Missing IDOCS from SAP to BODI
I have an issue of missing idocs from sap going to BODI.
Idocs are received by BODI trough adapter, but there are idocs that are missing but are successfully sent by SAP. When trying to resend the idocs it was successfully received by BODI.
We thought that it is an intermittent connection issue, so we try to send idoc from SAP while the adapter was down. The idoc was successfully sent from SAP. Then we try to start again the adapter and it was loaded after sometime.
Iu2019m now out of idea on why does the idocs went missing. Can someone help me?
Thanks in advance.
Hi Parida,
IDoc Status 03...Green Status... wills not guarantee you that IDoc reached EDI subsystem...
Run the Program RBDMOIND in SE38...
Changed on :<Date>
IDocs/Commit Work :100
Display IDoc not sent- Check the Check Box.
Now you will get list of un posted IDocs
Ramesh
Similar Messages
-
Missing idocs from SAP to webmethod
Hi Experts,
We have many Interfaces from SAP to AS/400 System Via Webmethods .
There are many Idocs are missing in webmethods Even if the Outbound Idocs is showing As Green with Status 03 in SAP.
So Could You Please give some Suggestion where could be the Problem in SAP or Webmethod System.
Please suggest.
Is there any Transaction in SAP,We can assure that Idoc has been Despatched to Webmethods System?
Thanks in Advance.
Regards,
Parida
Edited by: hara parida on Feb 5, 2009 12:58 AMHi Parida,
IDoc Status 03...Green Status... wills not guarantee you that IDoc reached EDI subsystem...
Run the Program RBDMOIND in SE38...
Changed on :<Date>
IDocs/Commit Work :100
Display IDoc not sent- Check the Check Box.
Now you will get list of un posted IDocs
Ramesh -
Problem in Outbound IDOC from SAP R/3
Hi,
I am working on to send an IDOC from SAP R/3 to XI.
I configured all necessary things as follows:
1. Created for XI in sender system -- RFC dest, PORT and a partner profile with an outbound parameters and reciever port as XI port.
2. created for sender system in XI -- RFC dest, PORT(as SAP<SID>) in IDX1 and assigned an idoc type(coming from sender system) to the port.
Now I am trying to push the IDOC from sender system using Test IDOC transaction and gets success message as data is passed to port.
My problem is I am not able to see any message in SM58 of XI server.
Could anyone help me out?
Thanks In Advance.
Yaseen.Yasseen,
you hardly see the idocs in Xi in sm58. Try sxmb_moni.
If you see anything there try sm58 on the sending R/3. There you see if you have connection problems (eg authorization in XI or missing receiver determinitions).
Hope it hellps,
helge -
"An IdocException occurred" while posting Idocs from SAP ECC to SAP PI AEX
Hi all,
While sending Idocs from SAP ECC to SAP PI 7.4 AEX, we are experiencing this issue at SAP ECC-SM58
Only a particular Idoc type is having this issue.
Below are the checks done before posting this query:
1. Pushed other Idocs from the SAP ECC to PI and all were getting exchanged successfully.
2. Reloaded the meta data in PI for the particular Idoc type in issue.
3. Checked the RFC destinations in SAP ECC, RFC connection test is also working fine.
4. Unicode option enabled in the SAP ECC RFC destination pointing to PI-AEX
5. Restarted the inboundRA service in PI AEX.
Is there anything still missing. What could be root cause of this issue.
If anyone has encountered it before, pleases share the resolution.
Thank you
YounusHi Amit,
Thanks for the reply. Log viewer doesn't provide much help on the error.
The error desc says
"JRA]serverExceptionOccurred. Server XI_IDOC_DEFAULT_SID, Managed_Application_Thread_58, connectionId=5-ip address|sapgw20|XI_IDOC_DEFAULT_SID, Exception: com.sap.conn.jco.JCoException: (104) JCO_ERROR_SYSTEM_FAILURE: An IDocException occurred"
regards,
Younus -
How to Trigger an IDOC from SAP R/3 to two systems at a time
Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELVRY03 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once. We need to write a logic to route the same to two different systems
Can any one tell me how can we do that ?
Regards
Ram.Hello Ram,
Do you have connectivity between your production & XIQ?
What does "connectivity" mean?
1. RFC destination is maintained.
2. Port defined for the RFC destination.
If no, create these. (Search in SDN for details).
If yes, proceed:
1. Define the logical system for XIQ.(BD54)
2. Define the same as your partner profile. (WE20). Add the message type SYNCH with the port for XIQ.(This is imp)
3. Create a distribution model view with sender as "your production" & receiver as XIQ.
3.1. Add the messages which you want to distribute.
3.2 Generate Partner profiles.
No coding is reqd. for this.
BR,
Suhas -
Error while pushing idocs from SAP to XI
Dear All,
For doing ALE configurations for pushing IDOC's from SAP to XI, I am following the following blog posted on SDN:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
I am able to create the model view distribution successfully but when I am clicking on EDIT --> MODEL VIEW --> DISTRIBUTE (which is one of the steps mentioned in the blog), I am getting an error tht
<b>Target system XIDEV Communication error occurred
User is locked. Please notify the person responsible</b>
please tell me what is the error ie which user is locked and how should i proceed now.
