Missing images in "all projects view" and System Pref- Desktop!
I was about selecting the image pick for my projects in the Aperture's all projects view to find out that some of my picture are missing.
I had verify that the image I was looking for is actually in my project and isn't rejected. I even perform a library rebuilt, but still a few of my pictures aren't showing up in this view. Anyone is also having this issue, know why or how I could fix this?
beside, I also have a similar issue of some pictures not showing up in the System Preferences under Desktop. All my Aperture's project are there, but not all pictures aren't showing up. By the way, the missing pictures there aren't the same as the ones not showing up in the "all projects view".
SeaBeast wrote:
I was about selecting the image pick for my projects in the Aperture's all projects view to find out that some of my picture are missing.
I had verify that the image I was looking for is actually in my project and isn't rejected. I even perform a library rebuilt, but still a few of my pictures aren't showing up in this view. Anyone is also having this issue, know why or how I could fix this?
The thumbnail you are scrubbing across with the mouse is only 156 pixels wide on the screen. If you have more than 156 images in the Project it'd be pretty complicated to show every single one. As far as I can see the All Projects view is there to give you a quick overview of the Project content, but isn't designed for 'detailed' browsing.
Find the image you want in it's Project, Right/Control-click and choose 'Make Key Photo'.
beside, I also have a similar issue of some pictures not showing up in the System Preferences under Desktop. All my Aperture's project are there, but not all pictures aren't showing up. By the way, the missing pictures there aren't the same as the ones not showing up in the "all projects view".
Only images that have had Previews generated will show up in other applications. Have you made sure that the Previews are up to date?
Ian
Similar Messages
-
Images not showing in viewer and browser
I've been using Apreture 2.1.1 without any problems until yesterday. Even though all my projects are in tact, I can no longer see the images in the Aperture viewer and browser. I really don't know how this happened. To rectify the problem I did the following:
1. Verified and repaired the Disk using Disk Utility
2. Logged in in Safe mode and did the above
3. Uninstalled Aperture, removed all reference files and re-installed
4. Opened the Library and photos are all intact.
5. Uninstalled Aperture and re-installed the 2.0 version
I did all the above but still have the same issue. Just can't figure out what is wrong here.
Any suggestions would be highly appreciated.
thanks
ps. Forgot to add this: It also crashes when I want to quit it
Message was edited by: AlexGoAlexGo wrote:
I've been using Apreture 2.1.1 without any problems until yesterday. Even though all my projects are in tact, I can no longer see the images in the Aperture viewer and browser. I really don't know how this happened. To rectify the problem I did the following:
1. Verified and repaired the Disk using Disk Utility
2. Logged in in Safe mode and did the above
3. Uninstalled Aperture, removed all reference files and re-installed
4. Opened the Library and photos are all intact.
5. Uninstalled Aperture and re-installed the 2.0 version
I did all the above but still have the same issue. Just can't figure out what is wrong here.
Any suggestions would be highly appreciated.
thanks
ps. Forgot to add this: It also crashes when I want to quit it
Message was edited by: AlexGo
did you dump the preferences and appropriate other files? prior to the reinstall? otherwise if any of those files are bad you'll be installing aperture with the same possibly corrupt files.
your problem sounds like a hard drive or cable issue, have you swapped out cables?
what cable are you using? eSATA? FW800? -
No Way Of Sorting "All Projects" view
Hi,
I've noticed something. When you're in All Projects view in Aperture 2, with the tiles similar to the Events view in iPhoto '08, there appears to be NO way of sorting the Projects. In iPhoto, you can sort the Events by name, or date taken, ascending or descending and even manually arrange them. But in Aperture, the Pro app, there are absolutely no options. Your Projects are sorted by date, oldest at the top, newest at the bottom.
Am I missing something or have Apple really given their Pro app fewer options than iPhoto?It's funny when "consumer" features you take for granted (in iPhoto) aren't available in the pro apps (Aperture). There are quite a few things actually that iPhoto seems to do better than Aperture. Fortunately, both apps are made by the same company, so Aperture can freely copy features from iPhoto whenever it wants.
-
All Projects View - reverse order
Hi,
I love the "All Projects" view in Aperture 2.0 (it kinda reminds me of iPhoto actually), but I don't like the fact that its sorted with old projects first. Every time I click on it I see my old projects from 3 years ago. Is there a way to sort it like I sort my "all photos" view with newest projects at the top? Usually when I click on "all projects" I want to see the current projects I am working on, not old ones, and it's annoying to have to scroll all the way down.
thanks,
-Jacksoni've asked the exact same question a while back, with no answers yet.
http://discussions.apple.com/message.jspa?messageID=6675086#6675086 -
All Projects view - Sort Order
Is there a way of changing the sort order of the All Projects view - either to name order, or custom rather than the way it seems at the moment - time of project creation from oldest to newest?
