Missing icons i Launchpad - apps don't work

Hello,
Yesterday i discovered that i am missing alot of my icons in Launchpad:
When i open any of the apps that doesn't have an icon, it launches, but i can't do anything. It won't open any documents in PDF-viewer and iBooks instantly stops working. It happened after i upgraded to Mavericks, if it has any relevans. I've looked at several forums, and it seems that I am not the only one with this problem. However, most people fix this by deleting a certain file and using a command in Terminal, but the app isn't working becauase of this problem.. I can open the Terminal, but there's no option for typing in commands.
I hope someone can help me with this problem.
Thank you in advance.

HI appleuser1993,
I don't know if this will help you but I experienced something similar to your issue. I had also many icons missed in the LaunchePad, it was after a clen with Clean my Mac wich did its job perhaps in a excess of zeal.
I had to go to App in the Finder and copy all apps to the LaunchePad and then, my Apps icons are back again.

Similar Messages

  • After software update (Sept. '09) apps don't work and some missing

    Plugged my phone in and itunes said there was an update I needed to install. Did that then it said there was a problem with the phone and it needed to be formatted before itunes could read it, did that too. Then while it was syncing up again after formatting it kept telling me there was a problem and items could not be found. All downloaded apps, some are missing completely from the phone, are no longer working. HELP!

    expresso3 wrote:
    yes i am fully aware of that!!!
    This "i do not see an update when i connect to itunes!!!!" suggested otherwise.
    the post says "after software update (sept. '09) apps don't work and some missing"
    there has been no update in sept 09!!!!
    Perhaps the OP doesn't connect the iPhone to the computer very often.
    Phil

  • My World blue blank screen,apps don't work

    I wrongly updated OS6 in my Bold 9700, phone didn't work well when I realised I downgraded software to latest version OS5. Since then, when I try to access info in Myworld about an App the screen goes blank, I can pres the menu key and it gives the option to download but then I see nothing. I have no problems with some apps,but facebook just doesn't work at all. I download it but it doesn't give me the option to 'run'. In the application list it appears,so it is in the phone but there is no icon. Other apps (such as bank apps) don't work either,they show 'error 'net.rim.device.api.ui.container.GridFieldManager not found'.
    I have done a security wipe, deleted and reinstalled all apps including Blackberry World. I have reinstalled software about 4 times,battery pulls...you name it.
    I have data allowance with O2, but the phone is an unlocked AT&T Bold 9700 brought from the States.
    Any tips on what else can I do?The phone used to reset itself when I accessed My World,it seems it stopped doing that now, but still can't see anything when I want to see an App info. Thanks!! 
    Solved!
    Go to Solution.

    Hi and Welcome to the Community!
    A few things to try, in order of "less destructive" to more-so:
    I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    Please wait for one "registration" message to arrive to your Messages app
    2) Delete and Resend Service Books
    KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
    If you have no CMIME entry, then skip the deletion
    KB02830 Send the service books for the BlackBerry Internet Service
    Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
    3) Batt Pull Reboot
    With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    I suggest that you clear the AppWorld application cache:
    1. Open App World
    2. Go to My World
    3. Follow one (and only one!) of these steps:
    3a. For keyboard-based BB's -- Hold down the ALT key and then press, in sequence R, then S, then T
    3b. For Touch Screen Only BBs -- Hold the num-lock (!?123) button so it locks and then press, in sequence 3, then 4, then (
    3c. For newer (e,g., OS6 and 7) BB's, see this KB:
    KB24714 How to clear the BlackBerry App World cache
    4. AppWorld should close.
    5. If your BB locks after issuing the cache clear, perform a battery pull reboot
    6. Return to AppWorld/MyWorld (it may be sluggish while it re-synchronizes).
    If step (4) does not happen as listed, then the clear cache did not work.
    128268 wrote:
     'error 'net.rim.device.api.ui.container.GridFieldManager not found'.
    Given that, it's possible that the OS loading did not go well (for one reason or another). Consequently, you might want to do it again.
    At the top of each device forum, there should be some "sticky" threads that discuss the OS levels available for many models. If they include your model, then please use those as reference as you proceed. Otherwise, you will have to dig through the official download portal for OS packages for your model:
    http://us.blackberry.com/support/downloads/download_sites.jsp
    From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
    http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
    Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
    C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
    C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
    You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
    You may also want to try this procedure to perhaps narrow down the precise causal item:
    Load your OS "bare bones"...if anything is optional, do not install it.
    If the behavior presents immediately, then try a different OS with step 1
    If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
    Add one thing -- no matter how tempting, just one.
    If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
    Repeat steps 4 and 5 until all things are loaded or the behavior presents
    When the behavior presents, you know the culprit...the last thing you loaded.
    If the behavior does not re-present, then you know that either step 1 or 2 cured it.
    If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
    If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
    KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • All Mac apps don't work after cloning on new hd.

    All Mac apps don't work after cloning on new hd.
    I used CCC to clone 10.6.8 then onto new drive. Everything works BUT all Mac apps.
    Error: You can't open the app(s) because it is not supported on this type of Mac. (On MacBook 2011)
    Thanks for your help.

    All good. Just drag and dropped each application and they worked until I did a restart. Then repaired permissions and everything works.

  • My apps don't work after synching music files from my PC

    My apps don't work after synching music files from my PC through Itunes....though all the apps are shown in the Apps window in Itunes (The Apps match the iTunes account on the iPhone).....
    Disconnecting after the sync and After downloading any app from Appstore through Wi-Fi all my apps start working.....
    Please Help.....

    What happend is your phone forgot it was authorized to work with items associated with your apple id. If it happens again, download any free app to prompt the sign in, once you install the free app the others should work.

