Missing images in E-mails on iphone4

I noticed that on my iphone 4 mail, I get some e-mails with images embedded that don't come up (just show a question mark in a box where the image should be). But when I look at the e-mail in both the mac mail client and the web client of mobileme, the images are there.
It happens with small images (<100KB) and bigger images as well.
Anyone else seeing this?

I am also having the same problem. Downloaded emails one of which contained a picture which displayed correctly. Showed it to another person still ok an hour later it had disapeared to be relaced by a question mark.
I had not installed or changed anything prior to the image going AWOL.
Does anyone have any suggestions?

Similar Messages

Missing images in Safari and Mail

Ever since upgrading to Lion earlier this year I have noticed a problem with images in Mail and Safari. I'm now on ML (10.8.2) and the problem persists. Hopefully someone can suggest a solution as it's slowly driving me a bit crazy.
In Mail, when I view an HTML email with images for the first time there is usually one image showing as missing/unloaded (little blue square with a question mark). Just one, and usually one near the top i.e. one of the first images on the page. If I refresh, e.g. view another email then instantly return to the first email, all the images are there. 'Display remote images in HTML messages' is ticked and always has been.
There is a similar problem in Safari. I load a webpage and there is usually at least one image missing/unloaded. Refreshing the page will fix the missing image. Sometimes it's the CSS file that doesn't load leaving an unformatted page, but it's more common with images. I looked in the 'Error Console' today and the error I get for the missing items is "Failed to load resource: The operation couldn’t be completed. Invalid argument".
After the problem started I switched to Chrome and never had the problem once, but I prefer Safari and would like to switch back. I presume the almost identical issue with Mail means that they are somehow linked.
Anyone have the same issue, or any ideas as to what might be causing it?

I think I've narrowed this down to the AVG Linkscanner. Turned it off and all images are present and correct.

Missing images in Word Document

I am having a problem with some missing images when I
generate a Word document from RoboHelp HTML. I have seen similar
problems in these forums and have tried the solutions without
success. I have Word 2002 SP3. I have images in my document that
have conditional tags applied to them. Up until now, I have not had
any trouble with them generating in Word. I added some more images
(using RH to import them into my doc) and I set up the conditional
tags to print those and not the others. In some cases, the images
are generated and in others they are not. There is no X in its
place just a blank line. I have tried erasing the .CPD file and
re-generating. I have tried removing and re-inserting the image.
Also, if I generate the html web help, the images are all there. No
problem. I have tried embedding the images and using links and get
the same result. I have not tried to just generate the PDF because
I need to tweak the document in Word first before generating the
PDF to make everything look good.
I have also uninstalled and reinstalled Robohelp. That didn't
help either. The image properties all have none (not left or
right). I am running out of ideas to solve this problem. Everything
worked great before so I can't figure out what could possibly be
wrong especially since the webhelp is fine. I also tried moving the
project to my C drive. No change either. The project usually
resides on a network drive.
If anyone can help, I'd really appreciate it since I have a
document to print for a customer ASAP! Thank you in advance.
Evelyn

I have been suffering with this problem of missing graphics for some time, even with RoboHelp 8. However, it now seems that I have found the answer and just in case anyone else is still having this problem I thought I would share what worked for me.
After doing some Google searching I found the web site: http://www.gmayor.com/mail_merge_graphics.htm where the following solution was offered for problems with Mail Merge graphics:
"If you find that on merging to a new document the resulting paths have been changed to something like: {INCLUDEPICTURE"../,./../program%20files/My Program/ProductPictures/ImageName.jpg"\*MERGEFORMATINET} and the merge does not work correctly:-
(In Word 2003) Select Tools > Options > General > Web Options and uncheck "Update links on save""
Whatever this has to do with anything I do not know, but it magically fixed my problem and all images are now appearing in the RoboHelp Word output.
Cheers,
Chris

Missing Images Grey Box with ?