JasonI am also looking for a way to do this. When you have 300 projects, it's annoying to always have to scroll down to the bottom every time you click into projects view. I wonder if there is a hidden preference or something like that. Can anybody help?
-
Aperture 2.0 All Projects View Organization
Is it really possible that it's not possible to organize the projects in Apertures "All Projects" view, by
name or any other way except the default chronological???I don't get it. My projects are sorted alphabetically, but I want them by date. I can't find a way to do it, but searching these forums it seems like most people have them by date as the default....
-
Scanning in Mavericks? I can no longer use the scanning function in my HP Officejet 4500.
HP says to go through Preview, Image Capture, or Print/Scan in System Prefs.
Still doesn't work. Any ideas/similar experiences?Sure it is, yet it's called HP LaserJet Professional M1210nf MFP Series *
Today, I followed your other advice, and deleted the printer, deleted the /Library/Printer/hp folder, downloaded the entire set of driver, re-installed the printer twice, once with the driver, once with Bonjour.
The Bonjour Printer has the scan option active, but it is doesn't work (refer to above.), it is called M1217nfw
The Apple Driver Printer doesn't show the scan option at all, it is called M1217nf (as on the http://support.apple.com/kb/HT3669#HP list.) This model number doesn't exist, as far as I can tell.
Still, everything works perfectly in Snow Leopard, for a MF printer that has been manufactured years after Snow Leopard was released.
Why going up in software version means going backwards in compatiblity for brand new product is really the question that puzzles me here. -
I took my G5 to the Apple store for a check(fan speed) and when I got it back, when I go to System Prefs/desktop & Screensaver I can no longer see the folders representing the photo albums. I thought it might be an iPhoto Issue, but now I'm not so sure. I'm running 10.4.10 ans iPhoto 6.0.6. I created another user and tried the same thig and it's not working there either. I have 4100+ images in 30+ albums.
I'm almost ready to load 10.4 on my 2nd internl drive and then use migration assistant, but I don't know if THAT would work. I have repaired permissions, ran Diskwarrior 4.0, thrown out plists and prefs, and caches. I've even removed the .xml file, still without success.OK FOLKS!!! GET THIS!! It was a single corrupt photo. The photo worked fine within iPhoto, but caused the disconnect with the system prefs. it wasn't a very big photo, or old, but I did drag it from a web page.
I ended up creating new iPhoto Libraries, and importing the photos until it broke. Then I went through the files within the one questionable folder until it broke. I pitched the file from the iPhoto Library, and my hard drive but the Library stayed broken. I just deleted it, and started over. I have all my original photos back, and in the proper albums again. Now to the tweaking all over again. 6000+ photos to go through. -
System pref - desktop is freezing
New MBP Retina. I go to system prefs, desktop,to set a picture and the beach ball appears and will not leave, force quit is the only way to get out of it.
Then I suggest you first start out wiping the complete drive by booting the system from the internet recovery system, command+option+r keys and hold them down until you see a globe on the screen, and repatition the drive as one partition to erase everything on the drive then reinstall the original shipping version of os x.
Then install your programs one at a time and reload your aperture library. If you still have problems it might be hardware related and should go to a apple store to be checked out. -
Images look great in viewer and terrible in canvas
I made some map animations in Motion and Keynote. They plook perfect in the Viewer window but terrible in the Canvas window. I have a 480i DV/NTSC timeline. As far as I know, all my settings are correct.
The problem is that colors look blocky in the canvas window. Is there any way to get the Canvas window to display images as cleanly as they are displayed in the Viewer window of FCP7?
Is there anything I should do to these images in Photoshop to prep them for FCP?
Thanks very much in advance,
- Nick
Message was edited by: Nicholas Natteau1The Viewer just shows whatever you have in its native state.
Moving the clip or image to the Canvas forces it to display at the resolution and color space of the codec used in the Sequence setting.
FCP works best with still images that were saved in the TIFF format. PNG will also give good results. You should always use images with a RGB color space.
The problem is that colors look blocky in the canvas window.
The images very likely need to be rendered, then they will look much better.
Consider also that the Canvas always shows a low res proxy. This is less demanding on system resources for real time playback. To see what you really have requires connecting a calibrated, broadcast monitor or at the very least, an excellent TV.
Is there anything I should do to these images in Photoshop to prep them for FCP?
