MISSING FUNCTIONALITY-The field "VatIdUnCmp" is not exposed in DI API & DTW

The field "VatIdUnCmp" (Unified Federal Tax ID) is not exposed by the
DI API and therefore not available in DTW.
This is a missing functionality.
In order to have this non-legal requirement, as request in the note 1028874, I send this development request
Thanks for your cooperation.
Fabio Fambrini

Maybe check here:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c5f5dbcc-0a01-0010-5d82-f25f2bee715e
HTH,
Frank

Similar Messages

  • IT 34 corp functions, the field  Corporate Function (FUNKT)

    Dear friends
    IT 34 corp functions, the field  Corporate Function (FUNKT)is a required field, trying to make it optional or hide, but system saying in the both cases -- 
    Entry  E 0034 does not exist in T591S (check entry)
    I want that field either an optional field, or to hide what to do
    Regards
    Kiran

    Hi Kiran,
    This is because FUNKT field is the subtype field for IT0034 and no blank subtype is defined for the infotype.
    Please go to SM30 - V_T591A - for infotype 0034 create a blank valued subtype. (subtype field should be blank)
    Then your issue will be resolved.
    Regards,
    Dilek

  • I set iCloud up last week and the next day when out in the field I could not get Outlook to open up.  I want to change my settings so I can get mail at home or in the field

    I set iCloud up last week and the next day when out in the field I could not get Outlook to open up.  I want to change my settings so I can get mail at home or in the field, not just when i'm at home.  I have a PC and fios internet with Verizon at home.  I have a Sprint air card in the field or access an available wifi.  I want to change my settings to allow for receiving email in the field.  What's the point of an air card and icloud for backup fi it doesn't work in the field for some odd reason?

    Apple - Support - Mail Setup Assistant

  • Crystal Report Windows Forms Viewer error: "The field name is not known"

    Hi,
    My report runs fine in the Crystal Reports viewer.  When we try to view the crystal report through a piece of 3rd party software, I start to get errors in a few of my formulas indicating that "the field name is not known".  I can clearly see that the field is in my crystal report.  Has anyone else had this problem?  Any ideas on what might be happening?
    Thank you.

    Just to provide some further clarification on my problem:
    The "field name is not known" error seems to be occurring only in a few formulas where I have a statement like this:
    if ISNULL({somefieldfromdatabase}) Then
    I've used this for many other formulas and not had an issue with them.  I've verified that the database and the stored procedure contain this field.

  • The field name is not known error

    Hi,
    I have a report that is pointing to database(db1).
    Can i change the database name to database(db2) in my c# application?when i am changing to new database name in my application i am getting error as "field name is not known".
    Please give some suggestions.
    Thanks in advance

    I'm having the same problem.
    I've upgraded from Crystal 8.5 to Crystal XI.
    I've converted all my reports from Crystal 8.5 to Crystal XI.
    When I try to run the report I get the error:
    The Field Name is not known and nothing else.
    I did upgrade the report and verified the database.
    Does anyone have any ideas ?
    If I delete the formula, and after I create it (by handle) the report will good.
    But I have about 1000 reports !

  • Newly-added field  missing in the field catalog  for NR00

    I  am about to creat condition record for condition type NR00 free goods . I need to make some customizing to meet our requirement .So  I changed  the field catalog for the condition table by adding a new field BWAST  (purchasing document type) . After that I am going to creat a new condition table 501 with this newly-added field ,but I can't find the field in the right part for field catalog .
    Can you give me some advice ?   Thank you in advance.

    I 've got the answers ,  
    Note 21040 - Allowed Fields not appearing for condition table
    thaks

  • Sales order number not exposed in Production Order DTW Template

    Dear all,
    Sales order number field(ie., OrginNum) is not exposed in dtw template of oProductionOrder,
    As we need to update sales order number manually linked with production order after uploading prodn .orders thru DTW.
    We are using DTW Version 2005.0.18 API Version 6.80.320
    Whether this issue is solved in latest 2005 B versions ?
    Jeyakanthan

    After analysis,We should enter sales order DocEntry on field ProductionOrderOriginEntry.

  • Field DLN1.OpenCreQty not disposable via DI API

    Hello,
    I don't find the field in the subject.
    Isn'it present or does it have another name?
    I have to obtain only the Open Qty net from Return.
    How is it possible?
    Thank you
    Andy

    Maybe check here:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c5f5dbcc-0a01-0010-5d82-f25f2bee715e
    HTH,
    Frank

  • PDF file opening with blank fields - the field values are not populated.

