Missing Image Data in CS6 screen

I'm am sporatically encountering missing image data when opened in the CS6 image screen.  Missing data is displayed with transparency grid.  The problem occurs opening an existing PSD or when launching CS6 from ACR.  Reloading the image may or may not correct the problem.  Occurs in both new images processed in CS6 or images originally processed in CS5.  Problem occurs in both PSD images or Smart Objects.  Also, when enlarging the image view an image that displayed properly at 33% may loose image data in the display at other percentages.  It appears to be totally random. The image data is there, its just not displaying.  Lost data is in a rectangular section probably 25% of the image.
Windows 7 Professional 64 Bit, 8GB system memory, all current patches
NVidia Gforce 220, 1GB memory, driver current as of March 13, 2012
Images from Canon CR2 files.
Open GL is enabled
16 Bit images, sRGB or Adobe RGB, standard color workspace is Adobe and Canon camera is also set for Adobe RGB
Canon EOS 20D, Canon EOS 5D Mark II
HP with Intel I5 core processor.

I encounter the same problem. I always open my images (TIFF format) from LR4. My findings are as follows:
- the first image opened in PS6b has always this problem. Blocs of data are randomly missing. Zooming in or out restores the image temporary.
- by changing the background layer to a simple layer by double clicking, the problem disappears. More images loaded afterwards, appear normal. Only the image that opens PS6b has the problem.
Windows 7 64 bit, 8 GB RAM
Nvidia Gforce 240 GT 1 gig RAM with latest drivers
As my drivers are current and as everything else in my PS6b workflow works nice and smooth, I suspect "the Cat" and the trial screen to be the culprit.
jos

Similar Messages

  • Why do i keep getting "image is missing preview data" when trying to move files from bridge to PS ??

    I am not able to move multiple files to PS...regardless whether I am doing HDR or panorama.....get this "image is missing preview data" with the first file number of the series of files.
    #missingpreviewdata

    You don't "move" anything from Bridge "into" Photoshop.  You use Bridge to call on Photoshop to come and open the file(s), and Bridge simply hands the files over to Photoshop.
    The problem lies in how the files are being processed and saved.
    No one can help you until you provide complete and sensible details.
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Get Info image data missing

    I have used the Finder's Get Info command and accompanying window to determine the height and width of images since the beginning of time. Today that capability suddenly disappeared. When I select an image in the Finder and invoke Get Info, under "More Info" there are two hyphens instead of the dimensions in pixels (e.g. 300x250). I tried a dozen images in various formats like JPG and TIF but the dimension info doesn't appear anymore. I'm using System 10.5.8 on a 2008 Mac Pro. All the other expected info (creation dates, name, preview, etc.) in Get Info is there except for the image dimensions.
    I did not do any recent updates and haven't noticed anything else amiss. I played around with Finder prefs, restarted the system, repaired permissions, etc. Nothing brought back the image dimensions. I can use Photoshop or other programs to get the image dimensions but using Get Info via the keyboard command was a nice shortcut.

    I don't directly use Spotlight - I prefer HoudahSpot's interface to the Spotlight index. I have not changed the prefs in HoudahSpot or Spotlight itself, and the Spotlight Privacy list was empty when I just now checked it.
    But you are definitely on to something because after checking the Privacy List to see if any folders had been inadvertently added, I then tried Get Info again on an image file and VOILA! all the image data had been magically restored. Indeed, Get Info image data is now working for all images I have checked in the past few minutes.
    Thanks for the pointer. Apparently something triggered Spotlight to prevent the data from appearing and the mere act of checking the Spotlight settings restored the "missing" info.

  • How can I get the image data from Clipboard with LV

    Anybody knows How can get the image data after pressd "print screen button" with LV?
    I want to program a software which can save a image as a bmp or jpeg etc, and the image data is from pressed print screen button. 
    How to get it out from clipboard. I am trapping about. thanks in advance.
    Try to make everything Automatic

    You can have a look at Rolf Kalbermatter's post here (give him stars) or, if you're using scripting, you can use the Application class Get Clipboard Image method.
    Try to take over the world!

  • How do I load a picture from the clipboard (either Windows clipboard or Labview clipboard) into image data that can then be processed in Labview?

