Missing header file NiDAQmxCom​ponent.h for Visual C++
Hello,
I'm having trouble compiling an example of measurement studio 8.6. I `m comiling the SpectrumAnalyzer, but getting error
in NiIncludes.h:fatal error C1083: Cannot open include file: 'NiDAQmxComponent.h': No such file or directory
I can`t find it in $Program Files\National Instruments\MeasurementStudioVS2008\VCNET\Include,
or $Program Files\National Instruments\NI-DAQ ,too.
Maybe, I had to install some other additional support.
I installed MStudio8.9 DAQmx9.0 Can anyone suggest what I am doing wrong?
Thanks
i reinstall daqmx9.0 and it works
Similar Messages
-
Missing header files when importing a shared library with labview 8.6?
Hi all,
I want to import a .dll into my .vi program but I am not able to do it...
I have created the dll following the ni website tutorial
http://zone.ni.com/devzone/cda/tut/p/id/3303#toc2
Once the dll has been created, I have tried to import it with
Tools-Import-Shared Library(dll)
After parsing the header file appears an error like this one:
void __cdecl Zdmt(LVBoolean *stop, double P, char channelName[],
TD1 *errorIn, TD14 *FFTOptions, TD12 *Calibration, char FileName[],
int32_t minRecordLength, TD26 *InstrumentHandler, LVRefNum sessionRefArray[],
LVRefNum *queueIN, TD1 *errorOut, LVBoolean *averagingDone,
HWAVES LastRecordFetched, TD24 *Impedance, TD17 *ColeColeCluster,
TD18 *FFTcluster, TD5 *InstrumentHandleOutputCluster, LVRefNum *queueOut,
int32_t *Acquired, TD6 *FreqTimeInfoCluster, double *averagesCompleted,
int32_t len);
The following symbols are not defined:
LVBoolean; int32_t; LVRefNum;
Undefined symbols can prevent the wizard from recognizing functions and parameters. To correct this problem, check the header file to determine if you must add predefined symbols. Click the Back button to return to the previous page of the wizard to add a preprocessor definitionsl (for example, "NIAPI_stdcall = __stdcall" or "NIAPIDefined = 1").
The following header file was not found in the specified header file or one of the referenced header files:
- extcode.h
To fix, click the Back button to go to the previous page and add the header file path to the Include Paths list.
I have replaced the first line #include "extcode.h" of the dll header file for #include "C:\Program Files\National Instruments\LabVIEW 8.6\cintools\extcode.h" that is the full path where the header file is located. However, new libraries seems to be missed:
- stdint.h
- MacTypes.h
Does anybody know what I have to do??
Any help will be really appreciated,
Regards,
BenjaminIf you use any of the LabVIEW cintools headers, they reference other headers too. The import wizard is written in a way that it simply skips parsing datatypes that can not be resolved due to missing header files. If your functions you want to import references such datatypes then you get an according error about any include files the wizard could not load, otherwise not. The wizard can not know which of the missing header files is the problem since it obviously doesn't know what would be in those header files.
The LabVIEW cintools headers are multiplatform, meaning they evaluate various compiler predefined defines to determine which platform they are included in. The import library wizard does not define any specific defines, since it is not really a compiler. So you have to define them. And they get adapted with each new LabVIEW version to support new compilers and compiler versions, so the defines described in the link in the first post do not have to be correct for cintools headers in newer LabVIEW versions.
All in all writing DLLs that interface to LabVIEW cintools headers should not be done by writing them and then importing them using the wizard but instead you should write the VI and create the Call Library Node, then let LabVIEW create a template C file from the context menu of the Call Library Node and copy that into your C sources and fill in the functions from there.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
Mysterious missing header files
Hello,
While trying to build some packages recently, I discovered that for some reason, my system was missing a bunch of important header files.
GL/gl.h
GL/glu.h
these were fixed by reinstalling mesa
pkg-config reported gtk+-2.0 and glade as not installed
this was fixed by reinstalling libxrender
X11/X.h
X11/Xfuncproto.h
are also missing, and I can not figure out where they went or what package I need to get them back. Does anyone know?
I suspect that this has to do with using testing and especially Xorg 7.0.
