Missing Functionality:BP Properties not visible during Add

Have formatted search to determine a new
bp code based upon business properties, but the variable is not set.
Select $[OCRD.QryGroup1] always returns 'N' even if the the BP property
is set when in Add Mode. Tested with an existing bp record the variable
is set correctly.
Edited by: Robert Fernandez on Sep 9, 2008 7:56 PM

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Similar Messages

Enhancement not visible during runtime

Dear experts,
I have a problem with getting enhancements up and running in runtime.
I Changed 2 enhancements in FM J_1B_NF_VALUE_DETERMINATION and activated them. Activation goes fine, but for some reason during runtime (in debug mode), I can not see the code of the enhancement at all. My changes are not triggered, I can not even see the code in debug-mode. The complete code-block is missing. It seems that the enhancements are not active and are just not embedded during runtime. Do I have to activate something else? I guess CMOD and SMOD are not relevant in this case but if they are please let me know.
Thanks in advance
William

if you are usng enhancement framework then there is no need of CMOD/SMOD.
where have you created your enhancement spots? and what type have you given there?
goto SE19 and see what actually is the status of the enhancement .. if active, keep breakpoint directly inside your enhancement coding,
when FM starts executing, you will find a circular swirl(just on the left side of the code ), that mean it will goto your enhancement. it wont direcly show in the deugger, you press F5 and then it will go inside your code.

Outlook Integration menu not visible in Add-ons menu

Hi,
Outlook Integration doesn't work on one workstation after a recent upgrade to 8.81 PL05.
It's Windows 7 32-bit with Outlook 2010.
Add-on seems to be successfuly installed and it appears to be connected in Add-on Manager, however the Outlook Integration menu (Default Settings, Company Settings, Define Snapshot Templates) is not visible in SAP. User has full authorisation and the menu doesn't appear in Form Settings to make it visible.
After a while there is a message box saying that Outlook Integration has disconnected and it asks to reconnect Add-on, continue without the Add-on or log off company.
I tried to uninstall and re-install the add-on, but it made no difference.
Any suggestions?
Thank you!
Cristina

Hi,
I uninstalled and re-installed SAP Client on that workstation and Outlook Integration was successfully installed.
Cristina

ITunes 12: Buttons missing in dialog boxes (not visible)

Hello.
Since using iTunes 12 (in my case: German version) buttons like YES/NO or OK/CANCEL are not shown in smaller dialog boxes when iTunes wants to interact with the user and asks question whether to do this or to do that.
The buttons are just not visible, the boxes are too small and they cannot be resized (= fixed size). I think this could be due to longer German texts in the dialog boxes compared to the English language version.
The buttons are there but cannot be seen or clicked.
Screen resolution is 1920x1200 and text zoom factor is 100% in Windows 7. Window size for these dialog boxes seems to be hard-corded and due to line breaks and longer texts in German the YES/NO buttons seem to get an unexpected carriage return moving the buttons out of the visible area.
Please fix this!
Kind regards,
Argentinos

Example: here a part of the buttons is visible but in many dialog boxes they are completely cut off.

Hard Drive not visible during install.

I recently tried to turn on my G4 and got just a white screen. So I assumed it was the hard drive. I installed a new Hard drive. Put in my Leopard disk and the drive is not visible. I went into Disk Utility to format it, if needed. It was not visible there either.
Out of suspicion, I plugged in the old HD into a different mac via USB and my data is there and visible.
What could the problem be? I went back and double checked all of the cables.

I know it's a pain to take out just to test, however, did you plug the new drive into the other system via USB to see if it's recognized also?
Usually in this situation, it's a cable problem. Either a cable is not seated completely, or in rarer cases, there's a problem with a cable itself. Since the old drive is visible to the other system, you may have another issue going on, like a logic board problem. I'd want to run the Apple hardware test. On the gray OS X system CDs that came with your system, find the one that says 'AHT Version x.x', insert it, reboot, and choose the extended test when prompted. Either of the TechTool programs can do similar testing.
By the way, your sig says you have Snow Leopard 10.6.3 installed, which is impossible on a Powerbook. Leopard 10.5.8 is the last operating system release available today for Powerbooks.