    I want to load a picture from the Windows clipboard (and if not possible, then from the Labview clipboard) into actual numerical image data so that it can be processed in lab view. When I'm at the main screen where I can add controls, I see a section of controls called "Vision" in the tool bar where all the different controls can can be added from. When I go to the control called "Image" and put that on my form, and then look at the flowchart/blockdiagram programing window to see what inputs and outputs it has, I only see one output, and no inputs. And when I right click on it, I see NO way to load an image into the Image control. PLEASE help me.
    Message Edited by Ben321 on 11-09-2008 04:32 PM

    Hi Ben,
    National Instruments has an image processing software called Vision and although I am not completely sure, I think the controls that you found in the control pallet are used in conjunction with the software. Depending on what kind of image processing you want to conduct in LabVIEW, you might want to consider purchasing that product.
    If cost is an issue, there are functions in LabVIEW which allows you to take in image files and process them. However, please keep in mind that the capabilities are limited.
    Images should be loaded onto LabVIEW not via the clipboard but through loading it from folders or directories. (There might be a way to and so if you find a way please let me know! I would like to know myself =D) If you open the function pallet by right clicking on the block diagram, in the programming folder you should find a directory called "Graphic and Sound". There, you'll find functions in which allows you to process images.
     In the "Graphic Type" directory there should be a function called Read JPEG file.vi. There are also others which allows you to read png and bmp files. Please note that there are functions which write as well. Set a file path on the block diagram and inside the "Grahic and Sound" there is a "Picture Function" directory and inside there, there should be a function called "Draw Flattened Pixmap.vi" That changes the image into a format where you can process on LabVIEW. Inside the "Picture Function" directory there are several functions which allows you to process the specified image. Play around with it and see how it goes. And don't forget to Write the file in the end to save any changes.
    I hope this helps
    National Instruments Japan
    Applications Engineer Taiki Hoshi

  • Why does the color change when I open a warm image in Photoshop CS6?

    Whenever I open a warm color image in Photoshop CS6, the color of the image automatically changes? Please see the attached screenshots below.
    What is the solution to this problem? Please Help.
    I use Windows 7 Ultimate. Photoshop CS6.
    Graphics Card: Intel HD Graphics 2000

    There is no "problem" to "fix". A raw file is just the data captured by the sensor, not yet an image. To produce a useful image it needs to be processed in a raw converter, either automatically in-camera or with a standalone converter (ACR).
    The camera LCD shows you an in-camera processed jpeg, according to the camera manufacturer's idea of how the raw data should be interpreted. There is nothing inherently "correct" about this, and a lot of the original data have been thrown away in the process.
    ACR doesn't make any assumptions about how the final image should look. It shows you a neutral starting point, with default settings to preserve as much of the original data as possible. The rest is up to you. You're not supposed to just accept the defaults. The sliders are there for a reason.
    You can change the ACR defaults at any time if you come up with settings that are more to your taste.

  • Passing data to multiple screens through SAP webgui;

    Hello, I'm working on building an application that requires me to pass data to multiple screens of a SAP transaction (IW31) through SAP webgui.  The requirement is to enter the required information in the initial screen, "Header data" screen and in the "Object Data" screen. I'm using the below URL to launch the webgui:
    http://myserver:8001/sap/bc/gui/sap/its/webgui/!?sap-client=800&sap-user=xxx&sap-password=yyy&sap-language=EN&transaction=iw31%20CAUFVD-EQUNR=20006001&AUFPAR-PM_AUFART=PM01&CAUFVD-GSBER=0001&OKCODE=/00&CAUFVD-ILART=103&~OKCODE==IOLU
    This is failing with the following error message:
    *Flow control: Entry SAPLCOIH, IOLU, A0, *   , *   , * is missing in T185*
    I also noticed that if I stop at the point where I enter information in the initial screen and enter into the header data page using the below URL, it is working fine. The URL used is
    http://myserver:8001/sap/bc/gui/sap/its/webgui/!?sap-client=800&sap-user=xxx&sap-password=yyy&sap-language=EN&transaction=iw31%20CAUFVD-EQUNR=20006001&AUFPAR-PM_AUFART=PM01&CAUFVD-GSBER=0001&OKCODE=/00
    Can anyone please explain what is incorrect in the URL I'm passing?
    Thanks in advance

    Hi Vijay,
    Thank you for your prompt response but I do not understand your answer or perhaps I am not makig myself clear.
    Let me explain the current process:
    1) Z program collects data and exports to Memory ID 'TEST01'.
    2) Z program calls SAP program
    3) SAP program calls User Exit '001' and data is read from Memory ID 'TEST01'.
    4) SAP program collects some of the data and then executes SAP FM to continue processing.
    5) SAP FM Executes User Exit for FM and data is read from Memory ID 'TEST01'.
    6) SAP FM returns completed data back to SAP main program.
    7) Z Program collects results from SAP program.
    New process:
    1) Z program collects data and exports to Memory ID 'TEST01'. Data now includes filter for CC.
    2) Z program calls SAP program
    3) SAP program calls User Exit '001' and data is read from Memory ID 'TEST01'.
    4) SAP program collects some of the data and then executes SAP FM IN PARALLEL PROCESSING to continue processing.
    5) SAP FM Executes User Exit for FM and an attempt to read data is read from Memory ID 'TEST01' fails.
    6) SAP FM returns completed data back to SAP main program.
    7) Z Program collects results from SAP program.
    The dilemma is how to capture the proper CC filter in the FM exit when SAP is unable to read the data from memory ID 'TEST01'. I guess I can understand this since the tasks are executed in separate sessions and servers from the one that started the program since we are using a server group.
    Perhaps I am missing something with respect to exporting to memory IDs?
    Thanks.