Have tried drills to view inserted images in 4-page Pages doc, going thru Finder to view, reinsertion of images, trashed com.apple.iwork.Pages.plist,,reinstalled iworks '05 CD, upgraded to 1.0.2, read copious discussions from gurus, still no joy. Images I inserted still there, elusive as ever which remain hidden with that ugly "X" and "?" when reopening doc. Am Mac addict from day one, average Mac user, not tech guru, programmer, developer but need step by step instruction for my low-level 83-year-old comprehension. Pages works o.k. with glitches but the missing image grey box with X and ? reared its ugly head last April and still with me on occasion. Finish 4-page Pages monthly Newsletter 5 meg doc with about 15 inserted jpeg images, "save as" for local distribution printing plus "pdf" for e-mail transmission, print it but when reopening doc after closing I get the grey box with X and ? for my inserted images and have to start over. Images I inserted originally still there opening thru Fiinder viewing "Package Content". Ran G5 Hardware CD test, no problem. From discussions I noted one solution that worked by uncompressing "index.xml.gz" file. Tried that with Stuffitt which didn't work. Am unable to view to see if my images were corrupted as the Discussion Guru "Sylvain Pedneault" outlined on Sep 15, 05, that his images had property sf:corrupt="true". Could be that's my problem if I knew how to determine and fix. I've hit a firewall and am patiently waiting for Apple Pages gurus to resolve this issue still unresolved which I'm confident they will, but at my age I don't buy green bananas. My frustration level is maxed out and will appreciate help in simple step by step language as a work-around until Apple Pages comes thru with upgrade. If I make it thru the Pearly Gates, not guaranteed, I'll put in a good word for the Guru who can resolve my problem!! Thanks.

Hello Jim,
If you want to uncompress a "index.xml.gz" file, try this way:
a) Copy the "index.xml.gz" file to your desktop, so you are not working with the original file.
b) Start from "Applications/Utilities" the program "Terminal".
c) In the terminal window, type: gunzip (with a space after it).
d) Grap the "index.xml.gz" file from the dektop and drop it over the terminal window.
e) Hit the return key.
Now you have a "index.xml" file, which you can open with a text editor.
To compress the file, do the following:
a) In the terminal window. type: gzip (with a space after it).
b) Grap the "index.xml" file from the dektop and drop it over the terminal window.
c) Hit the return key.
The file should be compressed.
To make the template readable for Pages, do the following:
a) Copy the original "index.xml.gz" file from the template package folder (not to the desktop) to have a backup.
b) Now copy the "index.xml.gz" file from the desktop (the one you have edited) to the template package folder and overwrite the original.
Please let us know, what you find out.
Frank.

Keeping fonts and images on forwarded mail

When I forward emails containing coloured fonts, images, etc. the script is turned into a standard black format and the images lost (can see this when the thread is returned to me). Mail doesn't seem to allow me to produce the interesting array of fonts etc that I receive either.
Am I missing something or can Mail 2.1.3 be updated in Tiger?
Thanks
David

David,
You might want to look at your Mail preferences. Under Composing/Responding see if that first box is checked off - I think that might be the answer to your question.
When you're composing messages, hit command T to bring up the font formatting window and you should be able to do everthing from there.
Hope this helps.
Ginni

Is there a way to create a report of topics with missing images?

If I move all images in a project to a different directory,
is there a way to print out which topics have missing images?
I would like to have all images in the HTMLHelp folder, since
this is the default folder that images are copied to when I insert
them from another source folder. If I move all images from my
"Images" folder to the HTMLHelp folder, is there a way to generate
a report that lists all topics with missing images?
Normally, I've been using the "Images" report to determine
which topics used that image before I moved them, but I'd like a
report that denotes which topics are missing images, period.
thanks in advance,
ChristyG

Hi ChristyG
As long as you only move the images within the RoboHelp
project, none should go missing!
Unfortunately, I don't believe you have an easy report at
your disposal that will advise which topics contain missing images.
Cheers... Rick

