Missing information when Outlook user cancels a meeting

I've just switched over from Entourage to Mail and a client sent me a meeting request. iCal picked it up OK and I was able to see the meeting details and respond.
Today the meeting got cancelled. iCal pick up the meeting cancellation from Mail and deleted the event. However, there was a lot of other information in the meeting cancellation request file. My client had suggested other times and asked for responses. The only way I could see this information was by saving the ics file to disk and opening it in TextEdit.
Is there any way to get iCal to display the full contents of a cancelled meeting request rather than simply deleting the event?
Thanks,
Nigel

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Similar Messages

Missing information when an Outlook user cancel a meeting request

Hi all,
Pardon the cross-posting but I put this question up in the iCal discussion group and didn't get any responses. There seam to be a lot of iCal ics and Mail integration discussion here so I thougt I'd try my luck.
I've just switched over from Entourage to Mail and a client sent me a meeting request. iCal picked it up OK and I was able to see the meeting details, with comments, and respond through iCal.
Today the meeting got cancelled. iCal pick up the meeting cancellation from Mail and deleted the calendar event. However, there was a lot of other information in the meeting cancellation request file. My client had suggested other times and asked for responses. The only way I could see this information was by saving the ics file to disk and opening it in TextEdit.
Is there any way to get iCal to display the full contents of a cancelled meeting request rather than simply deleting the event?
Thanks,
Nigel

Hi Dineke,
You can contact your Exchange administrator to run the following command to check it:
Get-Mailbox –Identity yourname | Select Name, HiddenFromAddressListsEnabled
Or you can view your colleague’s Default Global Address List in OWA to check whether you are listed there or not.
Please check whether there is any transport rule or Outlook rule setting in your mailbox. Also change a new computer and create a new Outlook profile to have a try.
Best Regards,
Winnie Liang
TechNet Community Support

Cancel download method when the user cancel the download file

I have a method that download a file ("downloadLog_action()")when the user click over the comandlink component and the dialog box is opening to save the file, but how to know that the user canceled the download file to cancel all accions.
This is the code of the commandlink in the jspx page that call the method and pass one parameter:
<af:commandLink binding="#{ConsultaValidacion.commandLink1}"
id="commandLink1"
action="#{ConsultaValidacion.descargarLog_action}"
text="Log">
<f:param name="codInstitucion"
value="#{row.CodInstitucion}"
binding="#{ConsultaValidacion.codInstitucion}"
id="codInstitucion"/>
</af:commandLink>
This is the method to download the file:
HttpServletResponse response = (HttpServletResponse)fctx.getExternalContext().getResponse();
response.setContentType("application/x-download");
response.setHeader("Content-Disposition", "attachement; filename=\"Log_" +
codigoInstitucion + ".txt\"");
response.setContentLength((new Long(blob.getLength())).intValue());
//Streams de entrada y salida
InputStream is;
OutputStream out;
try {
//Obtenemos el stream de entrada el cual se lo extrae de la BD
is = blob.getInputStream();
//Obtenemos el stream de salida para el cliente
out = response.getOutputStream();
//Sección de código que me permite escribir los datos en el stream de salida
int size = (new Long(blob.getLength())).intValue();
byte[] buffer = new byte[size];
int length = -1;
while ((length = is.read(buffer)) != -1) {
out.write(buffer, 0, length);
//Cerramos los streams
out.flush();
is.close();
out.close();
*//Una vez descargado todo el LOG actualizamos el contador. HERE IS THE PROBLEM BECAUSE THE COUNTER IS UPDATING WHEN THE USER CANCEL THE DOWNLOAD!!! AND ITS WRONG*
row.setNumDescargaLog(new Number(num + 1));
//Guardamos los cambios
webRvc.getAppModuleWebRvc().getDBTransaction().commit();
//Request lifecyce understands that the response is completed and no further action needs to happen
fctx.responseComplete();
} catch (IOException e) {
e.printStackTrace();
webRvc.close("Consulta bitacoras validacion");
return null;
} catch (JboException ex) {
webRvc.getAppModuleWebRvc().getDBTransaction().rollback();
webRvc.close("Consulta bitacoras validacion");
return null;
This works fine.
The problem occurs when the user cancels the download, because all the sentences run including updating the counter downloads, the counter only to be updated only when the user chooses to save the file.

