Missing iWeb Content.

I was working on the iweb project the other night. Published it to .mac and than I logged out.
Today I went to it and all of the sites are there on the left but all the content is gone and it just displays a white blank page.
Nothing is there and I know I did not delete it.
has anyone heard of this?
Thanks
Peter

Did you run the iWeb V 2.0.2 and the iLife Support updates?
If you did, try running Disk Utility and doing a restart.
If nothing else, the introduction of iWeb '08 has taught us to back up our domain file(s).
Go to Home Folder/Library/Application Support/iWeb to copy this file and save it somewhere "safe".
Update this backup every time you make major changes in iWeb and before you install any upgrades.

Similar Messages

Missing BI content datasources

Hi all. I have an issue... I'm trying to activate some BI content datasources, but there are missing a lot of them. Do somebody knows why?
Here are my system status:
SAP_BW 700 0017 SAPKW70017 SAP NetWeaver BI 7.0
BI_CONT 703 0009 SAPKIBIIP9 Business Intelligence Content
Note: It only happens in my BW DEV system. In BW QAS (same installation) there are all the missing datasources.

There have not many BI content datasources in BI.
If you are considering ERP data source, you should check RSA6 in ERP/QAS and Compare it with RSA6 in ERP/DEV.
Transport all datasources in interests from ERP/DEV to ERP/QAS and replicated them to BI/QAS at once, and you will find the missing BI Content data sources.
hope it can help.
regards,
K

Transfer iWeb content to new computer

My G4 finally died, but before I could back up any iWeb files. I have bought a new MacPro now, and need to know if its possible to get it all back from the internet version somehow?

Tim,
I'm sorry....there really isn't anyway to import your
online site back into iWeb for further editing and
publishing. In the future, you should keep a backup
of the Domain file if you can. This is the one file
in which iWeb stores everything about your website.
Best of luck to you....and congratulations on the new
computer! I am officially jealous!
I'm having this same problem-- I uploaded my iweb content to a pre-existing server (not .mac). since then I've had to do an erase and install (long story) and my last backup was a month ago. I downloaded all the iweb files from the site... but there's no way to restore them and get back to work?
my question is:
if I restore my domain file from a backup a month ago will I be able to add files created AFTER the backup? there's no "import" feature in the file menu.
or am I just screwed?
thanks in advance

SP23 missing BI content when processing EWA data

Hello,
In a recently upgraded solman system i am trying to process downloaded EWA data. For this a batch job SM:EXEC SERVICES is scheduled.
This job cancels however with message InfoCube 0SMD_PE2D is not available in version A.
When I search for this infocube in RSA1 i do not find it, so it seems I am missing some content.
Is this true? Or am i doing something wrong here?. Do I need to activate some ehp1 funtionality for this?
Thanks for any help
Tom

>
Tom van Rooyen wrote:
> One error at least was that in SOLMAN_SETUP the BI activation failed because the myself source system was not present at the time. Still the job went technically OK, which is not good practise
Tom,
Could you please open a separate thread in SDN or open a customer message on SV-SMG-INS to discuss the expected behavior within SOLMAN_SETUP.
I would also appreciate to avoid running into issues during EWA processing. Detection should have been possible earlier for users.
Thanks,
Ruediger

IWeb content missing...

I spent a good hour chatting on the Apple chat support on this issue and it isn't resolved.
The problem is simple. When I publish a website, no errors. Nothing shows an error message or problem in any way. However, when I check to see the is as it should be, it routinely is missing content be it filler photos or html flash photo galleries. It is extremely frustrating as this is my professional site and Im pretty close to dropping iWeb and getting a real server that actually works and has better speeds.
Something to note, the files that appear missing are different every time. Sometimes a gallery will load. Other times when you click the link to go to the file, a mobile me error page comes up saying "the account is inactive" which it isnt. This all started happening since the mobile me update 6 days that I saw on the mobile me activity status on the apple website. This has never happened before and the problem is recurring across a variety of web browsers.
Any suggestions would be helpful. I have tried what the apple support site says in deleting the apple.iweb.plist files in the library. It didnt work.
Suggestions? Anyone else having issues?

First before I forget let me suggest that you lengthen the Contact page so that the white at the bottom of the page is not seen. You can do that in the Inspector/Page/Layout pane. The default size is 480 tall. Make that 800 and that should do the trick.
I could find no missing content on your site. Often, however, some of the elements wouldn't load the first time but would after refreshing the page a couple of times. That has to be server slowness
Since this is a commercial site and reliability is important you might consider moving your site to a commercial hosting service. You will find that loading times will be much faster and you'll have better support, actual ear-to-ear support. If you search these forums you will find what I am saying is generally supported.
Also it's against MobileMe's Terms of User to host a commercial web site. I've never hear of that being enforced but in the event you lose sales due to server slowness or being down you would have no legal recourse. Just a heads up on that.
Let me reiterate again, all the sites files are there. For some reason there are times they don't load. It really looks like server issues and not iWeb.