Thanks,
Arthurpacman -S xproto
-
Missing Header files oratypes.h ocidfn.h ociapr.h
Can anyone tell me where i can
find the header files oratypes.h
ocidfn.h ociapr.h
I am trying to install the
DBD-Oracle-1.06 Perl Module
I have Oracle 8.1.5 for Linux
and these file are not on the CD
Robert Steele
[email protected]It doesn't seem to be there anymore. The URLMount framework is just a link to NetFS. Try commenting out both of those includes and see what happens.
-
Missing header files in WDK/SDK 8.1
Hi,
I installed the latest WDK and SDK, but i struggling with some header files missing.
I started a new Kernel Mode Driver project in VS2013, imported ntddk.h, then IntelliSense started to pop with several errors. "specstrings.h", "kernelspecs.h", "winapifamily.h", etc., many header files missing. After some research,
i found out that those files were supposed to be at C:\Program Files (x86)\Windows Kits\8.1\Include\shared, but they're simply not there. I uninstalled and reinstalled the WDK and SDK several times, and still don't know what's actually going how.
Can someone enlight me?
Thanks in advance.are you sure installed the full desktop SDK? you can't install just the modern SDK. What version of VS are you using?
d -- This posting is provided "AS IS" with no warranties, and confers no rights. -
I'm trying to configure php3 with oracle support on Red Hat 6.0 Linux but and got error messages:
In file included from internal_functions.c:57:
functions/php3_oci8.h:53: oci.h: No such file or directoryThis continues for oratypes.h, ocifdn.h and ociapr.h.
Any suggestionsare you sure installed the full desktop SDK? you can't install just the modern SDK. What version of VS are you using?
d -- This posting is provided "AS IS" with no warranties, and confers no rights. -
Missing header file 'stdtst.h'
Hi all ,
where will i find header file 'stdtst.h' in CVI or TestStand ?
Thanks
Mukesh KumarHello mukesh121,
According to http://www.ni.com/pdf/manuals/375070c.pdf, the header file is located in <TestStand Public>\AdapterSupport\CVI.
Best regards,
= Nelu F. || National Instruments. -
Hello,
I'm having trouble using an example from Visual C, AquireOneVoltageSample. I have DAQ card PCI 6221 and I am using Visual C++ 7. I followed instructions to run Visual C programs in Visual C++. But getting compile error
c:\Tauriq\AcqOneVoltageSample\NiIncludes.h(17): fatal error C1083: Cannot open include file: 'NiCommonComponent.h': No such file or directory
I don't know where this file is, it seems to be missing or maybe I had to install some other additional support.
I am new to DAQ programming and only require to collect 2 analog input voltages. Can anyone suggest what I am doing wrong?
Thanks
TauriqHi Tauriq-
I would first make sure that you have NI-DAQ v7.4 installed to make sure that you're up to date driver-wise. This is a free download from this location.
Once the driver is installed, you can find C++ examples for ANSI C and Visual C in the directory C:\Program Files\National Instruments\NI-DAQ\Examples.
Note: Measurement and Automation Explorer will be installed automatically with any National Instruments driver and is a good troubleshooting tool, but it doesn't contain inherent support for NI devices.
Thanks,
Tom W
National Instruments -
Missing header files? Chapter Prefs Command
I am trying to send a kModifyChapterNumPrefCmdBoss command.
The documentation mentions that it aggregates the IID_ICHAPTERNUMBERPREFERENCES interface, however the documentation doesn't give us any additional information of functions to set and get the information. Any help, guidance or even hints will be appreciated.
ThanksIt's most likely your compilation strategy. When you begin to break things up into mutliple files, you cannot (always) use the gcc form:
gcc main.c -o main
as that actually does 2 things at once. It compiles main.c and then links it. That is where the undefined function comes from. It is a linker error.
To avoid this there are two things you can do. The "proper" way is to split these steps manually.
gcc -c main.c
gcc -c header.c
The -c flag tells gcc ONLY to compile the code. This will produce main.o and header.o.
Now, you can link manually, and you need to link ALL objects that contain used functions. "undefined" errors result from not linking in something that contains a function used.
gcc main.o header.o -o main
Now ./main should run as expected.
Now. There is a shorthand to this... but I would recommend using the above way, just to make you more familiar with the separation of the two steps AND what kind of errors are compiler errors vs what kind of errors are linker errors.
