Missing InfoObjects

Hi everybody,
I have just activated Business Content (IC 0FIGL_C01 including Dataflow before). When I go into RSA1 now, in the InfoObject view, I cannot find any of the InfoObjects that I have just activated. They arent in the NODESNOTCONNECTED-InfoArea and all the InfoAreas I have also activated are empty. But when I go into RSD1 I can change/view them (and also in the InfoSource tree in RSA1) so they DEFINITELY HAVE BEEN ACTIVATED but for some reason they are not displayed in the InfoObject view. Does anybody know about this problem?
Regards,
Martin

Hi,
I feel there is no help which says the requred IO catelogs to Activate any cube .
So when you need to activate any Cube ,see few info objects and check their Info object catelogs are in active or not.
Or
Activate usually used infoobject catelogs like all SD,MM,FI,PP Catelogs.
With rgds,
Anil Kumar Sharma .P

Similar Messages

Missing InfoObjects in Business Content for Higher Education & Research

Hello
According to the SAP documentation "[Guideline u2013 BW Content 3.53 and 7.03 for Student Lifecycle Management|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23]" there should be an InfoObject 0HE_EVPRST_TEXT. Unfortunately, I can't find it in the Business Content of my SAP BW.
Furthermore,...
- InfoObject 0HE_EVENT_ATTR has a different structure in the business content than mentioned in the documentation
...and...
- I can't find the DataSource 0HE_SLC_PI_1 in the business content although it's mentioned in the documentation.
I've already posted in Re: Transformation between DataSource 0HE_EVENT_ATTR and InfoObject 0HE_EVENT but nobody could help me there.
The BW version is SAPKW70022 and BI Content version is SAPK-70405INBICONT.
Can someone help me in this forum section? Thank you!

Hi Patrick,
For your 0HE_EVENT_ATTR question:
Please take a look at SAP note:
- 1296185 --> https://websmp230.sap-ag.de/sap(bD1ubCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1296185
- 1396684 --> https://websmp230.sap-ag.de/sap(bD1ubCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1396684
For your 0HE_SLC_PI_1 question:
Did you apply Ehp4 in your SAP SLcM system? If not then the Performance Indices extractors are not yet available in your system.
For your 0HE_EVPRST and TEXT question (related Processing Status for Academic Events Planning):
Did you apply Ehp3 in your SAP SLcM system? If not then the Processing Status for Academic Events Planning are not yet available in your system.
I hope this helps.
br,
Rob

Fields missing in Update rules

I am creating snap shot DSO for inventory management and after that i created the update rules for it linking it to the info source 2LIS_03_BX. When i do this i am missing the info objects that i created to include in the DSO. How do i solve this issue as those info objects are very important and i have to create the routines for it.
I have got the units for those fields and they are mapped but the info objects itself are missing.
Thanks for any help in advance
Naveen

HI Naveen,
Yes, you can include the missing infoobject in DSO. for that you need to follow bellow steps:
a). Delete the data from DSO.
b). you have to include the infoobject in DSO.
Double click on DSO>select chage mode->select keyfield /data field node--->right click select Infoobject Direct Input.
c). Activate the DSO
Brief Description about 2LIS_03_BX :
The 2LIS_03_BX is used to extract an opening stock balance on a detailed level (material, plant, storage location and so on). At this moment, the opening stock is the operative stock in the source system. "At this moment" is the point in time at which the statistical setup ran for infosource 2LIS_03_BX.Loading the opening stock balance InfoSource 2LIS_03_BX into data target.In the InfoPackage, choose the upload mode u201CCreate opening balanceu201D.
Regards,
Suman.

COPA datasource - Infoobject identification / automatic generation

Hi,
I have generated COPA data source in R/3, replicated in on BW side and now I'm trying to map fields to infoobjects (+undestand which ones are key fields for the staging DSO). Data source is deplicated as 7.0 one.
My planned flow is: data source -> write optimized DSO -> standard DSO -> Cube.
I have pdf on COPA extraction from sdn by SAP which says, that BW shoudl automatically either match or generate new Ifobojects for all fields that were direcly maintained in COPA - there should be en option application proposal
Here is the excerpt:
"InfoObjects are only created automatically for value fields and user-defined characteristics if the DataSource is mapped to an InfoSource using the source system view in the SAP BW Administrator Workbench. In this case, a dialog box appears in which you can choose Application Proposal. With this function, any missing InfoObjects are created for value fields, measure unit fields, and the user-defined characteristics described above when the InfoSource is generated."
I assume this si only when data source is 3.5 one? Does it mean that I need to create all infoobject myself (the ones for which I cannot identify business content) as I have 7.0 data source? Is there any benefit for using 7.0 data source?
Second question - are fields like VV001 Intercompany Price - caluclated in COPA? I have several fields that follow the patter VVxxx (xxx being a number) for which I cannot find corresponding content infoobjects.
Could you also give me corresponding infoobjects for fields PRABA (Price reduction - 0PRICE_RED?) and VRPRS
(Stick Value or CoGS - no ide here)?
Thanks in advance.
Edited by: Marcin Byra on Jan 6, 2010 4:35 PM