Iweb contents &archives

Hi guys,
I've tried to find something similar, but I miss it. If you can help me, I would like to answer you where are restored the contents generated after the publishing of a blog. Can't I get all the realized Pages, photos and generally, all the work I did? For example, if I need to use and editing the blog from another mac, can I do? Which way? Anyway, have you any similar experience?
Thanks in advance
Paolo

Paolo,
I'm new to this too, but all your iWeb site info will be stored on your iDisk, in the Web folder.
All the info for your site is there, but if you are new to this, I wouldn't mess with anything. That is the quickest possible way to a screwed up site.
It should be possible to edit the blog using iWeb from another of your Macs, but I would certainly have some synching setup between them, possibly by using your iDisk as a means of keeping files current and backed up.
Should be lots of info here somewhere from people who travel and update their blogs from multiple or mobile computers.
Good Luck!

App store icon gone missing/Web Content Filter - Apple Configurator

I am using Apple Configurator to manage the iPads at my school. I changed the settings on my school's profile, within Apple Configurator, so that the App store was not available. The App store icon disappeared and all was good. I decided to change the settings back, to allow the App store, saved the settings and refreshed a group of iPads. The App store icon is still missing and it doesn't appear that my new settings have been applied. I quit Configurator and tried again, but no success. I am running Configurator 1.5 and the ipads are running iOS 7.1.
Also, I have unchecked the "Allow use of You Tube" button because I want You Tube disabled, but Configurator still allows the use of You Tube through Safari. Is there any way to disable the use of You Tube without using the ridiculous "Web Content Filter", that when activated, limits adult content (good), which seems to include a lot of valuable educational sites (bad)? To me the only other option available seems to be to tick "Specific Websites Only" and spend the next year typing in all the possible sites that might have educational merit, ergo, my use of the word 'ridiculous'. Is there something I am missing?

Locate it in the Apps folder and drag it to the dock.

How do i transfer my iweb content to new laptop?

my hard drive on a mac book died - RIP. how do i download the content from my iweb account to my new laptop? the store clerk said that it was possible but doesn't seem obvious to me. i REALLY don't want to lose all my blog site content!

Hi Old Toad,
A really good way to make a backup of the domain file I found it out ALL BY MYSELF (not exactly...)
I tried out varkgirls Automator which actually makes a .zip file of the domain file and puts in a location of your choice... My 500MB site got 430MB in zip...
I didn't get the point of that automator I mean: I can just drag & drop my domain file to my external HD and it would be the same... So I didn't really like it, I'm sorry for that...
BUT Varkgirl also mentions the Mozy stuff... 2GB of free online storage for backup and, at the moment, I really Love her for mentioning that...
I made a backup of my domain file through Mozy (without zipping and so on) now what's the point? The point is I saved 430MB of storage and got additional 1570MB and best part yet to come: when I modify the Domain.sites2 in iWeb and make it backing up again it turns out that Mozy is so intelligent that it finds the pages I modified and uploads only those to Mozy, I don't have to backup the whole 500Megs every time, isn't that great? It's fantastic! Oh yeah and you can tell Mozy to automatically backup every day or once a week or manually backup.
AND "one more thing" (like Jobs said once in a Keynozte pres. I think it was the one he first mentioned the iPhone => big surprise) I MAYBE (I'm NOT sure) could also edit it by restoring it on another computer (of that I'm sure) and then put it back (of that I'm not sure, I think it would need to upload the whole 500MB file)
Well... For people with .Mac that's not quite a revolution, but for those whom, like me, don't have it it is... I think...
I hope someone understood what I meant...
Regards,
Cédric

Missing BI Content Objects

Hello,
I have a question concerning the activation of objects of BI Content (Release 703, Level12). When searching for a 3.x datasource (for example 0PM_OM_OPA_3) in the value help the datasource I want to activate is missing in our development BI system. In the productive system the BI content has the datasource as a possibility to activate. I activated and replicated the datasource in the system. Is there a technical step I have to activate for BI Content or maybe for meta data repository. Any help is appreciated!!!
Thanks a lot!
Aline

