }
    What's the mistake?
    Why we can't run the configuration wizard?
    Has anyone answers?
    Thanks a lot.
    Regards Mario

    try to run the below command on all server in the farm and then run the config wizard
    Get-SPProduct -Local
    Above command basically update the product information into the configuration database. Read this blog from the Trevor.
    http://thesharepointfarm.com/2013/12/the-magic-of-get-spproduct-local/
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Missing fonts after upgrade

    I've noticed that a key group of fonts I use on a regular basis are not being listed in my programs, however they are being listed in Font book as being installed.  This has only been since I upgraded to Lion. 
    The two fonts I am specifically looking for are calibri and Myriad Pro
    Any suggestions?

    Good idea about getting it from a backup. Never done this before, fingers crossed that I have a recent backup!
    I'll see if this works.
    Cheers

Maybe you are looking for

  • KM Scheduler not working

    Hi all,                I have created a KM Scheduler and have also set the time table to it , but never runs at the scheduled time. And when I deploy from NWDS , I get the following errors. com.sap.portal.plugins.ConfigFrameworkArchiver > No privateA

  • Flash player error

    I am having this issue on all of our systems. "Please install the latest version of the free Adobe Flash Player" When I log in as the local or network admin flash player works perfectly.  If I log in with a user account I receive the message above. 

  • WHEN I OPEN IT THERE IS NOTHING EMPTY BOXES

    it started a few weeks ago. foxfire open's to no words just empty boxes

  • Importing graphic into hybrid page

    I've never used Blank Pages before, but I opened Dreamweaver's "2 column hybrid, left sidebar, header and footer" blank page. How do I correctly import a header graphic into the header area so that it adjusts to different display settings?

  • Can I charge iPhone 4 with iPad 's charger ?

    I know the iphone 4 's charger can not be charged for ipad, But I don't know whether the iPad's charger be used by iPhone 4 . Who know this ?