Missing images and other content

I'm having problems with my site I created in iWeb. It will publish fine with no errors, but when I visit my site in Safari or Firefox different images will not appear and have ? in them. If I refresh, some images will then appear and others will not. When I click on links to different pages the same thing happens different images have ? in them. If I refresh then I get different images not appearing. Sometimes it will even take me to a page on the apple site saying that the page cannot be found. This is very frustrating. My site is www.tutordigital.net (which takes you to my site published with iWeb on my Mobile Me account).
I would really like some help to solve this problem. Thanks!

Welcome to the Apple Discussions. You web site is complete. It's the server that's not loading all files every time. It took me several tries to get the first page loaded completely and then the other pages were all OK.
You name on the TUTOR page is on two lines. You might want to enlarge that text box.
If this site is a commercial site and important as far as income flow I suggest you host the site on a commercial site. You'll get much better speed, bandwidth and support - actual ear-to-ear with a live person. If it's not loading well on Safari it will be much worse with Internet Explorer.
One thing you can do to help the site load faster is to use Web Site Maestro to optimize your files and upload them. Roddy and I both use it. I host on MobileMe. It has reduced the size of many of my pages by up to 30-35 percent. It will also upload only those files that have been changed or new.
Roddy uses Host Excellence and is very happy with it. Others have responded favorably regarding GoDaddy.com. It's something to consider depending on the nature of your site.
OT
Message was edited by: Old Toad

Similar Messages

Jdeveloper visual editor do not show images and other component shapes

I used jdeveloper(10.1.3.3.0) to create an ADF BC application, I create a jsf jsp file and drag and drop components from ADF Faces Core to this file visual editor, but jdeveloper visual editor do not show images and other component shapes.
Could you tell me how I can fix this problem?
Thanks,
Mike

Actually, I need to make a dummy change to the jsp file and then it will display boxes representing the objects in the visual editor whereas I get an exception in the log:
javax.servlet.jsp.JspException: Cannot find FacesContext
This does not talk much to me !
Thanks

Whenever i open internet it shows untrusted connection....and in google images it shows few images and other quite white.....what to do?

whenever i open internet it shows untrusted connection....and in google images it shows few images and other quite white.....what to do?

Hello,
please check you system Date and time and make sure they are correct .
Moreover
A common problem recently is Firefox not being set up to work with your security software. Some security suites include a filtering feature. In order to filter secure connections (HTTPS URLs), the security software presents a fake certificate to Firefox so it can intercept and stand in the middle of the secure connection. To have Firefox trust these certificates, you may need to do something such as import a root certificate, or click something in your security software's settings.

