Missing inspector and media browser please help
Hi, I have been happily editing in iweb - building a new website... but today suddenly I have found it impossible to make the Inspector to appear and the media browser is also absent - no matter how many times I click the appropriate buttons.. on the bottom of the screen - or from the top menu - I have been trying to insert hyperlinks - and the default hyperlink is made - but I cannot see the panel to alter it...
I have tried rebooting the program several times - and the computer too... but no use. Still no inspector or media browser anywhere in sight - not visible even in Expose
- although the adjust, colours and fonts menus do appear
thank you for your help, Janine Roberts
Macbook Mac OS X (10.4.9)
thank you for the suggestion - I have now run Disk Utility - and, although it picked up a surprising number of permissions to repair relating to Quicktime - Iweb is still faulty. I also tried today reinstalling it from my master disk - but this has not made any difference. I still cannot make the Iweb inspector or media viewer show themseves.
I am at a complete loss - I was sure reinstalling would work.
Anyone with more ideas? A lot of web pages are up on a new site - but this has stopped me dead.
I ran another program today that uses apparently the same inspector and media viewer - Rapid Weaver - and the panels appeared and worked normally - but I cannot import iweb files into this program to sort them out.
Janine Roberts
Macbook Mac OS X (10.4.9)
Similar Messages
-
Flashing Inspector and media browser
While working a very complex project. Keynote 08's inspector and the media browser start to flash when I start to make any setting changes. This only happens on my Powerbook G4 (2gb ram, 120gb HD, 133). I don't have this issue on my G5. Anyone have any suggestion?
thank you for the suggestion - I have now run Disk Utility - and, although it picked up a surprising number of permissions to repair relating to Quicktime - Iweb is still faulty. I also tried today reinstalling it from my master disk - but this has not made any difference. I still cannot make the Iweb inspector or media viewer show themseves.
I am at a complete loss - I was sure reinstalling would work.
Anyone with more ideas? A lot of web pages are up on a new site - but this has stopped me dead.
I ran another program today that uses apparently the same inspector and media viewer - Rapid Weaver - and the panels appeared and worked normally - but I cannot import iweb files into this program to sort them out.
Janine Roberts
Macbook Mac OS X (10.4.9) -
Suddenly Missing Images and Media Browser iPhoto issues in 1.1.2
Using iWeb 1.1.2. All of the sudden when I open my website in iWeb, many of the images are now displaying as envelopes with question marks. When I click on them in the inspector it shows them linked to the correct image file in iPhoto. At the same time, now when I try to drag photos from my iPhoto library onto the page I get a hyperlink instead of the actual photo. This just started happening (possibly since updating to 1.1.2, since I haven't used iWeb in awhile).
Thanks,
MikeCorrection - when I try to drag photos from *the Media Browser* onto the page I get a hyperlink instead of the actual photo. And this is not a Photo layout...it's just a normal page based on a template.
-
Some Aperture photos and projects missing from iLife Media Browser
Good evening - having a little bit of trouble getting Aperture to work smoothly with my iLife media browser (i.e., inserting photos into Mail, Pages, Keynote, etc).
I currently have 5699 photos and 131 projects in Aperture. But the iLife Media Browser only shows me 5131 photos and 130 projects; when clicking on individual projects in the browser, anywhere from 3 to 70 photos per project are missing. Tried repairing permissions, repairing the database, and rebuilding the database - this improved the issue, but didn't completely resolve it as 5679 photos now show in the Media Browser, and 20 remain missing. Also tried deleting, and generating previews for all my photos in the library. No change.
My library is mostly referenced, with a few photos managed.
Obviously in the grand scheme of things 20 photos missing in the Media Browser not that big a deal. But wanting to get to the root cause though because without solving this issue, I'm concerned about a larger underlying problem that may only get worse as my library grows.
Has anyone had, or resolved a problem similar to this? And can anyone offer any additional suggestions? Are there any specific files that feed the iLife Media Browser that I can delete and rebuild that may solve this issue?
thanks,
MarkI think I've ironed this out. Several intertwined issues. I took a moment to type out my notes; hopefully it helps you guys solve this quickly if you get a call from someone else on this down the line.
