Missing History and Snapshot panels, not found in Window dropdown menu

Both my history and snapshot panels disappeared (LR5) suddenly, and neither appears in the Window>Panels dropdown menu.
This *may* have occurred when I was trying to bring up my target collection (command B).  I must have accidentally hit some other key(s), because suddenly I was taken to the last folder I was in. 
I'm afraid to close LR and reopen it, in case that makes the problem worse.  I really want those panels back!

Folders should not appear in the Develop Module, this panel is in the Library module only
The folders didn't appear in the Library module. 
But now I have clicked something else (and I don't think it's Wacom-related now) ... it was something in the Window dropdown menu, and once again, I get the folders back but the snapshots and history are gone!  Aaarggh.

Similar Messages

  • I'm using Windows Illustrator CS4, and i cant find the artboard menu pallate. Its not showing under Window Dropdown menu either.

    I'm using Windows Illustrator CS4, and i cant find the artboard menu pallate. Its not showing under Window Dropdown menu either. How can i locate it or toggle it to turn on again?

    I'm not sure what artboard view is, sorting and naming artboards is not available in CS4 either, sorting however is possible via script workaround,
    Introducing: re Arrange Artboards v2 Script

  • Cannot remove autocomplete entry from address bar; have already cleared history, and entry is not in the drop-down menu of the address bar either.

    I am having problems removing an autocomplete entry from my address bar; I have tried clearing my history, so it's no longer in that, and I do not have it bookmarked either, so it's not getting the URL from that location either. The autocomplete entry isn't even showing up in the drop down menu, so I can't even scroll through that to delete it.
    Basically, I want to be able to type "st" and go to "store.steampowered.com"; however, despite numerous times of typing in "st" and then going down into the drop-down menu to choose "store.steampowered.com", the bar continues to autocomplete "steamtrades.com", which is exceptionally annoying because I do not have that website bookmarked, or in my history, yet it continues to autocomplete to that address, which I do not want it to autocomplete to, and cannot figure out how to remove because I've already cleared my history multiple times, do not have it bookmarked, and it is not showing up in the drop down of the address bar for me to go down and force delete it.

    Did you try to remove some letters from steamtrades.com to see if that bring this entry up in the drop-down list?
    If it is not in the history then it might be present with a typed=1 flag indicating that you have typed or pasted it in the location bar.
    You can use the SQLite Manager extension in Firefox to inspect the places.sqlite file to see if this entry comes up in the moz_places table.
    *SQLite Manager: https://addons.mozilla.org/firefox/addon/sqlite-manager/
    <pre><nowiki>SELECT datetime(visit_date/1000000,'unixepoch') AS visit_date, url, title, visit_count, frecency
    FROM moz_places, moz_historyvisits
    WHERE moz_places.id = moz_historyvisits.place_id AND url LIKE '%steamtrades.com%'</nowiki></pre>

  • Current server is the coordinator and transaction is not found

    Hi,
    We're using Weblogic 8.1 SP3. We have a single weblogic domain and 2 clusters in it. EAR1 is deployed in cluster 1 and EAR2 is deployed in cluster 2. EAR2 is compiled and created using j2ee.jar and not weblogic.jar.
    We have a MessageDrivenBean which is CMT / Required in EAR1 calls a BMT Stateless Session Bean in EAR2.
    A new transaction is begun in the BMT SB method and commit or rollback is called based on exception. A RuntimeException is thrown back to the MDB in case the transaction is rolled back in Bean Managed SB.
    Sometimes from the Bean Managed SB the following exception is thrown:
    javax.transaction.TransactionRolledbackException: Current server is the coordinator and transaction is not found. It was probably rolled back and forgotten already.
         at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
         at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:284)
         at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:244)
         at com.oakgrovesystems.reactor.frontDesk.EJBFrontDeskBean_1gq9kv_EOImpl_813_WLStub.handleRequest(Unknown Source)
         at com.oakgrovesystems.reactor.requests.ReactorRequest.send(ReactorRequest.java:212)
         at com.oakgrovesystems.reactor.client.EJBReactorProxy.sendRequest(EJBReactorProxy.java:44)
         at com.oakgrovesystems.reactor.client.AbstractReactorProxy.handleRequest(AbstractReactorProxy.java:52)
         at sun.reflect.GeneratedMethodAccessor153.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at tavant.bpm.client.proxy.DynamicFailoverReactorProxy.invoke(DynamicFailoverReactorProxy.java:84)
         at $Proxy11.handleRequest(Unknown Source)
         at tavant.bpm.client.ProcessHome.handleRequest(ProcessHome.java:298)
         at tavant.bpm.client.ProcessHome.startProcess(ProcessHome.java:87)
         at tavant.bpm.client.processor.CreateWorkflowInstance.startProcess(CreateWorkflowInstance.java:70)
         at tavant.bpm.client.processor.CreateWorkflowInstance.invoke(CreateWorkflowInstance.java:51)
         at tavant.bpm.ejb.AsynchronousProcessorMessageBean.onMessage(AsynchronousProcessorMessageBean.java:58)
         at weblogic.ejb20.internal.MDListener.execute(MDListener.java:370)
         at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:262)
         at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2678)
         at weblogic.jms.client.JMSSession.execute(JMSSession.java:2598)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
    This is not consistently reproducible though it happens when server is heavily loaded. When this exception occurs, the transaction in the BMT Session Bean is actually getting committed! The message gets redelivered from the MDB.
    What could be the problem?
    Regards
    Sandhya