Hi Voodi,
I followed ur instructions and tried to create a transformation between 3.x infosource and 7.0 datasource. system prompted to create new infsource and copied all the infoobjects which were part of the 3.x standard infosource.
But still system does not propose any infoobjects for the value fields starting with VV* . In BW3.5 for all VV* fields, system used to propose infoobjects strating with 0GV*. Did u get system to propose these infoobjects?
Thanks for ur help

Inactive INfoobjects

Hi,
May I know how to find all the Inactive infoobjects of the BW system
Thank you
Savitha

to be more specific:
If your cube has been working well, there's must be a cube (at least in development system or Q-System) with all the InfoObjects - you can transport this data model into the system, where the InfoObject is missing. Of course, on this way you can transport the missing Info Object as well.
Normally there will be an inconsistent in the database caused of missing InfoObject. Adding a new field (missing InfoObject) means also, that you change the structure of the table. If you hold data of 1yr (which is large), it's better to save the data in a back-up table (via SQL-Script for example) and then delete all data in your data target before you do the transport. Then restore the data from the backup table. The problem is more, how you fill the new column (missing object). If it's a master data attribute - just reading from the correspodent master data table or convert from another Info Object. If it's a key figure it' more difficult and in this case you may have to reload the whole data from ECC.
However to identify a cube as a table in SQL-Language is complicated. This interview question sounds simple, there may be a simple answer which is not coming to my mind at the moment. Maybe I haven't understand the question correctly. I'd be interrested on another suggestions!

Objects not generated for co-pa characteristics

Hi all,
I want to transfer data from CO-PA to BW. I have created a Datasource using transaction KEB0. Then I have used the option "application proposal" to create the Infosource. After that I want to create transfer rules but some fields have no corresponding InfoObject. I thought the missing InfoObjects would be automatically generated fo copa fields (0G_CWWXXX for characteristics and 0G_AVVXXX for value fields) but the system only generated objects for value fields. I want the missing objects for the characteristics to be generated as well. What can I do?
Please assist.
Best regards,
Fabian.

Hi Fabian,
check for which fileds of CO PA infoobjects are not available, create infoobjects for those fileds with details available for each field.
ex. for particular field what is data type and length, create infoobject with same data type and length under CO PA infoobject Catalog and use same description and meaning full technical name and add those created fileds in Infosource and map at transfer structure.
Best Regards.

BI Content Installation issues due to compounding

Hi All,
I am on BW 7.4 and am facing some issues while trying to install a BI content cube.
One of the infoobjects of those cubes has a custom infoobject compounded to it and the BI content installation keeps on failing because the Delivered version of that cube doesnt have that compounded InfoObject.
For example 0COMP_CODE has ZXYZ added in compounding. Now I try to install a cube 0ABC having 0COMP_CODE.
System throws an error that cube 0ABC is missing infoobject ZXYZ and cannot be installed.
How do I get this cube to be installed so that I can manually put ZXYZ in it and activate? Please help.
Regards,
Shyam

Hi,
I think I am not clear on my question.
0COMP_CODE is already present. ZXYZ is already been created and is a custom IO.
ZXYZ had been added in compounding of 0COMP_CODE.
This means that whenever you use 0COMP_CODE in a cube/dso you will have to make sure that ZXYZ is also present. Or else that Infoprovider cannot be activated.
Now the problem is that when I try to install a BI content cube containing 0COMP_CODE system throws an error that ZXYZ is not part of the Infocube (obviously since it is a custom IO) and hence the entire cube installation fails.
Now my question is how do i get the cube to be installed at least in inactive state so that I can add ZXYZ to it and make it active.
Regards,
Shyam

