Missing half of the filters menu

I just installed Photoshop CS4 64-bit and I was going to throw some high pass over a copied image and found that half of the filters menu was gone.  I'm missing the following sections: Artistic, Brush Strokes, Sketch, Texture, Video, and Other.  I used the 30-day trial on another computer just as a demonstration, so I know they SHOULD be there.  And ideas friends?

We might be able to help if you told us a bit more.
For example:
Operating System/version
Processor
Photoshop version number
Amount of RAM installed
Hard drive(s) capacity
Video card make and model

Similar Messages

  • Half of the filters are missing CS4

    Half of the filters are missing on reinstall of CS4 64 bit. If I switch over to 32 bit the High Pass filter is missing.
    Vista Ultimate 64bit
    Any help to revover these filters would be appreciated.

    Before you go through all that try resetting your preferences as described in the FAQ.
    http://forums.adobe.com/thread/375776?tstart=0
    You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
    This resets all settings in Photoshop to factory defaults. 
    A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

  • I reinstalled my plug-ins into Photoshop CC (2014) on Mac OSX 10.9.4, and they are greyed out in the Filters menu. How do I get them to work? I have tried everything including repairing permissions.

    I reinstalled my plug-ins into Photoshop CC (2014) on Mac OSX 10.9.4, and they are greyed out in the Filters menu. How do I get them to work? I have tried everything including repairing permissions.

    My apologies. Your post jogged my little grey cells to the point that I did a few experiments. In essence, you are right. My plug-ins do not work with 8-bit greyscale images. I like to deliberately shoot B&W and have a Wratten #12 minus-blue filter on the lens--as I used to do with film cameras.
    The raw files ( Fujifilm's .RAF) were converted in Adobe CR by checking off "Convert to Grayscale" under the fourth tab. In the future, I will do the B&W conversion in Photoshop with either Nik or Topaz plug-ins.
    Thanks for your input!

  • Blur Gallery tools from the Filters menu in PsCC

    When I try to use the Blur Gallery tools from the Filters menu in PsCC the control overlays which should display on the image do not appear. How do I get them?

    You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden, so you need to hide the Menu bar via View > Toolbars, also accessible via Firefox > Options.<br />
    If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.<br />
    You can place the Tab Bar on top.
    * View > Toolbars : [ ] Menu Bar
    * View > Toolbars : [X] Tabs on Top
    * http://www.mozilla.com/firefox/features.html

  • I am missing options in the option menue - HELP

    I am missing for example the general settings or the options for smart dialing. Cant find them. In the manual is written, that I have to go to menue->options, but I cant find them there. Please help me.
    This is how my menue->options look like:
    About
    Advanced Options
    Auto On/Off
    Autotext
    Bluetooth
    Date/Time
    Lnaguage
    Memory
    MMS
    Mobile Network
    Owner
    Password
    Screen/Keyboard
    Security Options
    SMS
    Spell Check
    Status
    Theme
    Voice Dialing
    Wi-Fi Connections

    For Smart Dialing....
    Press your green dialing key to enter the Call Log > press the Menu key > Options... etc.,
    good luck,
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Unable to open PNG, save for web, and missing half of the format options under save as.

    Using Windows 7 Professional 64-Bit with SP1.
    When using Photoshop CC 64-Bit, i am unable to save for web, open PNG, or save as for about half the format options. I don't have any additional plugins installed, nor have I messed with the plugins folder.
    When trying to open PNG files it says: Could not complete your request because it is not the right kind of document.
    Photoshop CC 32-Bit works without any of these issues. I'll be switching to 32-Bit until this is resolved. Hoping I don't have to uninstall/reinstall (Install files are huge and take forever to download and I don't know how to save them to the hard drive with CC, thanks).
    Chris

    Sounds like you are missing some of the required plugins - possibly an updater failed, or someone moved/deleted the wrong directory.
    Yes, you'll need to reinstall to restore the missing plugins.

  • I have a Mac with Elements 9 and 10 the plugins all work fine. I was told that when I install full version of 12 it will find prior versions and collect the info. Well it didn't and none of my plugins in the filters menu show. I did select the same direct

    I need all my filters that are working in version 10 Mac to show in version 12 Mac. I have selected the same folder I had selected in 10 but only a few plugins show. I need all plugins to show. The install should have found the older versions of Elements 9 and 10 and setup properly, but the installer didn't do it.

