Missing Frames after exporting a video with Premiere Pro cc

Hi guys, i was working on adobe premiere pro cc (342) at work, is the first time i use cc,
by the way, 40 minutes mp4 video(h264/aac,720p), a video of 100 clips,50 images(title image), fade in/out (each clip), and other stuff( all the clips are mp4).
i go for exporting in h.264/aac, maximum quality rendeing,and after a perfect exporting(premiere pro cs6 takes 7 hours, premiere pro cc takes only 25-30 minutes,shocking) i see that the exported video is fantastic, but some video frames are missing(the image/title stille remains there), and sometimes even the image/title disappear for some frames, sometimes il like a intermitted flashing.
i use mpe with my HD7970, is the first time i use it, and during the exporting my AMD FX8350 runs over the 90% of use, it's ok for me, but i want to use ppcc and exporting without problems.
can you help me?
sry for my bad english.

I've never seen an export come out with frames missing. Try turning of hardware acceleration.

Similar Messages

How to define the default thumbnail, appearing after exporting a video in Premiere Pro?

Hi community,
When I export a video in Premiere Pro, the default thumbnail (appearing in windows file explorer for example) is never the best.
At my job, I need to create a lot of video that I publish through a CMS. Every time, i need to reset the preview thumbnail of the video because the default one is not accurate.
How to define which frame of my video will be used as a preview thumbnail after the video is exported?

This is not something you can control with PP.

Please help. My audio track is too low after exporting movie made with Premiere Pro to YouTube.

Hello. My crew and I recently completed post-production on an independent film. We used Adobe Premiere Pro 5.0 for video and audio editing. We had a very low budget for production, so we didn't have the best audio equipment to record sound with. So in editing, we had to do quite a bit of sound mixing to minimize background/ambient noise and interferences/distortions caused by large electrical appliances in some indoor scenes, such as taverns and cafes. We managed to clean up the audio, and the audio ultimately sounded great. However, when we exported the film to YouTube, the entire audio track sounded low. To hear the film at an adequate level on YouTube, the volume has to be turned all the way up. I'm wondering what can be done to export the film to YouTube and maintain strong, optimal audio volume/quality. Any help would be greatly appreciated. Thank you and take care.

As Jeff of Safeharbor noted, you really need to check the audio meters in Prpro with your "final" project. I found that I could have a sound level that played fine on my computer, but ... on exporting to a DVD ... was way low and required a very high setting on any other computer or a tv to be able to hear. I hadn't actually looked at the audio meters. On checking them ... yeah, the peak was down about -18, the main content of the talking-heads was below that. After raising it with PrPro's audio tools, the sound was fine.
I'd bet your sound is showing low on the meters ...
neil

I'm having this message when I try to export my video from Premiere Pro: "Error compiling movie. Unknown error"

I'm having this message when i try to export my video from Premiere Pro:
"Error compiling movie. Unknown error" Do anybody knows what to do?

1st, I moved your message to the correct forum
2nd, More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
3rd, Error Compiling Movie... some past discussions and ideas
-http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html
-http://helpx.adobe.com/premiere-elements/kb/error-error-compiling-movie-render.html
-and nested sequences http://forums.adobe.com/thread/955172
-and WMV files frame rate http://forums.adobe.com/message/4629210

How can I reduce (or remove) camera shakes in a video with Premiere Pro CS5???

I want to reduce (or remove) camera shakes in a video with Premiere Pro CS5. Is there an build-in plugin I can use, or do I have to download / buy one? Thanks.

You didnt need to look very far down the page to see this...
http://forums.adobe.com/thread/619165?tstart=0

"Missing Codec" when importing QuickTime-Video into Premiere Pro CS5.5. What can I do?

Dear Adobe Community,
I tried importing a QuickTime-Video into Premiere Pro CS5.5, which did not work because there was a codec missing. What can I do now?
Thank you in advance for your helpful comments!
lots of love
Flora

Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

I am trying to export a video from Premiere Pro. I have both audio and video checked and the sequence is active but only the audio exports. There is no video at all. Can anyone tell me how to get the video to export. It was working fine until today.

Premiere Pro CC has been working fine until today. I have completed my sequence and it is active. I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate. I am choosing entire sequence. The audio exports but the video and title does not. Can anyone tell me how to troubleshoot this so I can complete this project? Please!

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Exporting to Vimeo with Premiere Pro CC?

Hello,
I've searched online for guides on how to properly export video for Vimeo using Premiere Pro CC (8.0.1), but have not had any luck. Does anyone know the proper settings? Apparently with other versions of PP there are presets for vimeo and youtube, but there aren't any with the trail version I am using.
thanks,

should look like this.

Exporting flash videos to Premiere Pro

I use Flash for animating photos and then export the movie as .mov and import the same in Premiere Pro. The final rendered video file (.mp4) from Premiere Pro after editing has the images shaking. Why is it so?
For animations to be imported in Premiere Pro, what is the best format to be exported in Flash?
Thanks,
Bhanu

If you want to have the best quality and an up-to-date PC you should go for png-sequence.
Import that png as footage in Premiere and you should get a sharp result

How do I export a video on Premiere Pro exactly as it is in my sequence?