[1] original problem of several hundred items missing in Media Browser: probably an issue of previews not being built. Mostly fixed when I regenerated previews for my library, but repairing permissions and repairing the database may have helped too.
[2] Residual problem of 20 items still missing (5698 items displayed in Aperture when selecting Inspector > Library > Photos; 5677 items displayed in Mail Photo Browser). My issue wasn't as much with 20 missing items in a browser as it was with trying to understand the root cause and whether I had an underlying Aperture, Aperture Library, or OS problem that would bite me later. Turns out several things were causing this problem:
[2a] In Aperture, when you select Inspector > Library > Photos , all your content is displayed: photos, videos, and any audio clips you may have imported (e.g., a recorded audio clip on your camera narrating shoot, location, client, exposure value etc). So even though you've selected "Photos", your "xxx items displayed" count on the bottom of the screen reflects all your imported content. This is not the case in the Media Browser - of which there are two variants in Mac OS:
[2a.1] Mail has a Photo Browser, which behaves much like a "Media Browser Lite: the title bar says "Photo Browser", it only accesses your Aperture and iPhoto Libraries, and only shows photos and video.
[2a.2] iWork applications have a more comprehensive Media Browser, where you can select between Audio, Photos, and Movies. If you select Audio the iWork Media Browser will show any audio files present in your Aperture or iTunes library. If you select Movies, the iWork Media Browser will show any movie clips present in your Aperture or iMovie libraries. Photos behaves the same way as "Photo Browser" in Mail, showing any photos present in your Aperture (or iPhoto if installed) libraries.
Turns out I had three audio clips in my Aperture library. When selecting "Photos" in either the Mail or iWork browsers, the total item count will only show photos and videos - no audio clips. So now 17 missing items remain.
[2b] Stacks - one project contained nine photos grouped into a stack. Only the key photo of a stack is previewed/shown in Media Browser. So a stack of nine photos will only show as one in the browser - unstacking the photo will allow them all to appear. So now nine missing items.
[2c] Seven photographs somehow had broken links to their referenced masters, and needed to be reconnected. Down to two missing items.
[2d] One photo simply wouldn't cooperate - no matter how many times I regenerated the preview, or deleted the preview and then regenerated it, nothing worked. I deleted it from the library and reimported it. One missing item remains.
[2e] Final missing item was a photograph I rejected. Makes sense; as media browser does not display rejects.
Problem solved!! Hopefully this might be of help to somebody in the future.
cheers,
Mark -
iMovie '11, what steps am I missing, when I go to SHARE, IDVD is grey and not activated, only ITUNES and MEDIA BROWSER? I want to burn a DVD.
Share your movie to the Media Browser. Then, in iDVD, drag your movie in from the Media Browser at the bottom right.
THe Share to iDVD option is only activated if your source material is DV or AVCHD. -
My appstore wont let me download anything. It says i have to agree to the terms and i agree and again it pop up the same thing over and over! Please help me
I thought i was the only one!! but its happening on my ipad! and i dont even want to try on my iphone uhhh its annoying!
-
"Connect to iTunes to Use Push Notifications" comes almost in every app that I open and it does not notify me when I got message in Whatsapp and Viber. Please help me to overcome it, it is becoming quite annoying!
Did you get any help on this? From what I can see from surfing this site, it's a BUG that no one has offered a solution to. It sometimes happens after a 'reset' and going to ITunes does not offer a way to 'set up push notifications'.
-
I have an itunes account on my home PC. I want to use my same account but on my laptop. How do i do this with out wiping out my phone and backing up all my Pictures and Apps? Please Help.
Copy everything from the old computer or your backup copy of your old computer to your new one.
Type "move itunes library from pc to mac" or similar into the google search bar. -
I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!
Hi there Rlong50,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W. -
I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi
Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer -
iPhone 4 went into recovery mode when trying to restore it. Now the only option iTunes allows is for "restore & upgrade", it is not offer an option to restore from a backup, says that must first do the upgrade, when attempting to do the upgrade the iPhone won't accept it.
How can I restore from a back up in recovery mode when the only option is "restore and upgrade"?