Shorthand:
gcc main.c header.c -o main
As with the initial usage, this combines both compilation and linking steps. -
Can't install ros-hydro-collada-parser due to "missing" header file
Hello,
I'm trying to install ros-hydro-desktop-full on this i686 arch laptop and I got stuck at compiling ros-hydro-collada-parser.
Ros-hydro-collada-parser has collada-dom from aur as a dependency. I have installed it, and all the right files appear in the /usr/include/collada-dom2.4:
[flyer@lapt ../ros-hydro-collada-parser]$ ls /usr/include/collada-dom2.4/
1.4 1.5 dae dae.h dom.h modules
The compilation fails with this:
[ 50%] Building CXX object CMakeFiles/collada_parser.dir/src/collada_parser.cpp.o
/home/flyer/.builds/ros-hydro-collada-parser/src/collada_parser/src/collada_parser.cpp:45:17: fatal error: dae.h: No such file or directory
#include <dae.h>
^
compilation terminated.
CMakeFiles/collada_parser.dir/build.make:57: recipe for target 'CMakeFiles/collada_parser.dir/src/collada_parser.cpp.o' failed
make[2]: *** [CMakeFiles/collada_parser.dir/src/collada_parser.cpp.o] Error 1
CMakeFiles/Makefile2:94: recipe for target 'CMakeFiles/collada_parser.dir/all' failed
make[1]: *** [CMakeFiles/collada_parser.dir/all] Error 2
Makefile:116: recipe for target 'all' failed
make: *** [all] Error 2
==> ERROR: A failure occurred in build().
Aborting...
The full output is here: http://pastebin.com/gAe8MNwb
It works fine on my 64bit arch system. The collada-dom folder is exactly the same and cpp file (collada-parser.cpp) is exactly the same.
How does this <dae.h> include work on my 64bit system and shouldn't it be <collada-dom2.4/dae.h> instead?
Do you have any ideas of what could be the cause of this problem?Error "Installer Failed to Initialize" | Install desktop application | Windows
-
File and Printer Sharing for Microsoft Networks is missing
I have a Server 2012 Hyper-V VM that is missing the File and Printer Sharing for Microsoft Networks. When I try to Install the service it is not listed. The only service listed is Windows Network Virtualization Filter driver. I have the install media but
I don't know where the driver would be located. I'm hoping someone can tell me where it is located.
Update:
I am trying to run Enable-NetAdapterBinding -Name Ethernet -ComponentID ms_server but it's not working and it's giving me this error.
Enable-NetAdapterBinding : No matching MSFT_NetAdapterBindingSettingData objects found by CIM query for instances of
the ROOT/StandardCimv2/MSFT_NetAdapterBindingSettingData class on the CIM server: SELECT * FROM
MSFT_NetAdapterBindingSettingData WHERE ((Name LIKE 'Ethernet')) AND ((ComponentID LIKE 'ms[_]server')). Verify query
parameters and retry.
At line:1 char:1
+ Enable-NetAdapterBinding -Name Ethernet -ComponentID ms_server
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (MSFT_NetAdapterBindingSettingData:String) [Enable-NetAdapterBinding], C
imJobException
+ FullyQualifiedErrorId : CmdletizationQuery_NotFound,Enable-NetAdapterBinding
Vincent SpragueOk, fixed it, I found the netserv.inf file in c:\windows\inf and tried to use it to reinstall File and Printer Sharing. However File and Printer Sharing was not listed. I copied the netserv.inf file from another Server 2012 VM and was able to install File
and Printer Sharing using the copied NetServ.inf. After rebooting the server I was able to access network shares on the server.
Vincent Sprague -
Templates e Header Files in Java?
Hi Everybody...
So , I need do templates in java and I want understand how work one Header in Java? I think anyone not undestand this part...
So
I have one project in C++, I want convert this project for Java...and this project use the Header file(I created this header) and templates too...
I want know how I do this?because in the Java haven?t template...:(
thanks for the Help if you can help me...thanks for nowHi Everybody...
So , I need do templates in java and I want
understand how work one Header in Java? I think
anyone not undestand this part...
So
I have one project in C++, I want convert this
project for Java...and this project use the Header
file(I created this header) and templates too...
