Missing iView templates from creation wizard

I have just installed a test instance of EP based on Netweaver 7.3. When I try to create an SAP transaction iView, the template does not show up in the creation wizard. The template exists in the system, and seems to work in the preview window. How can I get the template to show up in the iView creation wizard?

Hi,
Check standard iView templates exists under Content Administration -> Portal Content-> Templates->iView templates. also check Permissions .
Please refer this forum:[ iView Wizard - Template Selection not getting Displayed|Iview Wizard - Template Selection not getting Displayed;
Hope this helps!!
Regards
Vijay

Similar Messages

Missing Quiz templates from Gallery and Quiz Menu

Looking for the Captivate 5.5 quiz templates. I've looked in the Gallery and the quiz folder is not listed. When I pull down the Quiz Menu in Captivate, the download quiz templates option does not display. Has something changed? Also unable to open templates downloaded from http://www.adobe.com/products/captivate/quiz.html. Recieve "could not open..." message when I attempt to open the cptx file.
Thanks.

Please, to be sure, could you check the version number (Help, About Captivate)?
Those Quiz templates are not available in 5.0, and the fact that you cannot open the templates also would point to you using a previous version.
Are you using the English version?
Lilybiri

Depoyed com.businessobjects.pct.masteriview.par but iview template missing

Hi
I have successfully deployed the com.businessobjects.pct.masteriview.par in Portal
I had taken the PAR file from the installation KIT folder of SAP Integration KIT
I have ONLY deployed the PAR and deployment was successful
I am using SAP EP 7.0 SP21
After the deployment I can not see the BusinessObjects Integration Kit -iView template in the iView creation template
I have refresh the browser, logoff and login number of times, clear the browser cache and history also.
Any suggestion what I need to do to get the BusinessObjects Integration Kit -iView template
Regards
Janak Mehta

Hi,
Do check the below forums for more details:
Do not see BusinessObjects Enterprise Integration Kit - iView template
IView Template Missing
Hope this may help you.
-Noor.

BusinessObjects Portal Integration - iView Template Missing

Hello
I have installed my BusinessObjects for Portal as follows:
1. We already have BI 7.0 on SQL 2005 on BIDEMOSER SERVER.
2. Installed BusinessObjects Enterprise 3.1 , Crystal Reports 2008, SAP GUI 7.1 and SAP Integration Kit on this new server name : BODEMOSER.
3. We already have EP 7.0 on Oracle 10.2 on EPDEMOSER SERVER.
I have installed the BOE 3.1 and Integrated with the BI Server and imported the roles and all the functions are working fine between BO and BI.For Portal Integration i have transferred the masterview file from BODEMO SERVER com.businessobjects.pct.masteriview.par to the EPDEMOSER SERVER.
And it was uploaded in the EPDEMOSER SERVER System Administration--> Support --> uploaded successfully.And I have followed the SSO configuration as per te guide. And values in the Web.xml files are properly as per the guide.
After the uploading the masterview par file i could not able to view the iView template in the System.I have cleaned the cookes and all temp files.
As per the guide I have created an folde name BI_BO and SYstem name as BI_BO_DEMO.Now when I started creating a iView Template by right clicking the System name BI_BO_DEMO and provided the following parameters for each Property Category.
CRYSTAL Enterprise server:
Host Name of Crystal Enterprise Server      :     BODEMOSER.srv.com:8080
Path of Crystal Enterprise Server      :     /SAP
Protocol of Crystal Enterprise Server      :     http
User Management
Authentication Ticket Type     :     SAP Logon Ticket
Logon Method                :     SAPLOGON TICKET
User Mapping Fields
User Mapping Type
Connector
Application Host      :     BIDEMODER.srv.com
Gateway Host      :     BIDEMODER.srv.com
Gateway Service      :     sapgw00
Logical System Name      :     BIDCLNT001
Remote Host Type      :     3
SAP Client           :     001
SAP System ID      :     BID
SAP System Number      :     00
Server Port
SNC Library Path
SNC Mode - Select -01
SNC Name
SNC Partner Name
SNC QOP (Security Level) :     0
System Type      :     SAP_BW
Trace Mode           :     0
System Alias
Created a System Alias as : SAP_BW
And tested the connection where it gives as
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Whether i should install the BO Integration kit in EP portal also or any Portal Inetgration kit is available.
Regards
Bala

