Missing guided & quick edit palettes in PSE10

Help! In PSE10 the palettes in guided & quick edit are missing also photo collage, photo book, etc. are missing from the orgainizer. When I go the the guided edit the palette on the right hand side is a black blank space. In the organizer if I click on the photo book tab or some of the other tabs it takes me to PSE full edit?

Hi Ken,
Thanks for your response. Yes I did install 3rd party actions. After trying to reset my paletts and preferences which didn't work, I found a similar problem on the discussion page which said the solution was to uninstall and reinstall, that's what I've done. Everything is working again.
Donna

Similar Messages

PSE9 Quick edit and guided edit have disappeared

Hi everyone, hope you can help me.
I downloaded an action, followed the installation advice and installed the action BUT then when I clicked the guided and quick edit tabs (which were kind of ghost letters), there's just blank panels.
The process for downlaoding the action I followed is here:
If you don’t see your action, click on the Filters button, which is the first button on the left under the word Effects. Then, click again on the Photo Effects Button. It really should be there now. If it is, stop now. You’re finished!
If you still don’t see your action, navigate to the 9.0 folder in the path above. Rename the ThumbDatabase.DB3 to anything you choose. You could add today’s date or “version 1″.
Open the Locale folder that is in the same9.0 folder. Open the en_US folder and rename the MediaDatabase.db3 file following the same method used in step 6. (Rather than renaming ThumbDatabase and MediaDatabase, you can actually delete them if you are comfortable with that, or cut them and paste somewhere safe until you know that PSE is working fine.)
Open PSE 9. The opening process will be quite slow as the two databases are being rebuilt. Open an image.
Click on the Photo Effects button (3rd from the left under the word Effects). In the drop-down list to the right of this button, select Show All.
You should be able to find your new action now. If you can’t, see Gotchas section below.
I think point 4 is the problem.
I emailed the place I got the action from:
http://www.texaschicksblogsandpics.c...shop-elements/
but so far have had no response.
can anyone tell me how to restore quick and guided edit?
Thanks very much!!

Thanks Ken,
I tried that without success,
I also heard back from where I got the download and they said downloading the action will not have caused the problem.
I will uninstall and reinstall from the disc.

Photoshop 10 crashes when I select quick edit and get no response when guided edit selected

PS Elements 10 crashes when I select quick edit and I get no response when guided edit is selected. Auto edit is working. Help???

It would help to have more information, but try this: Quit the editor, then restart it while holding down ctrl+alt+shift (command+option+shift on a mac). Keep the keys down till you see a window asking if you want to delete the settings file. You do.

Quick Edit Adjustments not working PSE 13

In PSE 13, I use quick edits Adjustments. While putting the cursor over the options (ex. Smart Fix at 87) it shows on the image but if you click it to say apply, it doesn't apply. You can't hit "auto" or toggle the switches; the adjustment just never applies. Please help.

Can you clarify what you meant by "The css file didn't even changed"? Do you mean when you type on the keyboard, the code in the inline editor doesn't actually change? Or do you mean the changes are visible in Brackets, but when you look at the file on disk (using a different editor) the changes are missing? Or is the file saved to disk correctly, but the Live Preview isn't updated to reflect the changes?
If it seems like the file is not getting saved to disk after hitting Save in Edge Code, please let us know the answers to these questions:
Does the dot icon (indicating unsaved changes) disappear when you hit Save, or does it remain visible?
Have you tried both the keyboard shortcut (Cmd+S) and the menu item (File > Save) -- do they both have the same problem?
Have you installed any extensions in Edge Code? If so, try disabling them -- choose Help > Show Extensions Folder, rename the "user" folder to something else, then quit & restart Edge Code. Does that fix the issue?
- Peter

Quick Edit Greyed out in Custom List

I have set up a SP 2013 environment using the trial software. I have created a new custom list using the
Custom List App. I've created all the columns and I just want to use Quick Edit to be able to cut and paste columns from an excel sheet (I'd prefer to import the excel sheet but that icon is missing!). Unfortunately, this is greyed out.
Just to test further, I created another custom list using the Custom List in DataSheet View
App - I can use Quick Edit in this list.
Is there a way to enable Quick Edit in my original list..? I don't want to recreate all the columns again - there are quite a few.
Thanks

I'm late to the game on this, but I just encountered the same issue. SP Foundation 2013 demo in a VM. Simple, four-column list. Nothing fancy. I have the box checked to 'Allow individual item checkboxes.
The important variable for me is that I set the view to display Newsletter style. That's what's causing the Quick Edit box to gray out (apparently, any choice other than Default causes this).
I found a resolution at https://support.microsoft.com/kb/2876824?wa=wsignin1.0 . Eventhough that page talks about SP Online, the proposed fix works on SPF also. Click
the List tab on the ribbon for your list. Then, click Modify View. Scroll down and click on the plus sign next to Style to expand that section. From the 'View Style' choices, select Default.