  • Horizontal zoom level = missing peak data.

    AA is completly misrepresenting wavform peak data here imo, at first glance the waveform below AA clearly shows the wave has no peak data over 0-db
    Further zooming shows there is still no peak data above 0-db.
    Applying slightly more horizontal zoom and suddenly huge peaks way over 0-db start to appear.
    These peaks should have been clearly shown in the top picture but they weren't, why mislead peaople like this? This is completly misleading, and before anyone says those peaks are too small to be displayed at the fully zoomed out waveform view, look again at the first screen shot, the peaks are all there and visiable, they're simply being truncated by AA to 0-db (for no apparent reason.) This is rediculous, because it's rediculouse to make an app that misrepresents peak data like this, if you'r going to show the whole waveform, then show it.
    This has wasted about a day of my time so far, many of my files have also been discarded as they didn't appear to contain the correct peak data, viewing them appeared to show that they were all clipped, now it turns out they were not.
    It's easy to asume these files are clipped, when infact they are not.

    There is actually a software problem here, and all this unpleasantness has prevented everyone from actually looking at the problem.  Ni-cad's newness to the software is beside the point.  There is a problem and it should be reported as a bug.
    To the best of my knowledge, any 32-bit float file containing above-zero peaks is NEVER displayed correctly in any version of Audition or CEP when any significant length is displayed on the time axis.  Ni-Cad's pictures correctly show this -- zoomed out on the amplitude axis, the waveforms look flat-topped, as though the file had been saved as 24-bit integer instead of a float.  The 32-bit over-zero peaks only become visible when the time axis selection is relatively small.  In AA3.01 they jump into view with the time selection is between 26 and 27 seconds or less on a 100 second file, and when less than 106 seconds is visible on a file of 1000 seconds of length (16:40).
    Perhaps .pk files are unable to save waveform image data above zero, and the view is correct only when zoomed in far enough to be using direct data instead of the peak file.  If so, they must have been designed for ProTools!

  • Missing Images in WebHelp (RH6)

    I have built a WebHelp guide of 130 topics. When I first
    start to view it, all is well. I stepped through several topics in
    the Browse sequence, all OK. I used the Search box and found a few
    topics. Selected OK. Then select the Index tab, then Contents tab,
    and then the problems start. ALL the larger images fail to appear.
    The white space is there on the screen, but no pics, and these are
    a mix of GIFs, animated GIFs and PNGs. Most of the smaller images
    (say, smaller than about 150 x 250 px) appear OK.
    (I am viewing these in IE7, running under Windows XP with all
    latest updates; fast Pentium 4 + 1.5Gb RAM, hot 256Mb graphics
    card).
    If I right-click on a missing image, and select Properties,
    it shows the filename, but the file size reports "-1bytes".
    On one occasion, I noted that the progress bar at the bottom
    of the IE7 screen was stuck trying to load images, and some of the
    skin graphics ewre missing too.
    If I close the WebHelp and load it again, everything works
    OK. Until I repeat this sequence.
    Has anybody got any ideas? This problem happened on another
    computer, so it's not just this one.
    H-E-E-E-E-LP!!

