Missing Insert Link while Creating InfoSet
Dear All,
When I was Creating an Infoset the insert link for inserting a new info provider is missing. (Both from RSA1 and RSISET)
There is a setting in the SPRO under the tab BI Settings> Performance settings> Infoset Settings.
Here we need to mention number of where conditions. Ideally what should be the number?
Please answer this is urgent for me.
Points assured.
Regards
Mahesh
no answer.
Similar Messages
-
Missing Parts List While creating Prd. Order
Hi Friends,
My client is creating production Orders Manually thru CO01and While Creating & Saving The Production Order System Is Not Supporting In Giving Missing Parts list In spite Of Deficit of Un Restricted stock inStorage Location For BOM components used in that Order.
To my surprise when the defisit is for all the BOM components only one component is showing as missing part in missing parts list.
But While confirming the order The system is showing missing parts for all the components which are defisit for order confirmation.
I Tried To Get This From the Following Method
Checked For Define checking control In OPJK.
Selected plant, Order type & selected the business function 1 for create or 2 for release. And Maintained These Settings
a) Removed tick mark in No Availability check.
b) Type of component check Given as - ATP check.
c) Material release - 1. User decides on release if parts are missing.
d) PP Checking rule (Which Is same As with plant parameter OPPQ)
e) In Define scope of check (OPJJ) made a tick mark in check w/o RLT.
Then Assigned the availability checking group at Mrp View of Header material.
In spite Of All These Settings Still At The Time Of Order Release/Save A Warning Massage Or A Informative Massage Is Not Appearing
*Please Suggestu2026u2026u2026u2026*
hariHi,
Please check same checking rule use in Material master and with order type and plant?
Check the cheking group in material master MRP3 view for all material.
Go to Transection OPJJ - Maintain scope of check,
Select your Checking rule which you have assing to your order type and tick INLCUDE RESERVATION.
(1). CO24- Missing Parts Information System
Under this transaction you choose Selection from Reservations and then select Plant & Material then you can get Missing Parts List for your respective material without production / planned order also.
(2). COOIS : Production Order Information System
Under this transaction you need to Select in List option as Components and then go on Selection Tab.
For collective availability check use
COHV - Excute the roport w ith collective avaliabilty check.
COMAC.
Hope this help.
Regards,
R.Brahmankar -
Missing right parent while creating table.
I get the "ORA-00907: missing right parenthesis" error while creating the table with the code below.
create table SALES_ORDER
ORDERNO varchar2(6) Primary key check(ORDERNO like 'O%'),
CLIENTNO varchar2(6) foreign key references CLIENT_MASTER(CLIENTNO),
ORDERDATE date not null,
DELYADDR varchar2(25),
SALESMANNO varchar2(6) foreign references SALESMAN_MASTER(SALESMANNO),
DELYTYPE char(1) default 'F' check(DELYTYPE IN('P','F')),
BILLYN char(1),
DELYDATE date check(DELYDATE >= ORDERDATE),
ORDERSTATUS varchar2(10) check(ORDERSTATUS IN('In Process','Fulfilled','BackOrder','Cancelled'))
What am i doing wrong?Hi,
1003332 wrote:
The solution in the first reply worked.
The problem was i think with both the 'reference statement' as well as the 'check condition'.
As pointed out in the solution the 'check(DELYDATE >= ORDERDATE)' constraint was referencing another column.
So i removed the check and it worked.
But i still don't know how to implement the "DELYDATE >= ORDERDATE" condition!
Would be helpful if someone could tell how?You can find the syntax and examples in the SQL Language manual
A constraint that references more than 1 column can't be attached to one of the columns; it has to be defined as a table-level constraint, like the one at the end of this command:
create table SALES_ORDER
ORDERNO varchar2 (6) Primary key
check (ORDERNO like 'O%'),
CLIENTNO varchar2 (6) references CLIENT_MASTER (CLIENTNO),
ORDERDATE date not null,
DELYADDR varchar2 (25),
SALESMANNO varchar2(6) references SALESMAN_MASTER (SALESMANNO),
DELYTYPE char (1) default 'F'
check (DELYTYPE IN ('P','F')),
BILLYN char (1),
DELYDATE date,
ORDERSTATUS varchar2 (10) check (ORDERSTATUS IN ('In Process','Fulfilled','BackOrder','Cancelled')),
CONSTRAINT sales_order_date_ck
check (DELYDATE >= ORDERDATE)
);As you can see, this can be done in the CREATE TABLE statement; use an ALTER TABLE statement only if you want to. -
Error while creating - Infoset in SQ02
This is the error, i am getting when i am trying to create - Infoset in SQ02. Can any one help to resolve, check and generate
the infoset
Error in parameter PYSORT
Statement concluding with "...TYPE" ended unexpectedly.You could try applying OSS note 1117474. You may want to review this note to see whether it fts your case..
