Missing Infosource 8*

Hi.
I cannot see the infosource 8* but I already activated
the object generated (in the rsa1 crtl+f3.)
somebody know how.
thanks
Rodrigo Araya

Hi:
Did you try what Ann said.
<i>Under the menu "Settings" in RSA1, click on the option "Display generated objects" and then select the radio button for "show generated ODS objects"...</i>
If that 8InfoSOurce belongs to an InfoObject, you cannot see it. You just have to assign it and it shows up.
See if your InfoSOurce is available in RSA6 (in BW)
Ram C.

Similar Messages

Problems with Transfer Rules

I have the following message when I try to open a transfer rule
Transfer Rules 2LIS_03_S642_BB are Missing
InfoSource Extraction using 2LIS_03_S642
Cannot Restore
You Now Have to Recreate All Rules with Changes
Do You Want to Create this Identifier Now?
If I say yes it does not allow me to since it asks me to specify a transport which I do but it cannot recognise. Does anyone have a solution? I have run the programs RSAR_TRANSTRUCTURE_CHECK and RS_TRANSTRU_ACTIVATE_ALL which makes no difference. Thanks

hi Niten,
possible your infosource assigned with datasource that source system not exist anymore ?
if no own created routines in transfer rules, perhaps try to activate again from business content infosource 2LIS_03_S642 with dataflow before ?
hope this helps.

Missing Datamarts in the Infosource Screen

Hi,
I needed to experiment loading from an infocube to another infocube for some re-modeling to be done at the clients side. The problem I am facing is none of the datamart datasources are showing up on the infosources tab. They appear under the BWSystem in the source system tab but cant see them under infosources tab.
I have tried all solutions that I am aware of like Settings -->Display Generated Objects / Select Display Options etc. I find entries in the ROOSOURCE table on the BW side too but cant see it on screen.
Anybody faced a similar problem? I don't know if it has anything to do with transferring application component hierarchy from R/3. That was not done when the initial implementation was done and I have done that too and replicated on the BW side. I am still missing the whole Data Marts Application Component in the infosource tab.
Any ideas anybody? Am I missing something major here??!!Thanks in advance.

hi,
in 'old day' we solved this problem with oss note 142947-Data Marts application component missing
Symptom
After the meta data upload export InfoSources are not displayed in the InfoSource tree.
Additional key words
Application component
Cause and prerequisites
The entry for the component 'Data Marts' is missing in the BW management for the InfoSource hierarchy.
Solution
Maintain the following table entries in table RSAPPL of the target BW using Transaction SE16:
1. APPLNM      DM   APPLNM P   APPLNM C    DM-IO   APPLNM N    NODESNOTCONNECTED   RELEASE     40B   TXTSH       Data Marts   TXTMD       Data Marts   TXTLG       Data Marts
2. APPLNM      DM-IO   APPLNM P    DM   APPLNM C   APPLNM N   RELEASE     40B   TXTSH       Master data DM   TXTMD       Master data Data Marts   TXTLG       Master data Data Marts
In addition, change the entry APPLNM = SAP R/3 as follows:
APPLNM      SAP-R/3APPLNM PAPPLNM C    SAP-R/3-IOAPPLNM N    DMRELEASE     30DTXTSH       application componentsTXTMD       application componentsTXTLG       application components

Infoobject 0record is missing in infosource!!

Hai,
While loading data into ODS, I am getting the following message "Infoobject 0record is missing in infosource!!".
Where can I enter "0record"? Please do not say in the communication structure.
Where can I enter "0 record mode"? I am searching in the "Infosource screen " of tab "Datasource/Trans.strcuture". I donot know where to enter "0record".
points will be given.
With Regards,Jaheer

Hai Dixon,
I found one solution for 0record mode.
Just simply enter '0Recordmode' in the Infosource screen of tab 'Datasource/Trans.structure'.
example
Infobject
SRPID
PQTY
SALES
0RECORDMODE
Once you enter like this, you will not get this message. This way I solve the problem.
If useful provide points. Jaheer

Risk category field is missing in dso for 0fiar_o09 credit management.

Hi BI Experts,
I am using the standard extractor for the credit management dso 0fiar_o09. The field for risk category originates from our R3 system in table knkk-ctplc. It displays correctly in the psa. The transformation rsds 0fi_ar_9 maps it to 0risk_categ. It appears as an infoObject in the infoSource. The trcs transformation maps the rule also.
However, when I try to display the data in the dso, the risk category field does not display at all.
Please help with any possible suggestions to display the missing field.
Kind regards,
Cheryl Adamonis

I resolved this issue by removing the check in the 'attribute only' selection on the general tab of the infoObject.