Unless you need to zoom and pan the images, open one of Photoshop's Film & Video presets that matches the pixel dimensions of your FCP timeline settings. Paste your images into the preset template and use the transform tools to scale them to the right size. -
Image looks truncated in viewer and canevas
Hi there,
I am begining a new SD project in which I imported a QT sequence that was generated with Mpegstreamclip.
I chose easy settings mode in FCP.
In both viwere and canevas, the image does not look "centered".
As a matter of fact, it is truncated on the right side and when I play the sequence, a vertically moving blueish-greenwish band appears on the right side.
I have checked that the sequence plays all right in MPEG streamclip.
By the way, if I import another sequence that was shot with a HD photocamera, 16:9 format, a blueish band also appears on the right side.
What could be the problem ?
It is the first time I see that
Thanks in advance
IvanThe image on the left in PS looks the same in Picasa Image
Viewer (I selected it to be color managed based on the monitor profile), looks the same in Windows Image Viewer, and looks the same in the thumbnail. The image on the right in LR is how the picture looks when I look at my image in Firefox but in Internet Explorer and in Chrome, the image looks like the image on the left in PS. The image below shows how the thumbnail looks different from the actual picture when it's double clicked and viewed in Picasa. The thumbnail (which shows the subjects having green skin) would be how I saw it online while the double clicked version is how I saw it in PS, even though it was sRGB (I checked the image properties to make sure of the color space).
I have a ATI 5470 GPU on my ASUS 17.3 inch laptop. Not sure about the drivers. -
Activity missing in Workforce planning:project view
Dear experts,
I an caught up with the following problem:
1) I created a project with WBS and activities.
2) Created relationship between activities.
3) Created project team
When I try to perform workforce planning (project view) using transaction CMP2, some of the activities are missing in the list.
Please let me why this happens and also how to include the missing activities.
Thanks and regardsHi
Please check following prequisites-
1.HR mini-master record (infotypes 0001and 0002).
2.Assigned work centers to the internally processed activities.
3.Entered Formulas in the work center to determine capacity requirements.
4.Scheduled the activities to generate capacity requirements.
5.Assigned only one labor capacity to a work center. (that is catagory 002)
6."Determine Cap. Check" indicator is ticked in the network header.
Regards -
Moving all Materialized View and logs at schema level using data pump
Hi Experts,
Please help me on how can I exp/imp all Materialized Views andMV logs (as these are local MVs) only of complete schema to other database. I want to exlude everything else.
Regards
-Samar-Use DBMS_METADATA. Create the following SQL script:
SET FEEDBACK OFF
SET SERVEROUTPUT ON FORMAT WORD_WRAPPED
SET TERMOUT OFF
SPOOL C:\TEMP\MVIEW.SQL
DECLARE
CURSOR V_MLOG_CUR
IS
SELECT DBMS_METADATA.GET_DDL('MATERIALIZED_VIEW_LOG',LOG_TABLE) DDL
FROM USER_MVIEW_LOGS;
CURSOR V_MVIEW_CUR
IS
SELECT DBMS_METADATA.GET_DDL('MATERIALIZED_VIEW',MVIEW_NAME) DDL
FROM USER_MVIEWS;
BEGIN
DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'SQLTERMINATOR',TRUE);
FOR V_REC IN V_MLOG_CUR LOOP
DBMS_OUTPUT.PUT_LINE(V_REC.DDL);
END LOOP;
FOR V_REC IN V_MVIEW_CUR LOOP
DBMS_OUTPUT.PUT_LINE(V_REC.DDL);
END LOOP;
END;
SPOOL OFFIn my case script is saved as C:\TEMP\MVIEW_GEN.SQL. Now I'll create a mview log and mview in SCOTT schema and run the above script:
SQL> CREATE MATERIALIZED VIEW LOG ON EMP
2 /
Materialized view log created.
SQL> CREATE MATERIALIZED VIEW EMP_MV
2 AS SELECT * FROM EMP
3 /
Materialized view created.