Missing Images and CSS when going to portal/server.pt can't login

Hi,
I installed WebCenterInteraction_10.3.0.0.0 on Windows and followed all the steps mentioned in the install doc. Deployed the portal.ear and here is what I see on the command line after deployment:
Task #1 (InitPortalObjects) END (OK)
Task #2 (CheckDevKit) END (OK)
Task #3 (InitializePaths) END (OK)
Task #4 (InitializeApplication) END (OK)
Task #5 (InitializeAppWarmUpHelper) END (OK)
Task #6 (InitializeImageServerHelper) END (OK)
Task #7 (InitializeConfigHelper) END (OK)
Task #8 (InitializeResourceManager) END (OK)
Task #9 (LoadVersionHelper) END (OK)
Task #10 (InitializeActivitySpaces) END (OK)
Task #11 (InitializeVarPacks) END (OK)
Task #12 (InitializeImageServerHelperPartII) END (OK)
Task #13 (InitializeObjects) END (OK)
Task #14 (LoadCustomLoads) END (OK)
Task #15 (CheckDBVersion) END (OK)
Aqualogic Interaction startup successful.
    ======= Diagnostic Run Complete =======
    Startup completion percentage: 100% (50 steps out of 50 complete)
    ===== Portal should now start successfully ===== But when I go to http://localhost:7001/portal/server.pt I don't see any images and the css is not applied so can't login. Any idea what might be wrong. Here is the Apache httpd.conf
Include "C:/bea/alui/plumtreeconf/"
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Group/Apache2" will be interpreted by the
# server as "C:/Program Files/Apache Group/Apache2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs/2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "C:/Program Files/Apache Group/Apache2"
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#ScoreBoardFile logs/apache_runtime_status
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
## Server-Pool Size Regulation (MPM specific)
# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild 0
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#Listen 12.34.56.78:80
# Listen 80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
#LoadModule auth_dbm_module modules/mod_auth_dbm.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imap_module modules/mod_imap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
LoadModule weblogic_module modules/mod_wl_20.so
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
ServerName localhost:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
    Options FollowSymLinks
    AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Group/Apache2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#options
# for more information.
    Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
#   Options FileInfo AuthConfig Limit
    AllowOverride None
# Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Be especially careful to use
# proper, forward slashes here. On Windows NT, "Personal/My Website"
# is a more appropriate choice.
UserDir "My Documents/My Website"
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
# You must correct the path for the root to match your system's configured
# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
# or whichever, as appropriate.
#<Directory "C:/Documents and Settings/*/My Documents/My Website">
#    AllowOverride FileInfo AuthConfig Limit
#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#    <Limit GET POST OPTIONS PROPFIND>
#        Order allow,deny
#        Allow from all
#    </Limit>
#    <LimitExcept GET POST OPTIONS PROPFIND>
#        Order deny,allow
#        Deny from all
#    </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
</FilesMatch>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablemmap
#EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablesendfile
#EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error.log
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# You need to enable mod_logio.c to use %I and %O
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog logs/access.log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Full
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
Alias /icons/ "C:/Program Files/Apache Group/Apache2/icons/"
<Directory "C:/Program Files/Apache Group/Apache2/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>
# This should be changed to the ServerRoot/manual/. The alias provides
# the manual, even if you choose to move your DocumentRoot. You may comment
# this out if you do not care for the documentation.
AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|ru))?(/.*)?$ "C:/Program Files/Apache Group/Apache2/manual$1"
<Directory "C:/Program Files/Apache Group/Apache2/manual">
    Options Indexes
    AllowOverride None
    Order allow,deny
    Allow from all
    <Files *.html>
        SetHandler type-map
    </Files>
    SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|ru)/ prefer-language=$1
    RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Group/Apache2/cgi-bin/"
# "C:/Program Files/Apache Group/Apache2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Group/Apache2/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Directives controlling the display of server-generated directory listings.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
# DefaultLanguage nl
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
ForceLanguagePriority Prefer Fallback
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of        .utf7
AddCharset utf-8       .utf8
AddCharset big5        .big5 .b5
AddCharset EUC-TW      .euc-tw
AddCharset EUC-JP      .euc-jp
AddCharset EUC-KR      .euc-kr
AddCharset shift_jis   .sjis
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#AddType application/x-tar .tgz
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
#AddHandler imap-file map
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external

I am not expert in these, but please check out the following things and see whether it would solve your issue. (All these changes can be easily rolled back in case I'm wrong :). So make note of what you do)
As per your httpd.conf, you have chosen an automatic configuration of Apache by OWCI installer itself. What it does is create an imageserver.conf file in a separate directory and these settings will be included in your httpd.conf as you can see in the first line: Include "C:/bea/alui/plumtreeconf/".
If you check the imageserver.conf in that location, you would find a line like: Alias /imageserver/ "C:/bea/alui/ptimages/imageserver/". This aliases the original path "C:/bea/alui/ptimages/imageserver/" to /imageserver"
To confirm whether this is done right, check the following:
1. Acces 'http://<server ip / server name / localhost >/' from your browser
This should display the Apache home page (as per your httpd.conf, it uses the default port 80; so no port number required)
2. Access 'http://<server ip>/imageserver/' from your browser
This should display the directory structure (if its not disabled) inside your 'C:/bea/alui/ptimages/imageserver/' folder. Also confirm that all the subfolders are accessible.
3. If all the above is right, it means that your imageserver settings are right. Please check your portalconfig.xml for the correct settings: For example, <setting name="HTTPPort"> should be 7001 in your case. If its something else, change it and restart Weblogic for the settings to take effect.
Hope this helps.