Hope this helps. -
Error while creating Infoset Creation
Hi All,
I've created an infoset using a program and data structure. But while generating the infoset this below mesg was getting as error:
Generation Error-->
Data Retrival Program-->
Commentary <Query_head> or <Query_body> is missing.
Please guide me with this error.
Thnks & Rgds,
Ravino answer.
-
ORA-00905: missing keyword error while creating a materialized view
Hi Gurus,
I am trying to create a materialized view as :
1 CREATE MATERIALIZED VIEW AMREG.ClientData
2 TABLESPACE AMREG_DATA
3 COMPRESS
4 PARALLEL
5 NOLOGGING
6 BUILD IMMEDIATE
7 REFRESH COMPLETE
8 ON DEMAND
9 DISABLE QUERY REWRITE
10 REFRESH START WITH TRUNC( SYSDATE + 1 ) + 3/24 NEXT TRUNC( SYSDATE + 1 ) + 3/24
11 AS
12 SELECT
13 CHILD.CLIENT_SGK "Child SGK",
14 CHILD.CLIENT_NAME "Child Name",
15 CHILD.ARC_ACCT_CD "Child ARC Acct Code",
16 ULTIMATE.CLIENT_SGK "Ultimate Parent SGK",
17 ULTIMATE.CLIENT_NAME "Ultimate Parent Name",
18 ULTIMATE.ARC_ACCT_CD "Ultimate ARC Acct Code",
19 HIER.LVL_FROM_ANCESTOR ,
20 FROM [email protected] CHILD,
21 [email protected] HIER,
22 [email protected] ULTIMATE
23 WHERE HIER.DESCENDANT_CLIENT_SGK = CHILD.CLIENT_SGK
24* AND ULTIMATE.CLIENT_SGK = HIER.ANCESTOR_CLIENT_SGK;
SQL> /
REFRESH START WITH TRUNC( SYSDATE + 1 ) + 3/24 NEXT TRUNC( SYSDATE + 1 ) + 3/24
ERROR at line 10:
ORA-00905: missing keyword
DBLink name is : DNYCPH60.WORLD
Please guide me on this and help to resolve the issue.Ummm how about not posting the same question 4 times in 3 different forums?
Gints Plivna
http://www.gplivna.eu -
ORA-00905: missing keyword error while creating a materialised view
Hi Gurus,
I am trying to create a materialized view as :
1 CREATE MATERIALIZED VIEW AMREG.ClientData
2 TABLESPACE AMREG_DATA
3 COMPRESS
4 PARALLEL
5 NOLOGGING
6 BUILD IMMEDIATE
7 REFRESH COMPLETE
8 ON DEMAND
9 DISABLE QUERY REWRITE
10 REFRESH START WITH TRUNC( SYSDATE + 1 ) + 3/24 NEXT TRUNC( SYSDATE + 1 ) + 3/24
11 AS
12 SELECT
13 CHILD.CLIENT_SGK "Child SGK",
14 CHILD.CLIENT_NAME "Child Name",
15 CHILD.ARC_ACCT_CD "Child ARC Acct Code",
16 ULTIMATE.CLIENT_SGK "Ultimate Parent SGK",
17 ULTIMATE.CLIENT_NAME "Ultimate Parent Name",
18 ULTIMATE.ARC_ACCT_CD "Ultimate ARC Acct Code",
19 HIER.LVL_FROM_ANCESTOR ,
20 FROM [email protected] CHILD,
21 [email protected] HIER,
22 [email protected] ULTIMATE
23 WHERE HIER.DESCENDANT_CLIENT_SGK = CHILD.CLIENT_SGK
24* AND ULTIMATE.CLIENT_SGK = HIER.ANCESTOR_CLIENT_SGK;
SQL> /
REFRESH START WITH TRUNC( SYSDATE + 1 ) + 3/24 NEXT TRUNC( SYSDATE + 1 ) + 3/24
ERROR at line 10:
ORA-00905: missing keyword
DBLink name is : DNYCPH60.WORLD
Please guide me on this and help to resolve the issue.http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_6002.htm#i2063793 gives you the syntax of the command.
I think the fact that you have two REFRESH clauses separated by a query rewrite clause is causing some confusion.
7 REFRESH COMPLETE
8 ON DEMAND
9 DISABLE QUERY REWRITE
10 REFRESH START WITH TRUNC( SYSDATE + 1 ) + 3/24 NEXT TRUNC( SYSDATE + 1 ) + 3/24
11 AS
probably should be
REFRESH COMPLETE
ON DEMAND
START WITH TRUNC( SYSDATE + 1 ) + 3/24 NEXT TRUNC( SYSDATE + 1 ) + 3/24
DISABLE QUERY REWRITE -
View Objects Fetch depth with View Links while creating Service Data Object
Hi ,
I am trying to create SDO's for my Business components.