    Recently, our users have been facing this issue, "data not populating in the PDF fields".
    We are using FDF in PHP to load the PDF templates and apply the data to the PDF fields. This works fine on many adobe versions but showing empty fields in few adobe versions. For e.g It worked fine with Adobe Reader 10.1.3 but did not work in 11.0.
    This has been critical now as it is showing empty fields in IE11. Can you please help me overcome this issue.
    Thanks!

    All I can suggest is to try the latest Reader versions, i.e. 10.1.11 or 11.0.8.

  • Why in the levels box, "OK" is missing in the layers side, but not in the other?

    I have used several past versions of Elements.  The past Levels control had an OK Button to use when I was done with the adjustment.  Elements 9 does not have the OK button on the layers side, but does have it using the Enhanse drop down menu or Ctrl L.  How can I finish setting the levels control with no OK button on the layers side on the right?.  It was much easier before when they both had OK buttons to use when I was finished. Does anyone know why it was left out.  I can't find an answer in any tutorial.

    Thanks, You are correct.  It was much more user friendly before when both LEVELS dialoge boxes were the same.  The only button on the adjustment layer side now is AUTO, where we used to have OK,  Cancel, Reset, and Auto. These were all nice one click functions before where now it is two or more. What is the advantage to me to have to go to a drop menu now to reset or close.  To cancel  an adjustment, it appears I have to go to the reset tab and then the close tab or scroll through my adjustment layers and then right click on that layer and releae on Delete Layer.  IMO, not better
    For some reason the programmers have to keep earning there pay by moving things to different locations from revision to revision and we have to hunt for them.  I have never found a section of a new release saying, "We have moved this and this action item to a new location or drop menu to keep you on your toes.  Good luck in getting used to where it is now."   By the way, Elements 2.0 is the first one I started with and I have taken five different Elements courses in the local school.  The teachers don't like the confusion each revision makes either.

  • How to clear the form fields which are not rendered

    I have a creation form. There is a document_type list set up as a partial triger. When user change the document type, only the filed related to that document type will be rendered. This caused a problem when we need to clear the form . The input in the field which is not render won't be cleared when reset button is pressed. Can anybody give a sugestion on how to handle this?
    I tried to use the following function to clear the fields. It does not work since it get the list value before the list value change and clear the fields after the new field rendered.
    public void clear_action(ValueChangeEvent valueChangeEvent) {
    // Add event code here...
    System.out.println("test1");
    String coutcase = null;
    if(EL.get("#{bindings.Proxy.inputValue}") != null){
    coutcase = EL.get("#{bindings.Proxy.inputValue}").toString();
    System.out.println(coutcase);
    AttributeBinding a11= (AttributeBinding)getBindings().getControlBinding("INT_FNAM");
    AttributeBinding a12 = (AttributeBinding)getBindings().getControlBinding("INT_LNAM");
    AttributeBinding a13 = (AttributeBinding)getBindings().getControlBinding("TIT_PROG");
    AttributeBinding a14 = (AttributeBinding)getBindings().getControlBinding("T_OF_INT");
    AttributeBinding a15 = (AttributeBinding)getBindings().getControlBinding("NETWORK");
    AttributeBinding a16 = (AttributeBinding)getBindings().getControlBinding("IN_DATE");
    AttributeBinding a17 = (AttributeBinding)getBindings().getControlBinding("PE_FNAM");
    AttributeBinding a18 = (AttributeBinding)getBindings().getControlBinding("PE_IN_LNAM");
    AttributeBinding a19 = (AttributeBinding)getBindings().getControlBinding("WEBSITE");
    AttributeBinding a20 = (AttributeBinding)getBindings().getControlBinding("URL");
    AttributeBinding a21 = (AttributeBinding)getBindings().getControlBinding("INT_DATA");
    AttributeBinding a22 = (AttributeBinding)getBindings().getControlBinding("D_ACCESS");
    AttributeBinding a23 = (AttributeBinding)getBindings().getControlBinding("CASE_NUM");
    AttributeBinding a24 = (AttributeBinding)getBindings().getControlBinding("COURT");
    AttributeBinding a25 = (AttributeBinding)getBindings().getControlBinding("PLAIN");
    AttributeBinding a26 = (AttributeBinding)getBindings().getControlBinding("DEFEN");
    if(coutcase.equals("Interview")) {
    a11.setInputValue(null);
    a12.setInputValue(null);
    a13.setInputValue(null);
    a14.setInputValue(null);
    a15.setInputValue(null);
    a16.setInputValue(null);
    a17.setInputValue(null);
    a18.setInputValue(null);
    /*a19.setInputValue(null);
    a20.setInputValue(null);
    a21.setInputValue(null);
    a22.setInputValue(null);
    a23.setInputValue(null);
    a24.setInputValue(null);
    a25.setInputValue(null);
    a26.setInputValue(null);*/
    } else if(coutcase.equals("Internet")){
    /*a11.setInputValue(null);
    a12.setInputValue(null);
    a13.setInputValue(null);
    a14.setInputValue(null);
    a15.setInputValue(null);
    a16.setInputValue(null);
    a17.setInputValue(null);
    a18.setInputValue(null);*/
    a19.setInputValue(null);
    a20.setInputValue(null);
    a21.setInputValue(null);
    a22.setInputValue(null);
    /*a23.setInputValue(null);
    a24.setInputValue(null);
    a25.setInputValue(null);
    a26.setInputValue(null);*/
    } else{
    /*a11.setInputValue(null);
    a12.setInputValue(null);
    a13.setInputValue(null);
    a14.setInputValue(null);
    a15.setInputValue(null);
    a16.setInputValue(null);
    a17.setInputValue(null);
    a18.setInputValue(null);
    a19.setInputValue(null);
    a20.setInputValue(null);
    a21.setInputValue(null);
    a22.setInputValue(null);*/
    a23.setInputValue(null);
    a24.setInputValue(null);
    a25.setInputValue(null);
    a26.setInputValue(null);
    }else{
    System.out.println("coutcase is null");
    }