    Hi Leon and Harvey,
    Thank you for your observations and thoughts.
    1. Copying images: Investigation. Open a topic in RH and
    click on an image in the WYSIWYG tab. Now switch to TrueCode view.
    You can see highlighted the exact code that it will copy. Example:
    <img src="actions1.gif"
    x-maintain-ratio=TRUE
    style="border: none;
    width: 319px;
    height: 204px;
    float: none;
    border-style: none;
    border-style: none;"
    width=319
    height=204
    border=0>
    --- (The code should be indented as in TrueCode view, but
    this forum page does not support tabs or multiple spaces).
    So, clicking on an image in WYSIWYG correctly picks up the
    filename reference, aspect ratio, exact size, borders etc.
    - Copy and paste this text to NotePad, so you can refer back
    to it in a moment.
    - Now return to WYSIWYG, click on the image and use Ctrl_C
    copy.
    - Switch to another topic and Ctrl_V paste the image
    somewhere convenient.
    - Click on the image, and look at the TrueCode page.
    The code has copied across exactly as on the original topic -
    compare with the code in NotePad.
    Now save the topic (you can delete the image later).
    Next, select the Project tab, bottom left. Look in the Images
    folder and find the image you just copied. Double-click to open the
    Image Properties, and select the "Used In" tab. You can see the
    image correctly registered in the two topics.
    Conclusion: Copying and pasting images takes the exact code
    from one topic and pastes it into another; so I do not understand
    why there should be a problem; these are only HTML web pages, after
    all - unless there's a bug in the RH background database
    interfacing?
    2. Resizing images: Although it is possible to drag the
    corner of an image to resize it, I teach people not to do this, as
    the image quality suffers badly, and it renders the image
    unreadable sometimes. I resize in Paint Shop Pro if I must; but
    prefer to take a cropped area of a real-scale screenshot if I can.
    The RH Help Guide claims that RH supports PNG; and why not?
    It's just an HTML web page. Something is deeply wrong somewhere if
    this is happening... The mystery remains: is it just a PNG
    problem?

  • Missing images in epub

    I have constructed a document in Pages that consists of an introduction and then 28 pages of images (either one or two per page) - total document length is 30 pages.
    However when exporting to an epub format only the first 22 pages of images show up in th epub although interestingly the final page which is just "The end" doe show up, so effectively pages 23-29 are missing.
    All the pages are definately there when viewed as a Pages document.  Have tried reducing file size etc.
    Any ideas would be much appreciated.

    Hi!
    There are some limitations. Here is one: Images beyond the 11MB of un-encoded image data allocation per chapter.
    Read more here http://support.apple.com/kb/HT4168
    Regards
    fruhulda

  • Mysterious missing images

    Hello,
    I'm fighting a TERRIBLE problem with my Aperture library and I'd love to see if any of you might be able to help. I've got a library with about 40,500 images. All of them are referenced and I've moved through a couple of different storage drives over the years. I just ran a "manage referenced files" on my whole library and it shows that I have about 600 missing files, spread across three offline drives.
    The problem with this is, I don't use those drives any more and I can't find where the missing images are!! I went through every project and did a search for missing images and no project shows a missing image. It only shows itself when I run "manage referenced files." I would just ignore this and use my library normally but it rears its ugly head in one other place: project exporting.
    I tried to export a project with 556 masters to put on a laptop. The export gave me an error that some referenced files wouldn't be copied. Problem is, I ran a search for missing or offline referenced files and it returns Zero. I exported the project with the "consolidate referenced images feature" and imported it into my laptop. The 556 images are there, not managed and looking good. If I run a smart search for reference files it doesn't return any. BUT If I run "manage reference files" on the library on my laptop it shows four missing files! It's crazy, I have no clue what's going on.
    rebuilt all of my libraries, I've looked at the image folders in the project and I can't figure out what's going on. Can anyone help?

    No luck on the smart album, I tried it and it reports no missing images:
    http://farm4.static.flickr.com/3289/24218107220895a27c5fo.png
    I also tried the opposite and searched for online images and got 556, the correct number.
    The problem occurs when I click on the library and run "manage referenced files", this is what I get:
    http://farm3.static.flickr.com/2107/242099628501416543c1o.png
    The thing is, the 556 images in this library are ONLY managed - there shouldn't be any referenced images. If you notice, that screen shot shows a master file with the name IMG_1151, but if I run a smart search on the project for "1151" I get no results:
    http://farm4.static.flickr.com/3050/242099643102bbf57fbfo.png
    So there are four "phantom" images that are reported as in the library that don't really exists. So frustrating! I'd love your other ideas for how to squash this bug.

  • Missing exif data

    I'm not really sure how this works but... I need an applescript that will
    (1) search a directory structure,
    (2) find the image files that are missing the exif date,
    (3) write the date created to the missing exif date field
    (4) rename the file using the created date
    I have several thousands of images that are missing the exif information. Any assistance would be appreciated...
    Thanks

    How are you trying to install it? There are two methods the easiest is to download the DMG file. Assuming you are doing the DMG file install are you saying that the installer hangs?
    I don''t install using the DMG file so I can't say if there are problems with it.
    When you get it running I do have a question for you:
    You state that you have image files missing the Exif date information and that you want to add it back
    (3) write the date created to the missing exif date field
    but where are you getting the date created from if it is not in the file? Are you saying you want to use the file creation date? You realize that is not always the same as the image creation date, right?
    4) rename the file using the created date
    So you want to rename the file using the file creation date (which is now also the exif date)?
    regards