Hi,
1. Whether Integration kit for SAP should be installed in EP Server also ( which has been installed in BO server for BI and the SSO for BI and EP STRUSTSSO2 also works fine.
- the portal is acting as the frontend for viewing content and yes there needs to be trust between your portal and your BW system
2. the connector parameter and the iview template object parameter as correct as per the distributed enviorment.
When i checked with portal; admin they asked doubt what should be crystal enterprise server ( BO) and the what is the server should connector parameter should have.
- the Crystal Enterprise parameter do not influence the connector properties and do not lead to the point that the connector settings fail. the Crystal Enterprise parameters are only relevant when viewing SAP BusinessObjects related content.
Make sure you connector settings work even without the Crystal Enterprise parameters first.
ingo

IView Template used when uploading role from R/3 to Portal

Hi all,
I was wondering what iView template is used when you upload a role from R/3 that contains Web Dynpro ABAP applications. I want to change some of the default parameters in the template, more importantly, close the Detailed Navigation panel on the left.
Hope this makes sense,
Thanks,
Kevin

Hi Kevin,
From your explanation, it seems you can see the iViews in Portal role editor under Content Administration.
Under Content Administration
Open the Role for Editing
In the Editor, select the iview and Click on OPEN button.
Now, you should be able to see the properties of the iView in the Editor.
Please check for the property "Code link", which give you the details of the class or template in use.
Hope, this will help
Cheers!!!
Biroj

How do i create a database template from the command line?

Hi,
As part of implementing a backup and recovery strategy for a client (including disaster recovery) I want to automate the creation of a database template From an Existing Database (Structure as well as data) via a script that will run every night.
The background to this is that we will also be using RMAN to take backups of the database concerned but the client does not want to wait while an RMAN backup is restored and so wants an additional level of insurance in the form of a ‘standby’ clone database.
The idea is that nightly we will run a script that creates a database template from the Existing Database (Structure as well as data) and then transfers the 2 files involved e.g. DB_data_included.dbc and DB_data_included.DFB across to a standby server where they can be used to recreate the database in the event of us needing to after e.g. a complete server failure.
So I have a couple of questions about this that I would be very grateful if something could answer for me:
1)     Is it possible? That is, can a database template be created from some utility by supplying a series of parameter=value pairs on the command line?
2)     If yes how do I go about it, what utility do I use (the emca utility?). and what parameters do I need to supply on the command line to create the template?
3)     The intention is that the script to create the template will run in the early hours of the morning when no-one is using the database but what state does the database need to be in when the template creation script runs i.e. up, down, mounted and does the creation of a template affect the state of an already up database i.e. if I kick off the template creation script and the database is up will it switch it into mount mode or anything like that? My concern here is that I want to make sure I understand exactly what is going on so that no users or connected external systems are affected?
Thanks in anticipation of someone being able to guide me on what to do or what documentation to read.
Also if you require any clarification on what i'm asking please post up your query and i'll respond ASAP.
Kind Regards,
George Johnston
OCP 9i DBA