Waiting for your reply.
Warm regards,
N.Jainhi krishnamoorthy,
i hve created one RFC in my R/3 system which is pointing to Xi-DEV. So, in the RFC I have used my XI user id & password for loging and the RFC is wrking fine when I am testing tht. I have used my id "XISUPER" in that RFC and it is not locked in XI-DEV. I have not used user id "XI_APPLUSER" anywhere.
Please suggest.
Warm Regards,
N.Jain -
Help needed in transferring IDoc from SAP CRM to XI
Hi All,
We are facing an issue in sending an IDoc from SAP CRM to XI system. The IDoc is triggered and the status is showing as 03 in SAP CRM system(WE05 is used) but it is not getting replicated in XI System. This is verified by logging into XI System and cross checked the records retrieved by executing the transaction IDX5. No entry is found for this IDoc.
In SM58 transaction, it is giving the status text as EDISDEF:Port SAPRIO segment defn E201CRMXIF_BILLI.
Any pointers on this issues will be very helpful. We are able to send information from XI to CRM.
The project is an upgrade one and the IDocs are developed earlier and were working fine one week back and no changes were made recently.
Thanks,
UdayaHi Kapil,
Thanks a lot for your help. We need to delete and recreate Metadata. This is a typical problem that is encountered during upgrade projects.
Thanks,
Udaya -
Unable to send an idoc from SAP R/3 to XI
Hi,
We are trying to send Z_CREMAS_SUSMM.CREMAS03 idoc from R/3 system to XI using IDOC adapter.
We have done the following steps.
On SAP R/3 system:
1.created a RFc Destination which points to the XI system using transaction SM59
2.created a port in which we have selected this RFC Destination using tansaction WE21
3.logical system for R/3 with transacion BD54
4.In WE20 transaction,we have configured the PartnerProfile by adding the IDOC message type to the outbound Parameters of XI Logical system.
On XI Sytem:
1.Created RFC destination
2.Created a Port
3.Loaded metadata
While trying to Post IDOc from SAP R/3,it is throwing an error"External segment name E2LFA1M001 cannot be interpreted"
and "Basic type CREMAS03 does not exist" on XI side.
Can anyone please provide a solution to this?HI Jagruthi,
Have you loaded the metadata into the XI system by using IDX2?
If it is done then try to delete once and do once again.
And also delete the IDoc from IR and reimport the IDoc and activate it once again.
Regards
Goli Sridhar -
How to Trigger an IDOC from SAP R/3 to two XI systems
Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELCERY01 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once.
Regards
Ram.Hi Ravi,
Thank you very much for your answer.
As I am not completely aware of R/3 side,I am getting little problem in understanding your answer.
Could you please explain the same in some what beter way.. Thank you .. -
Message SR 053 when i send idoc from SAp R/3 4.6C to PI 7
Hi,
I try to send idoc from SAP r/3 4.6C to PI 7. I had made ALE configuration in my sender system ( SAP 4.6C) but idocs are not sent to PI. In SM58 i have message "Name or password is incorrect (repeat logon)". Yet i'm sure that user and password are correct because if i test RFC destination using SM59 , test is OK.
Is somebody can help me ?Hi,
In R/3 :
my RFC destination is type 3 and point to XI. The port in the partner profile point to this RFC destination. ( all seems good !).
In Xi : i created a port and i load manually idoc in idx2 to be sure that RFC destination was OK. Nothing in IDX5.
When i send idoc MATMAS using BD10 from R3 to Xi i have something very strange: first the message B1 038 "1 master IDocs set up for message type MATMAS" and just after
the XI logon screen appears !! Then message "1 communication IDoc(s) generated for message type MATMAS" and this idoc stay in SM58 with message "Name or password is incorrect (repeat logon)".
Somebody can give me requires caracteristics for XI user used in R/3 RFC destination ? -
Is it possible to read Idocs from SAP R/3 System?
Is it possible to read Idocs from SAP R/3 System? Instead of the aRFC
Unless Hydra emulates ECC sending IDOCS, then you just might want to use the WSMessageListener (http://help.sap.com/saphelp_xmii120/helpdata/en/45/6a86ac88130dece10000000a11466f/frameset.htm) and configure your message processing rules accordingly.
-
Problem when pushing IDOC from SAP to XI
Hi,
I am trying to push an IDOC from SAP R/3 system to XI. When I processed the IDOC using test tool(WE19), it's showing message that IDOC sent succesfully to R/3 or External system. But in SM58 Transaction it gave error message that in Trabsaction IDX1: some RFC connection error. Then I opened the Transaction IDX1 on XI server, in that IDOC Adapter configuration I gave RFC destination, Logical system name of R/3 and saved it. Now When I tried again to push IDOC from R/3 to it's not giving any error message(in SM58), but I am not able to see any thing in SXMB_MONI. Can anybody guess what's happening? And also I am using fresh newly installed XI server. DO I need to configure something else? All RFC connections are well defined and working fine.Hi,
It is not required to create Sender Agreement for the Idoc to XI scenario. Because it is implicitly exists.
