Missing IBM Infoprint after installing driver

I installed the OS X package for the IBM InfoPrint 1130 from opendrivers.com. HOwever, after installing it, doing Add in the Printer setup, it still isn't in the list. I am trying to install it for an IP printer.
TIA
G5 2G Dual

Someone made a mistake - that driver shows up in the Lexmark group.

Similar Messages

Missing file system after installing in SSD

Missing file system after installing in SSD MacBook
Hi All
I recently installed a SSD drive in my Macbook, I used the Disk Utility to clone the old HDD.
When i reboot the machine with the new disk I get the image of a folder with question mark.
If i reboot the machine again and hold the alt key at the chime I can see two disks.
One called SSD and another called Recovery.
if i choose the SSD the OS starts as normal and if i choose the recovery option and check the disk with disk utility
it tells me that everything is fine.
Any ideas how i can make the machine boot as it should without having to hold down the alt key a start up??

Hi i tried this and just got the big symbol of doom at start up.
However, a little terminal witchcraft did the trick!
sudo bless -mount /Volumes/"Macintosh HD" -setBoot

Missing Solaris MDBexec after install/reboot

I installed Solaris 10 on a system with the DVD (iso checksummed ok). After install when I reboot the system I get the message "Missing Solaris MDBexec" and the computer hangs. What is happening?
System has 256MB memory, Memorex DVD drive, 10GB hard drive and Intel Celeron MMX 500MHz processor.

Thanks for the info. I had to install using option 4
and delete all the partitions including the boot
partition to get it to go in correctly.That is, you had the system installed with a separate boot partition
when the HDD complained about the "missing Solaris MDBexec"?
Does it work now, after removing all partitions and installing from
scratch, without the separate boot partition?

BeatsAudio missing/replaced after Installing Windows 8.1

Hi,
When I bought my laptop (HP Pavilion 15-p044tu) it had Windows 7 installed. Also, BeatsAudio controler installed. Then I installed Windows 8.1 64bit (clean install, not upgrade from 7) and it required a full format of my HDD. So all the drives got erased including the one which had Driver & OS Backup stored.
After Installing win8.1, I went to HP support page for my laptop and manually downloaded the drivers (Including Audio drivers) from there. Please note that, some of the drivers were installed automatically by windows and there is no "unkown device" showing in my device manager's "other devices" tree.
The problem I'm facing is that there is no BeatsAudio interface anywhere. It's been replaced by "Realtek HD audio". Even in the control panel where there was a Beats Icon, there is a realtek icon now. I've searched other forums where they've suggested installing IDT audio driver which will bring back Beats but there is no such driver on my laptop driver page. I've tried the windows 7 drivers but got no positive result. Also I've tried installing IDT drivers from different laptop models from different windows version but it says, "Hardware detected is not supported by this IDT Audio Driver" & stops installation process.
I've also tried installing it in safe mode, but got same result. Note that my audio is working as normal with realtek, but the soun is lower than before. I just need the beats audio back.
Please help me out with this issue. I've searched your forum but didn't get any solution (just different IDT drivers which resulted the same thing).
Waiting for a reply.
Thanks.
This question was solved.
View Solution.

Hi,
The beats audio interface is provided by the audio software installer - this can be IDT or Realtek depending on the hardware.
Try the following.
Download the Realtek Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66107.exe
When done, hold down the Windows key and press R. Into the Run window type devmgmt.msc and hit enter.
Expand Sound, Video and Game Controllers. Right click the Realtek device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, download and reinstall the Chipset driver on the following link.
http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66094.exe
When the reinstallation has completed, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Let Windows fully load - it may automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the Realtek Audio installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again and let Windows fully load for a couple of minutes before trying to launch the Beats interface from Windows control panel.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Pdf reader plug-in missing in safari after installing lion

After installing Lion, my pdf plug-in seems to be missing for Safari. I am not being able to view the embeded pdf documents anymore. I have installed java for Lion, downloaded adobe reader plug-in, restarted my macbook-pro - nothing helps. What am I misisng? or is this a bug waiting to be fixed?
Works with Chrome though...

Check the messages under "More Like This" in the column on the right.