Sybrandb,
Firstly thanks for you reponse.
However, I don’t agree that dbca only creates empty databases otherwise why does the option to create a template from an existing database (structure as well as data) exist in the dbca wizard?
I have performed a test case where I have a created a database template including data on one 10g server. I have then used the files generated to recreate that database on a separate server. When the new database is started it is an exact copy of the original. So it’s not empty at all , it’s exactly what the client wants.
So I don’t agree that I’m gaining zero.
Why is this approach doomed to fail?
There a number of reasons why I “just set up a proper standby database”
1.     Time – I’m on a customer site in a tight engagement where the customer wants maximum value for money. I don’t have standby database skills and the customer isn’t willing to pay for me to learn on the job so please understand the tight circumstances I’m working in.
2.     Availability – As far as I know the client is running 10.2.0.3.0 standard edition. Correct me if I’m wrong but is standby db available in that edition. Where do I look to check V$OPTION.
On the RMAN duplicating a database front it’s an area I haven’t used before but I will take a look at it.
Also please revisit the context of my original posting where I state
The background to this is that we will also be using RMAN to take backups of the database concerned but the client does not want to wait while an RMAN backup is restored and so wants an additional level of insurance in the form of a ‘standby’ clone database.
So please understand that this a quick fix that the client wants developed in the minimum time possible in ADDITION to a full nightly RMAN backup being taken.
In an ideal world I’d have the time to follow best practice but in the real world of on-site customer support I just need to get the job done operating under the customer imposed constraints.
Many Thanks,
George Johnston
OCP 9i DBA

How to get the whole list of Iview Templates

Hi,
when I navigate:
Portal Content -> Content Provided by SAP -> Templates -> Iview Templates
I get a long list of templates including Url Iviews etc
But, when I try to create my own Iview, the list of potential templates is much smaller, mainly including only the SAP related templates, BSP, Query, ITS etc.
Does anyone know how to make the full list of Iview Templates available for the Iview creation wizard ?
Thanks,
Tomas.

Hi Tomas,
which iView templates are offerd within the iView creation wizard is determined by SystemAdmin -- Permissions -- Portal Permissions -- Applications.
Normally, you will have to have SuperAdminRole to see/change these settings.
Hope it helps
Detlev
PS: Please consider to reward points for helpful answers. Thanks in advance!

Query Designer, Execute fails with missing iView (Portal Runtime Error)

Hi,
I have followed all steps to integrate Sap NetWeaver 2004s BI into EP. Checks done so far indicate that all is well between the EP and BI. From within the EP, I can execute the Bex Web Analyser iView and from there I can execute a query on the BI backend. From the BI backend, executing the function module RSWR_RFC_SERVICE_TEST returns the 'BI test service' success message. SSO is working fine as no user/passwords were prompted for. From the trace file, I can see no errors appear but I do see authentication success messages. So far, so good
But, when I execute a query from within the Query Designer, it calls the browser and then errors with the following error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
iView not found: pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex.
Exception id: 10:06_03/03/06_0012_26285450
See the details for the exception ID in the log file
Looking at the trace file, all it tells me is the same, that this iView is not found.
If I logon to the portal and have a look at the iViews within the 'platform-add-ons/bi' folder, I can see the following 4 iViews:
BEx Broadcaster (com.sap.ip.bi.bexbroadcaster)
BEx Portfolio (com.sap.ip.bi.bexportfolio)
BEx Web Analyser (com.sap.ip.bi.bexwebanalyzer)
My Portfolio (com.sap.ip.bi.myportfolio)
I cannot find the missing iView (com.sap.ip.bi.bex).
Any ideas/suggestions would be appreciated.
Thanks in advance.