Hi.
The problem is when the user cancel the dowload I do not know how to capture the user's response.
How to capture the response?
if(cancelled) <------Is there a parameter to tell me this?
......<your cancel code>..... none
else
.....<your non-cancel code>...THE METHOD THAT DOWNLOAD THE FILE - "downloadLog_action()" and increment the counter
Thanks.

Missing links when different users open a file

I'll try to sum this up as best I can. All mentioned files (InDesign and linked assets) are on a server. Mac OSX 10.9.4, InDesign CC
Some colleagues and I access the same InDesign files from time to time, what we're noticing is that when one of us opens the file all is well, however when another user opens the file all of the links are missing. If I open the file and links are missing and I relink all instances, save and close, and then another user opens the file—all the links are missing on her machine. Has anyone dealt with this before?
Thanks,
Jamie

OH MY GOD TELL ME ABOUT IT! It's the source of my frustration with this new job. I come from a company where everyone knew production and best practices for sharing files over the network and this kind of thing never happened. And here no one knows how to do anything but think they have this awesome workflow. And no one knows how to use the software to it's fullest and make things so difficult. There's insane file duplication on multiple share points of my server and no one is willing to change the way they work. I've been here for 2 months and like every day i find something else that they do inefficiently and refuse to change.
Back to the issue. I did some troubleshooting and found that when I packaged a file locally, then copied that package to the server that's when the links break because the indd file is still pointing to the local package folder. I'm so used to packaging to the server that i didn't think of that possibility.
Thanks for your input! Other than their nightmare file management, this new place is great though (not that that matters with this post...just saying)

