Missing HDMI1 in xrandr after system update

Hey archlinux crowd,
I am running arch on my (now 4 month old) Samsung Ultrabook NP940X3G.
It worked out-of-the-box immediately. Nice!
But probably a month ago a system update (which included intel drivers) shredded my external port. HDMI1 was missing from xrandr, instead DP1 and VIRTUAL shows up in addition to eDP1 which is the actual laptop screen.
I tried to investigate but stopped soon. Eventually, another system update a week later fixed the problem.
Now, after updating the system two days ago the same error occurred again. Reboot and HDMI1 is replaced by those mentioned fellas.
Anyone with similar problem or ideas?
$ lspci
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
00:1c.2 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
02:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
$ lsmod | grep intel
intel_rapl 17356 0
intel_powerclamp 17122 0
kvm_intel 143217 0
kvm 413027 1 kvm_intel
crc32c_intel 21809 0
ghash_clmulni_intel 12978 0
aesni_intel 151423 1
aes_x86_64 16719 1 aesni_intel
lrw 12757 1 aesni_intel
glue_helper 12649 1 aesni_intel
ablk_helper 12572 1 aesni_intel
cryptd 18553 3 ghash_clmulni_intel,aesni_intel,ablk_helper
snd_hda_intel 26327 7
snd_hda_controller 26727 1 snd_hda_intel
snd_hda_codec 108552 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
intel_gtt 17848 1 i915
snd_pcm 88487 5 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd 69340 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
Any additional information necessary?
Thanks in advance
Jakob

Similar Messages

Lack of 3g after system update

Hello :-)
It's problem with Xperia E dual
Few days ago I updated the system to the 4.1.1 version (compilation 11.3.A.1.39).
Unfortunatelly after updating I've discovered that smartphone don't works with 3G. On the display I've only icon "E". Before updating there was typically "H". Of course now the transfer is slower than before and of course I'm not happy of that.
I try to solve this problem - choose in menu list of available provider and... there are only 2G nets. Because I've functioning still in the same place of live and the problem has occured after the updating I'm sure that it's strictly connected.
Is there any solution for that?
Another problem is with trying to call. After system updating typically twice a day I have to restart smartphone because it's totally hanged. No one can connect with me and I can't call to anybody. Smartphone looks normally and doesn't give any siglan that something is wrong. But when I try to connect to somebody I direst the number and... there is no signal at all. After few seconds telephon return to main menu. There is also no record about this trial of connection in the list of done connections. It's very uncomfortable situation.
Sure, there are also some adventages with the system updating but problems mentioned above are really annoing.
Have you any solutions for it?
Thanks in advance.
Rafal
Solved!
Go to Solution.

Hi, try repairing phone software with PC Companion or Update Service.
http://www.sonymobile.com/gb/tools/pc-companion/
http://www.sonymobile.com/gb/tools/update-service/
Be aware that this will erase phone data completely, backup if necessary.
Before proceeding with software repair, confirm with your Network Operator that there is nothing wrong with the network. Also, remove and reinsert SIM card and try again (have a close look at the contact surface, ensure that it is relatively clean).
Don't forget to mark correct answer as Accepted Solution.
If you find the post helpful, press Kudos.

How to turn off alarm after system update?

I get alarm when restarting my T400 after system update. Can anyone give me suggestions to turn off this alarm?
Thanks,

I have no display > powercontrol in openbox, gnome or fluxbox, What are you talking about?