Hi Ashish,
Thanks for the suggestions. Here is what happened:
1. I have run the deploy and change template again (BIPostInstall). Step 10 failed but I am not too concerned as it does appear that SSO is working both directions. Also, step 13 failed which is the 'Configure Repository Manager'. The error I got here was USER_AUTH_FAILED: User account for logonid "" not found. I am not sure where it is getting the blank userid from.
2. The 'com.sap.ip.bi.business_explorer_showcase' role suggestion looked very promising. I found some doco on it and it does mention this role and when assigned, then you see the Business Explorer tab. I assigned it to all users and to all groups. When I went back into the portal, sure enough, the Business Explorer tab was visible. From within there, I could run query which all worked fine.
BUT, when executing a query from within the BEx Query Designer, I still got the same error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
iView not found: pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex.
Exception id: 11:25_05/03/06_0003_26285450
See the details for the exception ID in the log file
Do you know if this is an actual iView that should exist in the portal content ? If you have this working, can you see this iView in the portal?
3. I had a look at this note (872043) but I could not get the sap download manager to work to get the zip files attached to the note download. If you have it still, could you email it to me ([email protected]) and I will try that. Did you apply the zip file?
I can't find any further trace information on why this missing iView error is happening. I've amended the severity level on the areas which a SAP note detailed but the only information I get is that a missing iView was called.
Function module RSWR_RFC_SERVICE_TEST still works fine and I can execute a query from the Web BEx Analyser iView.
I just can't execute a query from the BEx query designer due to the missing iView.
I don't know whether it is a communication problem even though SSO both directions seem to work OR whether I do have some content missing from my portal.
Regards

No WebDynpro iView Template found in content administrator menu (NW 7.1)

Dear Sir/Madam,
I tried to integrate a sample application in my local portal, but I did not found the webdynpro iview template to accomplish this in the content adminstrator menu.
I found the webdynpro iview template for webdynpro ABAP, but not the on for webdynpro java.
Is this a problem of my installation or are there some prerequisites which I miss?
Many thanks in advance for any input on this.
I am using Netweaver 7.1.
Wolfgang Rothmayer.

Thanks for the quick answer.
My problem is, that I do have the New->iView Menu but then I miss the
Web Dynpro Java application entry
Find below the screen I do have:
<<snip>>
Please wait
Your request is being processed
iView Wizard
Step 1: Template Selection
This wizard guides you through the steps required to create a portal iView based on an existing template. The template list reflects the contents of the cache, and may need refreshing.
Refresh
Choose Template: *
BEx Web Application iView
Crystal Enterprise Report
JDBC Stored Procedure iView
Proxy-to-Portlet iView (WSRP)
Related Services iView
SAP BSP iView
SAP IAC iView
SAP MiniApp iView
SAP RFC iView
SAP Transaction iView
SAP Web Dynpro for ABAP iView
Service Map iView
URL iView
Web Service iView
Workset Map iView
XML iView
Cancel Back Next > Finish
<<end snip>>
What is wrong?
Thanks again.
Regards,
Wolfgang.

Bw report iview template

Hi All,
I edited the properties of BW report iview template which is used for creation of bw report iviews when "role upload" is used.
and it works fine.
now, i created a template of my own bw report iview template and i want to default the "role upload" tool to use my template.. could someone please let me know where should i tweak the code in order to direct to my default template?
thank you

you can pass data between iviews using EPCF
check this how to doc on the same
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ef3b9a90-0201-0010-5ba5-97539aab5abf
Regards
Raja

Error while trying to copy template from another application

Hi,
I am getting this error while trying to copy template from another application:
report error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
This report is located here:
Home-Application Builder-Application 150-Shared Components-Templates-Replace Templates
best regards,

It is usually a permissions issue.. you have read but not write permission. Why it would suddenly change is one of those Apple Mysteries... but it happens.
Open the directory (folder) where your media files are.. and check the permissions.. see if you can fix them.
The problem is the folder on the TC might have lost your ownership and you might not be able to change it.. Apple do not provide anyway to regain permissions because you would need low level access to the TC firmware.
I would just as a matter of course reset the TC to factory and redo its setup.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Do the setup via airport utility using different names.. short, no spaces and pure alphanumerics. Make sure passwords are also pure alphanumeric mixed case and numbers.. 8-20 characters is usually plenty.
Mount the disk in finder and see if you have the same issue.. I am not expecting a change.. but it is worth a try.
No luck you can copy your files off the TC.. wipe it .. and then copy them back.. no bad thing unless you already have a backup of your files at the moment. In which case you can just wipe the TC and copy the files now.