    I'm seeing a similiar problem on our servers recently and thought I would add my problem as well. We are using Weblogic 8.1; don't know which SP is in production. We have an EAR file with an SB EJB that puts messages in a queue. The EAR is deployed in a cluster along with the queues. The errors below occurred in 3 of the 4 WLS instances in our cluster. This happened during a peak period and lasted for several seconds in Production.
    ###<Jul 1, 2005 11:18:12 AM EDT> <Warning> <RMI> <exsdxtxeax1x.prod.xxxx.xxx> <ems-04> <ExecuteThread: '12' for queue: 'web
    logic.kernel.Default'> <<WLS Kernel>> <> <BEA-080006> <Failed to associate the transaction context with the response while marshall
    ing an exception to the client:
    javax.transaction.TransactionRolledbackException: Current server is the coordinator and transaction is not found. It was probably
    rolled back and forgotten already..
    javax.transaction.TransactionRolledbackException: Current server is the coordinator and transaction is not found. It was probably
    rolled back and forgotten already.
    at weblogic.transaction.internal.TransactionManagerImpl.sendResponse(Ljava.lang.Object;)Ljava.lang.Object;(TransactionManag
    erImpl.java:1438)
    at weblogic.rmi.internal.BasicServerRef.associateTxContext(Lweblogic.rmi.spi.InboundRequest;Lweblogic.rmi.spi.OutboundRespo
    nse;)V(BasicServerRef.java:490)
    at weblogic.rmi.internal.BasicServerRef.postInvoke(Lweblogic.rmi.extensions.server.RuntimeMethodDescriptor;Lweblogic.rmi.sp
    i.InboundRequest;Lweblogic.rmi.spi.OutboundResponse;Ljava.lang.Throwable;)V(Optimized Method)
    at weblogic.rmi.internal.BasicServerRef.handleRequest(Lweblogic.rmi.spi.InboundRequest;)V(Optimized Method)
    at weblogic.rmi.internal.BasicExecuteRequest.execute(Lweblogic.kernel.ExecuteThread;)V(Optimized Method)
    at weblogic.kernel.ExecuteThread.execute(Lweblogic.kernel.ExecuteRequest;)V(Optimized Method)
    at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:178)
    at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread;)V(Unknown Source)
    >

  • HT201272 I purchased three autobooks from itunes last weekend and after updating my ios to 7 they no longer appear. I looked at my purchse history and they are not showing in my purchase history. I do have the receipts for the charge. How do I restore the

    I purchased three autobooks from itunes last weekend and after updating my ios to 7 they no longer appear. I looked at my purchse history and they are not showing in my purchase history. I do have the receipts for the charge. How do I restore these?

    "I did make a full back up of my phone prior to updating the iOS"
    Itunes content is not incliuded in the backup that itunes performs.
    Audiobooks are not part of icloud and cannot be redownloaded.
    You can try contacting itunes support and asking for an exception.

  • I can find many purchases in my purchase history, but they are not found when I "Check Available Downloads." How else can I download my purchases?

    I can find many purchases in my purchase history, but they are not found when I "Check Available Downloads." How else can I download my purchases?

    what happened to the initially downloaded files ? did you make a backup ? do you use time machine ?

  • Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it

    Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it.
    This happens only when a load my pdf file on my server, because if i click on the link when the file is on my iPad, the page opens without problem.
    Any help please?
    thanx

    the % sign is often used when there's a space in a name. HTML doesn't like spaces so it fills them with % or %20
    try, on the end of that link, see if there's a space built into the page or the link when the page was made
    On the web address you may be able to 'backspace' at the end and erase that space to get the address, but whomever made the page possibly put a mistake in the link

  • Hierarchy with HIESID 2 and SVER  was not found

    Hello Experts,
    I am in dire need, as I need to change/add some authorizations.
    When selecting a hierarchy authorization to add, I receive the following error:
    "The hierarchy with HIESID 2 and SVER  was not found"
    this happens not only when I want to add an authorizations, but also when looking up existing ones and trying to access the authorization node.
    I have searched the forum and the guidelines but unfrtunately I did not find any helpful information.