Missing images and not able to use copy and paste anymore - just blank rect

Hello!
I've a problem that really scares me.
I use severall png and pdf images. But at one point keynote looses the media and just displays these grey rectangles instead of some images. I tried to figure out if it just happens with pdf images and replaced the missing pdf images through png24 images with transparency. It first worked fine (they showed up) and then it tells images can not be saved. If I open the presentation again, the images are missing. And it seems that the more images and slides i put in the presentation, the more images are missing…
But there is more: I even can't copy and paste these images anymore. If I try to copy one of the images I just have replaced (because they have been lost by saving), it just pastes the blank grey rectangle instead of the image.
This really is a problem because I now have to repetitive tasks (like same animation for the same image in the same size) over and over again. And when I save the doc – they are al gone again…
It really scares me and I don't have an idea how to solve this.
It also happens, if I repleace an pdf image with an png image and than try to copy this new png image. However I am able to drag the image from the Finder again.
I am working on a PB G4, 1.5 GHz, 1 GB RAM.
My Keynote Version is 3.0.2.
The Keynote Dokument is saved and opened from a G4 X-Serve wich is only used by Macs (so no Windows Filesystem anywhere). I still have anough space on both, my local and the server volume. I don't transfer the Keynote document. So it should not be a problem with the names on the files… And the files are just exported from Adobe Illustrator (png 24 files with "save for web" and the pdf files are saved as Illustrator pdf) – so they should really be fine and not corrupted…
At this time the Keynote document has a size of 179 MB (because of a video) and only 16 slides. And the theme was built from scratch – so no import from Powerpoint or so…
I looked through the Keynote preferences and found a thing like (sorry self-translated from german version to english) "scale placed images to slide-size". I wondered if keynote saves a copy of the sacaled image after that and corrupts the image itself? But I don't think so.
I've had these problems with earlier versions of Keynote, but it occured just sporadically and I could solve it through pasting it again. But this time I can not solfe it anymore.
Does anybody encounter same problem? Or has a hint?
I really would appreciate, because I have to finish the presentation very soon and are not able to work properly with that. Furthermore, I am scared of saving and opinging the presentation again, because the lost files can not be replaced…

I now have a hint:
As a colleague said, he encountered some problems with usagerights on our fileserver (XServe). He said he wasn't able to read files he put on the server himself again…
If this is true, the same could have happened to Keynote for placed images, as Keynote writes these images as separate files in the doc package…
I will try to work on my local volume and see if it solfes the problem.
But sooner or later I will have to place the whole thing on the server again…
Do you think this is the reason?

How to send images and other colored text in email body

Hi
We are using SAP CRM 4.0 and we would like to send email to our customers using actions configured for activity. Our objective is to send Marketing Emails containing <u>Images and Color texts</u> in the BODY OF THE email and not as a PDF attachment.
The only relevant provision we could see in SCOT is either Text or PDF. On using text , we are loosing all images and color. The PDF option works , but the email generated is a blank email with PDF document as attachment.
We want the matter to be inserted in the body of the email and not as attachment.
Please do let us know if any one has faced similar situation and is there a resolution.
Thanks and Advance.
Regards
Sachi

Are you pasting in the HTML code?
You can't use the formats in the CRM editor to set bold text, etc. You have to use the HTML code and have set the Form up as Internet mail
http://help.sap.com/saphelp_crm40sr1/helpdata/en/82/dbfd38ccd23942e10000000a114084/content.htm
Here's the first screen setting for my test email:
Form          Y_TRADE_SHOW_INVITATION        / Trade Show Invitation (Test)
                                                                                Form Usage              1 Internet Mail (SMTP)
    Text Type               1 HTML
    IBU Scenario
    Customer Scenario
Page Format             DINA4         Status    Created
Characters Per Inch     10.00
    Lines Per Inch          6.00
    Style                   SYSTEM SAP Smart Forms Default
Created By         MANECITO            Changed By         MANECITO
     Date               01/16/2007          Date               05/22/2007
     Time               09:49:12            Time               18:01:51
then, your email has to have the HTML tags
A bare minimum is your email has to have the <HTML> tag at the top, but it's advisable to be sure you have a more complete setup like this:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<title>Untitled Document</title>
<style type="text/css">

</style>
</head>
<body>
ENTER YOUR HTML MESSAGE HERE
</body>
</html>

Internal links in portal (CSS, images, and other struts actions)

Good morning gurus! I have another question regarding Struts Portlets. We have an application that builds a page with an image that comes from the database. The application is composed of two Struts actions. One that's in charge of drawing the page and the other action is in charge of bringing the image from the database. The second action is called from a JSP (img src="/getImage.do"). In portal, once the portlet rendered the JSP it doesn't recongnize the other links inside the JSP (the call to the second action). Also, other links suchs as images, CSS, and others Struts actions are not recognized. How can I access images, links, and CSS from the main application (the actual application).
Best regards,
Marcelo Oliva
Message was edited by:
molivas08

Hi Andrew -
This is a pretty big topic for one thread ... I will try to provide some pointers on where to look for more information.
1. Need ability for non-html literate authors to update text, images and links on their portion of a shared web page
In the following whitepaper, see the section: Associated Funtion for Item Display
http://www.oracle.com/technology/products/ias/portal/pdf/oow_10gr2_1336_fender.pdf
This will allow you to prompt your non-HTML literate users for the "parts" to display and you worry about the UI.
2. Need ability to enforce common look and feel on content provided by non-html literate authors.
Create pages based on Templates. Templates can force the style on users. Again - do not use text items and the RTE for users, you control the display with an Associated Function.
3. Prefer ability to approve content before it goes live.
Grant content contributors "Manage with Approval" access
5. Need advanced search capabilities
Check out the search section on Portal OTN
http://www.oracle.com/technology/products/ias/portal/content_management_10gr2.html
Hope this helps,
Candace

Can jpdk portlets deliver images and other binary files?

