Missing HP Utility (Officejet Pro 8600 Plus); need to reinstall - cannot uninstall printer software

I had to wipe my iMac and resinstall IOS Mavericks (10.9.5). Printer (Officejet Pro 8600 Plus, 9N11g) is working, but will no longer scan (double-clicking icon results in "original item cannot be found") and the HP utility icon on dock is missing, replaced with a "?." I located directions to uninstall printer software so I can reinstall... but there is no longer any HP folder or "HP Uninstaller" on my Mac HD. Neither is there an HP folder within Library/Printers folders. Spotlight search shows no HP or Hewlett-Packard folders on my hard drive.
I have downloaded an "HPPPrinterDrivers3.0.dmg" and "HP-Injket-SW-OSX-Mavericks_v12.34.37.dmg," one of which I'm hoping will contain updated software/drivers to reinstall the printer and hopefully the HP Utility so I can regain scanning function, but I cannot figure out how to remove the current printer software, and I do not know if those are the currect files to use. I understand just deleting the printer will not suffice.
Can anyone provide step-by-step instructions on how to remove the software as well as installation (since I am unclear if I have the correct dmg files)? Thank you.
This question was solved.
View Solution.

Hi,
First I would suggest repairing the disk permissions, then try reinstalling the HP Software.
Follow the steps below to repair the disk permissions:
1. Open the the Applications folder.
2. Go to the Utilities folder.
3. Double-click on Disk Utility.
4. Select the hard drive containing the boot volume.
5. Go to the First Aid tab and select Repair Disk Permissions.
Note: This process may take several minutes depending on the Mac and amount of permissions that need to be repaired. The Progress Log will indicate when the process has been completed.
Once you are done, run the HP-Injket-SW-OSX-Mavericks_v12.34.37.dmg file and follow the steps on screen, be sure to select the HP Scan option while installing to get full functionality of the software.
Please try the steps above and let me know the results,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

HP officejet pro 8600 plus need to reset, but no screen access due to head error

hi,
I had some HP's 8600 but one of them it is dead as printer and it was replaced.
I need to use it only as scanner (no printing since its problem are the printing heads). The problem I cannot access to the menu through the screen since it is stock with the message mentioning the fail on printing head. The next option it is to watch a demo about heads.
Im trying to access in order to fix a new static ip for the scan.
Is there a way to reset so the printing gets an dhcp ip add? So far the scanner works fine through USB connection.
Thanks in advance

Hello @Rodrigo_cl,
Welcome to the HP Support Forums!
I understand that your HP Officejet Pro 8600 Plus e-All-in-One Printer has encountered a hardware Printhead failure and is not allowing you to scan using a static IP because of this. I would like to assist you today with resolving this issue.
Now, due to the error on the front panel of the printer, you will not be able to perform any resets on your machine. But, if your printer is currently on the network with an automatic IP we can utilize the embedded web server to configure a static IP.
Is your printer currently on your wireless or wired network?
Once I know if your printer is currently on the network, I can guide you towards configuring the static IP through the computer. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

Hi I have just replaced my black XL cartridge and was asked to share info with HP on my
HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g
part of that info gave details to HP of the actual amount of prints so I'm really interested to know what the number of pages I printed off is
does anyone know a way I can find this info out please?
thanks
This question was solved.
View Solution.

Touch the front panel and use the back arrow if needed to get to the home screen. Next touch the four ink droplets at the top right of the screen, then touch "Print Report". Items 12-14 will be the total pages, color pages and borderless pages printed.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Officejet Pro 8600 Plus e-All-in-One - terrible print & scan options

