Missing *.inf driver for 2605dtn and windows 7 64 bit

missing *.inf driver for 2605dtn and windows 7 64 bit
I just piurchased a new HP laptop with windows 7 64 bit installed. I do not have any windows 7 disks.
Where do I obtain the necessary drivers for this printer?

HI RandyJohnson,
You do not need to download drivers for this product. Print drivers for your product are available within the Windows 7 operating system. Use Devices and Printers, formerly known as the Add Printer Wizard, to obtain the Windows 7 update. For more information, go to Install the Printer Driver through the Windows 7 Operating System (c02536257) (in English).
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

Partitioning drives for linux and windows 7

I want to know if there is a piece of software that is free that can partition my drives so that I can triple boot OSX lion, windows 7 (which is currently blocking...) Linux (ubuntu puredyne).
A little bit of guidance would be much apprieciated as I have already tried fixing the partition tables MBR in the terminal and ended up disabling windows.
I know how to reinstall windows but what software can partintion the drives for linux as a triple boot?
Thanks.

Well, this is possible using Disk Utility as well as the Linux formatter. However, to triple boot will require special software: The rEFInd Boot Manager - Roderick Smith.

External Drive for OSX and Windows

Dear all,
I read somwhere that it is possible to use an external HD which can be used as an intermediate for documents between a PowerMac and Windows 2000 computer.
The article suggested that when using the Disk Utility program of Apple, the Ext. HD should be erased using the MS-Dos modus. This I did. After that it mentioned that by clicking on the Partion tab, under the "Option" button MS-DOS file structure should be selected.
However my DU program says: "No Options Available".
I'm still using OS 10.3.9 and I will upgrade when OS 10.5 becomes available.
Question: Why is the "Options" button not available? If this is because of using 10.3.9 how can I bypass the option and make the Windows computer see the External HD as well?
Thanks for your input,
Hans.

For now, while you need 10.4.6 to select GUID partition table, you can still setup a drive with FAT32 partitions. Format it on Windows perhaps.
Disk Utility -> Partitions -> Options....
GPL/GUID for Intel Macs
APL for PowerPC
Master Record Block for Windows
With Intel Macs you can install and run Windows XP SP2, Vista, XP Pro.
Hans, right now is probably the best time to update the OS. Tiger 10.4.9 is as complete as possible probably and esp. for PPC Macs. I think it runs better than 10.3.9 did.
While 10.5 will offer something different and new, the best time to upgrade is not when it is released sometimes, but rather once it reaches 10.5.3+ (ie, a year from now or later). Play and test it but depend on it 100%? Usually there are needed changes to software and hardware to "catch up."
Right now Tiger DVD 10.4.6 are available. Apple felt it worth putting out newer DVDs.

External hard drive for Mac and Windows?

Hey all,
Is it possible to set up an external hard drive with a partition that has one side compatible with Mac and the other with Windows, similar to a Boot Camp setup on an internal drive? If so, how do I do that? Thanks for any advice you can give.

Rekishika:
Yes it is possible. Use Disk Utility from Leopard and partition the external drive to the desired space for each. Format one side with Mac HFS+ Journaled and the other with FAT32 (You can reformat the FAT32). You can also format both external partitions to FAT32 if you want Leopard and Windows to access (read and write)either one of them.
Axel F.

New external drive for mac and windows

Hello,
I am looking to buy a 500gb maxtor external drive. Partition it 250gb for winxp and 250gb for my imac. I am really looking to make these drives as backup drives. I currently have an old 250gb (not all used) formatted as os x entended. I use it for all my itunes, photos, movies... photoshop, you get the picture... I just want to drag and drop to that drive. The same for my windows.
Does this sound correct? Has anyone done it this way?
Another way, would be to have it formatted for windows and drop and drag into two different folders : win and imac. But then I will be losing the naming conventions from the os x? isn't that why and want to use os x extended?
Thanks for all ideas,
Charlie

Piece of cake!
For those who want to know:
usb connection to imac first. I started disk utility. Split the partition to two parts and formated only one partition as OS X extended. After done, copied my directories as a bkup.
usb connection to windows. I started computer management and saw that the usb disk had two partitions: the first was healthy but unknown. That was ok, I wanted the second partition to be NTFS and formated. Then copied my directories to that drive as well.
Connected back the imac and saw both partitions, imacbkup and winbkup. I forgot, just like what I do with the imac and winxp, I can see the c: drive via the mac.
Very cool and easy. Maxtor drives are very reliable and easy to use.
Thanks,
Charlie Cooperman
If anyone wants more detail info, you can email me at [email protected]

Tricky stuff: formating hard drive for Mac and Windows

Don't know how to format an external USB hard drive for these purposes:
#1. Store a bootable backup for my MacBook (Intel)
#2. Must be readable and writeable by both Mac OS 10.4 and WinXP (mainly for file storage)
Can I do 2 partitions, with Mac OS Extended (journal) + GUID to serve purpose #1, and MS-DOS + Master Boot Record to serve purpose #2? My research suggests no, it seems both volumes must use either GUID or MBR? Thanks