The BI Content Standard dont...but the objects you activated...yes you can reactivate the same object...you have a very strange problem....when you select in Datasources 3.X in BI content you dont see this datasource.....i think is a Basis problem.....i have exactly the same BI Content level than you and i can see it in my system....
Sometimes in new installations theres som BI Content problems like this....
Regards

Missing BI content

Our BI system is missing some of the Business content objects. Hence we cannot acivate them and use them. The interesting thing is that we are able to see some object and active them, while few other objects are not showing up in the list to be activated. Has anybody seen this problem before, and we would be curious to know how to solve this.
While searching this post, noticed few suggesting to re-install BI content. Our install logs did not indicate any errors during install.
Any suggestions?
Below is our system details:
Soft comp                           Release                            Level
SAP_ABA          700          0019
SAP_BASIS                          700          0019
PI_BASIS                          2006_1_700                          0009
ST-PI          2008_1_700                          0001
SAP_BW          700          0021
BI_CONT          704          0003

We are having the same issue? I am activating 0SD_C03 Sales Overview. I have successfully activated the cube and datasources but none of the transformations are available to be installed.
We have the following status
SAP_ABA     700     0019     SAPKA70019     Cross-Application Component
SAP_BASIS     700     0019     SAPKB70019     SAP Basis Component
PI_BASIS     2006_1_700     0009     SAPKIPYM09     Basis Plug-In (PI_BASIS) 2006_1_700
ST-PI     2008_1_700     0001     SAPKITLRD1     SAP Solution Tools Plug-In
SAP_BW     700     0021     SAPKW70021     SAP NetWeaver BI 7.0
BI_CONT     704     0003     SAPK-70403INBICONT     Business Intelligence Content
MDM_TECH     555_700     0008     SAPK-57008INMDMTECH     MDM_TECH 555 : Add-On Installation
ST-A/PI     01L_BCO700     0000          -     Servicetools for other App./Netweaver 04

Missing the content when saving HTML from JEditorPane.write(..)

hi,
i m trying to develop html editor using JEditorPane. the document type used is HTMLDocument and HTMLEditorKit. when I try to save using the following function:
try{
FileWriter     w = new FileWriter("doc.html");
//HTMLEditorKit edi = (HTMLEditorKit)editorPane.getEditorKit();
EditorKit edi = editorPane.getEditorKit();
//StyledEditorKit edi = new StyledEditorKit();
//edi.write(w, (StyledDocument)editorPane.getDocument(), 0, editorPane.getDocument().getLength());
editorPane.write(w);
w.close();
}catch(Exception de){System.out.println(de);
}all the contents are missing, only the tags are intact in the output file doc.html. I am using JDK 1.4.2
anybody can help me? thank you very much

here is the code. hehe sorry lol it took me sometime to take off all the function. please try to type something and then save. only the update is saved but the default heading (well in this case, i have replace them all with a "something must be here". thank you very much
// HTMLEditor.java
import javax.swing.*;
import javax.swing.text.*;
import javax.swing.text.html.*;
import java.awt.event.*;
import java.awt.*;
import java.io.*;
public class HTMLEditor extends JFrame{
private JTextComponent textComp;
public static void main(String[] args) {
    HTMLEditor editor = new HTMLEditor();
    editor.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    editor.setVisible(true);
public HTMLEditor() {
    super("Swing Editor");
    textComp = createTextComponent();
    Container content = getContentPane();
    content.add(textComp, BorderLayout.CENTER);
    content.add(createToolBar(), BorderLayout.NORTH);
    setSize(320, 240);
    Template t = new Template((HTMLDocument)(textComp.getDocument()));
    t.setupTemplate();
// Override to create a JEditorPane with the HTMLEditorKit in place
protected JTextComponent createTextComponent() {
    JEditorPane jep = new JEditorPane();
    jep.setEditorKit(new HTMLEditorKit2());
    JEditorPane.registerEditorKitForContentType
     ("text/html", "HTMLEditorKit2");
    return jep;
protected JTextComponent getTextComponent() { return textComp; }
// Add HTML actions to the toolbar
protected JToolBar createToolBar() {
    JToolBar bar = new JToolBar();
    bar.addSeparator();
    bar.add(new StyledEditorKit.BoldAction());
    bar.add(new SaveAction());
    return bar;
class SaveAction extends AbstractAction {
    public SaveAction() {
      super("Save", new ImageIcon("icons/save.gif"));
    // Query user for a filename and attempt to open and write the text
    // components content to the file
    public void actionPerformed(ActionEvent ev) {
      JFileChooser chooser = new JFileChooser();
      if (chooser.showSaveDialog(HTMLEditor.this) !=
          JFileChooser.APPROVE_OPTION)
        return;
      File file = chooser.getSelectedFile();
      if (file == null)
        return;
      FileWriter writer = null;
      try {
        writer = new FileWriter(file);
        textComp.write(writer);
      catch (IOException ex) {
        JOptionPane.showMessageDialog(HTMLEditor.this,
        "File Not Saved", "ERROR", JOptionPane.ERROR_MESSAGE);
      finally {
        if (writer != null) {
          try {
            writer.close();
          } catch (IOException x) {}
class HTMLEditorKit2 extends HTMLEditorKit{
     public Document createDefaultDocument(){
         HTMLDocument doc = new HTMLDocument();;
         doc.setAsynchronousLoadPriority(-1); // load synchronously
         return doc;
class Template{
     HTMLDocument doc;
     StyleContext styles = new StyleContext();
     public Template(HTMLDocument doc){
          this.doc= doc;
          Style def = styles.getStyle(StyleContext.DEFAULT_STYLE);
         Style heading = styles.addStyle("heading", def);
         StyleConstants.setFontFamily(heading, "SansSerif");
         StyleConstants.setBold(heading, true);
         StyleConstants.setAlignment(heading, StyleConstants.ALIGN_CENTER);
         StyleConstants.setSpaceAbove(heading, 10);
         StyleConstants.setSpaceBelow(heading, 10);
         StyleConstants.setFontSize(heading, 18);
     public void setupTemplate(){
          Style s = styles.getStyle("heading");
          try{
               doc.insertString(doc.getLength(), "Something must be here", s);
               doc.insertString(doc.getLength(), "\n", null);
                doc.setLogicalStyle(doc.getLength() - 1, s);
          }catch(Exception e){}
}