Key Figure missing in update rules

Hi All,
A Key figure is missing in Update rule of ODS & Infocube.
But it is listed in infosource ( comm. & transfer structure) of ODS.
Why it is so . Any suggestions.
infosource->ODS_>infocube.
Please help me.
Edited by: anand k on Mar 24, 2008 12:16 PM

Hi,
I will give the process that I followed (as you specified) now:
1. I deleted the Source System Assignment for the Infosource.
2. Next went to Source Systems. Right click on source system and replicate it.
3. Select the InfoSoucre and assign the Data Source.
4. Here I automatically got the Field(ZZMBGBTR).
5. I added the field in the Communication Structure. and then assigned the Transfer Rules. Next activated the InfoSource.NExt checked the InfoCube for the KeyFigure. That InfoObject ZQTY is available.
6. I activated the InfoCube. Right Click and select Create Update Rules. Still I didnt got that InfoObject.
Regards
Jay

Fields missing in Update rules

I am creating snap shot DSO for inventory management and after that i created the update rules for it linking it to the info source 2LIS_03_BX. When i do this i am missing the info objects that i created to include in the DSO. How do i solve this issue as those info objects are very important and i have to create the routines for it.
I have got the units for those fields and they are mapped but the info objects itself are missing.
Thanks for any help in advance
Naveen

HI Naveen,
Yes, you can include the missing infoobject in DSO. for that you need to follow bellow steps:
a). Delete the data from DSO.
b). you have to include the infoobject in DSO.
Double click on DSO>select chage mode->select keyfield /data field node--->right click select Infoobject Direct Input.
c). Activate the DSO
Brief Description about 2LIS_03_BX :
The 2LIS_03_BX is used to extract an opening stock balance on a detailed level (material, plant, storage location and so on). At this moment, the opening stock is the operative stock in the source system. "At this moment" is the point in time at which the statistical setup ran for infosource 2LIS_03_BX.Loading the opening stock balance InfoSource 2LIS_03_BX into data target.In the InfoPackage, choose the upload mode u201CCreate opening balanceu201D.
Regards,
Suman.

Fields missing from PSA Hierarchy transfer structures

Hi,
I am facing a strange problem. After replicating the source system and running program RS_TRANSTRU_ACTIVATE_ALL we are getting errors in 0Equipment_hier and 0funct_loc_hier. it complains about missing equnr and tplnr fields from the transfer structure.
We were using the datasources all the while, but we might not have done the replication in a long time.
Since it is a PSA hierarchy, it has Header and Node communication structures. The Node should be mapped to EQUNR but it not coming from Transfer structure.
I executed 0Equipment_hier from RSA3 and I can see the fields like nodename and infoobject. but even in PSA we don't see the fields.
We applied latest SPs in BW. SP 20 BW 3.5. Any help is appreciated.

hi Chimei,
try to check the transfer structure if the fields have been included,
rsa1-infosource-0equipment transfer rules - change transfer rules,
click tab 'datasource/transf.rules', check if the equnr is in left side (bw transfer structure), if it's not there, check if it's in right side (source system extract structure), if it's there, cursor position on it and use right arrow button there to have it in right side.
hope this helps.

FIELDS MISSING

Hi,
When i replicated CO-PA data into BI. It created two DS's:
0COPA_RCTY AND 1_CO_PA_XXXXXXX
I created an Infosource and transfer rules for 1_CO_PA_XXXXXXX but there are a few fields missing that i do see in the operating concern such as:
ARTNR=0MATERIAL
KNDNR=0CUSTOMER
BZIRK=0SALES_DIST
Why are these fields not in the Infosource since they are in the operating concern?
Where would they be?
Thanks

Delete the data source and then need to re-create using KEB2 transaction. While re-creating the data source use the same old name so that there won't be any changes in the BW side when you need to assign the data source to info-source. Just replicate the new data source in BW side and map the new field in info-source.
(you can also try, goto KE24 and edit the dataaource and add your fields not 100% sure of it works)
how to select fields refer doc:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6

Transformation between DS and DSO missing Non-cumulative KYF

Hi SDN,
I installed the business content for CML, and am working with 0CML_DELTA_CAP datasource. I would like to create a transformation between this datasource and DSO 0CML_O03.
By default, when you install the CML business content, the datasources use the 3.x dataflow concept (transfer rules, infosources, and update rules).
I would like to use the 7.x dataflow concept and created a transformation between the 0CML_DELTA_CAP datasource and the 0CML_O03 DSO. In the transformation, it is missing the fields 0CML_B330, 0CML_B340, 0CML_B360, 0CML_B380 in the datatarget. These key figures are non-cumulative with NCum Value change (0CML_B330 uses 0CML_B331 as value change). The value change key figures show up in the transformation, but the non-culmulative key figures do not.
Does anyone have any ideas why the non-cuml. kyf are not showing up in the transformation?
Thanks,

Hi Brendon,
The non- cumulative key figures are not mapped in the transformation. Only the 'Inflow' and 'Outflow' key figures for the non- cumulative key figure are mapped.
You can check the property for the non- *** KF in RSD1, where you would find the corresponding inflow and outflow kf. If both of these are mapped in the transformation, the non- *** kf would calculate the value in the report in which it is included as:
Non-*** KF value = Inflow value - Outflow value.
Hope this helps.
Regards,
Abhishek.