From my understanding, portlets can only return text content (html).
Images and pdf files would be impossible to deliver via portlets.
So if you portlet has a link to a pdf or a image, this URL would be a direct reference to that application or file resource, and not be tunnelled through portal?

Q. From my understanding, portlets can only return text content (html).
A. Portlets can return html or mobile content
Images and pdf files would be impossible to deliver via portlets.
Q. So if you portlet has a link to a pdf or a image, this URL would be a direct reference to that application or file resource, and not be tunnelled through portal?
A correct
You may wish to look at the lotto sample which renders gif's

Alernatives To Sharing Video And Other Content?

Hello All,
I have a meeting with the head office. Corporate has a site
that they
run independently of ours. I create short videos of our
products and
they want to utilize those. We also have images and
descriptions of
products that they could also utilize.
This is the question.
Besides just handing them a disk, using IFrames or just
linking to a
page that is hosted on our domain, I'm looking for
suggestions for how
to share content. What other solutions have you seen?
Are there any new solutions out there?
Are RSS Feeds a good option? What is an advantage of an RSS
feed. (I
have not created one)
I just want to make sure that I can offer them the full
spectrum of
possibilities.
Thanks for helping out, Lee

You could publish an RSS news feed with TEXT links to
articles, videos,
podcasts, slideshows, images, whatever... that is contained
on your server.
Have Corp site subscribe to your news feeds. When your feeds
change so do
the links on their site.
How to Create an RSS Feed with Notepad, a Web Server and a
Beer - the beer
is optional :-)
http://www.downes.ca/cgi-bin/page.cgi?post=56
RSS Specifications - everything you need to know about RSS:
http://www.rss-specifications.com/display-rss.htm
FeedForAll - feed generating software for win/mac:
http://www.feedforall.com/
Feed Roll - javascript generator for including news feeds in
websites:
http://www.feedroll.com/rssviewer/
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"Art" <lee_*[email protected]> wrote in
message
news:g2r4no$1hm$[email protected]..
> Hello All,
>
> I have a meeting with the head office. Corporate has a
site that they
> run independently of ours. I create short videos of our
products and
> they want to utilize those. We also have images and
descriptions of
> products that they could also utilize.
>
> This is the question.
>
> Besides just handing them a disk, using IFrames or just
linking to a
> page that is hosted on our domain, I'm looking for
suggestions for how
> to share content. What other solutions have you seen?
>
> Are there any new solutions out there?
>
> Are RSS Feeds a good option? What is an advantage of an
RSS feed. (I
> have not created one)
>
> I just want to make sure that I can offer them the full
spectrum of
> possibilities.
>
> Thanks for helping out, Lee
>
>
>
>
>

PDF with hyperlinks to images and other PDFs.

Hi, All.
I would like to create a small booklet with approximately 12 to 16 pages as a PDF document but wish to have images and text in the document set as hyperlinks so that they can launch other images and/or documents. In other words, a viewer could click on an image or text and then see an enlarged image open on the center of his computer screen or see another document open over the original PDF. This would work in a similar fashion to what one can do with interactive books on the iPad created with iBook Author.
The questions I have are:
Where can I find more material to read on how to create PDF with these features?
I have seen PDFs that open with an application on screen that makes them 'feel' more like a real magazine. They are not a typical Acrobat or similar PDF viewer but rather an application that 'flips' the pages in a similar manner to what one would do holding a real magazine. Is it possible to do this with the PDF documents launched by hyperlinks on my PDF document?
Can these hyperlinks open enlarged images in the center of the screen while the remaining area around the image (background) become darker to place emphasis on the image?
How can I learn more about these features and how to use them with Acrobat and PDF documents?
In case the information is relevant I am currently running Acrobat 9 Pro version 9.5.3 on a Mac.
This is sort of an urgent project so any help you can share will be very appreciated.
TIA,
Joe.

hi
flash.net is the package you need on flex, inside it you
several methods that can help you, 2 of them are:
URLVariables and navigateToURL
look at them and if you can't do it, just hire me, i'll be
glad to do it :D

Per site, list driven footer and other content areas on a SharePoint 2010 master page?

