Missing Fonts InDesign 5.5 WIN

InDesign 5.5 WIN create problems with the fonts when I open a file from version 5.0. The font-installation in the windows font-folder is ok. The fonts are there, but InDesign doesn´t find it. Funny: When I create a new file, I can fix the "missing" font. It works well. Where is the problem?

Moving this discussion to the InDesign forum.

Similar Messages

Missing fonts - InDesign CS3

I've read all I could find about mssing fonts, but continue to have problems with opening InDesign files and receiving a message about a missing font(Arial Narrow).
Indesign CS3 v5.04
Two users(Administrator & a user(who has Local Administrator rights) have no problem with missing font when opening the same file.
Two different users(who both have Local Administrator rights) receive the message about missing font when opening the same file.
The PC has the font loaded in Windows,
I have copied Arial Narrow into Adobe\Indesign\Fonts directory
I have deleted all Adobe*.lst files
After the Adobe*.lst file is recreated the lst file has the specifics for Arial Narrow in the lst file.
Not sure what to try next

I didn't understand from the original message that the users were all working on the same PC. That would point away from the font problem, I think, and maybe toward a preferences corruption, though I couldn't say for sure.
Certainly I think trying the patch would be good, and yes, there may be Adobefnt*.lst files in each user profile that should be deleted (maybe that's all that's wrong). Otherwise, replacing preferences for the affected users might be in order.
On the same machine, assuming there is no problem about inidividual user customizations you don't want to share, you can copy the profile data from one user to another without problem, or you can rebuild each bad set from scratch. See this page for instructions (scroll down) and be sure to read the comments.Adobe InDesign CS4 * Setting preferences

Missing fonts OTF cs4 mac/win .eps

.eps created with Windows CS4 on windows OTF
-On OSX 10.5 CS4 .eps says Fonts are missing (Happens whether or not Font Reserve is active or not active)
-On OSX 10.4 CS4 .eps opens fine without any fonts in fonts folders (and NO Font Reserve running)
Things I tried:
Fontbook not using fonts in question or conflicting as far as I can see.
Cleaned all Fonts on system using Finagler
.eps not corrupt
What could cause this to happen?

Permissions problem on one ofte systems.
try repairing the permissions or perhaps an update for the software.
Font cache difficulty.

Missing fonts Photoshop CS3 in Win 7

Photoshop worked fine in XP Pro SP 3. I reformatted the HD and installed Win 7. I installed some postscript fonts and they don't show up in Photoshop but show up fine in Framemaker and MS Office products. Any suggestions.

Deleting the font cache files did not help, nor did copy the postscript files to Adobe's common font folder or to Photoshop's font folder. The particular font I wanted to install was Teff's trinite font, but I discovered this is a problem with any postscript files from any company (Tiro Typeworks, Monotype, etc.). I haven't seen this described with Win 7, but searching for a solution, I found that this seems to be an issue with Windows 64 bit systems (XP and Vista) and PS fonts and CS3 products. The only solutions I've found were to use otf fonts (not possible with trinite) or upgrade to CS4 (not something I plan to do, as it is too buggy in Premier, Encore, etc. and I will wait for CS5). Thanks.
The installation was directly through Win 7 "install font" option. As mentioned, these fonts work fine with Framemaker and MS Office 2007 products.

InDesign Freezes when Missing Links Missing Fonts

When I open an InDesign document that has missing/updated links AND missing fonts InDesign in a sense "freezes" as with both these error pop up boxes it refuses to recognize when I click on the "fix" or "cancel" or "ignore" buttons. The only way out is to force quit and the next time I start up and open the document when these boxes pop up I click "ignore" very quickly and then fix once I am in the document. very strange I know. Has this happened to anyone else?!? If so, is there a fix? Better than force quitting?!?
I am working in CS3 and OS 10.4.11 (Mac of course :)
- Christine

Just a thought -- if you use the Return key on the keyboard, does it dismiss the dialog boxes?

