Missing instruments / changed instruments

HI i am having problems with old sessions locating what i believe to be samples that certain instruments must have needed . so im prompted with a dailogue by logic which asks me to personally locate the files ( at least one of these files was an AAC ) . these files would have been saved in logicexpress 8 , or logic pro 9 . and in some of them the presets / instruments , like ultra beats indie or indie live kit , or the channel preset / instrument called dominator im pretty sure it was in synth leads but i dont see it
i thought i had my preferences to save all project data within the project folder but i guess not but anyway,
*** these projects are on an external HD enclosure and it was basically an extra back up drive *** not much on it
most of my files are on two other drives which would be my last machines two SATA drives one was the system drive and the other was the main audio drive
so all my old logic preferences i dont have access to , nor most of my projects btw the G5 they came from is dead and gone so i cant firewire anything that way .
does logic pro 9 not have as many channel and instrument presets as logic studio ? cuz it seems like my logic 9 doesnt have as many apple presets as I have worked on / used
7 or both maybe there was a drum kit called chill out kit which i liked but upon the next update which i believe was logic express 8 for me it wasnt there i remember this very well as it made me change my default setting for ultrabeat and theres usually only one preset i got to for drums so in logic express 8 it became indie live kit which i dont see in ultrabeat at all either
so i know preseta seem to get left behind but last time my work around for this was to open an old project that i remembered using it in andsaving it in channel strip setting
i cant do that now because my old projects are giving me this error dailogue and when it opens its the right midi but not the right sounds
thanks in advance
really looking for someone who can not only answer this question but who can tell me what the best way to avoid this in the future

the downloaded content seems to have helped .... so i think its ok but maybe a seperate issue now is
esx samples , i since went into my old SYSTEM HD and pulled some ultrabeat and ESX files out of the library
so not sure if its resolved 100 % but it seems to be pretty good

Similar Messages

Always assets links are missing when changing the location.

Hi community: Can you share your ideas with me?
Since adobe muse older versions, asssets files are missing when changing the location or computer. For example develop some project on "desktop" when it move to another location( ex: Another partition or folder with different name), assets says links are missing, we have to relink all assest, is there are any way to fix it? why is that keep happenings? when i design muse templates to sell, it is serious problems to me .
Can you help me, thank you community!

Hi,
Oracle have a tool for precompiling JSP's it's called ojspc
You can then turn JSP compilation off on the server.
Here's a batch file that I use.
Brenden
@echo off
set ORACLE_HOME=C:\[Jdev_install]\jdevstudio10133
if not exist %ORACLE_HOME%\j2ee\home\ojspc.jar goto error
java -Djava.compiler=NONE -Doracle.home=%ORACLE_HOME% -jar %ORACLE_HOME%\j2ee\home\ojspc.jar -extend com.orionserver.http.OrionHttpJspPage yourapp.war
goto end
:error
@echo ERROR: %%ORACLE_HOME%%\j2ee\home\ojspc.jar not found. Please set ORACLE_HOME to point to an OC4J or OracleAS instance and retry.
:end
if "%OS%" == "Windows_NT" endlocal

Missing Instruments in Loops

I am using Soundtrack Pro in Final Cut Studio 2. The instruments are missing from my loops. It seems the other sound effects and music cues are present (although, I've never seen a list of what, precisely is supposed to be included -- anyone know?).
I have done a search of my hard drive. I've combed through the Apple Loops folder. I've searched for "piano" and "cello" -- I've done a search of .caf files (apple loops). I am pretty convinced the instruments aren't on my hard drive.
In a search of this forum, someone spoke of "indexing"; but first gave the advice to return to "setup". That is a little vague for me --(both "indexing" and "setup") -- can anyone give me some instruction on how to use "setup" to try to add the loop files that didn't seem to make it onto my harddrive, during installation of Studio 2? And then how do I "index", if necessary? Thanks much.