    Hi,
    The easiest way to modify the screens in the Std transactions using ITS is to modify the ITS templates corresponding to that transaction.
    E.g In you case,there will be a ITS service corresponding to the ESS transaction.This ITS service will have  number of HTML templates which will actually correspond to the diffrent screens in the Trascn.What you need to do is find out the HTML template in the ITS service which corresponds to the screen(which you want to modify) in the STd transacn.To do this ,the easiest way is to right click on that Web page and say VIEW SOURCE.It will show you a HTML code with the ITS service name and the template which is being used for that particular screen.
    So after you find out the correct HTML template to be modified,you can simply hide the fields by putting the HTML code lines in between the symbols
      <!   and  -->
    BR,
    Disha.
    <b>Pls reward points for useful answers.</b>

  • Field ZZBUDAT is delta-relevant, but does not exist in the field list

    Hi All,
    I have created a Generic DataSource on a View.Now there is a situation ,i need to add a Date field form some other table.
    So i have enhanced the datasource now that date is coming in my datasource.
    But when i tried to make delta on that date field its showing error-
    Field ZZBUDAT is delta-relevant, but does not exist in the field list
    Message no. R8279
    Diagnosis
    The DataSource uses field ZZBUDAT for specifying the delta. In the DataSource field list, however, the field does not occur
    Now how i can make this field dalta relevant?
    Thanks,
    Piyush

    Piyush,
    I think the message in SAP is quite clear....
    If the field ZZBUDAT does not exist in the view ... how do you expect the datasource to know which records have changed...?
    The delta relevant field SHOULD be in the view - else there is no way the extractor can identify the changed records ...
    Please remember that the Generic extractor is a simple select statement with a where clause on the delta relevant field and nothing else ... if you want the changed on field to come from another table - then you need to write a function module extractor to do this...
    The order of processing is that - the view fields are processed first - then the enhanced fields are processed followed by the user exits...

  • Value '61218XZEF ' from field ANZVERTR is not convertible into the DDIC

    Hi All,
    I struggling with this error can anybody pls help me.
    <b>Value '61218XZEF ' from field ANZVERTR is not convertible into the DDIC
    data type DEC in data record 1 . The field content could not be  transferred into the typed transfer structure.</b>
    This is occuring only in Prod, i have tested the same in Dev & QA but i didn't get this error.
    here the R/3 field ANZVERTR of type DEC length 6 is assigned to infoobject 0UCCNTRCNT of type DEC length 17 ( data element /BI0/OIUCCNTRCNT).
    i dont think its a problem right coz the infoobject has same type and larger size.
    i have another 3 fileds with the same problem.
    Is it a problem in BW or probelm in data being uploaded from R/3 side. coz the hasn't received in BW yet. the error says " The field content could not be  transferred into the typed transfer structure"
    Even i have PSA in parallel but data hasnt even came to PSA.
    when i check job overview in R/3 i saw a msg " Function module /BI0/QI0UC_SALES_STATS_020001 does not exist"
    when i checked this FM with other guy( coz i dont have access) it is there and is active.
    Pls anybody help me.
    Regards
    Robyn.