Missing fonts in InDesign CS4 - even when 'open' in Suitcase Fusion 3

Hi all, I'm running InDesign CS4 on a Intel Mac Pro (tower), about 4 years old, running OSX Snow Leopard (all updates applied).
Using Suitcase Fusion V3 for font management.
I have a document that previously had no font issues at all. Now when I open it InDesign throws up a 'Missing font' error.
I have the correct fonts installed and 'open' in Suitcase Fusion.
The font is available in Simpletext and Pages, but not InDesign and Illustrator.
The troublesome font was OK the other day and has been since it was installed.
I've not changed anything that I'm aware of... but now InDesign won't 'see' the font.
In the 'Find Font' dialogue box the 'Path' says it's 'Unkown or missing'.
InDesign can see the other weights in the font family (bold, italic etc) but not regular. And yet the entire font family is in the same folder on my hard drive.
I've tried deleting all the' Adobe.lst' files. No Joy.
I've run Font Doctor on the whole font family, its says it's OK.
I've tried re-installing the font from a back-up. Nada.
If anyone has any suggestions..... feel free to let rip!
As ever, I await your expertise and unstinting knowledge in these matters And, needless to say, I'll be mighty appreciative for it!
RP

Hi Bob, strangely... I've put the troublesome font, Dax (T1) Regular, in the Applications/Adobe InDesign CS4/Fonts folder and it seems to be working.
Never had to do that before.
Would be great to get back to 'normal'. If possible.
Although I have many duplicates spread across back-up drives and collected artwork folders, I've also tried to eliminate any duplicate 'open' versions. But the above solution is the only one that works at the moment.
RP
p.s. I also tried removing any AdobeFNT**.lst files, (where ** is a number) before the above work around. That didn't work either.

All fonts are missing in indesign

I closed my file last night with master pages items and text layers locked in the layers pallette.
The file is to the point that I have master pages set with columns, and guides, and pages, and footer with text. It is all layed out with images, ready to start typography. I used Myriad pro, and I think Bell ( this may have been brought in from dafont, not sure).
When I opened the file this morning it said that the fonts were missing. I tried to find the missing fonts, but ALL the fonts are missing in the font selection window.
This was when I realized that the layers were locked. I dont know if this had anything to do with it, but Ive never used layers before, so assume it is a connection.
I tried opening a new document and there are no fonts available there either. It says times, but you cant change it. It is showing pink backgound like when fonts are missing, and just Os'.
I opened illustrator to see if the fonts are available there, and they are, no problem. It is just indesign that is affected.
Can anyone help?
Mary

Try these solutions
http://forums.adobe.com/thread/526990
http://forums.adobe.com/thread/526991

Missing fonts in Windows InDesign CC'14 vs OSX

We are a school with about 500 Windows 7 machines. We also have an iMac suite (about 25 strong). We have a Creative Cloud subscription and have deployed it to all of our computer suites and our iMac suite. CC 2014 versions of the relevant products have all been pushed out, so there should be parity between the two platforms.
Our problem is that our Windows clients are outright missing 90% of the TrueType fonts that are available on the OSX (Mavericks) clients. Most of the Media classes are taken in the iMac suite, and therefore the majority of their content has been created in there, but two or three times per week the classes rotate to a Windows suite. Some students are encountering issues where fonts are missing after opening their INDDs in InDesign for Windows.
I discovered that InDesign for OSX has vastly more fonts than on its Windows counterpart, specifically of the TrueType variety. About 90% of the TrueType fonts on Windows were missing. As far as I could tell, all of the OpenType fonts matched.
Students get the follow dialogue when they launch InDesign with a missing font:
So yeah, that's my issue. I've literally spent all afternoon researching this issue to no avail and am pretty much stumped at this point.
Any help and advice will be more than appreciated!
Thanks for reading.

Early on in the life of Mac OS X (which has been around for over 10 years in multiple versions—we're now at 10.10), Apple advertised how many beautiful fonts were available with Mac OS X. And, it's true, they do install a lot of TrueType fonts.
Microsoft provides much fewer. As far as I can tell, most of them are installed with you install Microsoft Office products.
It's just the way it is.
I guess you could show students a list of the fonts installed with Creative Cloud apps (Minion Pro, Myriad Pro, etc.). You could also teach them about downloading Typeset fonts (although they won't be able to carry those to another location which doesn't have a CC subscription).

