Missing Info Objects and Business Content in IDES ECC6 with BI7.0

Hi All,
I do not see most of info objects like 0COMP_CODE, 0BUS_AREA, 0RESP_PERS etc. and lot of objects missing in Business Content too.
I have IDES ECC6 with BI7.0.
Could someone please help me to retrieve those objects.
Thanks.

Hi Kishore,
Thanks for the info. I am little confused. I thought i had full BW in my ECC6. What is the difference between ECC6.0 with BW and ECC6.0 with BW/BI7.0? BI7.0 has all business contents in it?
The IDES software has BW/BI 7.0 in it. That is what the person whi gave me told me. How can i verify that?
I have some knowledge of BW and i am trying to learn this new BW 7.0 on my own. Since it does not have BI content how can i proceed to learn on my own.
Please help. Thanks.

Similar Messages

Missing Info Objects in Business Content

Hello,
the business content of our system has missing IO. For the Bank Analyzer there are missing 3 IO which are used for the cube etc.(IO are S20BPART,S21DFVAL, S40FTRAN).
For me is this problem new and I want to now if anybody has experience with this type of problem. On oss I could not find anything, so what could be the reason
Thanks
Henning

Hello Henning,
We had the same problem with BC 7.03. I guess it was support package 5. We had to open a customer message and got a corrected version which became part of the next support package.
Kind regards,
Stefan
PS: Of course it were different InfoObjects. In our case it was something related to Production Planning.

Error While Grouping the objects in Business Content

Hi BW Guru,
Have u any idea about the following Messages.
RSA1- Business Content -> Grouping ->Only necessary Object for the INFOCUBE (0SD_C03) in business content for install it is showing message like
1. InfoObject 0PDCEOBJ is not active in the system and is being deleted
2. InfoObject 0PDCEPOBJ is not active in the system and is being deleted
Any suggestion is appreciated.
Thnkx,
Debasish

hi,
check the availability of that info object in business content...then activate it and proceed..
Siddhu

Part 2: Flat files and Business Contents: Any issues with this scenario?

I will appreciate some clarification on the some points made in response to my previous post "Flat files and Business Contents: Any issues with this scenario?"
1.
" ...youd better analyze those cubes for data redundancy and presence of data youll never use. " I will appreciate some clarification on the type of analysis you are referring to. Examples will help.
2.
"If you want to combine several found IOs in your custom dataprovider, then again you must know (or figure out) relationships between these IOs." I will appreciate some clarification on the type of relationship you are referring to. Examples will help.
3.
I am a bit confused with "..include into ODS structure ALL fields required for the cube" but you also noted noted that "...except navigational attributes and chars and KFs that are going to be determined in TRs or URs."
If you exclude ALL these, haven't you excluded all the fields you included in the ODS structure?
4.
"Consider carefully the ODS key fields selection. Their combination should not allow data aggregation that you dont need."
I may be missing the point here, I understand that you need to select the fields which will form the unique ID for the records in the ODS under the Key Field (please correct me if I am wrong with the purpose of the Key Field), but I don't understand the discussion of "aggregation" in the context.
Thanks in advance

Hallo
I try to give some exaplanation based on the previous answer.
1. Data redundancy - make sure you do not store the same information. does not make sense to have data redundanty across you Data Warehouse. this is also a cost. just sotre the same information one time if you get all what you need.
2. whatwhever you build you dp, which consist of IO, you need to know with kind of relation (1:1 or 1:n - n:n and so on) exist between them. that will help you when you model you infoprovider. For example I would never pit togheter IO (n:m) in the same dimension if you expect an high number of cardinality. Sometime an IO can be an attribute of another one (depend on relation. For example
Business Partner and his Address. Usually you have a relation 1:1, in this case address is an attribute of BParten and store it in the Masterdata instead then DP
3. Sometime when you load from ODS to CUBE, you can fill some IO (which are in the infocube and not in the ODS)through ABAP routine in TR-Start Routine of Update Rule. Does not make sense to include these IO in the ODS as they are NULL or Blank (the deault value). This can happen when for example, you first load in the ODS (Price and Quantity) and then you calculate Sell price later (Price * Quantity). of course it could be doen also in the Bex. Depends on other factors (Performance - Loaidng -Sizing)
4. Make sure that the KEY definition of ODS is accordingly to the data otherwise you will aggregate the data and later maybe if you need the detail you miss it.
for example: customer - product - Distr Chan - Sell Price
if each Customer can buy each product for any Distrution Channel, then when you build your ODS(Customer - Product and Distribution must be KEY) otherwise (if you have only Customer - Product KEY for example) you will lose the details for Distribution Channel.
I hope eveyrhting is clear
Regards
Mike

Customeru2019s local objects and customer content

Hello Gurus,
what are customeru2019s local objects and customer content , please ?
Many thanks.

Custom objects can be defined as /BIC/Z*****
You have to contact SAP to get names space and you have to maintain it in BI system.. I don't have any idea how to configure and all.. but you can contact/Send a query to SAP. They will help and also provide you How to...!