Missing information when updating invoice line

Dear all,
I am updating invoice line information but system giving and error
declare
begin
for rec in (select l.*
from ap_invoices_all l
where invoice_num = 'akp/445'
and vendor_id = 1068
and org_id = 82) loop
AP_INVOICES_PKG.Update_Row(X_Rowid => 'AABDoVAGSAACZlRAAM',
X_Invoice_Id => rec.invoice_id,
X_Last_Update_Date => rec.last_update_date,
X_Last_Updated_By => rec.last_updated_by,
X_Vendor_Id => rec.vendor_id,
X_Invoice_Num => rec.invoice_num,
X_Invoice_Amount => rec.invoice_amount,
X_Vendor_Site_Id => rec.vendor_site_id,
X_Amount_Paid => rec.amount_paid,
X_Discount_Amount_Taken => rec.discount_amount_taken,
X_Invoice_Date => sysdate,--rec.invoice_date+30,
X_Source => rec.source,
X_Invoice_Type_Lookup_Code => rec.invoice_type_lookup_code,
X_Description => rec.description,
X_Batch_Id => rec.batch_id,
X_Amt_Applicable_To_Discount => rec.amount_applicable_to_discount,
X_Terms_Id => rec.terms_id,
X_Terms_Date => rec.terms_date,
X_Goods_Received_Date => rec.goods_received_date,
X_Invoice_Received_Date => rec.invoice_received_date,
X_Voucher_Num => rec.voucher_num,
X_Approved_Amount => rec.approved_amount,
X_Approval_Status => rec.approval_status,
X_Approval_Description => rec.approval_description,
X_Pay_Group_Lookup_Code => rec.pay_group_lookup_code,
X_Set_Of_Books_Id => rec.set_of_books_id,
X_Accts_Pay_CCId => rec.accts_pay_code_combination_id,
X_Recurring_Payment_Id => rec.recurring_payment_id,
X_Invoice_Currency_Code => rec.invoice_currency_code,
X_Payment_Currency_Code => rec.payment_currency_code,
X_Exchange_Rate => rec.exchange_rate,
X_Payment_Amount_Total => rec.payment_amount_total,
X_Payment_Status_Flag => rec.payment_status_flag,
X_Posting_Status => rec.posting_status,
X_Authorized_By => rec.authorized_by,
X_Attribute_Category => rec.attribute_category,
X_Attribute1 => rec.attribute1,
X_Attribute2 => rec.attribute2,
X_Attribute3 => rec.attribute3,
X_Attribute4 => rec.attribute4,
X_Attribute5 => rec.attribute5,
X_Vendor_Prepay_Amount => rec.vendor_prepay_amount,
X_Base_Amount => rec.base_amount,
X_Exchange_Rate_Type => rec.exchange_rate_type,
X_Exchange_Date => rec.exchange_date,
X_Payment_Cross_Rate => rec.payment_cross_rate,
X_Payment_Cross_Rate_Type => rec.payment_cross_rate_type,
X_Payment_Cross_Rate_Date => rec.payment_cross_rate_date,
X_Pay_Curr_Invoice_Amount => rec.pay_curr_invoice_amount,
X_Last_Update_Login => rec.last_update_login,
X_Original_Prepayment_Amount => rec.original_prepayment_amount,
X_Earliest_Settlement_Date => rec.earliest_settlement_date,
X_Attribute11 => rec.attribute11,
X_Attribute12 => rec.attribute12,
X_Attribute13 => rec.attribute13,
X_Attribute14 => rec.attribute14,
X_Attribute6 => rec.attribute6,
X_Attribute7 => rec.attribute7,
X_Attribute8 => rec.attribute8,
X_Attribute9 => rec.attribute9,
X_Attribute10 => rec.attribute10,
X_Attribute15 => rec.attribute15,
X_Cancelled_Date => rec.cancelled_date,
X_Cancelled_By => rec.cancelled_by,
X_Cancelled_Amount => rec.cancelled_amount,
X_Temp_Cancelled_Amount => rec.temp_cancelled_amount,
X_Exclusive_Payment_Flag => rec.exclusive_payment_flag,
X_Po_Header_Id => rec.po_header_id,