Hi,
I have two Western Digital external HDs with nearly exactly these specs.
Partitioned them with GUID partition scheme and have Partition 1 as bootable OSX clone and partition 2 with FAT32 for file storage/sharing between OSX and Windows.
So, what you want is what I have/use right now.
Regards
Stefan

Formatting external hard drive for MAC and Windows

I have an external hard drive that I would like to make compatible with BOTH Mac and Windows. I don't want to split it but is there any way that I can make it compatible to where I can use it back and forth between both? I have classes and use Photoshop on both systems and need to be able to read and write to the hard drive from each system. Please let me know if this is possible and how? Thanks

I have a 500GB external HDD which I had to format o Fat32 a while ago. I don't remember exactly how I did it, but I remember it was a pain in the *** and took forever (I was under Windows XP).
So short answer to your question is yes. It is possible and as the above person said, you need to format to Fat32. Long answer is it will take some time and effort. Here are a few links to help you get started:
http://www.ridgecrop.demon.co.uk/index.htm?fat32format.htm
http://macosx.com/forums/mac-os-x-system-mac-software/270038-format-new-hard-dis k-into-fat32.html
http://en.kioskea.net/faq/sujet-676-formatting-your-drive-with-fat32
I haven't tried any of these (I believe I formatted mine downloading a third party app), but you might be lucky. Good luck.

Formatting an external hard drive for Mac and Windows

Hello,
I just bought a brand new Seagate Expansion Desktop Drive (2TB) and am trying to work out how to format it. I want to move all my photos and movies to it from my laptop so i have more space. I have a Mac OS X 10.5.8 laptop but i also wanted to make sure it was compatible with other Windows computers in case i need to use it on someone else's PC.
I've read through a few posts over the net and i am getting confused as i'm not IT-intelligent at all. I've seen there are possibly 4 different format types.
Any help would be much appreciated.
Thank you!

Answered here: Formatting brand new external hard drive

Missing Ethernet driver for Z440 Workstation?

Hi there,
I just reinstalled this workstation with win 8.1 and used the driver recovery CD for installing drivers but there seems to be missing a driver for ethernet and windows doesnt reconize it either so...pretty annoying.
PCI\VEN_8086&DEV_15A0&SUBSYS_2129103C&REV_05\3&11583659&0&C8
I hope someone can help with this!
Kind regards,
Allan
This question was solved.
View Solution.

Hi, Allan:
You need this driver...first or second file as applicable.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23071

How to format an external drive for mac AND pc use

i want to format my external drive so i can use it on my mac and on pc's as well. i've gathered that the MS-DOS format is the way to go. my question is this: would this create any problems for my mac then?
can i partion one part for ms-dos and part for macos extended?
cheers
-j-

MS-DOS format (or FAT32) will be fine for both Mac and PC. However there is a 4GB file size limit with FAT32.
You could use a dual partition, however the HFS+ partition would not be readable by the PC unless you installed the third party MacDrive.
Look at this page for more information on a dual partition drive for Mac and Windows.
http://macosxhints.com/article.php?story=20030613121738812
iFelix

Itunes 8 "Drive for importing and burning CD/DVD are missing"

I downloaded ITUNES 8 two weeks ago and, like many, have been receiving this message since. THE REGISTRY SETTINGS USED BY THE ITUNES DRIVER FOR IMPORTING AND BURNING CD'S AND DVD'S ARE MISSING. Can anyone offer a fix/solution? (BTW...When I downloaded ITUNES 8, it also blew away QUICKTIME).

Take a look at this link
http://www.gearsoftware.com/wiki/index.php?title=CD/DVDdrives_disappear_after_installingiTunes
I was having the same problem...actually for the last year and I found this info last week and followed the info and now so far everything is good. I finally can burn a cd in itunes and all my cd,dvd and media drives are in place and working.
Hope this helps for some one.....

Best way to format my 16GB flash drive for Mac and PC transferring large power point files?

best way to format my 16GB flash drive for Mac and PC transferring large power point files?

format flash drive in Exfat for transferring files between Mac and Pc.
FORMAT TYPES
FAT32 (File Allocation Table)
Read/Write FAT32 from both native Windows and native Mac OS X.
Maximum file size: 4GB.
Maximum volume size: 2TB
You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
NTFS (Windows NT File System)
Read/Write NTFS from native Windows.
Read only NTFS from native Mac OS X
To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
AirPort Extreme (802.11n) and Time Capsule do not support NTFS
Maximum file size: 16 TB
Maximum volume size: 256TB
You can use this format if you routinely share a drive with multiple Windows systems.
HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
Read/Write HFS+ from native Mac OS X
Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
To Read HFS+ (but not Write) from Windows, Install HFSExplorer
Maximum file size: 8EiB
Maximum volume size: 8EiB
You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
EXFAT (FAT64)
Supported in Mac OS X only in 10.6.5 or later.
Not all Windows versions support exFAT.
exFAT (Extended File Allocation Table)
AirPort Extreme (802.11n) and Time Capsule do not support exFAT
Maximum file size: 16 EiB
Maximum volume size: 64 ZiB
You can use this format if it is supported by all computers with which you intend to share the drive. See "disadvantages" for details.