Can u check Receiver Determination created in the XI once again. And also check for RFC destinations created in the R/3.
Hope it helps ..
-Moorthy -
Send IDOC from SAP system to IX but can't see any message in SXI_MONITOR
Hi all,
I have built up an XI system and configured an IDOC to IDOC scenario between two SAP Systems. After completed all configuration necessary:
1. Configuration on Source Side (SAP System that send IDOC) and on Target Side (SAP System that receive IDOC) is OK.
2. SLD is OK: Technical System and Business System are correct for these two SAP System.
3. Integration Repository: all designed Object is OK.
4. Integration Directory: all configuration is OK. "Test Configuration" Function is OK.
5. Runtime WorkBench: is OK. "Test Message" Function of "Integration Server" is OK.
In general, it is all OK.
But when i send an IDOC from SAP System Sour Side (Outbound IDOC from Source Side is OK), on the XI server i can't see any message in Tcode SXI_MONITOR. In this case, my XI server didn't receive any IDOC Message from this Source Side, and so that my XI server can't process and exchange any IDOC sent from Source Side.
Anyone can please help me to explain this problem: why my XI server can't receive any IDOC message from SAP System Source Side when all configuration is OK? Do anyone see the same case as this case?
Thanks a lot for all in advance,
Best regards,
Vinh voHi,
Possible checks
At R/3 side
1) Check in SMQ1 and SM58
At XI Side
1) Check in SMQ2 and IDX5
Check this
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
Regards
Seshagiri -
Limit send of IDoc from SAP-ERP to SAP-XI or a Non-SAP
Hi guys,
I send the following IDocs from SAP-ERP over SAP-XI to Non-SAP for an initialload: Artmas, Bommat, Infrec, Cond_a, Mmaddi, Cremas
Example: Artmas with TA: BD10.
Problem: SAP-ERP send all 25'000 IDoc to SAP-XI. The effect is that the qRFC and tRFC in SAP-XI is full, because the Non-SAP is not fast enough to takeover the Idocs. From then other systems can't send out or get in Idocs.
I tried to limit in WE20, but it didnt work. TA: RSEOUT00 ist not so useful, because of the quantity of the IDocs.
Is in SAP-ERP a possibility to limit the sending of IDocs to SAP-XI or Non-SAP?
Example: Automatic sending of 200 Idocs every 2 Minute.
Thanksmay be u can write a wrapper above BD10 this way
report zaRs message-id b1.
select-options: matsel for marav-matnr matchcode object mat1.
parameters: receiver like tbdlst-logsys no-display.
start-of-selection.
select * from mara into i_mara where matnr in matsel.
refresh : matsel.
v_no = 0.
loop at i_mara.
move i_mara-matnr to matsel-low
* fill up sign option etc.
append matsel
do.
move mara
if v_no = 200.
submit rbdsemat " Program behind BD10
with logsys eq receiver
with matsel in matsel
with mestypat eq 'ARTMAS'
and return.
wait 20 seconds
exit.
clear v_no.
endif.
enddo.
a® -
Post Idoc from SAP to Thirdparty using XI
Dear Friends,
My requirement is sending the Idoc from SAP to Thirdparty system,but Thirdparty system also receive the Idoc format only.
so IDoc to Idoc scenario but SAP to Thirdparty system it is possible or not.
please tell me how ?
Regards,
Shalini ShahYou can use SAP Business Connector(BC) to convert IDOC to IDOC-XML at the third party legacy system.
With Business Connector see the below links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://www.erpgenie.com/mysap/bus_connector.htm
WAS - Business Connector
business connector documentation
SAP Business Connector
Business connector
Will Business Connector 4.6 be affected by new Daylight savings changes
Business connector
More info on XI can be found at https://service.sap.com/xi
and webAS on http://help.sap.com/saphelp_nw04/helpdata/en/f3/e20f3adfd0a706e10000000a114084/frameset.htm
Check this also-
http://help.sap.com/saphelp_nw2004s/helpdata/en/6f/1bd5c2a85b11d6b28500508b5d5211/frameset.htm
Maybe you are looking for
-
How to Check whether incoming field is Alpha or Nuemeric in Mapping
Hi all, I have the logic like this If the incoming Location code value is totally Alpha means i have to concatenate Location code and the last three digits of Delivery No. else pass the location code as it is Regards
-
How to check if classpath of J2EE Engine refers to library(jar) ?
I have access to SDM Manager tools, how to check using this tools if library is in classpath. Because during deployment of EAR file containing websevice I receive exception about absent of library com.sap.mdm.tech.mdm4j.
-
When I select File. "Display duplicates" is not in the list what am I doing wrong here?
-
10.4.8 update - issues with mail and airport
Gah! Just as I was signing up so I could post on this board, my airport connection went bye-bye. Initially I tinkered with my router (linksys) settings. Recycled everything a bajillion times. Not sure what caused a partial resolution, but my connecti
-
Searching for untransfered shipment cost items
Hello everyone, Would you please help me with this question? Is there a report to find all the shipment cost items which: - were entered into the shipment cost, but have not yet been transfered? - have been transfered but the associated invoices (MIR