X_Doc_Sequence_Id => rec.doc_sequence_id,
X_Doc_Sequence_Value => rec.doc_sequence_value,
X_Doc_Category_Code => rec.doc_category_code,
X_Expenditure_Item_Date => rec.expenditure_item_date,
X_Expenditure_Organization_Id => rec.expenditure_organization_id,
X_Expenditure_Type => rec.expenditure_type,
X_Pa_Default_Dist_Ccid => rec.pa_default_dist_ccid,
X_Pa_Quantity => rec.pa_quantity,
X_Project_Id => rec.project_id,
X_Task_Id => rec.task_id,
X_Awt_Flag => rec.awt_flag,
X_Awt_Group_Id => rec.awt_group_id,
X_Pay_Awt_Group_Id => rec.pay_awt_group_id,
X_Reference_1 => rec.reference_1,
X_Reference_2 => rec.reference_2,
X_Org_Id => rec.org_id,
X_global_attribute_category => NULL,
X_global_attribute1 => NULL,
X_global_attribute2 => NULL,
X_global_attribute3 => NULL,
X_global_attribute4 => NULL,
X_global_attribute5 => NULL,
X_global_attribute6 => NULL,
X_global_attribute7 => NULL,
X_global_attribute8 => NULL,
X_global_attribute9 => NULL,
X_global_attribute10 => NULL,
X_global_attribute11 => NULL,
X_global_attribute12 => NULL,
X_global_attribute13 => NULL,
X_global_attribute14 => NULL,
X_global_attribute15 => NULL,
X_global_attribute16 => NULL,
X_global_attribute17 => NULL,
X_global_attribute18 => NULL,
X_global_attribute19 => NULL,
X_global_attribute20 => NULL,
X_calling_sequence => null,
X_gl_date => rec.gl_date,
X_award_Id => rec.award_id,
X_approval_iteration => rec.approval_iteration,
X_approval_ready_flag => rec.approval_ready_flag,
X_wfapproval_status => rec.wfapproval_status,
X_requester_id => rec.requester_id,
X_quick_credit => rec.quick_credit,
X_credited_invoice_id => NULL,
X_distribution_set_id => NULL,
X_FORCE_REVALIDATION_FLAG => NULL,
X_CONTROL_AMOUNT => NULL,
X_TAX_RELATED_INVOICE_ID => NULL,
X_TRX_BUSINESS_CATEGORY => NULL,
X_USER_DEFINED_FISC_CLASS => NULL,
X_TAXATION_COUNTRY => NULL,
X_DOCUMENT_SUB_TYPE => NULL,
X_SUPPLIER_TAX_INVOICE_NUMBER => NULL,
X_SUPPLIER_TAX_INVOICE_DATE => NULL,
X_SUPPLIER_TAX_EXCHANGE_RATE => NULL,
X_TAX_INVOICE_RECORDING_DATE => NULL,
X_TAX_INVOICE_INTERNAL_SEQ => NULL, -- bug 8912305: modify
X_QUICK_PO_HEADER_ID => NULL,
x_PAYMENT_METHOD_CODE => rec.payment_method_code,
x_PAYMENT_REASON_CODE => null,
X_PAYMENT_REASON_COMMENTS => null,
x_UNIQUE_REMITTANCE_IDENTIFIER => null,
x_URI_CHECK_DIGIT => null,
x_BANK_CHARGE_BEARER => null,
x_DELIVERY_CHANNEL_CODE => null,
x_SETTLEMENT_PRIORITY => null,
x_NET_OF_RETAINAGE_FLAG => null,
x_RELEASE_AMOUNT_NET_OF_TAX => null,
x_PORT_OF_ENTRY_CODE => null,
x_external_bank_account_id => null,
x_party_id => null,
x_party_site_id => null,
x_disc_is_inv_less_tax_flag => null,
x_exclude_freight_from_disc => null,
x_remit_msg1 => null,
x_remit_msg2 => null,
x_remit_msg3 => null,
x_remit_to_supplier_name => null,
x_remit_to_supplier_id => null,
x_remit_to_supplier_site => null,
x_remit_to_supplier_site_id => null,
x_relationship_id => null,
x_original_invoice_amount => null,
x_dispute_reason => null);
commit;
end loop;
exception
when others then
dbms_output.put_line(sqlerrm);
end;
ORA-20001: APP-SQLAP-10000: ORA-01403: no data found occurred in
AP_INVOICES_PKG.UPDATE_ROW<-
with parameters (X_Rowid = AABDoVAGSAACZlRAAM, X_invoice_id = 180867)
while performing the following operation:

Hi;
Please review:
R12: Validate Invoice Errors APP-SQLAP-10000, ORA-01403 and ORA-20001 [ID 1308869.1]
R12: Master Note: Consolidated Error Notes Of EBTax Related Issues In Oracle Payables [ID 1378068.1]
By the way If you make search at metalink such as APP-SQLAP-10000: ORA-01403: ORA-20001 there are 38 doc avaliable, please review them
Regard
Helios

Display text as information when a user runs a package via Excel

Hi,
Is it possible to add text to the pop up window a user gets when running a package via the epm add-in? Ideally as per the attached screenshot.
Thanks,
Arnold

Hi Vadim,
I tried PROMPT(MESSAGE,[label]) but I could see only 3 lines text. how to make it scroll enable for all the test.
I am using EPM ADDIN SP17 AND Office 213.
Regards,
Andrew.

Missing information when creating a PDF!

Hi,
We have InDesign CS4, and I recently produced a presentation for a Client. On particular pages, I placed a jpg. of an aerial map. I then drew using the pencil tool a shape, highlighting an area on the map. I filled the shape in red and then set a transparency at 80%. This all looked fine on screen, especially when I printed hard copies out.
However, when I created a PDF of the InDesign presentation, some of the shapes did not PDF!? I don't understand why some did, and some didn't!? To get the presentation ready, I decided to create a simple elliptical shape filled in red. This didn't print out either!?
Can anyone help with this query, as it is baffling me!
Thanks,
Ajay

What PDF settings are you using? Have you tried following the directions here: Remove minor corruption by exporting

ME9F : no update message 'NEU' when user cancel the printing

I use transaction ME9F and when the user click on the button Output message, a specific program is called.
A popup is displaying in order to display a choice for the user. He can choose print Original document or Copy and he can also cancel the printing.
But when he cancel the printing the message NEU is OK (green cross) but the PO is not printed.
Do you a solution for not changing the message NEU when the user cancel the printing.
Thanks for your help.
Best regards.

Hi ,
u need to check ur driver program , if its standard SAP , then u need to change driver program.
Regards
Peram

Outlook 2010 - Cannot cancel a meeting as the organizer.

On Outlook 2010 I do not have a 'Cancel Meeting' option. I can delete a meeting but the only option is to notify the organizer... but I am the meeting organizer. I need to be able to cancel a meeting and notify all of the attendees. I currently do
not have (or cannot find) this option!

This happens after activesync. If you disable activesync for problematic user's mailbox, calendar didn't change meeting organizer (cancel, update meeting buttons).
I found that - after meeting organizers mobile phone (nokia) synchronization,
some values of meeting organizer was changed.
You can look and compare organizer values (before and after sync)here:
Kareldev - MSFT
Microsoft
MSFT
40 Points 4 0
0
Recent Achievements
Forums Answerer I First Marked Answer
First Answer Confirmed
Kareldev - MSFT's threads
View Profile
Microsoft
(MSFT)
40 Points
1
Vote As Helpful
rgould5,
There are three MAPI properties that Exchange clients can key off of for determining organizer information. Here’s a quick summary
of what they are with details on how to inspect them using the MFCMAPI tool mentioned by Ripu:
1.
For meeting requests, a Recipient table exists showing each attendee. The organizer is represented here when PR_Recipient_Flags = 3
2.
PR_ Sent_Representing_Email_Address and/or PR_Sender_Email_Address
3.
named prop0x8217 dispidapptstateflags [can also show up as MessageStatus]
if the value is 1 = olMeeting it means you’re the organizer
if the value is 3 = olMeetingRecieved it means you received the item so you can’t possibly be the organizer
In your situation, the organizer seems to be modified on the calendar item in all three users’ mailboxes at the same time. This
usually means an application that has privileges to each mailbox is the culprit. Generally, if ActiveSync or an ActiveSync device is contributing to the problem, only the mobile device user’s calendar item would be affected.
The best approach is to inspect which organizer attributes are changed on each person’s calendar item. Then, with careful repro steps, see if
you can identify the user or service account that is making the changes. Take a look at the examples below:
Here’s the details of what Recipient Table looks like [requires MFCMAPI available
http://mfcmapi.codeplex.com from a PC with Outlook]. This isn’t a user friendly tool, but it’s very helpful in identifying what’s changed.
When you first launch the tool, select the menu item
Session, Logon and Display Store Table.
Now select an Outlook profile to login with
If you see
Mailbox - <username> in the list of display names you’re doing good. Double-click this to launch the next window.
In this window, drill into the mailbox
MFCMAPI Recipient Table
-To find the appointment you’re troubleshooting, go to the calendar folder underneath IPM_SUBTREE. Sorting by Subject will usually help get to
item quickest.  Select the item, and Action Menu(?) / and Display Attachment table.   You will see a list of recipients in a new window.  There should be a "3" in the PR-RECIPIENTS_FLAGS columb for the organizer.
- A healthy recipient table - the PR_RECIPIENT_FLAGS indicates whether a recipient is the organizer, or an attendee [this column is actually all the
way to the right ]. When the PR_RECIPIENT_FLAGS = 3, that indicates the organizer. For example, if the delegate organized a meeting with the manager and E2k7 Native being the required attendees. PR_Recipient_Flag should be 3 for the Delegate.
If not, then the calender item was modified by something.
- Going back to the calender item,
PR_SENDER_EMAIL shows Distinguished Name (DN) of the sender.
- Ok. Back on the calender item, if the organizer is listed as wrong person, look to see the last person to modify the item.  Here’s
where you can find out what account last modified the calendar item.   Look at the Column "Property Names" for row PR_Last_Modifier_Name. This is the account that last modified the item and is probably the culprit.
I hope this helps!