Missing ttyUSB0 and cant hibernate after system update

Hi! I'm using usb modem huawai. Before my yesterday's update everything was fine, but after it ttyUSB0 had gone missing. E.g. it (ttyUSB0) doesn't appear when i plug in my usb modem any more. Also gnome's hibernate utility doesn't work anymore. When I stop working and press System -> Shut Down -> Hibernate it looks like it suspends to my swap disk, but it doesn't resume when i start over it works like if i rebooted.
I suppose these two issues r connected and their cause is system update. Any ideas?

usbserial is loaded. lsusb shows:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 09da:000a A4 Tech Co., Ltd Port Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 12d1:1446 Huawei Technologies Co., Ltd.
Bus 002 Device 002: ID 064e:c107 Suyin Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
and i made
>pacman - Suu

[Solved] Audio dead after system update

I was having a difficult time with network issues so I did a system update last night, and while it cured my network woes something broke my sound which was working fine before. I use MPD and Ario to play music and VLC to play video and both have no sound. I tried everything in the wiki to no avail, and searched the BBS for ideas (I always use startx).
I did several lsmod, aplay -l, aplay -L, etc commands and everything looks just the same as before the update. I checked audio levels in alsamixer, and even tried to install pulseaudio on top of several reboots and adding myself to audio. The only thing else that might help is I hear a pop from my speakers every so often. I don't know what else to provide that could help. It's hard for me to figure out because everything looks normal, and the cards are even being initialized as far as I can tell.
Last edited by zerologik (2013-03-05 04:56:29)

lsmod |grep "snd"
snd_hda_codec_hdmi 27561 1
snd_hda_codec_realtek 61729 1
snd_hda_intel 27668 11
snd_hda_codec 100743 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6429 1 snd_hda_codec
snd_pcm 77827 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7427 2 snd_pcm,snd_hda_intel
snd_timer 18935 1 snd_pcm
snd 60157 29 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5443 1 snd
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC888-VD Analog [ALC888-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC888-VD Digital [ALC888-VD Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default:CARD=SB
HDA ATI SB, ALC888-VD Analog
Default Audio Device
sysdefault:CARD=SB
HDA ATI SB, ALC888-VD Analog
Default Audio Device
front:CARD=SB,DEV=0
HDA ATI SB, ALC888-VD Analog
Front speakers
surround40:CARD=SB,DEV=0
HDA ATI SB, ALC888-VD Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=SB,DEV=0
HDA ATI SB, ALC888-VD Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=SB,DEV=0
HDA ATI SB, ALC888-VD Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=SB,DEV=0
HDA ATI SB, ALC888-VD Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=SB,DEV=0
HDA ATI SB, ALC888-VD Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=SB,DEV=0
HDA ATI SB, ALC888-VD Digital
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
HDA NVidia, HDMI 1
HDMI Audio Output
Everything looks normal to me, unless I'm missing some crucial detail somewhere.
*EDIT: I went ahead and tried a few more things and reread the PulseAudio entry in the wiki and used pavucontrol as a last ditched effort and found that after the update it seems the soundcard became muted somehow even though I never had pulse installed before on this machine.
I should have tried that first, sorry for anyone who wasted their time on this thread and a good lesson for fellow newbies is to always try control packages first before moving onto other means/making a thread. Marking this as solved.
Last edited by zerologik (2013-03-05 04:56:06)

[SOLVED]wlanwep encryption is failing after system update(pacman -Syu)

After a system update with "pacman -Syu" my wlan encryption does not work anymore.
If I switch off encryption on my access point, I can communicate without any problems.
I have currently two wlans active, one with encryption, one without. I use the following iwconfig settings
iwconfig wlan0 essid my_open_wlan
iwconfig wlan0 essid my_wep_wlan key s:my_wep_password
In the first case I get the connection, in the second I cannot transmit over the network(Destination Host Unreachable).
lspci:
07:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
iwconfig:
wlan0 IEEE 802.11bgn ESSID:"wlan_2012"
Mode:Managed Frequency:2.437 GHz Access Point: 00:04:0E:57:4E:27
Bit Rate=1 Mb/s Tx-Power=13 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=39/70 Signal level=-71 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:44 Invalid misc:43 Missed beacon:0
ip addr:
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether ec:55:f9:1d:bf:41 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.11/24 brd 192.168.1.255 scope global wlan0
inet6 fe80::ee55:f9ff:fe1d:bf41/64 scope link
valid_lft forever preferred_lft forever
This is the output for the open wlan. If I try to connect to the encrypted wlan with "iwconfig wlan0 essid "my_encr_wlan" key s:my_wep_password", the iwconfig command gives me:
wlan0 IEEE 802.11bgn ESSID:"wlan_2007"
Mode:Managed Frequency:2.452 GHz Access Point: D8:5D:4C:FA:24:0D
Bit Rate=5.5 Mb/s Tx-Power=13 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=33/70 Signal level=-77 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:2 Invalid misc:1 Missed beacon:0
I have tried wpa_supplicant as well with the same result.
Can anybody give me hint?
Regards
Helmut
Last edited by helmut (2012-03-05 16:31:25)