    Hi Arvind,
    That filed is a keyfigure coming from standard datasource 0uc_sales_stats_02 it  uses various different tables, iam not able to figure out where is it comin from.
    Is it sure that the problem is in R/3 side???
    if it is a problem in BW at least that data should have come through to PSA right??
    keyfigures coming from std. datasources goes through various extraction programs, its not field to field mapping from R/3 to BW in case of key figures i guess. correct me if im wrong.
    Regards
    Robyn.

  • Field avaialble in field catalog but not when I try to create the condition

    Hi,
      I wanted to add a new table to a delivery output. I need the fields delivery type/ship point and destination country. I could see that destination country (LAND1) is not available in the field catalog. I added it from the list of available fields (in KOMKBV2) and can see it in the field catalog but not when I try to create the condition table. What else do I need to get this field ?
    Regards,
    Hari.

    Also add your new field to structure KOMBZ
    If you want to use a new field in the field catalog, you must add the field to KOMP or KOMK in the following INCLUDES:
    - header data in INCLUDE KOMKAZ in KOMK
    - item data in INCLUDE KOMPAZ in KOMP
    When you use INCLUDES, the field is automatically added to KOMG and the field catalog.
    The routines for assigning values to the new fields in order processing are found in member MV45AFZZ. Use the following user exits:
    - USEREXIT_PRICING_PREPARE_TKOMK (header fields)
    - USEREXIT_PRICING_PREPARE_TKOMP (item fields)

  • This field name is not known. on the server

    I have an issue using RPT file to generate a report using my .NET web app on the server, locally the report is generated fine, but on the server it's giving me the error "The field name is not known":
    [COMException (0x80041019): This field name is not known.
    Details: errorKind
    Error in File FormListAddons {74708A80-A1B6-494F-A141-C83C61F45047}.rpt:
    Error in formula Object_Visibility:
    '{visa_clients.addon1} = ""'
    This field name is not known.
    Details: errorKind]
      CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) +0
      CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) +362
    [FormulaException: This field name is not known.
    Details: errorKind
    Error in File FormListAddons {74708A80-A1B6-494F-A141-C83C61F45047}.rpt:
    Error in formula Object_Visibility:
    '{visa_clients.addon1} = ""'
    This field name is not known.
    The line mentioned above causing the error, is a script on crystal report to suppress the field if this condition is met:
    {visa_clients.addon1} = ""
    My PC is running Crystal Report version 11, however the Crystal Report runtime on the server running the version 10.5.1.0
    Both locally and on the server, i'm using the same datasource. Even locally i'm connecting the database on the Server.
    I would appreciate your help.

    It seems i'm posting in the wrong forum, please guide where can I post this question, to find someone who could have experience with Visual Studio and Crystal Report.
    I have 3 RPT files on my project, 2 generated successfully, only one is failing, because i'm using a script on the RPT file to suppress a field if the value is null or empty.
    So the statement of Crystal Report version 11.x not working with SQL Server 2012 is totally out of the subject.
    here is my code, for someone who knows how to read it:
    CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
    System.IO.DirectoryInfo TemplatesPath = new System.IO.DirectoryInfo(System.Web.Hosting.HostingEnvironment.MapPath("~/rptTemplates"));
    string templateFile = TemplatesPath + "/" + "FormListAddons.rpt";
    rpt.Load(templateFile);
    var table = dbmgr.listClients(in_group_id);
    rpt.SetDataSource(table);
    System.IO.DirectoryInfo FilePath = new System.IO.DirectoryInfo(System.Web.Hosting.HostingEnvironment.MapPath("~/UserGeneratedReports"));
    string FileName = "FormList_" + in_group_id.ToString() + ".pdf";
    if (System.IO.File.Exists(FilePath + "/" + FileName))
    System.IO.File.Delete(FilePath + "/" + FileName);
    rpt.ExportToDisk(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat, FilePath + "/" + FileName);
    rpt.Dispose();
    rpt.Close();

Maybe you are looking for