Please help.You don't you must restore your phone first and then you will have the option to restore from your backup.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
My iPod shuffle will not turn on, nor is it recognized by the computer to pull up iTunes. I have order new USB cords and nothing. Please help! Not sure of the generation of iPod shuffle, I think 3rd.
first: why did you download the iOS Beta 8? If you are a developer, go to the Apple Developers website and check what they can do for your case.
second: setup an appointment to a Genius Bar for service. -
I need to pass a query in form of string to DBMS_XMLQUERY.GETXML package...the parameters to the query are date and varchar ..please help me build the string .Below is the query and the out put. ( the string is building fine except the parameters are with out quotes)
here is the procedure
create or replace
procedure temp(
P_MTR_ID VARCHAR2,
P_FROM_DATE IN DATE ,
P_THROUGH_DATE IN DATE ) AS
L_XML CLOB;
l_query VARCHAR2(2000);
BEGIN
l_query:= 'SELECT
a.s_datetime DATETIME,
a.downdate Ending_date,
a.downtime Ending_time,
TO_CHAR(ROUND(a.downusage,3),''9999999.000'') kWh_Usage,
TO_CHAR(ROUND(a.downcost,2),''$9,999,999.00'') kWh_cost,
TO_CHAR(ROUND(B.DOWNUSAGE,3),''9999999.000'') KVARH
FROM
(SELECT s_datetime + .000011574 s_datetime,
TO_CHAR(S_DATETIME ,''mm/dd/yyyy'') DOWNDATE,
DECODE(TO_CHAR(s_datetime+.000011574 ,''hh24:'
||'mi''), ''00:'
||'00'',''24:'
||'00'', TO_CHAR(s_datetime+.000011574,''hh24:'
||'mi'')) downtime,
s_usage downusage,
s_cost downcost
FROM summary_qtrhour
WHERE s_mtrid = '
||P_MTR_ID||
' AND s_mtrch = ''1''
AND s_datetime BETWEEN TO_DATE('
||P_FROM_DATE||
',''DD-MON-YY'') AND (TO_DATE('
||P_THROUGH_DATE||
',''DD-MON-YY'') + 1)
) a,
(SELECT s_datetime + .000011574 s_datetime,
s_usage downusage
FROM summary_qtrhour
WHERE s_mtrid = '
||P_MTR_ID||
' AND s_mtrch = ''2''
AND s_datetime BETWEEN TO_DATE('
||P_FROM_DATE||
',''DD-MON-YY'') AND (TO_DATE('
||P_THROUGH_DATE||
','' DD-MON-YY'') + 1)
) B
where a.S_DATETIME = B.S_DATETIME(+)';
SELECT DBMS_XMLQUERY.GETXML('L_QUERY') INTO L_XML FROM DUAL;
INSERT INTO NK VALUES (L_XML);
DBMS_OUTPUT.PUT_LINE('L_QUERY IS :'||L_QUERY);
END;
OUTPUT parameters are in bold (the issue is they are coming without single quotes otherwise th equery is fine
L_QUERY IS :SELECT
a.s_datetime DATETIME,
a.downdate Ending_date,
a.downtime Ending_time,
TO_CHAR(ROUND(a.downusage,3),'9999999.000') kWh_Usage,
TO_CHAR(ROUND(a.downcost,2),'$9,999,999.00') kWh_cost,
TO_CHAR(ROUND(B.DOWNUSAGE,3),'9999999.000') KVARH
FROM
(SELECT s_datetime + .000011574 s_datetime,
TO_CHAR(S_DATETIME ,'mm/dd/yyyy') DOWNDATE,
DECODE(TO_CHAR(s_datetime+.000011574 ,'hh24:mi'), '00:00','24:00', TO_CHAR(s_datetime+.000011574,'hh24:mi')) downtime,
s_usage downusage,
s_cost downcost
FROM summary_qtrhour
WHERE s_mtrid = N3165 AND s_mtrch = '1'
AND s_datetime BETWEEN TO_DATE(01-JAN-13,'DD-MON-YY') AND (TO_DATE(31-JAN-13,'DD-MON-YY') + 1)
) a,
(SELECT s_datetime + .000011574 s_datetime,
s_usage downusage
FROM summary_qtrhour
WHERE s_mtrid = N3165 AND s_mtrch = '2'
AND s_datetime BETWEEN TO_DATE(01-JAN-13,'DD-MON-YY') AND (TO_DATE(31-JAN-13,' DD-MON-YY') + 1)
) B
where a.S_DATETIME = B.S_DATETIME(+)The correct way to handle this is to use bind variables.