Missing fonts in PDF placed in InDesign

I was sent a PDF to make slight changes to it. Since the changes were so minor and relatively few, I thought it would be easiest to just place the pages of the PDF into an InDesign document and put white boxes over what needs to change.
I just noticed the Preflight panel says I'm missing Arial and Times New Roman which I know I have. I tried doing "Find Font" to replace the missing Arial with my Arial, but "Change" is grayed out so I'm thinking the fonts must not be properly embedded in the PDF.
I'm not sure if they have the original document the PDF came from (and if they do, it might be in Word). Is there a way I can fix this either in InDesign or with Acrobat?
Or, if I don't fix it, do you think that the missing fonts will not print properly?

You might be able to embed these fonts properly in the PDF. It isn't always successful, but in Preflight, open the fixups section and use the selection as in the screen shot. Then relink/replace the PDF in ID.
Mike

Missing Fonts in my inDesign file...

Just recently completed an inDesign file, but it is telling me it has missing fonts. The file was originally started in CS4 by a coworker and completed by me in CS5. I'm confused because the fonts show up in the file, but still are classified as missing. I tried to send this file to print, but they could not print it because of the missing fonts. If anyone could help me out, you would be doing me a huge favor. Thanks everyone and have a great day.

imjimjim wrote:
I understand how to get the fonts to work and I just received the Helvetica font's from him and got those working but the Berthold Akzidenz Grotesk aren't working. They can in a file with a strange icon (a grey box with green letters that spelled out "exec").
This is the one:
It's Mac OS X very unhelpful 'unrecognized file type' default icon, and it might be anything, from an unrecognized file format (unlikely because OS X should recognize most font files) up to a damaged download.
imjimjim wrote:
When I "find first" to see where the missing font is located, its on the first and second pages and it is the background graphics, which I think an outside party designed. If I can't get the Berthold fonts to work, what should I do next?
That's a problem on a different level. Is this in a placed EPS or PDF, or (sigh) even a placed InDesign page? Then it was up to the original designer to embed the fonts used into the image -- or, failing that, convert to outlines (which ought not to be necessary in a moderately modern workflow). About the only way to get it to work is to actually install these fonts on your system as well and hope it's the exact same version.

Find the Missing font text content in indesign document

How to find and get the missing font content in the indesign documents by using the SDK. give a tips and techniques.
Anybodys help me.

It wont answer your question, but you could have this problem too:
I have a problem in my current project where text frame having no text make the document report the usage of a font wich we dont want the project to use (times by exemple). The problem being that Indesign report usage of a font wich is in fact not applied to any text. Weird!
The easy fix is to identify those items (text frame class + no text) and reassign them as "unassigned".

I cant place a pdf in Indesign because of missing fonts

I am running into a problem with a pdf add I am trying to place in a booklet. When I go to export the Indesign document it tells me it cant because the pdf I placed in it has a font I don't have. I always thought you could place and print pdfs without having all the fonts. I thought it was only if you wanted to edit the pdf that you needed the font. Isn't that the point of a pdf? Does any one have a good solution for this? I am using Indesign cc 201 on a mac. The pdf is secure so I cant run any sort of preflight or flattening on it( at least as far as I know).

Is the export really failing, or are you getting a missing font warning and cancelling? The ad may not look good, but you should still be able to export, I think.
But bottom line here is that you need to educate the folks who send in the ads so they always embed the fonts.

Fonts missing in InDesign when they really aren't

I am using Adobe InDesign CS3 on the Windows platform, Windows XP Professional, Version 2002, Service Pack 2.
When I open certain documents in InDesign, I receive the "missing fonts" message, with certain fonts highlighted. However, when I investigated further to see what the replacement font was(by going into the text box), the missing font was definitely listed in InDesign.
Missing fonts include Helvetica Neue LT Std 57 Condensed, and Helvetica Neue LT Std 37 Thin Condensed.