Error while trying to open edge-code-quick-edit.png

Hi,
I just installed Edge Code, looks great! A couple of issues I noticed when I started using it:
1. When tried opening one of the files (edge-code-quick-edit.png) displayed in the file explorer on the left side. I get an error while trying to do so.
2. The error dialog's text doesn't seem to be selectable, will be great if error messages can be selected and copied.
thnx
-mayank

I think Peter's reply above might have been to a different thread.
Brackets doesn't support opening binary files yet. This includes images. See https://github.com/adobe/brackets/issues/148
Good point. I've filed a bug. Due to some issues with our architecture and focus management, this doesn't work currently. https://github.com/adobe/brackets/issues/1708

Only using Quick Edit to interact with a list/view in Sharepoint 2013

Hello All,
I would like users to only interact with a view in Quick Edit mode as it has all the functions I need (Edit,add and delete) without having to open Web Forms. Is there a way to hide the "New Item" link on all current and future views for a list?
Thanks
MM

Lobo,
If you want to hide "+ New Item" which come as web part top left corner, then edit web part
Select "Data Sheet view" as default view from "Selected view" drop down of "edit web part property"
- "Data Sheet view" as web part don't show " + New Item" link.
If that list is display as web part in any of the page not as data sheet view as default then below steps will help.
Make "Toolbar type" as No toolbar just below selected view
Change view style to default to "Basic table" from "Edit the current view" of "edit web part property"
If you want to remove "new item" from file tab of ribbon, then permission need to be removed as contributor to read only.
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

How can i quick edit Audio( increase bass) of a single file?

Hi everyone,
Im new to FCPX. I have a bunch of videos of music gigs ive played and would like to increase the bass (via equalizer) on most of them. All these videos are already converted into an "Apple Friendly" format and are sitting comfortably in my Itunes Video folder. How can i quickly increase the bass in each video (Without having to tediously export one by one) in FCPX and do a quick overwrite over the original video without having to make an EXTRA file?
THanks

ok.
"Why don't you increase the bass with the equalizer in FCP? Do it to one clip and use paste attributes to apply it to other clips."
1) How do i copy the attributes after making the changes??
2) How do i paste the attributes onto the next file?
Thanks.
Re: How can i quick edit Audio( increase bass) of a single file?

How to change Left Datastore under join pannel in quick edit

Hi,
Source: MS SQL
Target: Oracle
ODI : 11g
I have created an interface which loads the data from source to target. For that I have dragged all the sources in the source drag area under the mapping tab and then dragged the target table in the target drag area. All the table having foreign key constraints. I have selected auto mapping then it automatically maps my source tables with target. Under the quick edits tab of interface in the Joins panel I see Left Datastore,Right Datastore and all. But I want my driving tables in the Left Datastore. But some tables in the Left Data store are not driving tables and I want to remove them from Left Datastore and put them into Right Data store and create right outer join.
Can anybody help me?
How I can change the Left datastore created by ODI in the by looking at constraints defined on source tables ?
Thanks,
Shrinivas
Edited by: Shrinivas Dayma on Sep 16, 2011 2:35 PM

You need to change in Control panel as well. It can be found in control panel > Default programs > Associate a filetype or protocol with a specific program.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Very slow pasting data from the Clipboard into a Sharepoint 365 list by using the Quick Edit view

<p>In sharepoint 2010 it was very fast to paste data from the Clipboard by using the Data Sheet view. Why is it so slow in Sharepoint 365 when using the Quick Edit View? is there a workaround?</p><p>also in Sharepoint 365 if you try to
paste a large number of records (2,000) it will freeze.</p>

I'm interest about same thing. Clipboard is often only way to migrate lists between sharepoint versions and now it is almost unpossible to use.

How to enable enable Quick Edit button in Discussions List (SharePoint community).