Missing Listener.ora after installing 8i on Red Hat Linux 6.1

Hi
After Installing Oracle Enterprize Edition on Red Hat Linux 6.1(Using two patches viz jre1.1.6 and linux_815patches)& created default database with sid ORCL.But listener.ora is missing in $ORACLE_HOME/network/admin.
So showing error when ever trying to start lsnrctl service.
What is the reason ? How can you we get default listner.
Is there any other way to connect client and server without listener.ora.
please reply immediately.
null

Create and configure it. See Section 5:
http://homepages.tig.com.au/~jmsalvo/linux/oracle8i.html

Ati Radeon HD 6370M code 43 in device manager after installing driver - can't get GPU to work

Hello
I have bought a second hand HP laptop recently and I am having hard time installing GPU drivers and getting it to work at all.. so here is my story:
I was told that the product I bought is a HP Pavillion DV7-4142eo. I have removed the battery and checked the labels under it - and indeed the manufacturers labeled it as a DV7 4142eo laptop.
HOWEVER - and now comes the fun part - the product number in the bios (XZ288UAR#ABA) belongs to the HP Pavilion dv7-4263cl. This is also true according to hp automatic product detection app.
I used the system information tool on windows 7 and pcidatabase.com to determine the models of the graphic cards in my laptop. It turns out it has an ATI Mobility Radeon HD 4250 and an Ati Radeon HD 6370M gpu.
First I tried to install the ATI Mobility Radeon HD 5650 Graphics driver, because this gpu belongs to the DV7-4142eo laptop. It didnt work, in the windows 7 device manager I got two times "standard vga graphic adapter" showing.
Next I tried tried autodetection and used amddriverdownloader. This tool recomended installing the following driver: 13-9-legacy-vista_win7_64_dd_ccc_whql.exe . After installing this driver the integrated graphic card ( ATI Mobility Radeon HD 4250) works perfectly but I the other one - the more powerful one, the Ati Radeon HD 6370M - doesn't work. In the device manager it is labeled as "standard vga graphic adapter". Installing its own driver doesn't work as it results in the problem stated in the Subject.
What do you suggest me to do? Do you think code 43 means that my laptop's GPU is broken? Please help.
Thank you

Hi:
I would go with the product code...and say it is a HP Pavilion dv7-4263cl Entertainment Notebook PC.
Accordingly, this would be the only AMD graphics driver you can use.
Uninstall all previous graphics drivers and reboot before attempting to install this one.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-89582-1&cc=us&dlc=en&lc=en&...

T540p BSOD after installing driver with ThinkVantage System Update

Hello,
today I got my brand new T540p. Its was delivered without OS (Lenovo Campus). I downloaded the ethernet drivers and the TV System Update on a usb flash drive with my old thinkpad. After installing Windows 8 Pro, i installed the ethernet drivers to connect to the internet. Then i started the TV System Update and let it install all critical and optional drivers.
After the all drivers have been installed the machine wants to reboot, but now i am in a reboot loop. Everytime it hangs in the screen "Windows Update 100%" and then I see the blue screen of death (Driver Power state failure) and the machine reboots again.
Does anyone else have this problem or is there a fix from lenovo?
Thanks,
Mat

After fresh install of win 8 I only updated drivers from windows update. Works fine so far. Upgraded to win 8.1 still no problem. Use nvidia, wifi, intel graphics driver from windows update. Windows could not install chipset drivers. So I downloaded the intel chipset drivers from lonovo. Install crashes with bsod and ending up in reboot loop. I assume it's a problem with the intel drivers from lenovo. At moment I install win 8 again and I will try to install the drivers from intel website.

Programs missing from menu after install?

Hey guys just got my install up and running, using Cinnamon desktop.
So, after installing a program via pacman it wont populate in my menu until I reboot. For instance chrome, I can launch it from the terminal but can find it when I search for it under applications, once I reboot its right where it should be.
any ideas, I like to not reboot every time I install a package.

I don't use Cinammon so I can't test it, but maybe you can just log out and log back in? I know it isn't a solution but it should be quicker than rebooting.