How do you copy the templates from another webstie and use them as your own?

Hi Everyone, I was told that with Dreamweaver it is possible to copy another websites templates? What are the steps in copying another websites template with Dreamweaver? I would like to know I am a newbie when it comes to this program so please make your statement understandable for me, thanks. Also, I am having problems creating a drop down menu for each of my web pages. When I go to highlight a specific box on my homepage I want the dropdown menu to appear vertically and not horizontally. I may have missed something when watching the video tutorials or I didn't quite understand what they meant. Thank you for any information on the series of questions that I have asked in this new thread.

Hi Everyone, I was told that with Dreamweaver it is possible to copy another websites templates? What are the steps in copying another websites template with Dreamweaver?
This is difficult to understand. How are you copying templates from another site?
If you have all the files that make up the template, then it's only a matter of saving all the files to a folder on your hard drive and setting up a site definition pointing to this folder. You then work on the files as usual.
Also, I am having problems creating a drop down menu for each of my web pages. When I go to highlight a specific box on my homepage I want the dropdown menu to appear vertically and not horizontally. I may have missed something when watching the video tutorials or I didn't quite understand what they meant. Thank you for any information on the series of questions that I have asked in this new thread.
Without seeing the page it's difficult to judge what your problem is. If possible, please upload the files to a remote server and provide a link to the page. It's the only way people can help - if they see your page in action.
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap

I bought a magazine template from Pages Toolbox and it's only showing 2 pages out of 10 why?

This morning I bought a template from the Pages Toolbox Kit. It's a new magazine template and when I viewed it before I bought it there were 10 pages. I procedded to buy it. When I opened it to work on it it is only showing the cover and the first page. Where are the missing pages on the template. I have tried everything and it is not working, does anyone know what the problem is....please help thanks!

Pages '09 should still be in your Applications/iWork folder.
Archive/trash Pages 5, after Exporting your files to Pages '09, and rate/review it in the App Store, then get back to work.
Peter

Problem in creating iview template in EP7.0

Hi,
I getting the below message even after creating the iview template in EP7.0
"No templates to display. You are not assigned to any existing templates."
Created through:
content Admin --> portal content --> <folder>new --> iview --> seleting "Portal component - create an iView from a portal component contained in a deployed portal archive (PAR file)" <next> --> seleting "com.sap.portal.appintegrator.sap" <next> --> webdynpro <next> --> finish.
Open object for editing...--> Object is a Template to Yes.
Result :
content Admin --> portal content --> <folder>new --> iview --> seleting "iview template- create an iView from an existing iView template" <next> which displays the same message.
"No templates to display. You are not assigned to any existing templates."
Rgrds,
Suri.

Hi,
do have the right permissions? You can check this using the Permission Editor (Applications, PCD)
What role are you assigned to? Content Administrator? System Administrator or even Super Administrator?
Doesthe same error occur when you're logged in as Super Administrator?
br,
Tobias

Remove Templates from Create Incident From Template Selection

Originally all users had access to all of the templates created, however now that we have been using SCSM for a while the number of templates created has started to grow and make the Create Incident From Template Screen difficult to navigate. I am
trying to limit the number of templates each team sees based on security group, however when I uncheck the templates from the Form Templates section of the User Role, they continue to display for all users. Is there somewhere else I have to go in and
change this that I am missing?

Hi,
Take a look at this thread:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/d0b64ab8-ea5a-4426-968e-77675193473f/hiding-templates-from-console-users-while-still-effectively-using-the-end-user-role?forum=administration
(By default the End User role has access to all templates, and the members of that role is Authenticated Users)
Regards
//Anders
Anders Asp | Lumagate | www.lumagate.com | Sweden | My blog: www.scsm.se

Missing iView templates from creation wizard

Similar Messages

Maybe you are looking for