Missing "Get" Button - Win7 64-bit, iTunes Trailers section
I've tried posting this issue in the QuickTime forum without any luck, so figured I'd give it a shot here. I'm using the latest version of iTunes and Quicktime on Windows 7 64-bit. The "Get" button has disappeard from the Movie Trailers section of iTunes. Normally I'd avoid this section altogether, but I was forced to it by the dreaded "Error 47" at trailers.apple.com.
This seems to be a 64-bit specific issue, as it does not occur on any of my 32-bit machines (XP / Win7).
Any ideas?
Not an Apple engineer myself, so I'm not privy to the precise whys and wherefores of why it's like that, I'm afraid. But if you removed the 32-bit componentry, iTunes wouldn't run on any Windows system (32-bit or 64-bit).
Might be best to check in at the iTunes for Mac community for details on to what extent iTunes for Mac is still 32-bit (if at all) for any of the newer Mac OSes. Here's a link through to them:
https://discussions.apple.com/community/itunes/itunes_for_mac
Similar Messages
-
How do i get my PC 64 bit iTunes program to access my live internet browser?
How do I get my PC 64 bit, iTunes new downloaded app to access my 'live internet connection via my browser?'
You will need an application like Airfoil for Windows to be able to stream any audio source on your PC to the AirPort Express.
Rogue Amoeba | Airfoil for Windows: Wireless Audio Around Your ... -
Numerous attempts at a clean install of iTunes have failed. I am running Win7 64 bit on a Toshiba L series Satellite w/8G RAM and 100 G HDD space. Error message was (-42404), but following a complete (recommended) uninstall am now getting "Error 7". The prior uninstall included the establishment of administrator rights to files and folders left in the Apple folder after running the uninstaller, and successfully removing ALL visible and hidden Apple files and folders.
Any other suggestions out there folks?On Oracle Metalink site, there are many documents which says that Oracle 32 bit software works on 32 bits OS and 64 bits software works on 64 bits OS. Official support is only in those combination....
So there is no good way to help you in your case-XE is 32 bit application with hard codded compiled libraries which most of them would not work on 64 bit OS.
Sorry
8(
Hope this helps -
ITunes 10.5 update Win7 32 bit Error 5?
iTunes 10.5 update Win7 32 bit Error 5?
Changing the localization option simply changes the labels and folders iTunes will use for new content. Existing connect properly connected to the library should remain connected. If you've got files that are missing in action, ie. display with an exclamation mark, then they need to be relinked to the library before they can be transferred to your devices.
The default location for a Movie or TV Show also varies according to whether or not the library is in the new "iTunes Media Organisation" layout. Movies used to be lumped into a single folder, but now each get their own. I have a script called FindTracks that can search a media folder in either new or old layout and attempts to reconnect missing items. It currently assumes the US naming for Movies and TV Shows, though I guess I could tweak it for the alternate names if it would be useful. How many files are you trying to reconnect?
tt2 -
ITunes Win7 64-bit won't open older library
Updated iTunes on Win7, 64-bit laptop and it now won't open ... posts an error message of "can't open library file created with older version". I performed the upgrade on my XP-Pro 32-bit laptop with no issues, and a clean upgrade/update of my iPhone. Can't get it to work on the Win7 64-bit machine and, yes, I did indeed download the correct version of iTunes for Win7, 64-bit. I'm thinking the older version on the Win7 machine was not kept up and got too old to upgrade ... is that a possibility?
Just tried this after itunes crashed consistently - wouldn't open.
NOW I can sign the license agreement but get the message : "The iTunes library .itl file cannot be found or created. The default locatioin for this file is in the iTunes folder in the Music folder.
I can do a search for the most recently saved .itl iTunes library (from 10/18, sigh). But I can't figure out where to put that once I find it.
Any help? Thanks! -
hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit, the computer recognizes the phone but itunes sais i need 64 bit itunes. please is there something im missing... thanks
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
I've searched the net , and I've noticed a lot of people seem to b having this same problem. I've tried everything I can think of. I'm out of options and getting rather annoyed with apple. Please help me! I think I've given all the info needed about my operating system. Windows 7, 64 bit, iTunes 10.3. I've erased everything re-installed it, no joy; removed again and downloaded QuickTime and iTunes separately, no good; I've removed and re-installed numerous different ways, numerous times and nothing works. All of the apple programs that are installed with iTunes have this same error. Ive been messing with this for over 2 weeks! Any help would be appreciated, especially if it works!!!!