SQL> @C:\TEMP\MVIEW_GEN
SQL> Running script C:\TEMP\MVIEW_GEN.SQL generated a spool file C:\TEMP\MVIEW.SQL:
CREATE MATERIALIZED VIEW LOG ON "SCOTT"."EMP"
PCTFREE 10 PCTUSED 30 INITRANS
1 MAXTRANS 255 LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL
DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE "USERS"
WITH PRIMARY KEY EXCLUDING NEW VALUES;
CREATE MATERIALIZED VIEW "SCOTT"."EMP_MV" ("EMPNO", "ENAME", "JOB", "MGR",
"HIREDATE", "SAL", "COMM", "DEPTNO")
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40
INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576
MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1
BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE
"USERS"
BUILD IMMEDIATE
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE
DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE "USERS"
REFRESH FORCE ON
DEMAND
WITH PRIMARY KEY USING DEFAULT LOCAL ROLLBACK SEGMENT
USING ENFORCED
CONSTRAINTS DISABLE QUERY REWRITE
AS SELECT "EMP"."EMPNO"
"EMPNO","EMP"."ENAME" "ENAME","EMP"."JOB" "JOB","EMP"."MGR"
"MGR","EMP"."HIREDATE" "HIREDATE","EMP"."SAL" "SAL","EMP"."COMM"
"COMM","EMP"."DEPTNO" "DEPTNO" FROM "EMP" "EMP";
Now you can run this on other database. You might need to adjust tablespace and storage clauses. Or you can add more DBMS_METADATA.SET_TRANSFORM_PARAM calls to C:\TEMP\MVIEW_GEN.SQL to force DBMS_METADATA not to include tablespace or/and storage clauses.
SY. -
How should I go about backing up all my files and system preferences?
Hey, I'm planning on upgrading to snow leopard very soon, but I'm afraid of loosing all my files and preferences. Backing up my files isn't really the problem, it's the backing up of the system / application preferences that worries me. I have well over 150 applications, each customized the way I like. Is it possible to backup and then (after installing 10.6) restore my preferences to my computer without worries of damaging my OS?
Message was edited by: rider13Do yourself a favor. Get an external disk that's at least twice the size of the amount used on yur internal HD (plus expected growth). 3 or 4 times is better.
Then make regular backups of your entire system. If you use Time Machine (there are other options, of course), after the lengthy initial backup, let it do it's hourly backups. They're normally very fast. This will get you two large benefits:
When you delete or change something in error (such as Save instead of Save As), or something gets corrupted, you'll have an excellent chance of recovering a previous version, easily.
When your internal HD fails (and they all do, sooner or later), or something else awful happens, you can restore your entire system to the exact state it was in at the time of any backup: OS, apps, purchase keys, configuration, settings, preferences, data, ... well, you get the idea.
You might want to review these:
Time Machine Tutorial
Time Machine 101
How to back up and restore your files
Time Machine Features
Apple - Support - Mac OSX v10.5 Leopard Time Machine
and perhaps browse the Time Machine - Frequently Asked Questions *User Tip.*
If you have a problem setting-up or using Time Machine, start with the Time Machine - Troubleshooting *User Tip.* It will show you how to locate the message(s) that describe the problem, then help you fix it. -
Application and system prefs errors after restoring user
When I try to open a few of my applications, I'm getting this error message: "[application] cannot be opened because of a problem." And something about check with the developer for compatibility with this version of OSX. This is happening with all the iLife apps and Mail, as well as Logic 9.
I'm also getting an error when trying to open certain panes of system preferences (https://discussions.apple.com/thread/5082670?start=0&tstart=0).
Unfortunately, every time I search up help on this issue, I can only find topics regarding Lion and Mountain Lion - but I am on Snow Leopard and this is happening!
Recently, I went through a process of renaming my main user, by deleting it but keeping the files, changing the deleted user name, and restoring the user: https://discussions.apple.com/thread/2302635?start=0&tstart=0.
Everything else seems to work fine, except for these 2 problems.
I have already: (a) Unchecked 32-bit mode for system prefs, (b) Deleted proper prefs files in the Library (com.apple.prefs....), (c) Tried launching apps from terminal, (d) Tried deleting aliases to apps and restoring them.
Nothing is working! I am about to back-up my system and re-install Snow Leopard, but I wanted to explore other avenues first.
Thank you!Reinstall SL. Only OS X components and basic Apple apps will be replaced. Then, run the 10.6.8 v 1.1 COMBO updater.
Maybe you are looking for
-
Hi, One of my clients wants to implement Rebates. Can you ket me know what are the various kinds of rebates that are supported by sap is retail. Some business processess / best process documents will be helpful Thanks Barry
-
IMessages are not coming through to iPad
Recently, my iMessages have not been coming through to my iPad. My sent messages will show up, but the received ones will not. I have check all of my Message settings, and they have not changed from what they were before. I've checked my Wifi conne
-
Hi experts, Will like to know if there is any t-code to get the list of PO's returned.
-
Scene Selection Missing in Action
My production of a DVD of movie clips did not successfully include chapters in Scene Selection. In iMovie, I highlighted movie clips in the clip viewer and added chapter markers via the button below the Chapters panel. The yellow diamonds showed up i
-
So I just downloaded iOS 6 then my phone turned off and not it won't respond to any buttons I press. Please help ASAP!!