So I worked with a vendor to provide a js, a powershell script and <div> content holders in a master page that would pull the content dynamically based on the site or subsite, and more specifically from a custom list in that site. To explain, if I
have a root site collection but want to be able to have the end user control the site content, such as a custom top navigation (above the global) and custom footer, and custom place holder content that would appear under the navigation; I would like to have
that content pulled from a list.
My goal is to not have a "custom master page" for the many many sites we have in our environment. I am using twitter bootstrap as the foundation for the master pages, then a set number of page layouts pending whether they want left nav to show
or not. I also typically just use the v4.master for the system pages, but am not sure if that is a best practice either being that the list display forms for a publishing site are ugly so need customized per list.
Has any one done anything like this and if so could you point me in the right direction? Any guidance would be greatly appreciated. Right now am working within SP2010 but will be testing for SP2013 in the near future.

Hi,
Based on my understanding, you might want to display dynamic content in the pages which reference a specific master page, the content stores in a custom list, users
can update the master page by updating the corresponding list items.
Then there would be two main steps in a solution like this:
1. Data retrieving of a list: JavaScript Client Object Model can help to query the needed items from a list;
JavaScript Client Object Model
http://msdn.microsoft.com/en-us/library/office/hh185006(v=office.14).aspx
More information about JavaScript Client Object Model:
How to: Create, Update, and Delete List Items Using JavaScript
http://msdn.microsoft.com/en-us/library/office/hh185011(v=office.14).aspx
2. Modify the master page: With the data retrieved, we can then change the HTML source code of a page using JavaScript.
About how to
modify the HTML using JavaScript:
http://www.w3schools.com/js/js_htmldom_html.asp
http://njarb.com/2011/06/update-html-content-using-javascript/
We can apply the custom JavaScript to the master page, then when users open a page which references this master page, the JavaScript will run, get data from the custom
list, change the HTML source of the current page and display the content you want.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

PCF file missing hostname and other information

Using Cisco VPN Client 4.8.01.0300, several users have reported issues with being unable to launch the VPN Client software. The client returns Error 5 - Hostname not available; upon reviewing the .PCF file, the hostname and other group info is now missing; an import of a valid .PCF file resolves the problem. I've seen variations of this issue discussed on this board, but no solution to the underlying problem - something corrupts the .PCF file.

i think the problem is because of cisco bug CSCsa74320

Updated to 4 a while ago, but the last versin of 3 is lingering and reappears, want to get rid of it, as well as disk images and other clutter that usually goes away after an update. Any ideas?

really two things: one: the last version of FF 3 keeps reappearing when, for example, links in emails require opening the browser. Example: an email from netflix with a link to the site which I clicked on to update some info. Instead of going to/thru the current browser FF4, the previous version appears---more accurately the "firefox updated" page for 3.16 or whatever it was. Why is this still there? Why is there more than one copy there in the first place, after updating?
also, related perhaps, why does the FF4 disk image and application folder always appear when I open FF4. Usually they go away after the update and first restart, but now they appear every time I open the browser? I have snow leopard 10.6.7 if that tell u anything

Only if you had previously installed an app that would periodically email you its location. Not that the iPod has to br on and connected to the internet.

IPhone and "Other" content ....

I rented a movie yesterday morning, added it to my 4GB iPhone and when I got home from work, I moved the movie back to my iTunes library so that I could finish watching it on my desktop. So when I syncronized, the purple video content bar disappeared. However, the orange bar appeared: 1.23 GB of other content to be exact! Rather than panic, I immediately removed all songs and music videos and syncronized again. THERE STILL REMAINS 1.23 GB OF CONTENT THAT I CANNOT FIND AND REMOVE. (3.5 GB capacity minus 2.3 GB available equals 1.23 GB of mystery content....arghhhh!!) I welcome your input. I will restore only as a last resort. Thanks, René

Can you please point me to the thread? Mine increased to over 4 GB after upgrading to latest iTunes...ACK! I dunno how to find the extra data....and it was never this large before...
Thanks!

Manually PLACE images and other files in illustrator

I see a tutorial of Infographics by Nigel French, In this tutorial when the Mr Nigel use place option to import images or other illustrator files the illustrator not auto put images at center but ask where to place images or how much area to be covered by this image or file.
I search about this but not found anything relating to this topic, I don't know whether this is plugin or illustrator function/feature.
I hope you would answer,
Here are the pictures to ellaborate

Thanks Monikia for answering
Yes I mean place gun with 1/1 symbol besides the arrow but how to enable this in CS6 version 16.2.1. I haven't seen any option in preference or in place window.

Missing images and other content

Similar Messages

Maybe you are looking for