I just purchased an HP Officejet Pro 8600 Plus e-All-in-One an the print options look like they were written by someone from the 1990s. There are no options for lower resolution - only draft, normal, best and no option for black and white - other than grayscale. The print options box is the default box that was originally develped in the 1990s - no kidding. I also tried scanning some items and the box to see the scan is about 5" x 5" and there is absolutely no way possible to see what was scanned. I originally loaded the software using the disk provided witih the printer, but then I went on line and downloaded the "Full" version - which loaded exactly what was on the disk. I can not believe HP is even selling this thing with these types of drivers. I loaded the drivers onto my HP Desktop, running Windows 7 home, 64 bit and my HP laptop running Windows 7 Ultimate, 64 bit. Both HP computers are Intel I7 Quad core computers w/ 9 & 12 Gb of RAM respectively.
What gives? Do I need to return this thing because it certainly does not work properly and is not up to the HP standard we expect - especially for the $300 it costs to buy the thing. I bought this all in one because HP refuses to update the drivers of my older HP scanner to support Windows 7. That scanner showed the preview with a full screen, allowed me to change resolutions of scans, colors, etc.
Has anyone else experienced this type of garbage?

I agree the HP customer services and product services suck. I have an Officejet Pro 8500 and consistently had problems.
I think I'll change to a Cannon printer or another company. It is apparent that HP does not care.

HP Officejet Pro 8600 Plus losing wireless connectivity, cannot scan to computer

In our office, we have roughly 4 computers using the HP Officeject Pro 8600 Plus, all of which are connected wirelessly. The printer was previously connected to the internet wirelessly with no problems. A couple of days ago however our computers started randomly disconnecting. The printing function would work for a bit, then disconnect. I found the only solution to this problem was to hit the button on our wireless router that resends the wireless signal out for connectivity.
We hardwired the printer with an ethernet cable and I myself didn't see any further problems regarding connectivity but a couple of the other computers had spotty connections. Again, each time this can be remedied by hitting the button on the wireless router.
Today however we had an additional problem, after trying to scan a document through the automatic document feeder, the printer said it was jammed (although it wasnt). When we went to rescan, the scan to computer function was no longer working. I can scan by hitting the scan button on my HP Printer Assitant interface, and I can also scan to email, but cannot scan to computer.
I have gone through several forums and haven't been able to find a solution. I personally use Windows 8, but other people in our office are using older versions of Windows. We've tried unplugging, restarting, hardwiring, resetting wireless settings, uninstalling, etc. etc. Before a few days ago the pritner was working fine for a number of months.
If anyone has any ideas they would be greatly appreciated.

Hi rtaw,
Welcome to the HP Forums!
I understand that you cannot scan to computer, and that you are losing wireless connectivity, with your HP Officejet pro 8600 Plus. I am happy to help you with this issue!
Please take a look through this wireless guide. Printer Does Not Maintain Wireless Connection.
For the scanning, please see this guide. A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning.
Hope this information helps you, and let me know if you have any more issues!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Paper jams when being faxed on my HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

When I go to send a fax, the paper goes in until about half way then the right side begins to wrinkle the paper and jams up. I have tried several things to fix it but no luck.

Welcome to the forums HerkDia ,
I have some suggestions for you to try for the problem you're having with your Officejet 8600 Plus jamming the paper when you fax.
Check out these guides:
Printer Paper Tears, Wrinkles, or is Damaged while Printing from the All-in-One
A 'Paper Jam' Error Displays on the HP Officejet Pro 8600 e-All-in-One Printer Series
The Automatic Document Feeder (ADF) Does Not Pick Up Paper
Update the firmware: Getting the Latest Firmware and Product Updates
Ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
If the steps do not help any, I would lastly recommend calling HP to inquire about a replacement or trade in.
HP's contact info:
If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada,: click here.
Best wishes
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Officejet Pro 8600 Plus Paper Tray Jammed crooked in printer

Paper tray is jammed crookedly in printer. It will not come all they way out of printer and will not completely close (remains 1 1/2" Exposed. How do I remedy?