Wep and ath9k has been buggy for me for a long time now - sometimes it works, sometimes it doesn't. Never got around it, adding "options ath9k nohwcrypt=1" into /etc/modprobe.d/ath9k.conf seemed to work for some time. You could give it a try. The network I have problems with is at the university, they use wep + vpn to connect. I can connect fine (like in your last iwconfig), but dhcpd times out.
If you have control over the network, you could just switch to wpa - safer anyway. Or search the forum for "atheros wep", it is a somewhat common problem I think.
P.S.: please use code tags when posting console output.
Last edited by hokasch (2012-02-18 14:48:24)

Excite PRO 3G connection not work after system update

Hello, I live in Italy and on last Sunday (january 26th) my Excite PRO tablet (model AT10LE-A-10H) got the Android version 4.3.201121220.35. After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service". My sim card is ok. I used this sim card before the system update and I didn't get any problem with Android 4.2.2.
Please help me I'm waiting for your help.
Thank you
Regards

This is the forums for Toshiba USA. Unfortunately, we don't have informaiton about your model. You may want to contact Toshiba in your region. You could check the Toshiba Europe forums.
- Peter

After System Update keyboard doesn't work -MacBook

Here is what happened and I was able to fix, someway... but not definetly.
I updated to Snow Leopard and everything was fine. After I launched System Update to finish the update, I installed a few ones then I rebooted.
At the login I realized that some of the keys didn't work anymore. Namely
0 = P ] ; \ / ENTER
those what I found.
With the help of the virtual keyboard I was able to take a look at the log and I noticed that the /System/Library/Extensions/AppleHIDKeyboard.kext was updated just before the last working configuration...
Luckily I had a bootable backup of the system before Snow Leopard, so I boot from the external USB drive and copied the old AppleHIDKeyboard.kext in place of the new one, that I saved with .bak extension.
I rebooted and the keyboard was properly working again.
I think my fix is "dirty". I experienced some slowdowns here and there and I found a log message stating:
com.apple.kextcache[271] AppleHIDKeyboard.kext does not declare a kernel dependency; using com.apple.kernel.6.0.
I'm wondering why the keyboard stopped working and if there is a better way to fix it.
Any comment? (Please)
All log messages containig "keyboard" follows
Thanks
<START OF LOG MESSAGES CONTAINING "keyboard">
[[MARKER THIS IS AFTER SNOW LEOPARD UPDATE]]
16/03/2010 14:47:53 pkgutil[1163] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/CodeDirectory' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/CodeDirectory'.
16/03/2010 14:47:53 pkgutil[1164] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/CodeRequirements' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/CodeRequirements'.
16/03/2010 14:47:54 pkgutil[1165] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/CodeResources' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/CodeResources'.
16/03/2010 14:47:54 pkgutil[1166] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/CodeSignature' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/CodeSignature'.
16/03/2010 14:47:54 pkgutil[1167] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/Info.plist' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/Info.plist'.
16/03/2010 14:47:54 pkgutil[1168] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/MacOS/AppleBluetoothHIDKeyboard' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/MacOS/AppleBluetoothHIDKeyboard'.
16/03/2010 14:47:54 pkgutil[1169] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/Resources/AppleBluetoothHIDKeyboard.plist' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/Resources/AppleBluetoothHIDKeyboard.plist'.
16/03/2010 14:47:54 pkgutil[1170] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/_CodeSignature/CodeDirectory' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/_CodeSignature/CodeDirectory'.
16/03/2010 14:47:54 pkgutil[1171] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/_CodeSignature/CodeRequirements' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/_CodeSignature/CodeRequirements'.