Real player extension not visible in add ons in firefox 21

the real player down loader is no longer visible in videos in you tube asnd other video sites the add ons in the fire fox tool does not have the real player add ons visible although i have the latest version of real player installed and it works fine with IE. Could someone please help me fix the problme it was working fine till yesterday. It is irritating

Solved the whole Real Player-Firefox issue. Simply go your control panel, select "Programs", under "Default Programs" click on "Change default settings for media or devices". Find Video Files and choose Real Player logo to Import Music, Video and Pictures using Real Player. Click "Save" at the bottom of the window, then closeout and restart Firefox. You should see the "Download this Video" icon in YouTube videos once again and download at will. One caveat, it seems to work great on amateur videos and the like. I had an issue downloading some music videos. It's kind of hit or miss, you will have to keep trying to download a video if it doesn't work initially. I noticed that it downloads videos as a .dash file and then Real Player downloader will convert the file to mp4 or whatever format you have it set to in your preferences. These directions are for Windows 7, you will have to find the equivalent control panel options for other Windows OS. Good luck!

Satellite P870-335 - Function key actions not visible

Hi
I have a P870-335 in which I placed a SSD disk and installed Windows 8 Pro (now 8.1) and was able to get most devices working with the drivers that I found by the Toshiba autodetect program.
However one of the items still missing is that I can not see/control the functions that are on the Function keys, (like swichting Bluetooth/Wireless). I know from my previous Toshiba laptop that at the moment I press the Fn key I see a OSD that show me the options and the status of them.
I cant find which software I have to install in order to restore this functionality. Somebody got a hint/link for me?
Assume that this software is also available for Windows 8(.1) Pro?
Thanks in advance, Herbiek.

Hi Keany,
I already had found that option because I would like to use directly the standard F1/F12 functions and not the special functions (as default setting by Toshiba). When I want to change for example brightness I now press Fn+ F2 (brightness down) or Fn + F3 (brightness up).
The Fn+ F12 key nicely toggles the WiFi on or Off. I now understand that the way Toshiba displays this is not the same as with Windows 7?
However I still have difficulties on how to switch on/off Bluetooth, that in my memory was done using the same functionkey (+Fn) ? I can't get it on.
I there someone who can tell me? At the moment I only see 2 states when toggling with Fn+ F12, WiFi on or WiFi off.

Missing Function - Aging Report not match in System Currency in SBO 8.8

Dear all,
Version: (Please provide the current version)
SBO 8.8 Patch: 10
Description of requirements: (Please provide a detailed description)
In mentioned patch level, the result/outstanding balance of Aging Report in System Currency was difference when selected 'Display Reconcilied Transactions' or not. The outstanding balance should be be same on both selection.
Valid as of: (Date that this legal requirement is applicable)
N/A
Business needs: (Please describe the impact on your business, if the functionality is not realized)
If the Aging Report cannot disppay the outstanding documetns for reconcile with customer, they cannot check with customers.
Examples: (Please describe a typical example, how the functionality should work.)
Generate the Aging report in System Currency
selected 'Display Reconcilied Transactions' including all transactions and balance is same as Trail Balance
un-selected 'Display Receoncilied Transactions' does not inclding the transactions that Local Currency is zero amount, but System Currency is not zero. The outstanding balance is different to the result of the above selection and Trail Balance as well.
Current Workaround: (Please describe the workarounds you are using at the moment)
Print the Aging Report with selected ' Display Reconcilied Transactions' to show ALL transactions to reconcile the transactions.
Proposed solution: (Please suggest how the new functionality should work)
selected 'Display Reconciled Transactions' or not, the outstanding balance should be the same.
Best regards,
Michael

Bapi's do not set sy-subrc. The only way to check if it was succesfull is to loop into the return table for error messages:
You have to use BAPI_TRANSACTION_COMMIT after calling BAPI_PO_CREATE1:
    READ TABLE errmsg TRANSPORTING NO FIELDS
                        WITH KEY type = c_e.
    IF NOT sy-subrc IS INITIAL.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = c_x.
ENDIF.