  • Apps don't work after being installed

    I loaded several apps Saturday and on Sunday apps don't work.  Afraid to "reset" phone.  any ideas?

    See here for...
    Troubleshooting applications purchased from the App Store
    also, you will not lose any data or setting with a Reset or a Restart
    Restart / Reset
    http://support.apple.com/kb/ht1430

  • After installing "Java for OS X 2013-004" update, Java apps don't work anymore as expected

    After installing "Java for OS X 2013-004" update, Java apps don't work anymore as expected.
    Windows of Swing apps don't display all GUI elements.
    After replacing System/Library/Java from a Time MAchine Backup, everything works normal again.
    Is this update corrupted?

    "avoid using Java in a web browser at all,..."
    Good advice.
    "...old Java apps/applets that aren't written to modern specs ..."
    The stand-alone Java Swing applications, that don't display their GUI elements after installing this update, have been written according to modern standards. With Oracle Java7, and with Java6 from Apple prior to this update, they run absolutely flawlessly.
    This is absolutely Apple's fault.

  • What's the go with this latest update. Half my apps don't work and the iPad runs slower? How do I go back to the old operating system?

    What's the go with this latest update. Half my apps don't work and the iPad runs slower? How do I go back to the old operating system?

    Make sure your apps are updated.  You might try Settings > iTunes & App Store > Automatic Downloads - Updates = "On".
    You cannot go back to an old operating system.

  • After update iOS 8 some of the apps don't work please help me

    After update iOS 8 some of the apps don't work please help me As fast as you can

    There can be some of that. Unfortunately, it's up to the app developers to make their app work with the iOS.
    So checking for updates can help. You can also look at the reviews for the app, see if others have the same issue. If 8 has broken the app, all you can do is wait.
    In some cases, a reset can help. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again. (this can work if the app is fine with iOS8 but is just glitching...it's a harmless reboot of the system)
    Another thing to try is to force quit the app(s) and force them to reboot. Double tap the home button. Flick the preview for the app up and off the screen to close it. Then single tap the home button to exit the mode. Try your app again. If it's just a glitch then this sometimes clears it up.
    I know once I updated my devices I then had several updates pushed out - updates that required iOS8 so weren't available before the update.

  • I updated to ois 4.3 and now my apps don't work

    I updated my 3rd generation ipod to the ios 4.2.1 and now half my apps don't work. How do I get back to where they do and is there some way to fix this bug?

    - First try resetting your iPod.  Nothing will be lost:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Some users have said installing a new app resolves the problem.  Thus, I would try purchasing a free app.

  • I just bought a new iPhone 5 and both the itunes and the App Store apps don't work, can anyone give me some answers?

    I just bought a new iPhone 5 and both the itunes and the App Store apps don't work, can anyone give me some answers?

    Follow the directions here:
    http://support.apple.com/kb/HT2109

  • I have an Iphone 3g. I had it unlocked by Apple now my apps don't work! Have tried syncing phone, reseting phone, deleting and reinstalling apps but still not working. Help!?

    Hi, I have an iPhone 3G. I had it unlocked by Apple, now my Apps don't work. They open then immediatly close again. I have tried: syncing, reseting, reloading the Apps. Can anyone help!?

    settings->store and make sure your appleID is set correctly if it's not then what you exp would happen

  • After upgrade to os 4 some apps don't work including Apple Store

    Upgrade went ok, but took long time. Some apps don't work correctly or crash. e.g. Apple Store app just recycles back to main screen. Starbucks app works for a few seconds then crashes.

    I had same problems.
    I decided to "downgrade" back to OS3. You can too!
    Go to this thread and read about it. http://discussions.apple.com/thread.jspa?threadID=2473976&tstart=0

  • I just upgraded to os 5 and now my non apple apps don't work. They will not launch. Anyone seen this before?

    I just loaded os 5 on my iPad 2 and now all non apple apps don't work. Anyone have any idea way?

    Have you tried basics from the manual?
    Restart.
    Reset.
    Restore.

  • Brand new iPad mini 2 apps don't work?

    i purchased an iPad mini 2, all of the apps the iPad came with work fine. However the downloaded apps don't work at all they download and then I try to start one and it just closes right away. I have turned it on and off, reset it completely can anyone help?

    Take it in for service.
    Barry

Maybe you are looking for

  • Main Reports' Group Tree doesn't retain last record selected

    In Crystal 2008 Viewer, when you click one of the last tree nodes on a long Group Tree, the program jumps to that part of the report for that group.  But when you return to the Main report tab the Group Tree pane returns to the top. According to my u

  • Duplicates, triplicates, etc, etc.

    We had a virus that could only be resolved in wiping out everything. After it was cleaned, the technician that fixed it, dumped all of our files into one folder. After installing itunes again, my husband synched up the ipod to itunes, but itunes dump

  • Exchange Server 2010 usage monitoring

    Dears    How we can monitor Exchange server 2010 usage like owa usage, mail sending, contact Adding and editing ...etc. is exchange has tools to do that or i have to use system center if yes what version of system center is Enterprise or Standard?

  • How to prove whether landscape in sink or not

    Hi Folks, What are the ways to evident that a object is identical across the systems? say we need to prove a object, whether its exactly identical in Development vs Quality. since we have more number of objects, kindly suggest an easier way to achiev

  • Launch workflow through Custom.pll

    All, We have a requirement to invoke Workflow process for every service request create / update and I am calling the wf like below in custom.pll WHEN-VALIDATE-RECORD XXPPS_CRM_WF_PROCESS.XXPPS_WF_LAUNCH (                                     08291302