Field names Missing in the (Excel) Mail attachment

Hi ,
I am trying to send my ALV Grid Output as Excel Email attachment using the below code
The problem is that the field names are missing in the receivers Mail.
i.e
*Name*   *Emp Code*   * Branch*         "this is missing
abc         123                 ukp
I searched many threads but unable to find the solution for this.
Kindly suggest me regarding this issue.
loop at p_eadd.
    if p_eadd-low <> space.
      clear reclist.
      reclist-rec_type = 'U'. "Internet-adress
      reclist-receiver = p_eadd-low.
      reclist-express = 'X'.
      append reclist.
    endif.
endloop.
* endif.
* Send the document
call function 'SO_NEW_DOCUMENT_SEND_API1'
     exporting
          document_type              = 'RAW'
          document_data              = doc_chng
*         PUT_IN_OUTBOX              = 'X'
     tables
          object_content             = objcont
          receivers                  = reclist
     exceptions
          too_many_receivers         = 1
          document_not_sent          = 2
          operation_no_authorization = 4
          others                     = 99.
ld_aplstat = '4'.
case sy-subrc.
    when 0.
      loop at reclist.
        if reclist-receiver = space.
          name = reclist-rec_id.
        else.
          name = reclist-receiver.
        endif.
        if reclist-retrn_code = 0.
          write: / name, ': succesfully sent'.
        else.
          write: / name, ': error occured'.
        endif.
      endloop.
      ld_aplstat = '0'.
    when 1.
      write: / 'Too many receivers specified !'.
    when 2.
      write: / 'No receiver got the document !'.
    when 4.
      write: / 'Missing send authority !'.
    when others.
      write: / 'Unexpected error occured !'.
endcase.
*.Tell workflow to go on
clear ls_scma_event.
ls_scma_event-wf_event = cs_wf_events-finished.
ls_scma_event-wf_witem = wf_witem.
ls_scma_event-wf_okey = wf_okey.
call function 'KPEP_MONI_CLOSE_RECORD'
    exporting
      ls_key        = gs_key
      ls_scma_event = ls_scma_event
    changing
      ld_aplstat    = ld_aplstat
    exceptions
      no_id_given   = 1
      others        = 2.
call function 'SAP_CONVERT_TO_XLS_FORMAT'
      exporting
       i_field_seperator          = ' '
       i_line_header              = 'X'
        i_filename                 = p_file
*   I_APPL_KEEP                = ' '
      tables
        i_tab_sap_data             = it_final
* CHANGING
*   I_TAB_CONVERTED_DATA       =
     exceptions
       conversion_failed          = 1
*   OTHERS                     = 2
    if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
Thanks in Advance,
Mr. Ben

Hi Ben,
Follow the code below....
Your internal table it_final will have the attachment data. After you got the attachment data do the following
gc_ret TYPE c VALUE cl_abap_char_utilities=>cr_lf.
lt_attachment        TYPE TABLE OF solisti1 ,
gt_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0 WITH HEADER LINE,
CLEAR:gs_attach.                      <this will have your attachment, declare a structure which contains fields of your excel sheet>
<before this you have to copy all the fields from your final internal table which should be attached to email to gs_attach>
For attaching field names
    CONCATENATE gc_ret gs_attach INTO gs_attach.
    gs_attach = gs_attach+1.
    APPEND gs_attach TO gt_attach.
CLEAR:lt_attachment.
      lt_attachment[] = gt_attach[].
SORT lt_attachment .
      DELETE ADJACENT DUPLICATES FROM lt_attachment COMPARING ALL FIELDS.
      CLEAR gs_attach.
      CONCATENATE <field names >
      INTO gs_attach SEPARATED BY gc_tab.
      INSERT gs_attach INTO lt_attachment INDEX 1.
<field addition ends>
call function 'SO_NEW_DOCUMENT_SEND_API1'
     exporting
          document_type              = 'RAW'
          document_data              = doc_chng
        PUT_IN_OUTBOX              = 'X'
     tables
          object_content             = objcont
          receivers                  = reclist
        contents_bin               = lt_attachment
     exceptions
          too_many_receivers         = 1
          document_not_sent          = 2
          operation_no_authorization = 4
    if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
Regards,
Aravind.

How do I import a jpeg image into my mail signature so that it wont separate when it gets to the receiving email

How do I import a jpg image into my mail signature box so that it wont separate into an attachment when it gets to the receiving mail box. We have a company logo and when I send it to someone it does not show up under our address but rather as an attachment. How do I keep this from happening?