Missing tiger features after install

hello
for christmas i bought my wife a power mac g5 2.3 ghz & bought my gilrs an imac g5. both came with tigger.
i inherited my wifes old g4 mdd and went out and bought a family pack tigger 10.4.3. i wiped the g4 and installed tigger. unfortunately i found out i could not my account onto the mdd from my old g4 400 mhz with agp due to firmware issues. so, i did everything mannually.
anyway, im noiticing there are features on my wifes and girls copy of tigger that seem to be missing on mine. such as:
-when i move files in and out of folders, no neato sound. i checked sound in prefs, they have 3 options, mine has 2.
-no ripply effect with widgets
- i have to wait a real long time before i can highlighti text under a folder or icon, if i do it to quick (or slow!), the folder or file will open, irritating.
are there some major subtle diffs between factory installed tigger and retail version? or did i miss sometyhing on the install?
thanks
wayne

Hello Nut Case:
This knowledge base article explains why you do not get the ripple effect:
http://docs.info.apple.com/article.html?artnum=301347
The effect is hardware based - no setting required.
The other differences are, I suspect, a function of the platform rather than your install.
Barry

Raid mode very slow/ crashing after installing driver (Z68A-GD65 (G3))

I recently purchased a Z68A-GD65 (G3) motherboard, i5-2500K, 8 gb ram, and a Crucial 64GB 4m SSD drive. The intention was to use the SSD drive for Intel Smart Response Tech.
Instructions tell me to place the SATA ports in RAID mode, which I did. During installation of Windows 7 (64-bit), I provided the "F6" raid drivers which installed. After that point, my hard drive (a WD 250GB SATAII drive) begins to perform incredibly slow. Once Windows 7 installs, which takes way longer than it should, Windows has problems booting and won't work properly.
I tried installing Windows 7 without the "F6" raid drive on install and that worked fine. Everything seemed to be working great. I then installed the Intel Rapid Storage Tech software and rebooted. Now my system is acting up again. It takes far longer to boot, it shuts down as soon as it boots, and it has even blue screened on boot. It is very unstable.
My SSD is unplugged during all of this. I'm just trying to get Windows 7 to run properly on my one mechanical drive in raid mode.
Do I have a bad motherboard? Anyone have any ideas?
Edit: I'm not using the Marvell ports. The hard drive works fine in IDE/ACHI modes... I've been using it for years.
Thanks

So it turned out that the issue was the hard drive itself. It had been running flawlessly for years as my system drive. However, the Intel iastor driver exposed a hidden issue with the drive.
I decided to check the Windows system event log for any clues. In there I saw errors with event id 9 on iastor. They were lined up with the times of the hangs and blue screens. Solutions I found online for this issue did not help. Luckily I have two hard drives in my system, although they are both the same model. I moved my data around and clean installed Windows on the other drive instead. The hangs and blue screens are no longer occurring.

X301 problems after installing driver updates - won't come out of sleep mode

We have a new X301 with Vista 32 installed. Things were working fine until I ran system update the other day. I've set the power options so not shutdown hibernate, however, after a period of time the system seems to go to sleep or to a screen saver and will not come out of whatever state it is in. The only solution is to power off/on the system.
I have an X500 where there were display driver problems if there was an external monitor (dual monitor) attached. The only thing I can think of is that either there is some similar issue with the X301 since we have an external monitor attached or there is something that was messed up with the drivers that were installed. I do have (for now) restore points before these drivers were installed but I'm not ready to take that drastic step yet (or a full system restore and start over).
Anyone experience this type of issue or have any suggestions?
Thanks
Neil

Sadly, I had the issue resurface today. It went into standby/sleep mode while I was in a meeting (on battery power), and later I tried to wake it, and all I got was a black screen with a mouse cursor.
The keyboard brightness and volume keys on the keyboard were responsive (I could hear the audio level clicks as I changed it), but the visual overlay didn't show (where it shows the white speaker graphic with the bar of rectangles representing volume level). Also, the screen brightness keys did nothing.
I finally used Ctrl + Cmd + Power to force a restart. Luckily, my user account didn't get completely hosed like it did a couple weeks ago.
So, it looks like Migration Assistant isn't the culprit here. This is the system I just finished rebuilding. So it's either a bug in OS X/Mavericks, or it's due to an application I have running, or a configuration change I've made.
It seems to only happen when I'm on battery power, for what that's worth. I don't recall it ever happening when I'm plugged in. I have Power Nap disabled while on battery power, btw.
I'm going to enable SSH access so I can try to SSH in the next time this happens. Perhaps that will provide useful diagnostic info.
Anyone have any tips or suggestions?