Here are my Entities & relations :
Entity Objects : 1) EmployeeEo 2) DepartmentEO 3) PropertyEO
And corresponding View Objects 1) EmployeeVO 2) DepartmentVO 3) PropertyVO.
Associations : Employee -> Dept (m:1) , Employee -> Property (1:M) , And corresponding View Links as well.
When i expose the VO's in AM like :
DepartmentVO, with EmployeeVO from dept_emp_view link => This fetches all the data from Dept-> Employees -> Property
However i don't want the tree fetch to be like that , i want to have my fetch restricted to only one level ie Dept-> Employees
and a different fetch for Employees -> Property .
Please suggest.
Thanks !!Was able to do it by extending VO
-
Pr00 missing in webui while creating the transaction in ui
Hi
we have the scenario in crm like opportunity management , quotation analysis where in pr00 condition we have to input .
pr00 condition is mandatory in all the transactions in crm . for this reason pr00 we maintained as mandatory in the pricing procedure and we replicated all the pricing procedures in to crm . and when we tested a transaction in SAP GUI system is giving message as "PR00 is mandatory " and we are going in to item conditions tab and we are entering the pr00 manually .
But the same when we are trying to configure on webui , we added all the fields of gui in to webui by searching the components . and when we run the transaction in webui , system is giving the message "pr00 is mandatory"and when we go into pricing details tab , there is no pr00 in the price type drill down . i cannot input manually the proo in webui , i have to select it form drop down list only . but which is not appearing .
please suggestissue solved
-
Error: ORA-00905:Missing keyword while creating Materialized view
Hi Gurus,
I am trying to create a materialized view as :
1 CREATE MATERIALIZED VIEW AMREG.ClientData
2 TABLESPACE AMREG_DATA
3 COMPRESS
4 PARALLEL
5 NOLOGGING
6 BUILD IMMEDIATE
7 REFRESH COMPLETE
8 ON DEMAND
9 DISABLE QUERY REWRITE
10 REFRESH START WITH TRUNC( SYSDATE + 1 ) + 3/24 NEXT TRUNC( SYSDATE + 1 ) + 3/24
11 AS
12 SELECT
13 CHILD.CLIENT_SGK "Child SGK",
14 CHILD.CLIENT_NAME "Child Name",
15 CHILD.ARC_ACCT_CD "Child ARC Acct Code",
16 ULTIMATE.CLIENT_SGK "Ultimate Parent SGK",
17 ULTIMATE.CLIENT_NAME "Ultimate Parent Name",
18 ULTIMATE.ARC_ACCT_CD "Ultimate ARC Acct Code",
19 HIER.LVL_FROM_ANCESTOR ,
20 FROM [email protected] CHILD,
21 [email protected] HIER,
22 [email protected] ULTIMATE
23 WHERE HIER.DESCENDANT_CLIENT_SGK = CHILD.CLIENT_SGK
24* AND ULTIMATE.CLIENT_SGK = HIER.ANCESTOR_CLIENT_SGK;
SQL> /
REFRESH START WITH TRUNC( SYSDATE + 1 ) + 3/24 NEXT TRUNC( SYSDATE + 1 ) + 3/24
ERROR at line 10:
ORA-00905: missing keyword
DBLink name is : DNYCPH60.WORLD
Please guide me on this and help to resolve the issue.I provided the answer over at the duplicate post ...
ORA-00905: missing keyword error while creating a materialised view
Please, please, please ... please do not duplicate posts. Pick one. If you don't get an answer in a reasonable time - close it (edit the title) and THEN open in a different forum. -
APP-RG-09518: An error occurred while creating a database link
Hi All,
While creating a database link in Oracle EBS from one instance to another instance for transferring FSG reports
Go to Any GL Setup responsibility...Setup>System>Database links > Create new database link
Prior to the above...below steps should be done on the server.
1.grant create database link to <apps.user>; (on db server)
2.source tns entry should be in destination tns file and destination tns entry in source tns file. (check tnsping after entry)
3.*make sure destination tns entry of 8.0.6 oracle home should be in source tns file* (Because we are creating db link for the application)
4.Run the Program FSG Report.
Regards,
Harish Muramshetty.Hi,
I have solved the issue as below:
This error was started when I install a software which I have made myself and it uses sql server compact edition 3.5.
I saw when I manually replaced the sql related files from "C:\Program Files (x86)\Microsoft SQL Server Compact Edition\v3.5" with the files which my software setup had "version 3.5.5386.0" then the error started. And if copy back the latest version 3.5.8080.0
then it disappear. So use latest sql files in your software too.