    Found a note that can correct this:
    Note 1530624 - RSRHIEDIR_OLAP inconsistency,Deleted entries of INFOAREAHIER

  • [svn:fx-4.0.0] 14153: Fix getStyle/ setStyle when a module factory is not set and a skin not found RTE.

    Revision: 14153
    Revision: 14153
    Author:   [email protected]
    Date:     2010-02-12 14:18:27 -0800 (Fri, 12 Feb 2010)
    Log Message:
    Fix getStyle/setStyle when a module factory is not set and a skin not found RTE.
    QE notes: None.
    Doc notes: None.
    Bugs: SDK-25376, SDK-25444
    Reviewer: Alex
    Tests run: checkintests, full Mustella
    Is noteworthy for integration: No.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-25376
        http://bugs.adobe.com/jira/browse/SDK-25444
    Modified Paths:
        flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/core/UIComponent.as
        flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/supportClasses/Ski nnableComponent.as

    Problem Resolved!
              I found out that I had 'http' instead of 'httpd' in the statement where I
              registered my servlet, SqlServlet.
              Now, I am having difficulty with hot deployment. The server is returning
              error 404.
              

  • My iPhone doesn't work on Bluetooth. It turns on but I doesn't Find another device and it's not found by other devices as well. What is the solution

    My iPhone's(iOS7.0) Bluetooth connection doesn't work. It turns on but it doesn't Find another device and it's not found by other devices as well. What is the solution?

    Supported bluetooth profiles http://support.apple.com/kb/ht3647

  • How do I verify my email account for Icloud if I try to open the link and it marks "not found", How do I verify my email account for Icloud if I try to open the link and it marks "not found"

    How do I verify my email account for Icloud if I try to open the link and it marks "not found"

    Welcome to the Apple Community.
    Put in a request for another verification e-mail to be sent to you.
    Start here, change your country if necessary and go to manage your account 
    Also check your Mail rules and filtering, the verification mail may be going to a junk folder or even being deleted altogether. You may also wish to contact your mail provider to see if their spam filters are removing the email before it gets to you.

  • Package javafx.json and javafx.gui not found

    hi ,
    getting package javafx.json and javafx.gui not found errors.... have the package names changed ,, if so pls tell new names of these packages ......

    Hi Josh,
    thanks for your quick reply. I agree that javafx.gui has been replaced by javafx.scene package.
    But can't find reference to javafx.json package.
    Saw its use on http://blogs.sun.com/clarkeman/entry/javafx_script_and_json_weather .
    I'm trying to pass a json from my java code and use it in my javafx code. But in javafx code it comes as plain string

  • Dotfuscator CE error: External type not found System.Windows.Input.ICommand,PresentationCore

    Preemptive will not support CE so I am trying here...
    I have an application targeting the .NET Framework 4.0.  It builds and runs fine but I cannot get it to compile in Dotfuscator CE. I am stuck.
    Dotfuscator CE (v5.0.2500.0) with Visual Studio 2010 SP1.  Here is the Error:
    Resolving method references...
    External type not found System.Windows.Input.ICommand,PresentationCore, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.
    Build Error.
    The problem seems to originate from ICommand being moved from PresentationCore.dll (in NET 4.0) to System.dll (in NET 4.5).  Studio handles this and compiles fine as I am targeting NET 4.0 and the references all point to
    C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0\
    Dotfuscator CE however does not seem to handle it correctly and I am not sure how to correct the issue.  Any help would be greatly appreciated!!

    Hi Perter,
    Thanks for your response.
    External type not found System.Windows.Input.ICommand,PresentationCore, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.
    Maybe it is related to the references in your project.
    Reference:
    The type 'System.Windows.Input.ICommand' exists in both 'PresentationCore.dll' and 'System.dll'
    Since it is not the VS General issue, I am moving your question to the moderator forum ("Where is the forum for..?").
    The owner of the forum will direct you to a right forum. Thanks for your understanding.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How can I remove apps from my itunes library in version 11.0.0.163? The checkbox is no longer there in the new version and I do not see a drop down menu.

    In the new iTunes version 11.0.0.163 I tried to delete a free app but it still shows after I deleted it from all my Apple devices. The checkbox in the previous version of iTunes does not seem to be present in the new version and I do not see a drop down menu. And there are no Help menu choices either. I guess, I will otherwise wait for the new update to iTunes as of 12.10.2012.

    With iTunes 11 on PCs the drop-down menus are hidden by default - control-B should get the menus to show
    This screenshot is from a Mac, but it should be similar on a PC :

  • My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please ad

    My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please advise

    Try Andrei Cerbu's post here, JF Fourie's post here, or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update. See also TS1363: iPod: Appears in Windows but not in iTunes.
    tt2

Maybe you are looking for