Hey! The fonts were installed via the fonts control panel. I actually don't have admin access at my work computer and have to get the I.T. guy to install the fonts for me (VERY irritating). (Another gripe is that he hasn't been able to figure out a way to give me permissions on Vista's font panel since it doesn't seem to work the same as a regular folder.)
Some of the fonts that don't work are Type 1 and some are TrueType, but most are the former (I think most all the fonts on my old system were Type 1). I think in some cases there are newer Open Type fonts on the computers that conflict with them somehow or something (?). I don't know. It's very annoying. I suspect if I slaughter all the fonts on the system and just install the old ones things will be okay. I'm hesitant to do that though as there are lots of new fonts I wouldn't mind checking out.
I blamed Vista because I've had no font problems moving from one XP machine to another regardless of what fonts were already on its system. But now that I've moved up to the new platform many of the fonts just aren't recognized. In one case I found that -- although I couldn't install the fonts from an InDesign package font folder -- they worked when I installed them from the original CD. That didn't make much sense as the files should have been the same.
But anyway, it's annoying. Most of my previous work can't be opened with the correct fonts any more. Blah.
Phyllis

InDesign CS6 + Yosemite + Copy/Paste = Missing font

We use ITC Franklin Gothic throughout all of our pieces; it's installed and it's the default font setup. New and existing files have opened without issue until now. I opened an advertisement that needed to be resized, from our shared server and copied the contents. In a new document, I pasted the contents suddenly the font says it's missing. The images retained their links to the packaged folder on the server, the fonts just stopped working. I closed InDesign, then disconnected from the server in case there was some kind of conflict between the local font and the server font override from the packaged fonts folder (packaged from the local font installed, I made the source ad this same way). Loaded the new file, and got the expected missing links dialogue, but unexpectedly the fonts were still missing. I reviewed the missing fonts, and it was the entire family. I opened Suitcase, verified the fonts are active. Still no fonts in InDesign. Okay, disactivated font in Suitcase (maybe it needs an update), installed the font in Fontbook, need to get the ad done and I don't have time for this. Verified font works by opening a different file, making a new document, but as soon as I opened the ad with the missing the fonts, fonts go missing. I then changed the fonts to a different family, and tried changing them back, but the font doesn't even show in the list of fonts. I can't figure out why this particular method of copy and paste breaks the font. I've opened and created other files with this font family active, while this copy/paste file is open at the same time in another tab while it still says "no". The only work around I could use was to copy the entire packaged folder from the server to my desktop and just change the document properties to the size I need, then adjust the artwork to fit.
I'd like to find a resolution as to why copying and pasting broke this font even though the same missing font works fine simultaneously in a different document. Any suggestions/questions/thoughts/solutions would be very welcome.
System specs:
27" iMac (Mid-2011) 3.1 GHz i5
32 GB RAM
1 GB Video
10.10.2
Adobe InDesign CS6 8.1
Update: Looking through the font list, Franklin is being listed as a different font. Though the character palette, the font selected is ITC Franklin Gothic Std Book; the font listed in the Type drop-down menu is Myriad Pro, and once that was deactivated, Helvetica.

i don't see how that could be the case because I originally installed the font, created and packaged the ad, and the font is available for typesetting in a new document while this problematic document is open without being connected to the server.
I upgraded to creative cloud 2014 and this particular document is still a problem. This font issue is limited to this sole document. I'm guessing it has something to do with the copy and pasting. Tomorrow, I'll try replacing the font to something else and then copy/pasting it in the same way if it recreates the same problem with a different font.

InDesign CC missing fonts

I have a laptop that I use when I have to work away from home. My laptop is a macbook pro that I recently purchased (early October 2013). Both my iMac and macbook have gone through the recent updates to Mavericks and my iMac is working fine with Creative Cloud. However, when I was trying to open documents I share through Drop Box on my laptop, using InDesign CC that was just upgraded a few days ago, I was told I was missing 3 fonts, all fonts that are always in InDesign. So I turned off my computer and rebooted it, and now it's telling me I'm missing 9 fonts! I have to go out of town for a famiy emergency tomorrow and I need my laptop. I've searched and have no clue how to fix this. This is a headache I really don't need right now, so any help is much appreciated.
These are the missing fonts:
Bell MT Bold
BlairMdlTCTT medium
Book Antiqua Bold
Bookman Old Style
Bookman Old Style Bold
Cambria
Cooper Black
Mona Lisa Solid ITCTT
Big Caslon Medium
And honestly, I haven't tried uninstalling/reinstalling InDesign CC - is this possible?

Are you perhaps using Suitcase Fusion?
http://www.extensis.com/support/knowledge-base/suitcase-fusion-deactivates-fonts-synced-ad obe-typekit/

Missing Fonts InDesign 5.5 WIN

Similar Messages

Maybe you are looking for