My software was replacing the the latest files with older version.
Muhammad Arshad Awan -
I am receiveing error while creating Z table: Entry in table TAORA missing
Hi Experts,
I am receiving "Entry in table TAORA missing" while creating Z table.
Please help
Edited by: N_niki on Jun 11, 2011 9:22 AMHi
1) Check for the DB System. The Table name in "Entry in table TAORA missing", meant to save the "DATA CLASS of the ORACLE application"., OR
2) check for the Data Class you Selected, on Creation of the Z Table, for which an Entry exists in the TAORA or the Available DATA CLASS in the TAORA Table to fix it.
Regards
Gopu -
Error while creating cust In table T078D, the entry VD01 is missing...
Hi Gurus,
I am new to SAP and have just installed SAP 4.7 on my laptop. While creating customer master, a message displays In table T078D, the entry VD01 is missing, and even for XD01 the same message is displayed. Can you guysplease help me with this?
Thanks
ShivaHi,
this looks like some customizing records are missing in your installation.
Table T078D contains the transaction dependant field settings.
This is in relation with customizing transaction OB20
In that table, there should be at least 15 records with the corresponding table key
FD01
FD02
FD03
VD01
VD02
VD03
WR01
WR02
WR03
WR11
WR12
WR13
XD01
XD02
XD03
So, if you don't find why standard customizing records are not part of you installation, you may re-create such records with the above keys.
Please note that all fields that are not part of the key should at least contains '.' character for each digits of each fields.
eg: FAUSA is 40 digits long.
FAUSA = '........................................'
Hope this helps
Regards
Alain -
Message for Missing Parts While Creating Order
Dear Friends,
While Creating & Saving The Production Order System Is Not Supporting In Giving A Warning Massage On Missing Parts In spite Of Deficit In Storage Location For Materials.
The Clint Requires A Warning Massage In Case Of Materials Shortage In SL
I Tried To Get This From the Following Method
Checked For Define checking control In OPJK.
Selected plant, Order type & selected the business function 1 for create or 2 for release. And Maintained These Settings
a) Removed tick mark in No Availability check.
b) Type of component check Given as - ATP check.
c) Material release - 1. User decides on release if parts are missing.
d) PP Checking rule (Which Is same As with plant parameter OPPQ)
e) In Define scope of check (OPJJ) made a tick mark in check w/o RLT.
Then Assigned the availability checking group at Mrp View of Header material.
In spite Of All These Settings Still At The Time Of Order Release/Save A Warning Massage Or A Informative Massage Is Not Appearing
Please Suggestu2026u2026u2026u2026
HariDear Friends,
I Did The Following Settings
A) Define Checking control 02 Individual Req
Total Sales Single Record
Total Div Rec Single Record
B)Define Checking Rule PP Check Rule
C)Define Scope Of Check Availability Check 02 Ind Req
Checking Rule PP Check Rule
Stock
Include Safety stock
Stock In Transfer
Incl Quanty Insp Stock
And When No tick Mark Is Applied In NO Stor Loc Inspectn
Not Used Checking Group "KP" In components material master.
After Making All This Settings Also Before Order ReleaseWhen Pressed u201CMaterial Availability Checku201D
The System Is Showing All Materials Available In Spite Of Deficit In Storage Location
Suggestu2026u2026 -
Error while creating an Infoset
Hi
I am getting an error in rsa1 while creating an Infoset. The error message reads "Network is only supported in WinGUI". But I do not get any error while creating Infoobjects or DSOs or Infocubes. Error screenshot is attached.
I am using SAPGUI for Mac.
Is this a known issue ?
Thanks for your attention.
ArijitHi Arijit,
Could you refer this below SCN Post,
http://scn.sap.com/thread/137946
-Arun.M.D
Maybe you are looking for
-
My Dreamweaver is crashing on open.
I just downloaded the latest version of Dreamweaver. When I try and open the app it crashes right away. Any ideas how I can fix this? I need this to work to operate my business. Thank you
-
recieved a pdf form and need to fill in the lines with text using acrobat pro9 mac
-
I've created a form in LC Designer 8.05. I want users to be able to fill out my form and send the data back as a pdf. I've looked over the forum and tried using the an Email Submit Button and editing the XML Source, but then my button doesn't work. I
-
Why does my Mac shut down when using Safari?
Every once in a while (randomly) my mac will reboot due to an error even when I only have the Safari Application open. How can I stop my mac from doing this. I have the 2011 macbook pro 13 inch with the latest OS (Mountain Lion). Everything is up to
-
I'm teaching a media arts course for the first time, and I'm trying to figure out how to use images taken with a digital camera, import them to Premiere Elements 7, and put them in the timeline without having to shorten the length of them. As soon a