Afaik, there's no instruments coming with Soundtrack Pro, only SFXs and Music Beds. The instruments are coming from Garage Band and/or Logic. However, if you didn't uninstall Garage Band, you should have them on your hard drive. If you don't see any instruments in your STP search tab, it's probably because they're not indexed. To index them, go to the Search tab, in the lower-right and click on the Setup... button. A new window will open. Once there, click on the + button and navigate to that folder: Library/Audio/Apple Loops. Select the folder "Apple Loops for Garage Band". STP should then index that folder.

Missing Instruments (horn section, trumpet section)

I've just installed Jam Pack 1. JP 2,3,4 are also installed. Now I've indexed my loop browser and all seems smooth. But there is a problem. I took 'Havana Horns' and 'Havana Trumpets' from my loop browser and put them on tow different AU-tracks. The channel strip settings load, but I hear a bleep instead of horns/trumpets. Now the plugin says 'trumpet section' or 'horn section' missing. I even don't find them in my Garageband menu in the EXS. I've reinstalled it, repaired my disk permissions, re-indexed my loopbrowser etc., but still missing. Anyone an idea what's going wrong? How to find them, or how to reinstall them?

Hi,
The reason I ask the above question, is that, in general, it would be
ideal if I could take solo trumpet samples, such as in this example,
and also use them to construct two trumpets playing in unison,
or three trumpets playing in unison. And, make it sound as close
to "professional" as possible.
In this way, similar techniques can be used for the French Horns and
the trombones.
The upshot being that I would not need to use settings which say,
"Trumpets" or "Horns" or "Trombones", because at this stage,
given my limited resources, I do not necessarily know how many
trumpets are actually playing a given line (for instance, I have
SAM free trumpets and I have Pro Sessions Brass, and they do not
specify how many instruments are playing a given note, and sometimes
it appears that the number of instruments playing gets quite large
when the dynamic for the SAM free trumpets is increased).
And, I do want to know exactly how many brass instruments are playing
and control this, so that when I form chords using a mixture of
brass instruments, with some brass instruments doubling the same
note, that the effect mimics reality as far as chord balance goes. In this,
tool, Logic Pro, and a sufficient set of solo brass samples, could
be used as a neat learning tool (such as making sure that in forte,
two French Horns double a note when the other notes are taken singly
by Trombones and Trumpets, and the like). Although, there are other
concerns with forming brass chords, so Logic Pro potentially becomes
a neat test bed for more unusual set-ups and configurations of complex
brass chords.
Also, of course, I'd like a solo brass instrument to sound more realistic
and "not in your face".
Thanks,
Sys6

Missing instrument sounds after upgrading from '11 to 10

When I upgraded from Garageband '11 to 10, a messaged appeared on my screen asking me if I wanted to download several gigabytes of extra instruments sounds.
Of course I pressed the "Okay" button, and the progress bar showed that the data were downloaded.
But I don't know where those instrument sounds went to, and what name they're under, and where to look for them, because there was no window that appeared after the download to show the location of the new instrument sounds or information saying that they had been installed in Garageband.
My downloads folder on my Mac doesn't show any relevant file or folder from the date when I upgraded.
I already bought Mainstage a year or two ago and downloaded the Jam Packs via Mainstage at that time, and I don't know if those Jam Packs have anything to do the "extra" instrument sounds that I supposedly downloaded as part of my Garageband upgrade.

For example, if the additional content has been installed, you should be seeing these drummers, if you select a Drummer Track:

Colder link missing in Change version of bid invitation.

HI Experts,
There is one problem which we are facing in Bid Invitation Process,
When ever we are changing any already Publish Bid,
The link to the cfolder is getting missed in the change version even though it was created in the initial version.
Version : SRM 5.0
Please help,thanks in the advance.
Thanks & Regards,
Paresh Sojitra.

Hey found the solution.
Its OSS note 001280764.

VISA missing state change on window resize

My code is polling a memory location using VISA (viMoveIn16) over a VXI/VME bus running under Windows NT. This polling is done repeatedly as the memory location changes between values. This normally works quite well and is resistant to processor load. However, should another application be launched or a window resized, the memory location change in value is missed. I have run using NI-Spy and do see the viMoveIn16 commands repeatedly in that log, they just all return the same value (not the one I am looking for). Are there any PC command caching issues that would cause problems on window resize? Is there some reason why the commands would not actually make it to the bus under this scenario? DOesn't the success return
ed from viMoveIn16 indicate that the response has been received? Has anyone experienced a problem similar to this before?