Can we add an info object and its nav. attr in an aggregate together?

Hello
I am getting an error when I try to add 0MATERIAL and 0MATERIAL_OPROD_HIER in an aggregate at the same time. In the cube, both 0MATERIAL and its attr 0MATERIAL_0PROD_HIER sit in the same dimension. Therefore, when I try to create an aggregate and drag these chars in, they try to come into the same dimension here also.
1st scenario:
1. I add 0MATERIAL in the aggregate.
2. I try to add 0MATERIAL_0PROD_HIER in the aggreate, I get an error message ' Aggregation levels cannot be defined for 0MATERIAL_0PROD_HIER.
3. And it does not let me add this nav attr at all.
2nd scenario:
1. I first add 0MATERIAL_0PROD_HIER in the aggregate.
2. I try to add 0MATERIAL now.. I get the same error as above for 0MATERIAL this time.
3. But it lets me add 0MATERIAL inside.
4. Now, when I go its context menu (right click) and select aggregation as 'All Char Values' for 0MATERIAL, then the error goes away.
5. But after I activate and fill the aggregate, I have a look it again.. and now I only see 0MATERIAL and its nav attr which I added first has disappeared.
Why do the above 2 happen? And if I have an info object and its nav attr in ROWS in a query, and if I am not able to add both of them to the aggregate.. how can I improve the performance of the query?
Please advise.

Hi Srinivas
In your scenario, it is sufficient if you just add 0Material when you are creating the aggregate. Need not add the nvaigational attribute in the aggregate definition. The procedure you followed the first time is right i.e. Drag and drop 0material first.
The system does not allow you to add the nav attribute because it is not required. I say this because a navigational attribute added to your infoprovider is like (in terms of SQL) joining your infoprovider with your material master table. Navigational attribute's value is not physically stored in your cube. It is brought in during execution time in both list cube as well as in your query output.
Similarly when you execute your query with 0material as your aggregate, even if you add a filter or variable restriction on 0Material_prodHier your query WILL use the aggregate since 0material is referenced.
You can even check this in RSRT. Give your query name, and generate report first. Then click on Execute + Debug, Choose Display SQL/BIA Query and enter your selection and choose enter. You will see the SQL of your query and in the SQL select statement you will see that your aggregate table is chosen instead of your infocube. This aggregate table only will be read during your query execution in Bex as well.
I hope this helps.
Thanks.

What are Info objects and Info package

Hey guys
can anybody tell me What are Info objects and Info package
thanx
saif

hi Saif,
or you can directly using RSD1 to create infoobject characteristic.
help.sap.com may help you
http://help.sap.com/saphelp_nw04s/helpdata/en/fc/1251421705be30e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/23/054e3ce0f9fe3fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a637fe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a63b3e07211d2acb80000e829fbfe/frameset.htm
also
sap bw cookbook by Jude Lobo
http://www.sapgenie.com/sapgenie/docs/MySAP%20BW%20Cookbook%20Vol%201.pdf
http://www.sapgenie.com/sapgenie/docs/MySAP%20BW%20Cookbook%20Vol%202.pdf
hope this helps.

Error: Contract object and business agreement do not match

Dear Friends,
I get this error on the service order.
Contract object and business agreement do not match
Any assistance would be appreciated.
Thanks and regards,
Aershid

Thanks Experts...
Sany.

Business Content - Do not merge with Active version

Hi,
I am activating an infosource from BC, which in turn is activating many Info objects.
My problem is that we made some modification to the info objects, for example remove and add attributes etc..
Now it seems that when activating the BC info objects again it will merge the Active version with the BC version. Therefore, undoing most of the changes.
Is there away to leave the active info objects alone and only install the missing info objects ?
Thanks

Thank you for the prompt reply,
This is exactly what I am doing ,I select the active version ,, but I get the following message :
Object Info Object 0AMOUNT: Merge with the Content Version
The versions (A and D) of Info Object 0AMOUNT agree
I am only doing simulation. But I need to be sure that the info objects will not be merged with the extra attributes etc..
Thanks

Error While Installing IDES ECC6 with SQL Server 2005

Dear Experts,
I found an error while installing IDES ECC6 with SQL Server 2005. The error is raising at the stage of 17 of 24 processing the procedure of 195 of 197 (sap_z_set_permissions).
I have tried several times by configuring different type of activites but still i am facing the same problem at the same stage. Please help me in thig regard.
I herewith pasted hereunder log files information
Regards,
B.Sudharsan
ERROR 2008-01-17 18:38:47
FCO-00011 The step ExeProcs with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs was executed with status ERROR .
INFO 2008-01-17 18:40:05
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs".
ERROR 2008-01-17 18:38:47
MDB-05053 Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.

Sudarshan,
Occasionally, mid-way through the upgrade, DB permissions to users might change. Check to see, if the users SAP<SID>, OPS$ users have the DBA privilege. Re-assign the role and try continuing with the upgrade.