Entered Numbers Not Visible During Entry

Have a oddity on my Mac: If I try to type in values for the sliders in the Develop module, they dissapear duing entry.
1. Click on an enterable area for a slider. The text highlights.
2. Type in a value. Value is still visible.
3. As soon as the slider moves to the entered value, the text dissapears. It looks like it changes to the normally displayed gray value.
4. Tab out or click outside the area and all goes back to normal.
Mac Pro Nahalem dual 2.93, 16gb RAM, 10.6.8, ATI 4870 512mb
Jim

i note the same problem on the exposure field entry. imac,lion.
it is distracting and correcting one's errors in this regard requires some effort.
vince

NOKIA N85 NOT VISIBLE DURING SUNLIGHT

i have a nokia n85 smartphone. During sunlight, it is difficult to see anything. i put the light sensor to maximum but no result. can any one help me solve this?

sorry, but it's a common issue, nokia's n85 and n86 are performing poorly in direct sunlight, that's just the way oled goes. altough the technology was designed for better clarity and contrast, it lacks on readability under strong lightning. the best thing you can do is set your phone on either a really darkish theme, or on a really bright one, it might help. however, there is a version of the n85 shipped since june 2009, which seems to comport better on direct sunlight. is that the one you have? if not, you might consider it.
If, from time to time, I actually give a good advice, please click on the Kudos icon, I have cookies and free hats!

List of data targets is not visible during data upload

Hi all,
I am trying to load user defined transactional data into an info object, i will do all necessary customization steps such as creating application component,assiging data sources,creating info packages and then creating update rules in info cubes, moreover i wrote a routine which calculates sales reveune based on cost and quantity sold.
My problem is that when i created infopackage , it does not list any data targets, Plz any one can give tips in this regard.
thanks in advance
regards,
a.fahrudeen
Message was edited by:
FAHRUDEEN MUSTAFA

Hi Fahrudeen,
Am a little confused here... you say you want to load Transaction data and load it into the InfoObject?? what was that??
You can load the Transaction data only into your data targets such as InfoCube and DataStore Objects... If you are loading the data into your InfoObjects, then that would mean that you are loading the Master data for which obviously you won't have your data targets listed in your InfoPackage... Only in case of loading the transaction data would you have your Data Targets listed in your InfoPackage...
Regards
Manick

Insecurity of Keychain Access: "secure" notes visible during authentication

Sorry if this has been discussed before, but I'm not keen on wading through 137 pages of discussions.
I recently discovered Keychain Access' ability to create "secure notes," and thought this would be a wonderful way to keep my serial numbers, bank accounts, and other sensitive information secure.
However, I just tried to actually decrypt this information for the first time, and was rather shocked. When you attempt to open a secure note, and select the "show note" checkbox that prompts the "Deny / Allow Once / Always Allow" dialog box, the dialog box contains the "secure" information from the note!
In my example, which you can see here (http://www.justinreese.com/media/images/secure_bbedit.png), the entire text of the note is included in the dialog, previous to any password authentication. Of course, because I'm reusing the login keychain, I understand that it's already been decrypted upon logging in; however, I was under the impression that using Keychain Access to store secure notes and other passwords offered a secondary level of protection, and that even if someone were able to compromise my system while I was logged in, at least that sensitive data would remain secure (the way a dedication application such as Wallet or Yojimbo would do it).
So... is this a bug, an oversight, or simply my own poor planning in using the login keychain to store secure information?
Thanks to all.
17" Powerbook G4/1.5Ghz Mac OS X (10.4.6) Stock + 1GB of RAM
17" Powerbook G4/1.5Ghz Mac OS X (10.4.6) Stock except 1.5GB of RAM