The address space being read is the A16_SPACE. In all of my testing, the failure occurs at a specific location in the code. There are 3 memory reads and 2 of them appear to work correctly. However, the 3rd will catch the resize each time it occurs. All 3 memory reads will work correctly if no resize is encountered. Still looking for the remaining requested data.

Exchange 2013 SP1 cu8 - mssing cmdlet - Get-SendConnector command missing, cannot change smart host port

Hi Everybody,
For some reason my Exchange 2013 SP1 cu8 are missing a bunch of cmdlets.
When i run the exchange powershell and get all the cmdlet command - i noticed all the send and receive connectors are missing.
This all started when i needed to change the smart host port for a client because their internet provider was blocking port 25.
So i did the traditional cmdlet
Get-SendConnector
Set-SendConnector -Indentity "connector name" -Port 551
Both commands i get "The term Get-SendConnector is not recognized as the name of a cmdlet, function, etc"
When i type Get-ExCommand
Any reference to SendConnector and ReceiveConnector are not on the list.
Am I missing somethings? This is a classic example why GUI and cmdlet functions should both be available and not just on cmdlets.
I went on other Exchange 2013 SP1 cu7 servers to see, and they all have the Send and Receive connectors in the cmdlets.
The only difference with this particular setup, is that this is the first Exchange 2013 on-premise installation with Windows 2012 r2 Small Business Essentials. However, i very much doubt the on-premise installation add-on to SBS would cause any issues
to missing cmdlets.
I searched all over the internet and found nothing.
Now my biggest fear is to re-install Exchange and import the mailboxes manually.
Any help is greatly appreciated.
MattLok

Hello
check role asigment for your user:
Get-ManagementRoleAssignment -GetEffectiveUsers | Where { $_.EffectiveUserName -Eq "administrator" }
sorry my english

Missing or changed artwork

Has anyone else noticed some of their album artwork either missing, or it has been entirely changed to an new unrelated album?
Updating the album artwork seems to make no difference.
I have had several instances since upgrading to iTunes 9.

Hey, I am having a similar problem with some imported music from CDs, including Michael Jackson...I clicked "Get Album Artwork" and it gave me some other random artist with the name Michael. And now it says I can't delete it.
Can someone please help me out,
Carla

On certain sites, some lines have the lower half missing. Changing the font or its size does not help. The error does not appear with Iceape or Chromium.

On some sites certain lines appear with the bottom half missing, as if obliterated. Changing the font or its size does not help. The error does not appear with Iceape or Chromium.

I looks that the whole line doesn't fit in the container, so the bottom part is cut off. The usual cause is that a font is used that takes more vertical space, so any increase or changes from the font in what the website prescribes can cause this issue. I've seen web pages that were even affected by changing the minimum font size from none to 1 (!). If you do not have the font installed that the website specifies then Firefox will fallback to another (default) font that may have different dimensions.

Profit centre missing while changing in item code

Dear Guru,
While changing any fields in MM i'm getting profit center is not defined error,if i give any profit center system is saying stock exists for same.
Please guide me how to resplve.
Thanks
Netaji thorat

Dear A profit center is An organizational unit in Accounting that reflects a management-oriented structure of the organization for
the purpose of internal control which is defined in MM costing 1 view and it is a mandatory field.
First check in MM17 table-feild MARC-PRCTR and try to change if won't work then check below notes for solution
Note no: 1351670 and Note no:1106510
Check and Revert.
Cheers
KK

Missing LO changes and creations since one month

Hi
We have some issues with our LO data source and now the issue has been resolved. We need to delete the requests since one month
and reload. We have the following date selections available in the info pakcage Createdon and changed on. Can we load all the
changes and new creation during that time with this selctions without getting duplicates ?
Please advice