Missing 50GB's after installing Leopard on new HD-best way to re-install

I installed Leopard on a G5 tower with 2 new 750 GB's seagate drives. Disk Utility shows a total capacity of 698.6 GB's out of 750 GB's so I am missing 50 GB's. Also first aide hangs up on Verify/repair disk permissions. It looks like I am dealing with an "erase" issue since their must be other files on the new drives that are causing problems, My new thoughts on this are:
(1)For MacHD 2, in DU click on the "hard Drive(698.6 GB ST3750640AS)/security option-zero out data/erase
(2) For MacHD 1 (Leopard) insert the installation disk/go to option-erase and install/ok
Will this work or is there a better way to go about it.
Thanks for looking at my Post
Ron

Ron Apra wrote:
I installed Leopard on a G5 tower with 2 new 750 GB's seagate drives. Disk Utility shows a total capacity of 698.6 GB's out of 750 GB's so I am missing 50 GB's. Also first aide hangs up on Verify/repair disk permissions. It looks like I am dealing with an "erase" issue since their must be other files on the new drives that are causing problems, My new thoughts on this are:
(1)For MacHD 2, in DU click on the "hard Drive(698.6 GB ST3750640AS)/security option-zero out data/erase
(2) For MacHD 1 (Leopard) insert the installation disk/go to option-erase and install/ok
Will this work or is there a better way to go about it.
Thanks for looking at my Post
Ron
Most drives are listed as unformatted size and take advantage of the "1000" kilo which is really 1024.
Also a system with folders, &c. takes up space with no actual files.
Your "loss" of less than 10% is normal and expected.
For example, the "250GB" HD on this MBP as reported by DU says:
Total Capacity : 232.9 GB (250,059,350,016 Bytes)
But I have not lost 17GB.
Since your drive is 3 times the size of mine, I would expect to see a "loss" of 51 GB (3x17) which is exactly what you are reporting.

Missing Safari icon after install of iOS 8

After download/install of iOS 8,my Safari app icon went missing. Can't retrieve it from App Store as it comes w/ iPhone (5s). How do I get it back? Thanks!

Hello jrdtnpsp,
Thanks for using Apple Support Communities.
Please check your restrictions as directed in the support article below to ensure that either your restrictions are disabled, or Safari is not disabled.
iOS: Understanding Restrictions (parental controls)
Take care,
Alex H.

Cannot add Epson SP 1400 to printer list after installing driver

I have a new Epson Stylus Photo 1400 and I'm having trouble adding it to my G4's printer list. I'm running OS 10.3.9. I installed the driver from the Epson disc but when I get to the Add Printer stage, the printer isn't on the list. I've uninstalled and reinstalled the printer software several times to no avail. I called Epson Support and they walked me through downloading and installing the newest driver, checking that the USB cable was good and connected, printer turned on, etc. Each time after the installation, the 1400 driver isn't in the Library > Preferences > Printers folder. When I open the Printer Setup Utility and click Add, nothing happens. It doesn't even open another window. Epson Support then advised me to call Apple because my OS might be corrupt. Before I try reinstalling the OS, I thought I'd see if someone had a better idea. I see similar problems from other users with Epson printers. Can anyone help?
Thank you!

I am having the same problem but with a newly-purchased Epson R1800. I followed the Epson instructions but when I got to the "Printer Setup Utility" it would not open; it was as if it wasn't even there. I know its not included with Leopard but should definitely be included with Panther since Epson says the R1800 will work with Macs using OSX(10.3x)! I called AppleCare (my expense), gpt a work order number and worked with them for half a day today with no luck. First we tried "disc first aid" but when that didn't work I ended up doing a full reinstall and archive with their assistance. Still no luck! The person assisting me tried but was unable to resolve the issue and asked me to hold on for another expert; I waited on the phone to speak with that person for over two hours and eventually had to hang up after figuring I was placed "on forget" instead of "on hold". When I redialed AppleCare, the recording told me they were closed for the day. Any help would be appreciated - from anyone!

Missing IBM Infoprint after installing driver

Similar Messages

Maybe you are looking for