Mail Meeting Request Sent But Outlook User Can't Accept

Are there any tricks around this? I'm using my companies POP system and I get and can accept Outlook meeting requests just fine. However, when I send a new meeting request, there is only an atm attachment and no way to accept the meeting.
Any ideas, tips or tricks?
Thanks!
Mark

I'm a former Palm Treo user for years, syncing with Palm desktop on my PC, and have several thousand appointments with notes on my Palm, as well as over 1000 contacts. I just switched to the i-phone 3GS, moved all my data from the palm over to Outlook 2003, synced after much heartache and difficulty, then moved all this data to the i-phone via i-tunes. As a first time user, the usefulness of the built-in calendar app. is weak, and when you have multiple overlapping appointments, it's very difficult to see these appointments in an easy visual field. In addition, there's no way to search for any content within the appointments other than by the particular day. Nor can you see the year view on the calendar.
Does any former Palm of Blackberry business user have another Calendar application suggestion for the 3GS or 3G that will sync with Outlook 2003, or better yet with Mobile Me? If you move to a different app for calendar, syncing with multiple machines or Mobile me is a problem, from what Apple tech support tells me.
Thanks.

Missing Field error when modifying user Master Record

We are using our corporate LDAP to authenticate our portal users and do not have (nor do we want) write permission to the LDAP. We are using additional attributes (ume.admin.addattrs) to hold information pertinent to the portal. We are running into a problem though when required information is missing from the LDAP user master record. For example, if the users email address is missing, when we attempt to save a user's record with the additional attributes we need, the system responds with a "Missing Field" error message and will not save the additional attribute until the LDAP record is complete. Currently the only work around to this problem is to notify the LDAP administrators and have them update the record (not a high priority for them).
Is there a way to have the portal ignore incomplete records and just save what it has?
Thanks
Ken Burd

We are using our corporate LDAP to authenticate our portal users and do not have (nor do we want) write permission to the LDAP. We are using additional attributes (ume.admin.addattrs) to hold information pertinent to the portal. We are running into a problem though when required information is missing from the LDAP user master record. For example, if the users email address is missing, when we attempt to save a user's record with the additional attributes we need, the system responds with a "Missing Field" error message and will not save the additional attribute until the LDAP record is complete. Currently the only work around to this problem is to notify the LDAP administrators and have them update the record (not a high priority for them).
Is there a way to have the portal ignore incomplete records and just save what it has?
Thanks
Ken Burd

Failing to create an email with outlook interop when outlook has been opened by another user account

Hello
I have an addin that customizes the excel ribbon. I added a button so that when the user clicks it, a new outlook message windows pops up with some default information on the email body, CCs, etc.
The problem is that if outlook is already running and it's running under another user account different from the one that was used to open excel (e.g. after opening excel i open outlook with shift + right click and then "Run As..."); i get an exception upon
instantiating the outlook interop object:
Microsoft.Office.Interop.Outlook.Application app = new Microsoft.Office.Interop.Outlook.Application();
The exception message reads:
Retrieving the COM class factory for component with CLSID {0006F03A-0000-0000-C000-000000000046} failed due to the following error: 80080005 Server execution failed (Exception from HRESULT: 0x80080005 (CO_E_SERVER_EXEC_FAILURE)).
What can i do to prevent this issue from happening?
Thanks