I've only used Premiere Pro CS6 for a week so I'm fairly new to it. I just completed editing my first video but when I tried exporting it, the video didn't show all the clips I used in my sequence and/or had extra clips that I did not use.
This screeshot says that this video is 2 minutes 15 seconds long. Ok good. That's how long I needed it to be.
BUT HERE. The file says its only 1 minute and 4 seconds long and once I scrolled through it, I saw that it didn't have all the clips I used and instead inserted itself clips I DIDN'T use. This is a fan video so I used a large file as a source and used the input-output to grab clips and edit and added music and transitions. That's it.

You need the Work Area Bar to cover what you want exported.
You can see in your screen grab of the sequence...that the yellow tabs are short of the ends.
Drag them out to cover is one way.
In and Out points is another.
Entire sequence option is another
The options are in the Export Window.

Can Adobe After effects cs5 work with Premiere Pro CC

I have a project I created in Adobe Premiere Pro CS5 and updated to Maverick which cause Premiere Pro to crash constantly. I downloaded Adobe Premiere Pro CC and was able to reopen the file however all media edited in After Effects cs5 shows media offline even though I am able to open up After effects and access the media fine. Is there a way I can bridge them together. It seems the after effects media is still connected to Premiere pro cs5.

Dynamic Link usually only works with the same version (the same suite) of the software. You can render your AE assets into a production codec and replace the dynamically linked compositions with the rendered files.
Alternatively, install AE CC (and manually install the required 12.0.1 update to run on Mavericks) and resave the files in your CC version. (This will only work if you have a CC subscription, the update won't work on a trial version. When the 12.1.0 update is released, you will be able to run that trial on Mavericks.)

Missing audio track when importing video into Premiere Pro CS3

When I import my M2TS video into the editor there is no audio when viewed in the source. There is also no audio track when I drag a clip down to the timeline. Any fix for this?

I have the same problem with M2TS files in Adobe Premiere Pro CS4. The audio track is there - Adobe Premiere just doesn't recognize it. If you open the same clip in Nero Showtime, Corel Ulead VideoStudio, etc., the audio will be there. The audio is probably multiplexed.
I have been recording High Definition TV using the Hauppauge HD PVR 1212. About 15-20 % of the M2TS files recorded will be seen as video only clips by Adobe Premiere. The remaining clips will be conformed by Premiere and you will have a Dolby Digital 5.1 audio track. If you convert the video only clips to .MP4 and then re-import them into Premiere you will then have the Dolby Digital 5.1 audio track back and you're good to go.
I use either Xilisoft or Arcsoft media converters to change to .MP4 files. If you use Arcsoft you will have to render the clip. The files converted by Xilisoft don't have to be rendered for playback.

Can you export created videos from Premiere Pro Trial to youtube?

Is it posible to export a created video from a trial of Premiere Pro to social media networks such as youtube or vimeo?

Yes.
Mylenium

Exported HD video from Premiere Pro CS4 via Media encoder Freezes mid way through video

Hi,
I couldnt find this raised by anyone else so thought id start a new thread. Ive tried a couple of times to export an edited project only to find the video is all good up until roughly half way through the video at which point the video freeezes, the time keeps moving along as if its playing but no video. It looks like the encode failed at this point. I have no problems if I split up the video and export it in smaller pieces but obviously this isnt good enough
Any ideas as to the cause?
Additional info:
Im patched upto CS4.1
Source footage is AVCHD
Project goes for just over an hour
Cheers

That suggests some failure somewhere in the encoding process. It could be something in your timeline around 43 minutes, maybe a blank space (even for a single frame), a disk hiccup causing some part to go missing, other hardware problems. It could be a myriad of things going wrong. What background processes are running, what is your hardware setup, what are the temperatures during encoding, etc. Check the second part of this link: If you need help quickly...Guideline for posting an effective question

Missing H.264 export media option in Premiere Pro CC ?

Hello,
In Media Encoder, I can see the H.264 presets list but nothing in the Export dialog box ! H.264 choice is no more in my proposed list ?
Have you already experienced this and who knows how to solve it ?
Thanks by advance for your kind help !
Regards,
Samuel

I'm continuing my search and a lot of post are talking about this file C:\Program Files\Adobe\Adobe Media Encoder CC\txt\AddExporterList.txt
With the solution proposed, it's still not working.
My file is bellow. Can you please have a look on your side and copy me your file ? the list of exporter is the one that I have.
# MediaCore Plugins
ExporterAIFF
ExporterAVI
ExporterBMP
ExporterCIT
CITExporter
ExporterDPX
ExporterGIF
ExporterGIFStill
ExporterJPEG
ExporterCoreAudio
ExporterNULL
ExporterP2
ExporterPNG
ExporterQuickTimeHost
ExporterTarga
ExporterTIFF
ExporterUncompressed
ExporterWave
ExporterWindowsMedia
ExporterXDCAMHD
# MediaCore Plugin Formats. Syntax: ExporterName.ZeroBasedIndexToBlacklist
ExporterMPEG4.1
ExporterMPEG4.2
ExporterMPEG4.3
# AME Plugins
AudioWriter
WinMediaWriter
# AME Plugin Formats
MPEG4
H.264 Blu-ray

Missing Frames after exporting a video with Premiere Pro cc

Similar Messages

Maybe you are looking for