HowTo provide modifid Business Objects for Business Content Provider in MSY

Hallo,
we are currently working on Reports and hence do need to work with the BCP (Business Content Provider). We now come to the point, were we have issues and have to enhance the Data structure. According to the documentation the Busienss Objects (BO) is maintained in the MAS, but whatever I do I am not able to get the any modification visible in MSY. I only was able to see modification on the relationship tile in MSY, but nothing else.
I realized at least that only attributes are visible in MSY, which are actually assigend to an BDoc Segment field, so I have created my own Z_Attribute and assigend an existing segment field "ALT_ID". I did a generate all, performed an rebuild of the MSY (called in MAS as "Mobile System"), performed an ConnTrans and also did an "Reload Structure" in MSY, but nothing is going to change.
I went thru the help.sap.com Docu http://help.sap.com/saphelp_crm50/helpdata/en/fe/f34456d2672547be0efe4968913223/frameset.htm , but there is nothing that tells the general limitations & rules I have to consider unlike the MSA application. Questions like "Is the BCP based on the BO in MAS or more on the BDoc behind", "How the structure of the BCP is actually determind", ...
Did I missed anything?
Thank you for your help,
Andreas

Great howto Steve! This further increased my understanding of the MVC patterns used by BC4J.
Some remarks:
[*]Select New Business Components...
This should be 'New Business Components Package', or you won't be able to add business components.
ename as "Name",
sal as "Salary"
from emp
where empno = ?That should be deptno.
[*]Select the EditEmpsInDepartment view objectThat should be EmpsInDepartment.
Greetings,
Ivo

Missing datasources when installing Business Content

Hi All
We have a requirement for a number of SBC infoproviders (BI7/ECC6) which are new to us.
The majority we have installed successfully but we are having problems with 0SLL_C01 / C02 and C03 which relate to Customs and 0BVTSD02 which is a Telephones Sales Acitivity DSO from the Beverage Industries area.
We have 'successfully' installed all the data flows down to the infosource level but none of the datasources were installed.
On re-checking in our source system RSA5/RSA6 we realised there were no datasources available for these infosources.
How do you add business content datasources to your source system so they are available? or have we missed a process?
Thanks
Jerry

Hi Jerry,
The Datasource you are talking about is related to release of SAP GTS 3.0 pack.
So please check with you basis team whether they have installed this plug-in in your source system.
If these release /plug-in are not installed in your sourcce system you wont be able to finf it in the RSA5/RSA6.
Thanks and Regards
Arun

Usage of MDM's material master relevant XI Content and Business Content

Dear all,
In MDM's material-relevant XI content, there's a message interface "MDMMatmasIn". But in the demo system this interface is not used to write material master data to file. The IDoc type MATMAS.MATMAS05 is used instead. No mapping is used. May I ask why?
I tried the 00_MATMAS05_R3.map file and can import file in the format of MATMAS.MATMAS05. But some value mappings are not done and have to be added manually. Do I miss precedent steps?
In MDM Business content, there're lots of import map files like 00_MATMAS05_R3.map and 03b_Units_SAP_R3.map. During the data consolidation procedure, should we just use one map to import the IDoc-XML file? Shouldn't we first use other map file to fill the lookup tables? If not, what are those map files used for? Is there any document about the usage of those map files?
Very sorry for asking so many questions. I'm very new in this area and desperately need help...
Best Regards
Jerome

Hi Christiane,
Thanks for the document. But I didn't find how to import the customization data into the lookup tables. For example, in the MDM standard business content, the "Material" repository contains a lookup table "Material Type". It doesn't contain the values like "ROH" and "HAWA". How can we fill such tables?
And the standard map "00_MATMAS05_R3" doesn't automatically add such values into lookup table by value mapping. When I tried to import a material master, I had to manually modify this map. Is there any solution to this problem?
Best Regards
Jerome

Steps to correct transport that had missing info object

Experts,
I had tranpsorted Material Master data after enhancement and realized that I missed to add custom info object in transport (BW). This transport come with Error 8 in QA. Now, I have transported missing object to QA with new transport request. Mw trasport in R/3 and data source replication were good. Currently, Transfer structure and 0Material are inactive. I would like to know steps to correct my tranport best possible way. Can I do repair or reimport my first transport? Please advice. Thanks.
Regards,
NP

I will suggest to collect them again in a new request and transport.
Ravi Thothadri

Need info on CRM Business Content extraction

I'm working on extraction of Standad CRM Objects for reporting Telecom KPI's etc...plz help me with the best way forward.

Hi Nishant the link below summarizes your concer..
http://help.sap.com/bp_biv335/BI_EN/index.htm
Further look if the Business COntent are standard SAP business contents, then simply form an RFC connection between the BW(R/3) Server and CRM server.
Transport the objects to CRM Bus Content repository and then activate them for use as required for Object modelling.
You can form Telecom KPI based standard reports like Churn,Profitability etc from such objects..
Further refer to following links..
CRM business content
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0ec3252-f21c-2a10-3c8d-b9ef05f839ef
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0ec3252-f21c-2a10-3c8d-b9ef05f839ef
BW- CRM

Missing Info Objects and Business Content in IDES ECC6 with BI7.0

Similar Messages

Maybe you are looking for