Satellite L500-1EN - Where to find drivers for XP and Windows 7?

To me are necessary the driver for L500-1en. On a site has not found. If it is fashionable to use the driver from other model write from what.
To me are necessary the driver on Windows XP, Windows 7.

Hello
I have a little bit searched on the Toshiba website and it seems that your model belongs to the PSLJTE series and therefore you can download all drivers for XP and Windows 7 here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Notebook > Satellite > Satellite L Series > Satellite L500 > PSLJTE
Check this!!!

CD different for Linux and Windows

I have in hand a very strange CD. This is an (old) CD with drivers for a Samsung printer. The CD has drivers for Linux and Windows. But if I mount the CD in Linux, I see only the Linux driver and if I access the CD from Windows, only the Windows drivers are seen. How they can do that ? How can I mount in Linux the CD in order to see the content seen from Windows ?

In Windows ( DIR D: )
Le volume dans le lecteur D s'appelle SAMSUNG_LBP
Le numéro de série du volume est C432-A954
Répertoire de D:\
28/02/2005 00:53 <REP> ACROBAT_READER
26/10/2004 06:11 740 AUTORUN.INF
28/02/2005 00:53 <REP> DATA
28/02/2005 00:53 <REP> ML-1610
28/02/2005 00:53 <REP> Manual
09/12/2004 03:55 11 219 SETUP.DAT
20/09/2004 07:29 270 336 SSAuto.Dll
17/09/2004 08:03 253 952 SSEtc.dll
22/09/2004 11:09 225 280 SSFcs.dll
12/03/2004 05:59 1 622 016 SSRes.dll
17/09/2004 08:04 155 648 SSTtp.dll
26/10/2004 05:42 307 200 Setup.exe
28/02/2005 00:54 <REP> USB
8 fichier(s) 2 846 391 octets
5 Rép(s) 0 octets libres
In linux (ls -l -F /mnt/cdrom)
total 44
dr-xr-xr-x 22 root root 4096 Feb 28 2005 Manual/
-r--r--r-- 1 root root 2555 Feb 28 2005 README.txt
-r-xr-xr-x 1 root root 51 Feb 28 2005 autorun*
dr-xr-xr-x 3 root root 2048 Feb 28 2005 bin/
dr-xr-xr-x 8 root root 2048 Feb 28 2005 cups/
dr-xr-xr-x 4 root root 2048 Feb 28 2005 data/
dr-xr-xr-x 3 root root 2048 Feb 28 2005 help/
-r--r--r-- 1 root root 8517 Feb 28 2005 icon.xpm
dr-xr-xr-x 9 root root 2048 Feb 28 2005 locale/
dr-xr-xr-x 2 root root 6144 Feb 28 2005 misc/
dr-xr-xr-x 3 root root 2048 Feb 28 2005 ppd/
dr-xr-xr-x 2 root root 2048 Feb 28 2005 scripts/
dr-xr-xr-x 4 root root 2048 Feb 28 2005 setup.data/
-r-xr-xr-x 1 root root 6603 Feb 28 2005 setup.sh*
ouput of isoinfo -d dev=dev/sr0 (in linux)
CD-ROM is in ISO 9660 format
System id: LINUX
Volume id: SAMSUNG_LBP
Volume set id:
Publisher id:
Data preparer id:
Application id: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR (C) 1993 E.YOUNGDALE (C) 1997 J.PEARSON/J.SCHILLING
Copyright File id:
Abstract File id:
Bibliographic File id:
Volume set size is: 1
Volume set sequence number is: 1
Logical block size is: 2048
Volume size is: 239152
Joliet with UCS level 3 found.
SUSP signatures version 1 found
Rock Ridge signatures version 1 found
Rock Ridge id 'RRIP_1991A'
If I use on Windows the Windows port of cdrtools; then these tools behave as in Linux, showing me the Linux contents. In Linux I can also mount -t udf and then I see:
total 32
-rw-r--r-- 1 root root 32768 Feb 28 2005 Desktop DB
-rw-r--r-- 1 root root 0 Feb 28 2005 Desktop DF
drwxr-xr-x 1 root root 22 Feb 28 2005 Manual/
This was for a Samsung ML-1610 B/W laser printer. This is crazy.
@lolilolicon That explain the result when I mount -t hfs. But the difference in Linux and Windows remain mysterious. How Windows "mount" the CD? I believed it was the equivalent of mount -t iso9660 in Linux but apparently, it is not.
Last edited by olive (2011-09-08 12:12:16)

How do I convert my Windows 7 Folder to an ISO image to burn to a USB, in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

How do I convert my Windows 7 Folder to an ISO image to burn to my USB Flash drive (16GB) in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

Sorry - confusing - My question has NOT been solved yet - can anyone help?

Missing *.inf driver for 2605dtn and windows 7 64 bit

Similar Messages

Maybe you are looking for