I've searched the net , and I've noticed a lot of people seem to b having this same problem. I've tried everything I can think of. I'm out of options and getting rather annoyed with apple. Please help me! I think I've given all the info needed about my operating system. Windows 7, 64 bit, iTunes 10.3. I've erased everything re-installed it, no joy; removed again and downloaded QuickTime and iTunes separately, no good; I've removed and re-installed numerous different ways, numerous times and nothing works. All of the apple programs that are installed with iTunes have this same error. Ive been messing with this for over 2 weeks! Any help would be appreciated, especially if it works!!!!
-
When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?
http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent -
I just downloaded the latest update for iTunes this morning, and now I am getting a message saying that iTunes can't start because MSVCR80.dll is missing from my computer. What the heck happened?
Troubleshooting issues with iTunes for Windows updates - MSVCR80
-
When downloading iTunes I get error message that msvcr80.dll is missing. I can't uninstall iTunes. How do I fix the problem?
You have to uninstall everything! Check out Turingtest2 remarks
https://discussions.apple.com/message/24652557#24652557 -
IPod can't connect with iTunes-keep getting install 64 bit iTune message
When I connect my iPod Touch to the computer and try to sync with iTunes, I keep getting the message that I have to uninstall the 32 bit iTunes and install the 64 bit iTunes. We've already done this and it won't recognize either the iPod or the iPad. HELP, please!!!
honestly on a Windows I do not know how, there are programs that you can download that will tell you, and there are unix scripts that can tell you. to find out how, you might want to talk to somebody who owns a windows and is proficient in using it.
-
My Firefox 4.0.1 crashes when I try to go to Tools>Get Add-ons. I don't have any add-ons installed on my Firefox, at all. My OS is Win7 64-bit. I've already tried Uninstall-Reinstalling Firefox but it didn't work either.
See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.com/kb/Firefox+crashes -
I can't get the latest version of iTunes 12.0.1 for Windows (64-bit) to work on my laptop. It says it has successfully downloaded and installed, but when I try to connect my new iPhone 6 to iTunes i get an error message 'need to install new software' but i thought i had! Please help me as i have had to connect my phone to someone else's mac and therefor don't have my music etc on my phone HELP! I have had IT support at work trying to figure it out and no one can!
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I get a message that say: ITunes could not connect to IPhone *** because the pairing record is missing" I never saw this before anyone know about this??
Do you still get that one if you restart the PC and try to connect again?
-
I am constantly getting a message which says "iTunes cannot run because some of it's required files are missing. Please reinstall iTunes." I've reinstalled a number of times and re-booted but it only seems to last a short time. How do I fix it?
HI daddio,
Ok some things first I need to know...Did you use Microsoft cleanup utility to clean up all those uninstalls you have done?
I hate Norton and anyone who reads my posts will know that. I have seen way too many infected PC's by Norton users. Did you try the EWIDO and AdAware scan? I see you said you read lots of posts. That is helping folks remove the malware in order to get iTunes and quicktime back to health.
Maybe you are looking for
-
Incoming calls are being answered by Viber, how can I stop this?
Folks, Suddenly in the last few days, when a call comes in to my iPhone 4s running IOS 7.04, it is answered by Viber, even if the caller is not even using Viber. Can this behavior be changed? TIA.
-
HP MediaSmart Connect x280n AC Adapter HELP PLEASE!
HP MediaSmart Connect x280n AC Adapter HELP PLEASE! Please someone tell me where I can get an AC for this unit and if not, please tell me the part number of this AC Adapter if you own one of these please? I have iterally looked for over 15 hours the
-
Mail 4.5 not retrieving catch-all mail from Pop Server.
I use email fowarding for a domain (hosted at Godaddy) to forward to my verizon email account. For example: [email protected], [email protected], and [email protected] are forwarded to [email protected] The Mail 4.5 client on my MacBook Pro (OSX 10.
-
Is there a way to keep the ADL open when testing CS5.5 Air apps after it loses focus?
When I test Air applications (specifically targeting mobile) it seems that when the ADL (Air Debug Launcher) launches, it will automatically terminate the session when I click on anything else other than the ADL window. I have been trying to use 3rd
-
Compaq Presario CQ57 Laptop System Bios recovery problem
A customer of mine has a Compaq Presario CQ57 that has developed a BIOS problem. I am unsure if it had had a BIOS update through HP Support Assistant or if it just decided to start for no reason but it now intermittently decides to recover the System