16/03/2010 14:47:54 pkgutil[1172] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/_CodeSignature/CodeResources' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/_CodeSignature/CodeResources'.
16/03/2010 14:47:54 pkgutil[1173] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/_CodeSignature/CodeSignature' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/_CodeSignature/CodeSignature'.
16/03/2010 14:47:54 pkgutil[1174] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/version.plist' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/version.plist'.
16/03/2010 14:47:54 pkgutil[1175] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/CodeDirectory' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/CodeDirectory'.
16/03/2010 14:47:54 pkgutil[1176] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/CodeRequirements' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/CodeRequirements'.
16/03/2010 14:47:55 pkgutil[1177] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/CodeResources' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/CodeResources'.
16/03/2010 14:47:55 pkgutil[1178] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/CodeSignature' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/CodeSignature'.
16/03/2010 14:47:55 pkgutil[1179] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/Info.plist' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/Info.plist'.
16/03/2010 14:47:55 pkgutil[1180] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/MacOS/AppleUSBHIDKeyboard' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/MacOS/AppleUSBHIDKeyboard'.
16/03/2010 14:47:55 pkgutil[1181] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/_CodeSignature/CodeDirectory' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/_CodeSignature/CodeDirectory'.
16/03/2010 14:47:55 pkgutil[1182] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/_CodeSignature/CodeRequirements' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/_CodeSignature/CodeRequirements'.
16/03/2010 14:47:55 pkgutil[1183] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/_CodeSignature/CodeResources' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/_CodeSignature/CodeResources'.
16/03/2010 14:47:55 pkgutil[1184] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/_CodeSignature/CodeSignature' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/_CodeSignature/CodeSignature'.
16/03/2010 14:47:55 pkgutil[1185] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/version.plist' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/version.plist'.
[[MARKER NOW I REBOOTED AND THE KEYBOARD DID NOT WORK]]
16/03/2010 17:24:43 /System/Library/Input Methods/KeyboardViewer.app/Contents/MacOS/KeyboardViewer[313] CGSKeyTranslateInitialize: KLGetCurrentKeyboardLayout or KLGetKeyboardLayoutProperty is not available, fall back to USA keymap
16/03/2010 17:55:06 /System/Library/Input Methods/KeyboardViewer.app/Contents/MacOS/KeyboardViewer[337] CGSKeyTranslateInitialize: KLGetCurrentKeyboardLayout or KLGetKeyboardLayoutProperty is not available, fall back to USA keymap
[[MARKER NOW I WILL TRY TO INSTALL A FIRMWARE UPDATE, BUT IT WILL STATE THAT MY SYSTEM DOESN'T NEED IT. SO NOTHING DONE]]
16/03/2010 21:27:26 /System/Library/Input Methods/KeyboardViewer.app/Contents/MacOS/KeyboardViewer[433] CGSKeyTranslateInitialize: KLGetCurrentKeyboardLayout or KLGetKeyboardLayoutProperty is not available, fall back to USA keymap
16/03/2010 21:33:37 Installer[462] Opened from: /Volumes/MacBook MacBook Pro Keyboard Update/MacBookMacBookProKbdSU.pkg
16/03/2010 21:36:52 /System/Library/Input Methods/KeyboardViewer.app/Contents/MacOS/KeyboardViewer[490] CGSKeyTranslateInitialize: KLGetCurrentKeyboardLayout or KLGetKeyboardLayoutProperty is not available, fall back to USA keymap
17/03/2010 07:13:25 /System/Library/Input Methods/KeyboardViewer.app/Contents/MacOS/KeyboardViewer[662] CGSKeyTranslateInitialize: KLGetCurrentKeyboardLayout or KLGetKeyboardLayoutProperty is not available, fall back to USA keymap
[[MARKER AND HERE IS AFTER I RESTORED THE OLD AppleHIDKeyboard.kext...]
17/03/2010 07:44:23 com.apple.launchd.peruser.502[182] ([0x0-0x60060].com.apple.KeyboardViewer[662]) Exited: Killed
17/03/2010 08:21:55 com.apple.kextcache[271] AppleHIDKeyboard.kext does not declare a kernel dependency; using com.apple.kernel.6.0.
<END OF LOGS>