My suspicion is that when you created the note, in the "name" field, you used "paste" intending to paste "BBEdit 8 Registration". However, if the clipboard at the time had contained multiple lines, the "Name:" field would then contain the entire contents (Owner Name, Email Address, etc), although it might not be immediately apparent since the main "Keychain Access" window would only display the first line. However, when asking for authentication, the full "Name" is displayed. This scenario is easy enough to replicate.
The odd thing is that even if the "Name:" is subsequently edited to remove the extra lines, the "authentication dialogue" seems to continue to ask for authentication using the "old" name... it's probably being cached somewhere but I haven't been able to track it down.
So in this case, I would call this "user error" for putting "secure" info in an "insecure" field in the first place, but there is definitely some sort of bug / oversight / slopiness in that the authentication dialogue doesn't update - so in effect it is asking you to authenticate for one thing, when in reality it is authenticating something that might have a completely different name. That sort of thing might open up "spoofing" opportunities, but for a user's personal keychain, I would suspect that anyone that can get close enough to do something with it would have opportunities to do far worse. Still, it can't be a good thing...

My text messsage is not visible during my program works

I have write a programm, to write a file format in an other.
The files are so big that the programm work very long. So I made a text message that show the program is still working.
In the beginning was working well. But now the text messages is no longer displayed.
I have no idea what the problem is.
some code:
int CVICALLBACK ReadCallback (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2)
int iConfiguration;
switch (event)
case EVENT_COMMIT:
SetCtrlAttribute (panelHandle, PANEL_TXTMSG_Load, ATTR_VISIBLE, 1);
GetCtrlVal (panelHandle, PANEL_Dataset_Conf, &iConfiguration);
Function_Worker(iConfiguration);
SetCtrlAttribute (panelHandle, PANEL_TXTMSG_Load, ATTR_VISIBLE, 0);
break;
case EVENT_LEFT_CLICK:
break;
return 0;
The function_worker does made nothing with the GUI but it works with a DLL. Is this a problem?
Do you have any ideas?
Solved!
Go to Solution.

Somewhat more elaborate I'd suggest to modify your code as follows:
case EVENT_COMMIT:
    SetCtrlAttribute (panelHandle, PANEL_TXTMSG_Load, ATTR_VISIBLE, 1);
    ProcessDrawEvents ();
    GetCtrlVal (panelHandle, PANEL_Dataset_Conf, &iConfiguration);
    Function_Worker(iConfiguration);
    SetCtrlAttribute (panelHandle, PANEL_TXTMSG_Load, ATTR_VISIBLE, 0);
    break;

Properties not Visible in MAX

I'm working on a PC that isn't connected to the Internet so it may be an old version of MAX.
I have a NI-2627 switch that I need to change the topology of from 32x2 to 64x1. When I open MAX and right-click on the card, the only options I get are: Save, Rename Alias, Delete (greyed out), and Open VISA Test Panel.
Version is 4.6.2f1
How do I change the topology of the switch if I can't get to it in MAX? Thanks.

Hello Erin,
Welcome to the NI Discussion Forums! Like you said, there should be an option called “Configure” in MAX when you right click on the card.
However, please remember than you can configure it programmatically with the “niSwitch Initialize with Topology.vi”
I Hope this helps.
Regards,
Daniel REDS
RF Systems Engineer
Help us grow.
If a post solves your question, mark it as The Solution.
If a post helps, give Kudos to it.

Contact names not displaying during calls, but only in logs

Many names in the address book not showing up
Hence, when i get a call or make one, the name doesnt come up with the number
after the call, the number with the name is visible in call log as outgoing or incoming or missed
in the database details it shows my address book having 238 numbers (these are the numbers currently visible)
so how is it that the names are visible in the log and not in the address book and also not visible during a call
Please help
(a search for this topic hasnt got me the correct results)

Same thing happened with mine! Still haven't figured it out, but **bleep** it's annoying!

Missing Functionality:BP Properties not visible during Add

Similar Messages

Maybe you are looking for