Source system in Production doesnt exists Error RC- 8

Hello experts!
We connected a second source system to our 7.0 BW. We transported from development to quality system and everything is fine. Now we want to transport to production and we got RC=8 and the message that our "source system does not exist"
First we checked our source system. It is ok. we can replicate datasources, load units and currencies. But when we want to transport something what is directly connected to the source system we got everytime a RC=8 because of source system. For sure, we checked our "Conversion of logical source systems names". We checked if the mapping from development to productive is correct many times but we can find no error.
Is there something I can not see?
I tried to transport Transformations, DataSource Migration, other things connected to 7.0 and 3.x DataSources. Nothing works. I transported a transformation got a little different error like no rules exist because missing infoobjects in source or target or they are not activated. But target seems to be ok and source also have the fields.
Also I have searched the previous threads I have got what I have done but for sure some thing I am missing !!
Any Ideas???
Best regards,
Yash

Thanks Murali for your prompt reply,
I have manged to do the conversion settings again and now the source system client problem subsides !!!
But when I import the requests again from QA to PRD it says that some DS cannot be activated due to inconsistency in CRM production system. Actual message is.
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)
Mapping between data source 0CRM_SRV_CONTRACT_H and source system PC4CLNT400 is inconsistent
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Activation Mode)
InfoObject Source System of Preceding Doc. ( 0PRELOGSYS ) is not active, total of 4 inactive InfoObjects
InfoObject Exchange Rate Date ( 0CRM_EXCDAT ) is not active
InfoObject Exchange Rate Type ( 0CRM_EXCTYP ) is not active
InfoObject Quotation GUID ( 0CRM_QUOGUI ) is not active
InfoObject Source System of Preceding Doc. ( 0PRELOGSYS ) is not active
InfoObject Text of CO Document Line Item ( 0CO_ITEM_TX ) is not active
InfoObject Text of CO Document Line Item ( 0CO_ITEM_TX ) is not active
InfoObject Text of CO Document Line Item ( 0CO_ITEM_TX ) is not active
InfoObject Text of CO Document Line Item ( 0CO_ITEM_TX ) is not active
is that due to the DS .. some are in BI 7 cannot be mapped with 3.X ?
I will be importing a new request all the way from DEV to QA and Then in PRD as of now to see the inconsistency once again.
Cheers
Yash

Solution for Error Message RSAODS015 during transport

RSAODS015 "No fields were supplied
No details are provided for this error message
This usually means that certain InfoObjects are missing and required for the Transported Object to be activated.
example: Transporting an InfoSource may be incorrectly reported as successful even though certain InfoObjects do not exist on the target system and are required by the InfoSource. Later on if you transport an InfoPackage requiring these missing InfoOjects you will receive this error. So basically Transporting an InfoSource does not correctly report that there are missing InfoObjects.
Hope this helps.

Hi Kenneth ,
Possible reasons for this error may be :
1. all the objects are not properly collected in transports .
2.The sequence of transports should be proper ex -> infoobjects,cubes,Multiprovider,Query .
3.It may happen that any one of the object is not yet transported so higher level requests are getting failed .
Please check the object and there dependency with other objects.
Regards,
Jaya

Error in Update Rules

Hi All,
I am encountering the below error while activating the update rules of 0LIV_DS01
IC=0LIV_DS01 IS=2LIS_06_INV syntax error: The type "/BI0/OISR_SVP_LSY" is unknown
Please guide me.
Thanks.....

/BI0/OISR_SVP_LSY exist in your system? Maybe any transport is missing (InfoObject OISR_SVP_LSY)

Turning Business Content on a Test/QAS Box

I have turned on Business Content on our BW DEV box for CRM. Can I turn on the same Business Content on our BW QAS box and remap?
My issue is that the transports of the business content turned on for CRM in DEV Opportunities ODS, InfoCube, and Info Objects are giving me errors when I import to QAS regarding missing info objects that should be linked by business content when it was turned on.
Time crunch.

hi,
the 'normal' way is via transport.
please collect these missing infoobjects in BW Dev and transport to BW QAS.
you can use ods or infocube as starting point,
rsa1->transport connection->left panel choose 'object type' and middle panel choose infocube/ods and 'select objects' and 'transfer', it will go to right panel,
use collection mode 'manual' and grouping 'only necessary objects', execute. after objects collection finished, expand the infocube/ods, and make sure these missing objects are there and marked. create request and transport then transport again the previous error request.
hope this helps.