It is never a good idea to mix system components like kext's from different OS X versions. If you right-click on for instance the AppleHIDKeyboard.kext & choose "Show contents" you will see that it is a bundle composed of many individual files. Many of these files contain information about files in other OS bundles. Similarly, other OS bundles may contain info about the files in this bundle. This tells the OS what +set of files+ it can & can't use for various functions.
IOW, kext's are not self-contained, functionally independent items. When you replace one with one from a different OS version, its info about other files usually won't be right. This can & very often does cause problems. Some are minor but others can cause progressively greater problems, eventually damaging the OS enough that it becomes inoperative.
So, your fix is almost certainly "dirty."
It's also not addressing the source of the problem. There is nothing wrong with Snow Leopard's AppleHIDKeyboard.kext file (version 1.2.0). Snow Leopard works perfectly well with my & thousands of other users' MacBooks. The cause of your problem could be many things, but this is not one of them. If you can accept that, there are several things you can do to find the cause, starting with running the Apple Hardware Test to see if it finds up any problems with your MacBook.

BannerMaker not working after system update.

Hello all,
I am not trusting Apple now for system updates anymore, because the last couple of updates, after updating my system software, I have problems. I never have these issues with Windows.
Getting to my point, I use BannerMaker (an app created by some Fed agency that I had found googling because Apple doesn't support it as standard, and Windows already had this for years to comply with DOD requirements) to use for a login warning legal note, etc. This goes on to the login window only when you disable the icon/name login. I was in the process of updating it and it told me that the loginwindow.plist wasn't found. I found it on the Spotlight, but I had no way of changing it.
I should also note that after the system update, the login process reverted back to the icon/name login, which never happened. I always require me and another user to type their username because to protect the user's privacy.
How can I get BannerMaker to work again, or how can I get into that file so I can change it and I also want to know if other users had their loginwindow settings mysteriously affected by the update?
I am really disappointed by the lousy updates that paralyzes my security and other issues with previous updates, which I won't get into. I am disappointed with Apple right now.
Steven

I had a feeling that was going to happen. Well I just don't have the patience to do that. Apple needs to go onto the Windows system that you could delete specific updates rather than reinstalling the system software. And I also don't like how updates affect work around apps, how they close them down because they are not authorized software. I need a secure system, and Apple won't let me. **** to screw with them, I might just give my mother my MacBook and I go get a Windows notebook. I had nothing but problems since I got this MacBook.

My iPad will not sync after system update and returns message that my computer is no longer authorised.

Please help me sync my iPad as it is not able to sync after a system update. Several messages 1. Computer no longer authorised and when I reauthorise it it prepares to sync and then it tells me my iPad cannot be written to,

Hi leefromwoodford,
The following article will tell you how to transfer purchased music from your iPhone to the your Mac -
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Specifically -
Transferring purchases
If your iPhone, iPad, or iPod has your purchased content from the iTunes Store, you can transfer the content to a computer that is authorized for your Apple ID.
Note: This option only works for content you purchased from the iTunes Store (as opposed to content from other sources, such as CDs you may have imported). For content you did not purchase from the iTunes Store, synchronization occurs in one direction only. This means your content can be copied from a computer to your iOS device, but cannot be copied from your device to a computer.
Open iTunes.
From the Store menu, choose Authorize This Computer.
Enter your Apple ID and password. Then, click the Authorize button.
Connect your device your computer. If it is synced with another iTunes library, you may be asked if you want to "Erase and Sync" or "Transfer Purchases."
If that alert appears, click Transfer Purchases.
Important: Clicking Erase and Sync will delete any existing content currently on your device. The content would then be replaced with the content that is on the computer.
If you were not offered the option to transfer purchases:
After connecting your device to the computer, its icon appears in iTunes. Click the icon.
From the File > Devices menu, choose "Transfer Purchases from 'Your device name.'"
Note that the computer must be authorized for the Apple ID under which the purchases were made.
You may also want to download the music directly from the iTunes store, rather than using the iPhone. See this article -
Download past purchases
http://support.apple.com/kb/HT2519
Thanks for using Apple Support Communities.
Best,
Brett L