Hello
be sure to send your email into HTML format end be sure your corespondant read mail as HTML format
as you can not be sure of your coresspondant email setting , you can not be sure as your mail is read
Pierre

How do I add a hyperlink to an image in my Mail signature

In outlook I can simply add a URL to an image in a signature like in the image I've attached. When I try to add a link to an Image in Mail it changes the image to a blue underlined link. How do I add a hyperlink to an image in my Mail signature?

Hello,
http://allforces.com/2006/04/14/css-signatures/
http://timmargh.net/archive/2006/05/custom_css_signatures_in_mailapp.php

How do I insert an image in G-mail using firefox 6.0.1??

I am using g-mail in firefox browser 6.0.1. My operating system is win 7 64-bit. Question: how do I insert an image in g-mail??

Nevermind figured it all out once I walked away!

How to send image file through mail without any attachment

Plz tell me how to send image file through mail without any attachment ( i mean not converting that image into pdf or any format ) i want to send that text or image through mail .

Hi Sandeep,
I think you can setup the type of email in Shared office Settings in transaction S016.
There is an option called <Preset document classes>
You choose this pushbutton to branch to the maintenance screen for the document classes that are directly displayed to users in the Business Workplace for selection when they use the Create function. The name under which the documents are displayed can also be maintained.
http://help.sap.com/saphelp_nw70/helpdata/en/6c/69c30f418d11d1896e0000e8322d00/content.htm
Haven't tried it though.
Regards,
Siddhesh

The Case of the Missing Image

Go to this link:
http://fyiboerne.info/wcid.html
This page is a very simple HTML page which displays two
things: a "< GO BACK" link, which is visible and working
properly, and one jpg image (file name: wcid#2.jpg) which is not
visible.
I would love to know what is going on here.
Both the html page, and the lone image are in place on the
remote server; however, when I test the page on my testing server
it comes up blank as it does from the browser when online. I've
tried pop-up windows, a download to a pdf version of the .jpg....IT
IS ALWAYS BLANK. Moreover, I have purged the entire site and put it
back...dumped the html file and completely rebuilt it...tried
opening the pdf file and jpg file in Photoshop and Acrobat, where
the image always comes up. In Photoshop, I flattened the layers.
The image shows up in Dreamweaver, but fails to appear in a
preview (using Firefox and Safari), and fails to appear on the
Internet.
I included the source code for this link in the event anyone
can see a problem. The first source code appears on the page which
links to the page in question. The second source code is the code
from the page with the missing image.
THANKS!
HELP!

Removing the "#" character from the file name fixed the
problem. Thanks!

Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go.

IWeb site update problem-app missing images/files, but site is ok

I created and uploaded a web site to my .mac (yeah, MobileMe) and it displays just fine. I have visited it from a couple of different comps. The problem is that I want to add/update files/pages, but when I open iWeb, several of the images/audio files do not display: shows a x-through and a centered question mark. They are in the sites idisk folder and in the laptop's copy of the files. When I try to replace the missing images/files by dragging onto the iWeb drafting page the following message appears: "the file can't be used because you don't have access privileges, or because it contains no content or was corrupted."
I'm afraid to make any updates for fear of losing what is already published.
Extra info: have family pack and am switching between .mac accounts because iWeb published to the iDisk corresponding to the account/sub-account you are logged into (BIG pain in the ***! It should have a password protected account toggle like Panther used). I have double-checked that the files for this site are only in the one iDisk account (am redirecting my masked domain url to the .mac iDisk server-works great.
Any ideas?

The upgrade from '06 to '08 which changed the domain.sites to a domain.sites2 caused more confusion, disasters and lost web sites than the bug ridden introduction of '09.
I ended up rebuilding all my sites from new, blank domain files in '08 and the conversion to '09 went OK apart from '09's nasty habit of changing media file links.
Fortunately, I have very little QuickTime content and don't use the iWeb Photos, Albums Blog or Podcast templates.
Most iWeb built sites look pretty awful when users stick to the default page width. I start from a Blank, Black or white page and trash everything on it.
I use the "standard" 980 px page width and most, if not all, of the iWeb themes do not adapt to this.
This is why I constantly ask the question. "Do the iWeb developers actually build any websites with the application?".
Perhaps if they did, we would get more bug free releases and some of the features that "real life" users are requesting.

Missing images in E-mails on iphone4

Similar Messages

Maybe you are looking for