I wonder how I can enable the Quick Edit button in Discussions List (SharePoint community), see attachment. This is no problem on other list in SharePoint. I need to import data that I have in a Excel sheet from and old forum (not Sharepoint). So if I can
enable Quick Edit, I will just copy data into my Discussions List. Hope somebody can help me???

Hi,
Please execute the commands below to enable Quick Edit feature in Discussion board list:
$web = get-spweb "http://sp/sites/sitename"
$list = $web.Lists["listname"]
$list.DisableGridEditing = $false
$list.Update()
Now you could use Quick Edit in Management view.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Sort alphabetically a lookup column in 'Quick edit'

Hi Everyone,
I've had this problem for a long time now and have not been able to get it working. I have a List with several fields, one of them is a Drop-down list with a lookup field linked to another list called 'Customers' which has two fields 'ID' and 'Customer'.
If I create a 'New Item' the field 'Customer' is sorted alphabetically in ascending order by 'Customer', also in the list it's the same (which is what I want) however if I try to edit with the 'Quick Edit' button the lookup column is not sorted by 'Customer'
but by 'ID' and the users are complaining about this this there are more than 1,000 fields. Funny thing is as I already explained, if you create a 'New Item' or 'Edit Item' it works and is sorted as it should, only the lookup in 'Quick Edit' is sorted
by ID.
I already attempted the following and still no luck. I would very much appreciate the help.
Sort SharePoint lookup column Dropdown by customizing your list form with InfoPath
Regards,
--Luis
Si se solucionó tu consulta no olvides marcar la respuesta. Si te ayudó vótala como útil. Saludos!

Hi,
According to your post, my understanding is that you wanted to.
There is no out of the box way to accomplish this with SharePoint.
By design in SharePoint, the lookup column is sorted by ID in 'Quick edit'.
When you click the dropdown icon, the HTML Table will be appeared.
You can use JQuery to sort the Table.
More information:
http://www.granneman.com/webdev/coding/css/sorting-tables/
http://blog.niklasottosson.com/?p=1914
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Vision Acquisition Software installed, BUT why is the IMAQdx missing from the function palette?

I just installed to the labview 2011, and many other modules and softwares including this VASAugust2010. But the IMAQdx is missing from the function palette (vision and motion). However the NI-IMAQ 4.5, IN-IMAQ IO 2.4.0 and NI-IMAQdx 3.7 are all clearly listed as installed in the NI software (contorl panel -> program - NI). In MAX, my usb webcam is also listed as NI-IMAQdx Devices and works well under MAX. But my own program is broken because the LV can't find those functions. So why the IMAQdx funtion is missing and how to fix it?
Thanks,
Lei

hi tommy
check this may helps you http://digital.ni.com/public.nsf/allkb/A451D3CCBB740716862578FC004DB392
Sasi.
Certified LabVIEW Associate Developer
If you can DREAM it, You can DO it - Walt Disney

CyclPhotoshop Ellments 11 Editor will not open. Also I can edit in quick edit, but when I do, copy of picture is sent to ree bin. I am using Windows 7 ?

Photoshop 11 Editor will not open. Also I can edit in quick edit, but when I do copy of picture is sent to recycle bin. I am using Windows 7

I have solved the problem myself. I noticed when running Task Manager
that I was using a lot of resources (>60% CPU) when running Organizer. I
disabled Auto Analyzer and Face Recognition and all is fine now. I will add
one or the other a little at a time to see which is actually causing the
problem.
In a message dated 9/25/2011 2:18:09 P.M. US Mountain Standard Time,
[email protected] writes:
Re: PSE 9 Editor will not work if Organizer is running - what to do?
created by hatstead (http://forums.adobe.com/people/hatstead) in
Photoshop Elements - View the full discussion
(http://forums.adobe.com/message/3937331#3937331)

How do you make the project bin window Not come up in quick edit in PE9?

A few weeks ago I started to notice the Project Bin coming up whenever I went to quick edit. I don't think it did it before that. I always have to go to windows and uncheck it to get more screen space to work with.
How do I get the Project Bin to Not automatically come up when I press Quick edit in Premier Elements 9?

This is the Premiere Elements forum.
Quick Edit is a function of Photoshop Elements. If this is a question about Photoshop Elements, you're more likely to get an answer in the Photoshop Elements forum.

Missing guided & quick edit palettes in PSE10

Similar Messages

Maybe you are looking for