Can't boot after system update: unknown filesystem type

After running a system update, including updating the kernel, I can't boot to the new kernel.
On booting, grub loads the kernel image, runs/loads udev, but then fails to mount the root partition with error:
mount: unknown filesystem type 'ext4'
I have tried reinstalling the 'linux' package via packman several times, also trying the --recursive argument to make sure all my dependencies were there, and after days of googling and tweaking my system, I'm at a loss.
Thank goodness I happened to keep a spare kernel laying around in /boot.
Thanks in advance.
Last edited by jackrabbit (2012-03-22 23:25:28)

The OP can read their partition initially though, it's only after udev that they can't.
Also, try adding "rootfstype=ext4" to your grub kernel line. Is your /boot on a separate partition or part of your / partition?

Xperia z1 Problem AFTER system update to latest software 14.3.A.0.681

Hello people, First of all let my just say that I am new into the ''smartphones world'' so please excuse my queries if they proof to be 'obvious' to you! I have carried out a system update to my Xperia Z1 phone yesterday (Android 4.4.2. kitkat, latest available software 14.3.A.0.681). The update seem to have been correctly performed. However I have since encounter the following issues/problems with my phone and do not know how to fix them: 1) First of all my phone will no longer rotate...why is this? Is this related to the update?? Pictures/photos can no longer rotate and also phone screen does no longer rotate! Why is this..? 2) Second the 'Notifications Bar' structure has changed : is this also the result of the update or can I do something in settings to fix it and make it as before? When I scroll dawn the notifications bar, the icons are no longer displayed at the top line but are instead spread underneath BUT this is AFTER I press 'Quick settings'. 3) Battery signal icon has changed completely: no lines included inside icon to show usage but instead usage %age is now displayed. Also, when I charge my phone, there is no icon flashing as before and now lights flashing.. 4) Also when I want to use the phone after it has remained unused for sometime it states 'swipe to unlock' and makes a 'funny' note upon performance of the act: this was not the case before.. Can you please help me with the above? I am freaking out because I am excited with my new phone and would love to make full use of it properly but it is a bit hard for me since I have no clue how to fix issues/problems appearing every now and then since I am new into these things.. Thanking you in advance

Hi there,
I think you have fixed your 1st issue.
2) Yes, Kitkat has changed the Notification Bar structure. Its a bit annoying, but to get around it you can use Widgets - Tools and select the Icon, such as WIFI to be placed on your home screen to avoid multiple clicks. You cant do anything in the settings to make it like before.
3) Battery Signal Icon - Again a Kitkat update has done that. The good thing is that it has enhanced Battery life considerably.
4) I am assuming you are stating about the "sound note" it makes when you swipe in. Thats again a Kitkat feature and you can get rid of it though Sound settings if you dont like it.
Reality is that Kitkat runs very well on Google Nexus 5. Apart from that it has issues on every other Android power Smartphone out there. I also own a Nexus 4 who recently got upgraded to Kitkat and compared it with Nexus 5. Was not impressed to be honest.
As of my upgrade on Z1, I have been facing Volume issues. When I play a video the volume is minimized for some reason. Pause and play again and it goes to Normal. I have to reboot it sometimes to play normally. It also takes ages to connect to my 3G provider, whereas previously it was fast enuf. I hope the next upgrade will fix those issues.