Error in creating transfer rules beween infosource and datasource in BI 7.0

Hello Guys
I am gettting the following error when trying to create transfer rules between infosource and datasource.
1. Error while activating transformation
2. Deletion of Objects with Type Transformation
3. Preprocessing/Collecting DDIC Objects for Transfor mation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
4. Post Processing/Checking the Deletion for Transfor mation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
5. Object Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K has been deleted
6. Name of object of type 'TRCS' is missing
7. Name of object of type 'TRCS' is missing
8.Key rule 1 (target field: 0COMP_CODE): Initial update set
9. Key rule 2 (target field: 0PLANT): Initial update set
10. Key rule 3 (target field: 0OI_EBELN): Initial update set
11. Key rule 4 (target field: 0AC_DOC_NO): Initial update set
12. No rule exists
13. Saving Objects with Type Transformation
14. Saving Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
15. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K saved successfully
16. Activation of Objects with Type Transformation
17. Saving Objects with Type Transformation
18. Internal Activation (Transformation )
19. Preprocessing / Creation of DDIC Objects for Trans formation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
20. Post Processing/Checking the Activation for Transf ormation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
21. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was activated
22. Syntax error in GP_ERR_RSTRAN_MASTER_TMPL, row 1,644 (-> long text)
23. Error during generation
24. Error when activating Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
25. Resetting of Incorrect Objects Back to the Active Version (Transformation )
26. Preprocessing / Creation of DDIC Objects for Trans formation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
27. Post Processing/Checking the Activation for Transf ormation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
28. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was activated
29. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was reset to the active version
Can anyone send me a document on how to create cubes, info and data sources,ODS's,multicubes and t/f and update rules in BI 7.0
Thanks.

Transformations in BI7
http://help.sap.com/saphelp_nw04s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
Regards,
R.Ravi

Infosource 8ZISCMS10 is not defined in the source system

Hi Gurus,
I got an issue when loading the data with in SAP BW (Info source is ODS),It threw an error message stating "Infosource 8ZISCMS10 is not defined in the source system",
Could any one of you help me in this regrad plz,
N:B: I have activated the transfer structure through RS_TRANSTRU_ACTIVATE_ALL and replicated the data sources before loading...

When u activate DSO/ODS (say ZISCMS10) it creates datasource (8ZISCMS10) & Infosource (8ZISCMS10)
U can check these at ...... Modeling --> Datasources -> BI -> BI source system name. If it is missing .. reactivate DSO/ODS.
If the load is failing in QA, u should rereactivate DSO/ODS in DEV and transport that to QA.. After transport.. make sure datasource (8ZISCMS10) & Infosource (8ZISCMS10) appears in QA (Modeling --> Datasources -> BI -> BI source system name)