    Also, no plugins transfer automatically from one version to the next. You must reinstall them, ditto for any third-party additions like actions, layer styles, etc.
    The only thing that a new version of PSE should find automatically would be your organizer catalog and photos.

  • Missing half of the report!

    Longtime Crystal developer and I'm completely stumped!
    We converted code over to .net 3 years ago.  We're running VS 2005/SqlServer 2005 and Crystal for VS2005.
    We have appox 200 reports that converted and everything's fine with them. I have one report that's giving me fits. Our standard platform was XP but we're moving to 7 and that's why I'm here.
    This one report has a special page size - it's half a regular 8.5x11 - it's 8.5x5.5. I have to define the form in Windows and assign the form to the printer. The printer is a dot-matrix Okidata that we've used for 12 years now. So, all that has been running fine on XP except at some of my locations, ONLY THE LEFT SIDE of the report (it's actually a bill of lading ticket) printed out. I "fidgited" around and finally got it to work, but I don't remember one concrete thing that caused it. It's VERY WEIRD. Now this same report is having issues in 7 and I'm completely stumped. The report prints fine if I PREVIEW it first and then print, but if I print directly to the printer..no go.  I also have another set of companies that print a bill of lading that's 8x11 AND THAT PRINTS FINE.
    I've defined a new .rpt and tried to print that and it's the same thing. So I can't tell whether it's VS, crystal report template, the special paper size or what.
    One 'wrinkle' is that I don't actually call like "reportdocument" directly. What happens is that the Centura TD code was 'wrapped'
    in .net code. But ALL the other reports print fine so I don't think it's that..
    Any clues??

    Heebie-jeebies is my 1st feel for this;
    Centura TD code was 'wrapped' in .net code(???)
    Printer is a dot-matrix Okidata that we've used for 12 years now
    Eeek.
    Anyhow. I'm pretty sure the printer is the issue here;
    1) Crystal Reports requires that a printer driver be Unicode compliant. Most dot matrix printers are not, certainly not 12 year old printers.
    2) Printer drivers these days must typically be coded specifically for the OS. I'm pretty sure a 12 year old printer driver is not coded for Win 7. And while other apps, etc., may work with that printer driver, CR may and probably will not.
    Possible solutions;
    1) Make sure you  are using SP1 for CR 10.2:
    https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
    I doubt SP1 will "fix" anything in this case, but weirder things have happened.
    2) Check if Okidata has an updated printer driver for that printer - one that is Unicode compliant and certified for WIN 7 (I kind doubt it...)
    3) 12 year old printer... as flip as it may sound, trying a newer printer may be the way to go
    - Ludek

  • Does the new Photoshop Elements 12 offer Liquify under the filters menu?

    Does Photoshop Elements 12 offer the Liquify filter and other image warping tools (ie the pucker and bloat filters) or are all of those only offered in the main Photoshop version???....

    Liquify, yes. Other tools, not so much, if you're looking for puppet warp and those. Best to download the trial and see what you think.

  • Saving ALV Grid to Local File issue - Missing half of the report

    Hi Experts, Good Day.
    I have developed an ALV Grid report using class CL_SALV_TABLE which displays 200 Columns and 100+ rows/records. It is displaying well, but when I am saving the output into local file (any type) there only 98 columns are downloading and remaining all the columns are missing.
    I would like to know whether there is any restriction for number of columns or what might the problem for it. How can I download all the columns into local file.
    Thanks in Adv.
    Vijay

    Hi,
    Thanks for your response. Even though there are multiple ways to send data to local file I believe all three are same. And even I am facing same issue all the ways. Only 98 Columns data is getting downloaded into Files (it might be .txt, .xls, etc.).
    After downloading first 98 Columns, I am hiding the downloaded columns and again I am downloading remaining columns. Then I am merging in the Excel file. This is very complicated for the End-User. So, please help me out.
    I have used only following methods for displaying ALV.
    For initial object/instance:
    CL_SALV_TABLE=>FACTORY,
    For ALV functions:
    CL_SAVL_TABLE->GET_FUNCTIONS,
    CL_SALV_FUNCTIONS_LIST->SET_ALL,
    For Column heading and Optimized width:
    CL_SALV_TABLE->GET_COLUMNS,
    CL_SALV_COLUMNS_TABLE->SET_OPTIMIZE,
    CL_SALV_COLUMNS_TABLE->GET_COLUMN,
    CL_SALV_COLUMN->SET_SHORT_TEXT,
    To display grid:
    CL_SALV_TABLE->DISPALY.
    - Thanks
    Vijay