Hi,
created on load part is fine as you said and you should do that but
then load the data changed between those two dates
this part will create issue as it will send records to cube which are already present in the cube since they can have created on dates in the past.
created on load part is fine as you said and you should do that.
I mean....same record can have created on and changed values
created on is static and will never change...so a record created in 01.01.1900 will not come in your selection based on created on but it is still present in the cube.
now if the same record got changed in the last one month..i.e. the time when the delta was not working...if you give the changed on selection then it will bring the same record again...and may be if your load goes for two days then for the third time as well if it gets changed on last loading day...
some thing like you loaded for the selection
first you loaded created on 01.01.1900-31.09.2008
then changed on 01.10.2008- 02.12.2008
Now there is one record which as created on date as 01.01.1900...and changed on date as 02.10.2008...and if the old record is not deleted from the cube then it will get doubled. after load based on changed on
also if the load keep on running for two days and is the same record got changed on 03.12.2008 then it will come thrice.
So in any case you will have to delete the history from the cube to load the data correctly.
Thanks
Ajeet

Ringtones show and work under change ringtone, but missing in change alert tones...user created tones

I created ringtones with the Ringtone Converter App. After syncing my iphone 4s (running ios7.1) with itunes and going into my setting/sounds/alert tones the ringtones i created are not there. When I go into settings/sounds/ringtones they are there and they work fine. Is this a problem with ios 7.1 or my phone? any help would be great! Thanks...

In Settings > Sounds > Ringtones > at the top are your custom ringtones.
In Settings > Sounds > Calendar/Reminder Alerts > your custom ringtones should be there when you scroll down.
If not, it means your custom ringtones are too long (> 28 secs.) You have to shorten it.

Jar files missing when changing the desc prop under room maintenance

Hi
I have a requirement to restrict the length of the
description under room template maintenance ---> General Tab --> Description .
I am downloading the com.sap.netweaver.coll.appl.ui.room.par and i done some modification in the Information control class file of com.appl.ui.room.roominformation_api.jar jar file.
I think its no suggestable to made the modification to the orginal par file.
anyone can please help in the above problem. and also let me know whether its the correct way of proceeding.
Thanks in Advance

no update yet. I'm gonna run the tool that is suggested, but I have no other issues with any previous patch. I thought the content of the file I added to my post would have ring a bell to somebody, who had the same problem, but it seems like I was wrong. I'll post once I run the tool suggested in the note
thx all

Some instruments greyed out in garageband

Hi guys , not used Garageband for a while . After downloading update and playing around for a while . I noticed that some of the instruments are greyed out ?
Is there a reason , ie, like they have to be purchased ?

No wonder, you are confused by the version names.
GarageBand '11 is called '11, because it is part of the iLife '11 bundle (with iPhoto '11 and iMovie '11). The latest version number of GarageBand '11 is version 6.0.5, and it is compatible with your earlier OS X 10.8.3 and later.
The newest version, GarageBand 10.0 is only compatible with Mavericks, OS X 10.9 and later.
Seems Mavericks install has , well I don't know , messed something up some where like other apps I've got .
Mavericks has an auto update feature. If you do not change the System Preferences (in the AppStore) settings, it will automatically download and install all updates. You may want to change that to "install system data files and security updates", but not "install updates". This way you will be asked, if you want to install version updates.
" about " I have version 11 ( 6.0.5).
That is o.k., it is the best GarageBand version ever. You only need to get the missing instruments. Do you still have a backup of the old system from the time before the update to Mavericks? It is really a pity, that you wiped the system and made a clean install; that is usually unnecessary with a Mac, unless you are experiencing system wide problems.
Ok I went to purchases and clicked on download and it said , " not availeble for the UK " ? Strange as I downloaded from the app store and it shows in my purchased ?
The AppStore will usually not allow to download the older version, if a newer version is available. But try, if you can still update it. When you launch GarageBand '11 (6.0.5) and click a missing instrument, do you still get the prompt to download the update?

Missing instruments / changed instruments

Similar Messages

Maybe you are looking for