Disappearing (missing) delivery content

Symptom
User has composed and saved content and now delivery is empty (has no content).
Cause
User composes Delivery content on the Campaign Dashboard and Saves the Delivery. The "dirty" version of the Delivery is not committed to the database until the Campaign is saved. However, the Save button is not activated at this point.
Next, the user goes into the campaign workflow and opens the Delivery activity there, makes a change, such as entering a subject line or changing the Delivery label and (not noticing that the content is missing) saves the Delivery and saves the workflow. The empty delivery is now committed to the database. When the user next opens the delivery on the campaign dashboard, the content is gone.
Fix
There is not really a fix except to recreate the content.
Preventative
After initially choosing a template and saving the delivery and workflow, only edit the delivery in one place, ideally the Campaign Dashboard.
You can force the Save button to activate by making a change to the Campaign properties, even if you change and change back. Then Save the Campaign.

Looks like my AdBlock Plus plug-in is responsible, in Firefox
at least. Maybe Pithhelmet or some other plug-in in Safari (haven't
troubleshot that yet). Lesson: disabling
plug-ins/extensions/add-ons should always be part of your initial
troubling shooting regimen.

Transfer iWeb contents to another computer & merging Domain.sites2 files.

Hi
I've a MacBook Pro with one set of iWeb files which are published. I've an older MacBook which contains a different set of iWeb files, which are also published. I want to consolidate both these set of iWeb files on one computer. I was reading that I need to transfer the Domain.sites2 file from one computer to the other.
When I do so, I don't want to clobber the original set of contents. How do I merge two Domain.sites2 files?
thanks.

Welcome to the Apple Discussions.
How do I merge two Domain.sites2 files?
You can do that with iWebSites. Just remember to make backup copies of both domain files to be merged in case the merge doesn't go as advertised. I've merged sites before with no problem.
OT

How to Restore iWeb Contents From iDisk?

After a format of my MBP I need to find out how to get the contents of my iWeb site back onto my Mac. Which directory does it belong to on my Mac for iWeb to recognize everything properly?

So basically I'm screwed, right?
Unless you have a backup of your Home folder, otherwise yes
I can't copy the files from my iDisk to my Mac and have iWeb recognize them?
No.
So when I start from scratch, will iWeb erase my current site from my iDisk?
If you give your new site a different name to the old one then NO, if you use a different name you will end up with two sites.
Will

Why do I loose page content from a tab when I switch to another tab? I have to refresh to restore the missing page content.

When I have multiple tabs open, I loose some or most of the page display contents when I leave that tab and then come back to it. I have to either refresh the tab to get the full page display back, OR I can click another tab and then quickly click back to the tab with missing page display. This will restore the display of all page content.

Could you try disabling graphics hardware acceleration? Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
[[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!

Missing iWeb Content.

Similar Messages

Maybe you are looking for