Problems Opening Outlook 2007 after system update

Hi,
I've been running Outlook 2007 on my Windows Vista machine for few years now. Last week a System update occurred and my machine locked up. I was forced to reboot the machine, and I took the option to "restore PC to last known working state"
which turned out to be a mistake - The update made another few changes to my system and since then MS Outlook has continually crashed. It's able to download (and delete) messages from the POP server, but when I navigate to the the Inbox Outlook crashes.
In desperation I've:
1) I've uninstalled Outlook, rebooted, reinstalled Outlook.
The same problem occurred
2) Uninstalled Outlook, renamed the AppData\Local\Microsoft\Outlook directory, rebooted, reinstalled Outlook.
Ms Outlook keeps trying to find the pst file which no longer exists.
I'm guessing, but are there some settings in the registry which need to be cleared out before I can reinstall. If so, where would they be?

Thanks for getting back to me - and so quickly as well.
I'm now able to launch Outlook, but when I navigate to any of the folders I get a message that says "Microsoft Office Outlook has stopped working" after which I have to close the program again. This was the original problem!
The event viewer doesn't give me much more information:
ID: 6, Application Name: Microsoft Office Outlook, Application Version: 12.0.4518.1014, Microsoft Office Version: 12.0.4518.1014. This session lasted 11 seconds with 0 seconds of active time. This session ended with a crash.

[solved] Pulseaudio doesn't detect sound card after system update

Before a recent system update I had pulseaudio working flawlessly, but after doing a recent system update with pacman -Syu,
pulseaudio no longer sees my sound card and only displays the Dummy audio device. Among the packages updated that I can
remember off the top of my head are the Linux keneral, udev, kmod, instead of trying to roll back my system I figured I would try
to fix the issue. The only thing suggested in the Pulseaudio wiki is that a asound.conf directory is overriding the /etc/asound.conf
file which is not the case on my system.
Looking at the output from lsmod I can see where the kernel modules for the sound card is getting loaded
snd_hda_intel 23375 0
snd_hda_codec 89160 3 snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi
snd_hwdep 6389 1 snd_hda_codec
snd_pcm 74780 3 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi
snd_page_alloc 7153 2 snd_pcm,snd_hda_intel
snd_timer 19544 1 snd_pcm
and looking at the output from the ps command I can see that pulseaudio is getting started
1190 ? S<l 0:00 /usr/bin/pulseaudio --start
1195 ? S 0:00 \_ /usr/lib/pulse/gconf-helper
but pacmd list still reports this
0 card(s) available.
0 sink input(s) available.
0 source outputs(s) available.
0 cache entrie(s) available.
Here is the output of pacmd dump if it helps
### Configuration dump generated at Thu Feb 16 08:45:56 2012
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
load-module module-augment-properties
load-module module-udev-detect tsched=0
load-module module-jackdbus-detect
load-module module-bluetooth-discover
load-module module-esound-protocol-unix
load-module module-native-protocol-unix
load-module module-gconf
load-module module-default-device-restore
load-module module-rescue-streams
load-module module-null-sink sink_name=auto_null sink_properties='device.description="Dummy Output"'
load-module module-always-sink
load-module module-intended-roles
load-module module-suspend-on-idle
load-module module-console-kit
load-module module-position-event-sounds
load-module module-cork-music-on-phone
load-module module-filter-heuristics
load-module module-filter-apply
load-module module-dbus-protocol
load-module module-x11-publish display=:0.0
load-module module-cli-protocol-unix
set-sink-volume auto_null 0x10000
set-sink-mute auto_null no
suspend-sink auto_null yes
set-source-volume auto_null.monitor 0x10000
set-source-mute auto_null.monitor no
suspend-source auto_null.monitor yes
set-default-sink auto_null
set-default-source auto_null.monitor
### EOF
EDIT: I should also add that fuser -v /dev/snd/* returns nothing and fuser -v /dev/dsp returns "Specified filename /dev/dsp does not exist".
Last edited by vendion (2012-03-02 23:26:28)