And use DBMS_XMLGEN instead of DBMS_XMLQUERY :
create or replace procedure temp (
p_mtr_id in varchar2
, p_from_date in date
, p_through_date in date
is
l_xml CLOB;
l_query VARCHAR2(2000);
l_ctx dbms_xmlgen.ctxHandle;
begin
l_query:= 'SELECT
a.s_datetime DATETIME,
a.downdate Ending_date,
a.downtime Ending_time,
TO_CHAR(ROUND(a.downusage,3),''9999999.000'') kWh_Usage,
TO_CHAR(ROUND(a.downcost,2),''$9,999,999.00'') kWh_cost,
TO_CHAR(ROUND(B.DOWNUSAGE,3),''9999999.000'') KVARH
FROM
(SELECT s_datetime + .000011574 s_datetime,
TO_CHAR(S_DATETIME ,''mm/dd/yyyy'') DOWNDATE,
DECODE(TO_CHAR(s_datetime+.000011574 ,''hh24:'
||'mi''), ''00:'
||'00'',''24:'
||'00'', TO_CHAR(s_datetime+.000011574,''hh24:'
||'mi'')) downtime,
s_usage downusage,
s_cost downcost
FROM summary_qtrhour
WHERE s_mtrid = :P_MTR_ID
AND s_mtrch = ''1''
AND s_datetime BETWEEN TO_DATE(:P_FROM_DATE,''DD-MON-YY'')
AND (TO_DATE(:P_THROUGH_DATE,''DD-MON-YY'') + 1)
) a,
(SELECT s_datetime + .000011574 s_datetime,
s_usage downusage
FROM summary_qtrhour
WHERE s_mtrid = :P_MTR_ID
AND s_mtrch = ''2''
AND s_datetime BETWEEN TO_DATE(:P_FROM_DATE,''DD-MON-YY'')
AND (TO_DATE(:P_THROUGH_DATE,'' DD-MON-YY'') + 1)
) B
where a.S_DATETIME = B.S_DATETIME(+)';
l_ctx := dbms_xmlgen.newContext(l_query);
dbms_xmlgen.setBindValue(l_ctx, 'P_MTR_ID', p_mtr_id);
dbms_xmlgen.setBindValue(l_ctx, 'P_FROM_DATE', to_char(p_from_date, 'DD-MON-YY'));
dbms_xmlgen.setBindValue(l_ctx, 'P_THROUGH_DATE', to_char(p_through_date, 'DD-MON-YY'));
l_xml := dbms_xmlgen.getXML(l_ctx);
dbms_xmlgen.closeContext(l_ctx);
insert into nk values (l_xml);
end; -
The enter key is not working in firefox but it has working fine in chrome and IE so please help me to rid out from this.
Hello gokulaan, '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
I try to access the itunes store and my bar goes halfway and stop. Please help
I am trying to access the Itunes Store and my bar goes halfway and stop.
Please help.Is it endlessly saying "Accessing iTunes Store"? Or is something a bit different going on?
Maybe you are looking for
-
At the time of PO create ME21N and PO change (ME22N), the user exit will look at the materials in the PO and go to the z-table. It will add the quantities of the materials from the PO that are in the same pricing group and determine the correct pri
-
I have an HP 7515 All-in-One printer. I have uninstalled and reinstalled the operating programs on my Dell XPS 8700 Win7 Pro several times and it says everything is working the way it should but when I click on the desktop icon, the program will not
-
Directory ID in DirectorySession.create in OBPM 10GR3
What is the Directory ID in DirectorySession.create(id,participant,password) Creates a DirectorySession to a Directory different than the one using at runtime. You have to indicate the Directory ID and the participant/password.
-
Removing attributes from infoobject 0Equipment
I am trying to delete some attributes of 0Equipment. When I try to activate the deletion I get the error message: Master data has to be activated before conversion Could anyone advise. Thanks
-
"There is no default application specified" message
I'm not exactly sure if this is the right place for this question, but here goes. I just bought a Wacom Bamboo Fun Tablet, and I'm having trouble installing it. Following the directions, I plugged the tablet into my USB port, inserted the installatio