  • The new fire and trees filters don't show in the filters menu

    I have PS CC v14.2.1 x64. I saw them for a minute, now they're gone. I have a layer open, a path drawn and active and the fire filter doesn't show in the Filter/Render menu

    It wouldn't be in CC, but in CC 2014.2.1 (or version 15)  CC is version 14.2.1
    But if you are still in CC, they are located in the Edit > Fill dialog Pattern > Scripted Patterns.
    Gene
    (I know this numbering system can be misleading) 

  • Missing bottom half of the Sony Ericsson Sync screen

    Hi!
    After logging in to Sony Ericsson Sync at http://www.sonyericsson.com/wportal/uss/promotion?cc=se&lc=sv I am missing half of the screen. I see the status part (last sync, and links to Contacts/Calendar/Bookmarks/Notes/Settings), but not the bottom half as depicted here:
    This means I am unable to add a new phone for synchronization, which is a bit annoying.
    I've tried in Opera, Iceweasel (Firefox) and Chrome, both from home and from my office, and I get the same problems everywhere.
    Solved!
    Go to Solution.

    I have no experience of my own from other sync services so I'm not sure which one you could use instead.
    Have a look at this list here and see if you can find any that suits you.
    http://en.wikipedia.org/wiki/SyncML#SyncML_hosted_services
    Anyone reading this who knows a good SyncML sync service - feel free to post and tell us about it.

  • I am using Photoshop as external editor but can't use all the filters

    Hi,
    I have just started using Aperture and have set-up photoshop CS2 as the external editor. I'm trying to add film grain to some of my images using the artistic filters. If I open one of my RAW (EOS 5D) images in Bridge once open in CS2 all the filters are available for use.
    If I select a RAW image in Aperture and use the open with external editor feature, once the image is launched in CS2, half the filters are unavailable. Why is this and how do I over come the problem? Is it because Apertur opens the file in a funny format?
    Many thanks in advance for your help

    a few filters will (or have already) changed in cs3, however most remain the same in terms of 8 vs 16 bit. filters who are based on the rgb channels will be "grayed out" in the filters menu if an image has 16bit colours (regardless of tiff or psd of course).

  • Where is the "Effects" menu in FW CS5?

    I'm trying to create a NavBar in Fireworks CS5 and I'm following along an Adobe Document describing how to do this...  However the step I'm on in the tutorial is saying select "Effects -> Bevel" and I can't find it anywhere...
    Did this get moved or removed?  How do I accomplish this?
    Thanks In Advance!

    I'm not sure about CS5, but I've always added effects via the Properties Inspector (at the bottom right).
    These options may not appear if you're using a Bitmap tool; try the Pointer tool instead, and make sure that an object has been selected. (You can confirm this by looking in the Layers panel.) Then click on the "+" icon to access the dropdown menu of Effects (a.k.a. "live filters").
    Otherwise, you can apply the same basic effects via the Filters menu (at the top of the interface); but those versions are for bitmaps only and are uneditable once applied.
    Hope this helps!

  • Where are Filters menu in Flash CS4.

    According to flash documentation Filters are in PROPERTIES panal.But Filter are  not available.
    Plz some one help me.
    Thanks

    Following what seems to be my pattern of chiming in on months-old posts...
    I have found that loading Flash files intended for older systems (AS1 and AS2, I suppose) can cause the Filters menu to disappear.  If you try creating a new AS3 or AS2 project in CS4, and creating a new text object, the filters menu is right where it is supposed to be.  Creating a text object in that project, adding the appropriate filter, copying the object and pasting it into the older-type project results in a text object with no filter.
    I suppose filters are relatively new to Flash...?
    LB

Maybe you are looking for