  • Field ENAME is missing in PA40 and PA30 Screens

    Hi All,
    Field ENAME (Formatted Name of Employee or Applicant) is missing in PA40 and PA30 screens.
    Please let me know how to have this field on the screens.
    Setting so far I have made:
    Screen header in Table V_582A_B is u201C00u201D for IT 0000, IT 0001
    Assigned u201800u2019 Header Modifier to Screen Header u201C00u201D in table V_T588I
    I have defined header Modifier (T588J) as
    HM -L - C  -  IT -   Field N  - Fldty
    00   1   01  0001   ENAME  DD1
    00   1   14  0001   ENAME  DAT
    00   2   01  0001   PERSG  DD2
    00   2   14  0001   PERSG  DAT
    00   2   17  0001   PERSG  DTX
    I have checked the relevant boxes in table T588H
    Thanks in advance,
    Jitend

    Dear Jiten,
    DD1--Name  (Length 10)
    DAT--Field contents  (Length 40)
    DTX--Text for field content  (Length 30)
    the above are the field types we have in t588j table
    and you are missing the DTX field type
    maintain the 00  1  17  0001 ENAME DTX
    HM -L - C - IT - Field N - Fldty
    00 1 01 0001 ENAME DD1
    00 1 14 0001 ENAME DAT
    INSERT HERE
    00 2 01 0001 PERSG DD2
    00 2 14 0001 PERSG DAT
    00 2 17 0001 PERSG DTX
    hope this will help,
    Regards,
    mohammed
    Edited by: 0mohammed1 on Aug 18, 2011 12:46 PM

  • Need help for school! Imported images suddenly pixelated (CS6, Windows)

    Hi guys,
    Adobe InDesign CS6 Windows I'm a frequent user of InDesign, but I now suddenly am facing problems. Note: I use InDesign not only for print material, but also for creating PDF. I therefore do not necessarily need 300 dpi. Before: copy + paste from Photoshop or even web images into InDesign used to work. The images looked fine on screen and while printing. Now, when I import or copy + paste, all images look pixelated at 100%, high quality and overprint preview. It looks like InDesign is importing images 25% larger than their original size. If I resize the imported image to 75%, the image looks normal. 100% is always pixelated now! Did I mess up some sort op setting? I never had this problem before. Please help me, need this for school assignment!
    Thanks in advance,
    Justin

    First of all, thank you for your reply. I just checked an example image and both are 72 dpi, in InDesign as well as in Photoshop. I even created a document for web in InDesign, using the 'web' & digital publishing option (which is 72 dpi) and placed the same image. At 100% pixelated, when resizing to 75% crisp. I don't know what to do..
    The thing is.. I've never had this problem for years.. with importing images. Did I change settings or?
    First one is Photoshop, second in InDesign (top left is import at 100%, bottom right is import resized to 75%). In case images are too small to see, full size: http://justinwust.com/photoshop.jpg & http://justinwust.com/indesign.jpg

  • What has happened to 'Locate Images' in ID CS6?

    Does anyone know what has happened to 'Locate Images' in ID CS6?
    In CS5.5 when re-linking images which were missing InDesign used to highlight the image provided it was available in the folder, presumably to help out when you have folders of images. In InDesign CS6 this seems to have dissappeared and is somewhat annoying.
    Also when editing an image from the contextual menu in ID CS6, and saving from photoshop or Illustrator you save over the last linked file with that name. For example we have a server which our work is stored on, we do not work directly from the server but take off the project we will be working on and do this locally then copy it back to the server overwriting with the latest version. If I, or anyone else, chooses to edit an image from within the ID doc locally once copied over, saving the edit results in the edit application (PS or AI) saving over the version that is on the server and not the local version on the Mac. So when copying over all of your hard work you are infact replacing it with a new ID doc but all the previous images & vectors etc. This makes for some confusion and took a while to work out what exactly was happening. We didn't seem to have that issue in CS5.5. Obviously we are aware of the issue now and remain vigilant, for the most part! But I wondered if anyone else had noticed this issue and how they may have resolved it?
    Thanks for your help in advance.
    Ryan

    This is two separate issues. The highlighting is a behavior change and not for the better inthe opinion of many, but nothing you can do about it at the moment.
    Links, on the other hand, have ALWAYS been absolute, as long as ID can find them in the path stored in the file. Even if you copy a links folder from the server to the local machine, ID is going to ignore it and use the links on the server as long as they are there and you have a connection.

Maybe you are looking for