Hello @LadyLou1, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing jam issues. I'd like to help!
I would recommend starting by removing the ink cartridges, and performing a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest following the steps laid out in this document:
A 'Paper Jam' Error Displays on the HP Officejet Pro 8600 e-All-in-One Printer Series
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

OfficeJet Pro 8600 Plus connected to network but cant print

My OJ Pro 8600 was previously configured and working properly, but has stopped. I was able to print off of 3 computers and a phone. All have the same IP directed toward the printer and the printer has the IP as well. I have reset the network, reset the printers network settings and the set them back up, ensured the computers have the correct ip address for the printer as well. I have tried to print the from the computers with no luck. The printer does pull a proper IP .120 in a .0 network with default gateway matching all the computers which is pingable. Printer doesn't show in the arp table either.
The computers can't find the printer, neither can the phone and the same from printer to computer when attempting to scan to the computer. I have checked the WIA on all computers, restarted the service also.
Also tried manually setting the IP on the printer and still no luck. My wireless range hasn't changed as I'm still within signal distance from the router with a strong signal.
Tried Print and scan Doctor - no luck
I'm at a total loss minus hooking a computer directly up to the printer at this point.
I keep thinking 'PC load letter' and laugh as this must be something small i'm overlooking..
HELP?
Problem solved - full reset on router and network settings on printer.

@n1cholas
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

HP Officejet Pro 8600 Plus....poor photo printing

Hello,
The printer above seems to print grainy photos on Kodak photo paper. My old Canon MP830 printer (whose scanner broke but can still print) seems to print superior photos with no noticeble graininess. I am using best quality settings in both cases. I would have expected a much newer printer to print much better than an old broken Canon one. Is this a known issue with the printer?
Thanks

There are a few things to check. What paper settings are you using? I would suggest you try setting "Other Photo Papers" or "HP Premium Plus Photo Papers" rather than leaving the setting on Automatic.
Be aware that the Officejet 8600 uses pigmented inks which may not be compatible with some photo papers. You might try HP Advanced Photo Paper.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Macbook Pro running Maverick doesn't recognize Officejet Pro 8600 Plus as a scanner

I am a new user to the Macbook, transitioning from Windows. I started with a preexisting Offciejet Pro 8500 but couldn't get it to work and discovered there were no Maverick drivers. I then bought and installed the Officejet Pro 8600 Plus wirelessly. I downloaded the HP software package for Mac. I can print. I can scan from the printer to the computer. I can use the HP Scan utility (although the HP apps folder also contains the 8500 apps and I'm not sure which is which). However, under System Preferences Printers and Scanners it only lists the 8600 as a printer and faxer; it does not appear under Scanner. And I cannot access it using PDF Converter for Mac, either. And it refuses to scan an entire legal page, stopping at the letter page limits, whether I use the document feeder or just place it on the glass.
( I also cannot figure out how to set up Network scanning - it asks for a folder address and I am not familiar with iOS nomenclature.)

Hi lahrm
I understand you are having issues scanning on the Maverick.
I will be happy to assist you with this.
I have included a document for how to scan on the Maverick.
I have provided a document for connection issues.
This document provides directions for scanning to a network folder.
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Officejet Pro 8600 Plus will not print but is connected and says that the print job is 100% Complete

Hi All,
I'm printing from a MacBook Pro using OSX Lion. It says that Officejet Pro 8600 Plus is connected and that the print jop is
100% complete except that nothing comes out of the printer. I've done all of the test prints and they've printed just fine.
I tired all of the troubleshooting steps listed on the support guide and still nothing. HELP!