Digging into this further aplay -L gives different output based off of whether or not I ran is as my normal user or with sudo/as root.
As a user (which is how pulseaudio is also being ran):
> aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
as root it does see both my sound cards when I run it with sudo or as root:
> sudo aplay -L
Password:
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=SB
HDA ATI SB, ALC887-VD Analog
Default Audio Device
front:CARD=SB,DEV=0
HDA ATI SB, ALC887-VD Analog
Front speakers
surround40:CARD=SB,DEV=0
HDA ATI SB, ALC887-VD Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=SB,DEV=0
HDA ATI SB, ALC887-VD Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=SB,DEV=0
HDA ATI SB, ALC887-VD Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=SB,DEV=0
HDA ATI SB, ALC887-VD Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=SB,DEV=0
HDA ATI SB, ALC887-VD Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=SB,DEV=0
HDA ATI SB, ALC887-VD Digital
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=HDMI,DEV=0
HDA ATI HDMI, HDMI 0
HDMI Audio Output
This behavior is confusing to me, and if someone knows what is going on and how to fix it I really want to get sound with pulseaudio working and have sound again.

Ctrl+alt+backspace doesn't work anymore after system update

After a recent system update (xorg got updated among other packages), ctrl+alt+backspace doesn't restart gdm anymore.
Before you say it, I have the following in my /etc/X11/xorg.conf
Section "ServerFlags"
Option "DontZap" "false"
EndSection
Here is the relevant portion from my /var/log/pacman.log and as you can see, xorg-server did get updated.
[2009-05-29 18:37] starting full system upgrade
[2009-05-29 18:39] upgraded dhcpcd (5.0.2-1 -> 5.0.4-1)
[2009-05-29 18:39] NOTE
[2009-05-29 18:39] ----
[2009-05-29 18:39] Add your user to group 'camera' to use camera devices.
[2009-05-29 18:39] upgraded libgphoto2 (2.4.5-1 -> 2.4.6-1)
[2009-05-29 18:39] upgraded gphoto2 (2.4.4-1 -> 2.4.5-1)
[2009-05-29 18:39] upgraded gtkam (0.1.15-1 -> 0.1.16.1-1)
[2009-05-29 18:39] upgraded lib32-glibc (2.9-4 -> 2.10.1-2)
[2009-05-29 18:39] upgraded lib32-alsa-lib (1.0.19-1 -> 1.0.20-1)
[2009-05-29 18:39] upgraded lib32-gcc-libs (4.3.3-1 -> 4.4.0-2)
[2009-05-29 18:39] upgraded lib32-libdrm (2.4.9-1 -> 2.4.11-1)
[2009-05-29 18:39] upgraded lib32-libgl (7.4.1-1 -> 7.4.2-2)
[2009-05-29 18:39] upgraded lib32-mesa (7.4.1-1 -> 7.4.2-1)
[2009-05-29 18:39] upgraded libdrm (2.4.11-1 -> 2.4.11-2)
[2009-05-29 18:39] upgraded live-media (2009.02.23-1 -> 2009.04.20-1)
[2009-05-29 18:39] upgraded qt (4.5.1-2 -> 4.5.1-3)
[2009-05-29 18:39] upgraded phonon (4.3.1-1 -> 4.3.1-2)
[2009-05-29 18:39] upgraded pygobject (2.16.1-1 -> 2.18.0-1)
[2009-05-29 18:39] upgraded python-numpy (1.3.0-1 -> 1.3.0-2)
[2009-05-29 18:39] upgraded qt3 (3.3.8-10 -> 3.3.8-11)
[2009-05-29 18:39] upgraded whois (4.7.33-1 -> 4.7.33-2)
[2009-05-29 18:39] upgraded xkeyboard-config (1.5-1 -> 1.6-1)
[2009-05-29 18:39] upgraded xorg-server (1.6.1-1 -> 1.6.1.901-1)

Check out http://bbs.archlinux.org/viewtopic.php?id=73064

Missing HDMI1 in xrandr after system update

Similar Messages

Maybe you are looking for