Business Content - 0COUNTRY_BRAZIL

Hello,
Please help me to activate the 0COUNTRY_BRAZIL from Business Content. In the ODS 0NF_DS07 the monitor was red and I could not proceed.
The messages were:
- Infoobject 0PBUS_AREA do not existe in the version A
- Infoobject 0ID_BUPLA do not existe in the version A
Should I create those missing infoobjects or there is another way?
Thanks & Regards,
Adriana

I´ve activated the infoobjects but when I go to Modelling -> Infoobjects and search for them I cannot find. Did I skip some step?
Thanks & Regards,
Adriana

Adding objects in transport request

Hi sdn,
by mistake I didn't include some infoobjects in the transport request, how i can add this missing infoobjects in my transport request
rubane

Hi Kamaljeet
thx for ur reply i had included two infoobjects one comes under object list of request and another comes under request itself by using transport connect what is the difference between these two.
rubane

2LIS_06_INV Isuue

Hi All!
I Activated TransferRule 0EO78DL1RVNBN8VL2HKFNSSPN4QLS4I9 from 0LIV_DS01.
(BCT Contents)
And I got these message.
Rule (target: 0GN_LOCATIO, group: 01 Standard Group): Syntax error in routine
Rule (target: 0PRODUCT, group: 01 Standard Group): Syntax error in routine
Rule (target: 0GN_VENDOR, group: 01 Standard Group): Syntax error in routine
Rule (target: 0GN_CAT_PUR, group: 01 Standard Group): Syntax error in routine
Rule (target: 0CALMONTH, group: 01 Standard Group): Syntax error in routine
Rule (target: 0BBP_BILITM, group: 01 Standard Group): Syntax error in routine
Rule (target: 0BBP_BILLCT, group: 01 Standard Group): Syntax error in routine
Rule (target: 0LIV_AUIRCT, group: 01 Standard Group): Syntax error in routine
Rule (target: 0LIV_IVDFCT, group: 01 Standard Group): Syntax error in routine
Rule (target: 0LIV_MNIVCT, group: 01 Standard Group): Syntax error in routine
Rule (target: 0LIV_VDERCT, group: 01 Standard Group): Syntax error in routine
Rule (target: 0LIV_AMDFPR, group: 01 Standard Group): Syntax error in routine
Rule (target: 0LIV_AMDFQT, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SR_IVVLC, group: 01 Standard Group): Syntax error in routine
I looked into 1 of these routine.
and found this message.
" E:Type "/BI0/OISR_SVP_LSY" is unknown "
And I searched from SDN below.
====================================
I am encountering the below error while activating the update rules of 0LIV_DS01
IC=0LIV_DS01 IS=2LIS_06_INV syntax error: The type "/BI0/OISR_SVP_LSY" is unknown
Please guide me.
Thanks.....
Oscar Romero
Posts: 1,449
Registered: 5/23/06
Forum Points: 2,794
   Re: Error in Update Rules
Posted: Feb 15, 2007 12:36 PM    in response to: kamal p           Reply
/BI0/OISR_SVP_LSY exist in your system? Maybe any transport is missing (InfoObject OISR_SVP_LSY)
====================================
but there is no OISR_SVP_LSY infoObject from our system BCT.
Does anybody knows what's could be happening?
Thanks in advance.
Best regards.

Hi,
    Just check whether the /BI0/OISR_SVP_LSY object exists/installed in your system. This kind of error comes when some object is not present in some table and if you are using the table (with /BI0/OISR_SVP_LSY as one field) in the routine. Or the infoobject itself doesnot exist in the system.
Just check the above mentioned points in your system.
REgards
Sunil

Multi Provider Changes - The Query cannot be executed

Hello,
I added a new characteristic to an existing multiprovider on which queries already exist.
I changed one of the existing queries adding that newly added characteristic.
Now the query cannot be executed. Please see the log...
I could successfully execute the query in RSRT....
Diagnosis
Characteristic 0BILL_TYPE is used in the Query Designer, but was deleted from the InfoProvider.
System response
The query cannot be executed.
Procedure
Characteristic 0BILL_TYPE is used in the query to be executed even though it was deleted from the InfoProvider. The problem can be solved by changing the query in the Query Designer. Here, you get a repair proposal, which removes the missing InfoObject from the query. Afterwards, check whether or not the query was defined correctly.
You can also delete the query.
Additional technical information:
IOBJNM = 0BILL_TYPE
ELTUID = Sell-In Qty
ELTTP = SEL
Notification Number BRAIN 407
Close
Any siggestions of how to adjust the multiprovider.
Thanks,
Vish

The check in query designer says that query is correct.
Only when I try to execute using the web it says that Char doesn't exist in infocube.
The query works fine in Analyzer & RSRT....I guess something got to do with the Browser or web..
Thanks,
Vish

Missing InfoObjects

Similar Messages

Maybe you are looking for