I want know how I do this?because in the Java haven?t
template...:(
thanks for the Help if you can help me...thanks for
nowThere is a huge change in mindset from C++ to Java. I came from C++ and didn't miss header files a bit, so I don't guess I understand what functionality a C++ header file gives you that you're lacking in Java.
Instead of C++ templates, there are Generics in java, but they don't behave in exactly the same way. I have yet to really understand how Generics are treated by the compiler, but they are certainly different. -
E72 and SIP, look like missing a file
Hi All;
I have a Nokia mobile model E72 and it look like I am missing a file that is needed for SIP service. Actually I have SIP settings, but when I need to place a call, then there is no option called Internet call.
What could be needed (which file) so the Phone will become supported for Internet Call?
By the way: I am facing a problem that some Nokia Mobiles which work fine with SIP, they do not work fine if the wireless service was via the mobile operator (like 3G), but it work fine if the wireless service was via an access point router. So what is the solution for this case? Actually IPhone and some Nokia phones does not have this problem.
Any advise?On your Mac you download the latest version through the App Store, not the iTunes Store. The iTunes Store gets you the iOS (mobile) version. The App store gets you the OS X (Mac) version. They are two separate apps.
-
Hello,
I have installed VS2010 Professional. I have done a full install. The I install the 2010 redistributable and 2010 SP1. So I think I have installed all the needed products. But my include files has only 3 files :(. anmintrin.h, srv.h, wmiatlprov.h. My colleagues
who have installed the same three products have some 200 header files. My guess these header files are coming from some SDK or so. I have 5.0, 6.0A, 7.0A. 7.1A, 8.0, 8.0A SDKS installed. What am I missing?
Please check this http://stackoverflow.com/questions/13656856/cant-get-visual-studio-c-include-file-excpt-h-to-get-installed and there the person tells to practically remove all and install all and another answer says just copy it. My hope is Microsoft
might have a more logical and technical answer than doing something blindly without rhyme or reason
A clear cut answer might help the community.
thanks
anandaHi Ananda Vardhana,
What about your issue now?
If you have resolved it, you can share the solution here, which will be beneficial for other members with the same issue.
If you did not, whether you can provide us more information as Barry said for resolving this issue?
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
The OCI header files are missing from the Oracle 8 for Linux
trial CD. Everything else works fine, but we can't develop any
client applications without an OCI interface.
I tried using the header files from Oracle 8 Solaris SPARC, but
the resulting program core dumps in olog().
Does anyone know where I can get these files? If a purchase a
production version, will they be included?
I have a bare bones Linux ODBC driver for Oracle that I cannot
compile without them.
Thanks,
- Mark Butler
nullStefan (guest) wrote:
: Mark Butler (guest) wrote:
: : The OCI header files are missing from the Oracle 8 for Linux
: : trial CD. Everything else works fine, but we can't develop
any
: : client applications without an OCI interface.
: : I tried using the header files from Oracle 8 Solaris SPARC,
but
: : the resulting program core dumps in olog().
: : Does anyone know where I can get these files? If a purchase
a
: : production version, will they be included?
: : I have a bare bones Linux ODBC driver for Oracle that I
cannot
: : compile without them.
: : Thanks,
: : - Mark Butler
: The header files are in the directory $ORACLE_HOME/rdbms/demo
: Yours
: Stefan
Do you happen to know how to link those examples?
It couldn't have been too hard to include a Makefile!
null
Maybe you are looking for
-
am trying to import from macbook to macbook pro using migration assistant...tells me that i need to update old mac but macbook tells me it is up to date???? any hints on how i fix this issue? running 10.4.11 and it wont update further...please help.
-
My wifi is not working. It has no indication. I am living in Indonesia but I bought my iphone from apple online store. Can anyone help me how to fix my problem?
-
Hi Experts, How to call the webservice inside BPM? How to do the wsdl file configuration/import and etc. Regards Sara Edited by: Sara D on Jan 18, 2008 6:36 AM
-
Generating Runtime version of a KB Object of Variant Configurable product
Hi All There is a VC Product which needs to be transported to the CRM server via Middleware. Hence I need to create a Knowledge Base (KB Object) and generate a Run-Time version of the same. I am getting an error while generating the Run Time version.
-
[update July 5, 2007] k3b 1.0.2-1
After Install K3B 1.0.2-1 K3B is frozen. several restarts and it takes long long time to start up.