Business cont error during installation in BW 7.3 - STOP elm miss in D vers

Hi Gurus,
We recently installed BW 7.3 system. When I try to install 2LIS_13_VDITM from infosource I got the following Error when I use the option of install before and after.
It is ok for if I choose only before.
@5C\QError@     Template '0TPL_0SD_SALESREVENUE_1' references to non-existant query view '0SD_C03_Q0009_V001'
@5C\QError@     Template '0TPL_0SD_SALESREVENUE_1' references to non-existant query view '0SD_C03_Q0009_V001'
@8N\QCancel@     Element 3ZWCZ7W5594ICAEIGVRYEY29R is missing in version D
@8N\QCancel@     Element 3ZWCZ7W5594ICAEIGVRYEY29R is missing in version D
@8N\QCancel@     Element 45P3NNHXH20L07FZRR6HE4UM7 is missing in version D
@8N\QCancel@     Element 45P3NNHXH20L07FZRR6HE4UM7 is missing in version D
@8N\QCancel@     Element 45P3NNHXH20L07FZRR6HE4UM7 is missing in version D
@8N\QCancel@     Element 45P3NNHXH20L07FZRR6HE4UM7 is missing in version D
@5C\QError@     Template '0TPL_DB_GIS_TG' references to non-existant query view '0DB_MC01_Q0002_V03'
@5C\QError@     Template '0TPL_DB_GIS_TG' references to non-existant query view '0DB_MC01_Q0002_V03'
@5C\QError@     Template '0TPL_DB_GIS_TG' references to non-existant query view '0DB_MC01_Q0002_V03'
@5C\QError@     Template '0TPL_DB_GIS_TG' references to non-existant query view '0DB_MC01_Q0002_V03'
@5C\QError@     Object 93A050CDP6OZFLWKMESIEXAY7 (InfoObject,IOBJ) could not be collected for object 0RMP_ABCLOCPRB_M01 (Data Mining Model,DMMO)
@5C\QError@     Object '93A050CDP6OZFLWKMESIEXAY7' (IOBJ) of type 'InfoObject' is not available in version 'D'
@5C\QError@     Object D1ZXLV3LRRMNYBFU6VOIJDF5H (InfoObject,IOBJ) could not be collected for object 0RMP_ABCLOCVGP_M01 (Data Mining Model,DMMO)
@5C\QError@     Object 'D1ZXLV3LRRMNYBFU6VOIJDF5H' (IOBJ) of type 'InfoObject' is not available in version 'D'
@5C\QError@     The requested query /488213MV7RFDRO749V0RFKTT7 does not exist on the current server
@5C\QError@     The requested query /48ET19HBQCWNS4DY7L7UD2TSQ does not exist on the current server
@5C\QError@     The requested query /7KU37C7IG3T7AFCOH7R5RRM9I does not exist on the current server
@5C\QError@     The requested query /7KU37C7IG3T7AGXCRBYS05YUX does not exist on the current server
How do resolve it because I need to install the whole datflow.
thanksBhat

Hello Bhat,
I had created a message regarding this issue. However SAP answered that the solution cannot be provided by note. Either we have to wait or create a custom query. I have created a new message now urging for a better solution.
The problem with element 3ZWCZ7W5594ICAEIGVRYEY29R results from a variable which has been deleted in the 7.35 content version or maybe already earlier versions.
Best regards
Thomas

Information in PSA for 0IMFA_1 is missing in infocube

Hello everyone,
I've loaded all the necessary data for 0IMFA_1 through all the nessesary infosources via PSA's, also i've preloaded the 0im_fa_ip_8, 0im_fa_ip_9, and 0im_fa_iq_9 (0im_fa_ip_7 is not required).
Information that i see coming for Budget- for mesures, in this case WBS's is present in the PSA but not in the cube itself. Specifically i miss the resolution of 0VTDETAIL
which enables me to seperate the line for original budget to supplments or returns.
As a result of this the amounts <b>aggregate</b> for every line for different approval years.
I suspect start routine which exist in the update rules of the infosource.
has anybody encountered this?
Thanks in advance for your answers

hi again Adi
check if applicable oss note 723601-0IMFA_1: 0VTDETAIL is not updated correctly.
hope this helps.
Symptom
When you update the 0IMFA_1 InfoCube from the 0CO_OM_OPA_2 and 0CO_OM_WBS_2 InfoSources, the 0VTDETAIL characteristic is not updated.
Other terms
Update rule
Reason and Prerequisites
This is due to an error in the update rules.
Solution
The problem is solved with the following Support Packages:
BW Release 2.1C as of Support Package 29
BW Release 3.0B as of Support Package 21
BW Release 3.20 as of Support Package 13
BW Release 3.30 as of Support Package 6
After you import the relevant Support Package, transfer the affected update rules again from the Content delivered by SAP.

Missing content for inventory management (cube 0IC_C03)

Hi everybody,
I installed the following BI content for inventory management: Cube 0IC_C03, InfoSource 2LIS_03_BX and transfer rules from data source 2LIS_03_BX to info source 2LIS_03_BX. However, I'm not able to the update rule from info source 2LIS_03_BX to info cube 0IC_C03. I can only find the old update rule 0IC_C032LIS_40_S278 -> 0IC_C03.
I also couldn't find the update rule for material movements from 2LIS_03_BF to infocube 0IC_C03.
How can I find this missing content. We are using BI Content Release 704 Level 1.
Thanks for your help!
Thomas

Hi Oscar,
unfortunately, I was not able to find a transformation for the datasource migrated to 7.0.
Btw, how do I determine to which version data sources are replicated. I have an underlying ECC6.0 system. When I replicate all data sources for that source system, datasources automatically show up as 7.0. I'm missing the pop-up question whether or not I want to replicate as 3.5 or 7.0.
Thanks in advance!
Thomas

Missing Infosource 8*

Similar Messages

Maybe you are looking for