In that situation I would test first for an existing Outlook process running and hook into it if it is running. If it's not running then I'd use new to create an Outlook session. There can only be one Outlook session running
at a time.
This sort of code will do the trick for you I think:
System.Diagnostics.Process[] processes = System.Diagnostics.Process.GetProcessesByName("OUTLOOK");
int collCount = processes.Length;
if (collCount != 0)
// Outlook already running, hook into the Outlook instance
outlookApp = Marshal.GetActiveObject("Outlook.Application")
as Outlook.Application;
An else there would create a new Outlook.Application object.
Ken Slovak
MVP - Outlook
http://www.slovaktech.com
Author: Professional Programming Outlook 2007
"wildarmss" <=?utf-8?B?d2lsZGFybXNz?=> wrote in message
news:870d6093-a7fb-4431-a38f-1896ce4cf963...
Hello
I have an addin that customizes the excel ribbon. I added a button so that when the user clicks it, a new outlook message windows pops up with some default information on the email body, CCs, etc.
The problem is that if outlook is already running and it's running under another user account different from the one that was used to open excel (e.g. after opening excel i open outlook with shift + right click and then "Run As..."); i get an exception upon
instantiating the outlook interop object:
Microsoft.Office.Interop.Outlook.Application app = new Microsoft.Office.Interop.Outlook.Application();
The exception message reads:
Retrieving the COM class factory for component with CLSID {0006F03A-0000-0000-C000-000000000046} failed due to the following error: 80080005 Server execution failed (Exception from HRESULT: 0x80080005 (CO_E_SERVER_EXEC_FAILURE)).
What can i do to prevent this issue from happening?
Thanks
Ken Slovak MVP - Outlook

A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. 1st gen iPad.

A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. The message is now fixed & I cannot get rid of it. Ironically, when I found this forum I was able to set up an apple Id. Please advise how to get rid of the pop-up box. Thanks!

I'm having this same problem as well and cannot advance--very irritating. All of the information is filled out correctly and I've editted my AppleID information online separately as well to get around this issue, but no luck...

How to remove save, cancel option when end user runs the workbook in Portal

Hi,
how to remove save, cancel option when end user runs the workbook and make some small changes like using page items or increasing rows and columns
I already made 2 changes
1) I removed the option in Oracle Enterprise Manager under discoverer viewer of saving
2) I also removed the option of Allow saving changes made in Viewer when adding workbook to portal
But still the end user gets options of saving when made small changes to workbook like increasing rows and columns
Is their any place, I need to make changes?
Thanks in Advance
Rowdheer

Don't use JSP to serve a binary file. It almost implies the use of awful scriptlets and the invocation of both the response writer and the response outputstream which would only lead to IllegalStateException headaches in the server logs.
Use a Servlet instead. Specify the file name as request parameter and let the servlet read the file and write it to the outputstream of the response.

When syncing my iphone i get a msg, "itunes could not sync calendars to the iphone because an error occurred while merging data" I sync my calendar to outlook. My iphone calendar has all and the most updated information. Outlook shows only recurringMY

I'm at a loss as to what to do. Any help is appreciated. When syncing my iphone I get an message, "itunes could not sync calendars to the iphone because an error ocurred while merging data" I sync my calendar to outlook. My iphone calendar has all and the most updated information. Outlook calendar only shows my recurring events.

hi there,
i've found a great & simple solution for this problem
just open your iCloud acc on iPhone
turn off calendars (it wil ask you to keep info or not - KEEP IT!)
and turn back on (MERGE!)
now SYNC it..
and that's it
PS in my case it was contacts so the procedure is the same..

Missing information when Outlook user cancels a meeting

Similar Messages

Maybe you are looking for