Not a reply but another plea for help.
There seem to be so many people with wireless problems that a) it seems silly to start a new thread and b) which one to enter my own plea.
-Printer bought about 2~3 weeks into Sept 2012
-Installed onto Macbook Pro running Lion (full updated at that time)
-Both wireless scanning from printer to computer and initiated from computer worked fine.
-Printer, with full choice of duplex, layout etc, worked fine. (Even left 5star feedback somewhere!)
-Set up eprint. That OK, too. Fine from iPad2 and SE Arc S printing photos.
-Somewhere along the line it stopped communicating with my MBP
-Out of interest, since there seemed to be no problems with an Acer laptop running Vista, I booted the MBP from an external drive on which I'd done a backup of my 10.6 system iMac (>300Km away: can't try that). Installed HP software from disc. Seemed fully functional. Odd. Very odd.
-Restarting with Lion on MBP, tried again. Looks as if it might work, but loses connectivity. Tried manual address on printer.
-Booting from 10.6 system again, reinstalled Lion on MBP (wondering if conflict between HP and Apple updates)
-Reinstalled HP software from disc.
Still didn't work.
-Brought Lion up to date. Downloaded most recent dmg file from HP. Looked for updates. Have applied firmware update to printer
8600 doesn't list my MBP as available computer to scan to
[But all the test pages done whilst in HP Utility, and others, get sent through]
Am getting rather fed-up with all this; never, ever before have I had so much printer problem.
There seem to be a number of Lion users out there with the same problem. So far -but very infrequently tried- other machines/systems seem OK, therefore I am coming to the conclusion that it is an Apple<> HP conflict. If not sorted soon the printer will be returned as it is not fit for purpose. I'll revert to using my seldom problematic, non duplex A3 Brother.
Hrumph
Please help, someone! Either with a pointer to something I've not yet tried or by analysis and rapid availablity of updated software.
Thanks,
Mike W

How or where do I find the printer year? HP OfficeJet Pro 8600 Plus

How can I get the printer year for the HP OfficeJet Pro 8600 Plus? I have looked in printer staus report and the various labels I can find on the printer itself. I'm sure I'm just missing it.I bought it new, so I do not have any reason to think the information was removed prior to purchase. Thanks

The printer status report has in line 47 the date (rounded to the week) the printhead was installed. Except in the rare case the printhead has been replaced this would correspond to the date the printer was installed.

HP Officejet Pro 8600 Plus will not copy even after hard reset

HP Officejet Pro 8600 Plus on Windows 8 OS
Will print from computer; will scan documents & save to computer; will NOT copy document on the unit.
Shut down printer; unplugged from wall and back of unit; held on/off button for 60 seconds; plugged back in; started unit.
Placed document on glass; hit copy; hit black; Unit pulls sheet of paper; unit scans document (squeaks while scanning); after period of time, it spits out paper & reads "copy cancelled", but does not clear or return to home screen.
HELP!!
This question was solved.
View Solution.

Hello,
Please check your private message inbox for the reset I'm going to send you.

HP officejet pro 8600 Plus shuts down on its own while making numerous copies.

My printer HP officejet Pro 8600 Plus keeps shutting down if I print or make more than 5 copies then gives me a message to avoid damage shut down the printer with the on button. Well it shuts down on its own.

Hello mb_bernhardt,
Welcome to the HP Support forums. I understand that your Officejet Pro 8600 Plus printer is giving you a Printer Failure message and then the printer shuts down.
I’ve included the A 'Printer Failure' Message That Might Include an '0x610000f6' or '0x61xxxxxx' Error Code Displays o... document. If the error message that you’ve received includes an Error code there is one set of instructions to follow, and if there is no Error code there is another set of instructions to follow.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Officejet Pro 8600 Plus output tray miss-installed

The output tray on my new Officejet Pro 8600 Plus is partially miss-installed. There is a clip on each side of the underside of the output tray which is supposed to engage tips on each side of the frame for the paper tray. Apparently, when the output tray on my unit was installed at the factory, the clip on the left side ended up above the tip which it is supposed to engage. This leaves the output tray slightly tipped to the right and results in output pages not stacking as neatly as they should. This could be easily corrected if someone would tell me how to disengage the output tray from the body of the printer. It's been working fine, I don't really want to have to take it back for an exchange just to correct what could be easily fixed by removing the tray and pushing it back on carefully while engaging both clips.

Hello Goliad,
To get the best answer and assistance to your question please post it on the printer forum. This forum is a dedicated for desktops and the printer have experts available who will be more than happy to help you.
Hope everything works out for you
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Missing HP Utility (Officejet Pro 8600 Plus); need to reinstall - cannot uninstall printer software

Similar Messages

Maybe you are looking for