Missing jdeveloper.hs file for local documentation.

I am trying to add the local documentation for JDeveloper. I have downloaded and unzipped the jdev9i_902_doc.zip file. However, I don't see a jdeveloper.hs file in the distribution.
Adding Local Documentation to a Base Installation
To install the documentation set, download jdev9i_902_doc.zip from http://otn.oracle.com/products/jdev. You can install it into JDeveloper directly without any configuration by extracting the files into <jdeveloper_root>.
If you install the documentation into any other location locally, you will need to configure it.
1. In the Tools menu and choose Preferences.
2. In the preferences tree navigate to Documentation.
3. Select the Use Local Documentation radio button.
4. Set the full path to the jdeveloper.hs file.
I can perform steps 1-3 just find, but where is the jdeveloper.hs file? It did not come as part of the jdev9i_902.zip file. If I use my /usr/local/jdeveloper/jdev/doc as the path, then I get no documentation when I select Help. Any ideas about the jdeveloper.hs file?

Craig,
The Install Guide for 9.0.2 was slightly misleading, the jdeveloper.hs file can be found inside the jdeveloper.jar. If you set your path to be /usr/local/jdeveloper/jdev/doc/ohj, then the Help should now work.
The steps have been updated in 9.0.3 to make it a little clearer.
Hope that helps,
Lisa

Similar Messages

  • Missing LIBRFC32.DLL file for 64bit - x64 Windows Server

    Dear Folks,
    I have installed SAP ECC6 with BI7 system on Windows Server 2003 on x64. But I am not able to get data from SAP BW from Crystal Report 2008. I also did  MDX PARSER connection test through t.code SM59. I got list of error messages.
    Logon     Cancel
    Error Details     timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
    Error Details     ERROR: timeout during allocate
    Error Details     LOCATION: SAP-Gateway on host ns2 / sapgw00
    Error Details     DETAIL: no connect of TP mdxsvr from host ns2 after 20 sec
    Error Details     COMPONENT: SAP-Gateway
    Error Details     COUNTER: 798
    Error Details     MODULE: gwr3cpic.c
    Error Details     LINE: 5873
    Error Details     RETURN CODE: 242
    Error Details     VERSION: 2
    I have been read other forums, most probably I am missing LIBRFC32.DLL file for x64 Windows Server. I couldnu2019t find any where this specific file for Windows Server x64 64bit version. It is available on Sap Market place, since I donu2019t have super user rights, I canu2019t download it.
    If any one of you already have this file. Please share with me.
    thanks
    Obaid

    Hello Ingo
    Thanks to read my problem and for your reply, I have already read that SAP Note 1032461,  I  have the same problem as clearly defined in the note, and suggesting to put LIBRFC32.DLL file in <windows-dir>/system32 folder.
    My SAP ECC and BI7 (Kernl 7.00) is installed on 64-bit, x64 Windows Server 2003 Enterprise. I need to download that file from RFC library available on SAP Market place. But, I don't have any super user rights.
    If someone has similar setup and has already that file or could download for me. I need to get that file. I appreciated your kindly help.
    thanks
    Obaid

  • Missing Graphic Styles files for navigation in Muse Tutorial

    I'm on the fourth video tutorial for Muse where graphic styles panel to the nav bar are applied. The files: top nav active and top nav normal over down are missing under the Graphics Panel. Also the files included under the States Panel to apply to the nav bar.  Where can they be downloaded? The tutorial indicates they should be there. Otherwise the Tutorial videos have been working great so far.

    Hello herdywick,
    Just going off the screenshot you provided, I don't actually see your Graphic Styles panel open, I only see the Paragraph Styles panel.  If this is the issue, you can open the Graphic Styles panel by going to Window >> Graphic Styles.  Then you should be able to see the the missing styles as you can in the screenshot I included.
    Also, be sure you opened the right file for this part (the Widgets.muse file.)
    If this was not your issue, please let me know.  Glad to hear that so far you have found the project helpful.
    Thank you,
    Ed Sullivan

  • WWI Generation server installation file for local workstation.

    Hi Experts,
    Can you please provide me the name and path of WWI generation server installation file at SAP marketplace.
    Thanks and Regards
    Kapil

    Dear Kapil
    there is an OSS note to check to get in any case the current WWI version. E.g., check: WWI for Experts
    EHS WWI Installation - Activities in Local SystemWWI for Experts
    and
    OSS notes in Global Label management
    C.B.

  • Error Details Missing in log files for errors on U.I.

    I am working with Weblogic Portal Server 9.2 on windows XP system with oracle 10g database. I have kept separate schema for appGroupspace data-source, and all other tables in main.
    All my collaboration portlets are working but all groupspace portlets are showing error "An error occured while processing your request. Please try again or see your System Administrator".
    All that I can fing in error logs in message "Cant find the primary instance for the portlet [{0}]. The portlet will be served in file mode".
    Is there some way I can find the stack trace of these errors?
    Any clues can be helpful as I'm stuck..

    Hi, I followed all the steps correctly and also the owner of the directory is correct.
    But i have not installed the patches which is listed at the bottom of the link page.
    I had done this on RHEl and i had no problem but now i am getting problem on solaris.

  • Deployment of static html files (for the documentation of the application)

    I'm developing with forms 11g for windows and deploying on linux.
    I want to deploy the help docs of my application, which I've already migrated from hlp to html / css.
    Now, I would like to know where can I deploy that html files to invoke them with web.showdocument (for example).
    To what path is relative the url in the web.showdocument built in?
    Can I jar them as I did with the icons?

    ok, thanks anyway,
    Maybe the problem is with my weblogic configuration, as it is a windows developer workstation.
    I'll send instructions to the sysadmin and try to do it in the linux deployment server.
    I've tried also with WLExcludePathOrMimeType , as read in the manual this
    Note:
    When including any user-defined aliasMatch with the prefix /forms/ in forms.conf, add the directiveWLExcludePathOrMimeType. For example, in Linux, when defining the aliasMatch for /forms/usericons in forms.conf, the directive WLExcludePathOrMimeType is defined as following:
    AliasMatch /forms/usericons/(..*) "/home/userx/myicons/$1" WLExcludePathOrMimeType /forms/usericons/

  • Continual library cache misses in trace file for spatial queries

    Hi all,
    Could somebody explain to me how the SQL parse engine works for spatial queries.
    My understanding is that Oracle creates a hash value for SQL that is parsed with no errors. This hash value is then stored in the library cache ready to be matched against other incoming SQL statements. This provides one of the main reasons for using parametising SQL in languages such as PL/SQL, .Net etc and improves performance on query intensive applications.
    However i have noticed that for spatial, any queries except for refreshes of identical ones already sent, the SQL engines re parses the query. This can take upto 0.2 seconds which is causing a performance bottle neck.
    When looking at the full trace file of a single spatial query using SDO_FILTER with a query window the amount of additional internal queries that are performed is quiet a lot. Are these additional queries included in the total parse time?
    I am wondering why for spatial queries the only way to get a hit in the library cache was to refresh an exact same SQL that had been previously sent?
    Thanks
    Daniel

    Those additional internal queries are not included in the parse time,
    if they are used in the execution time.
    Edited by: yhu on Mar 4, 2011 10:52 AM

  • Missing install.app file for CS6 Design Standard Student version for Windows/Mac

    My version is labeled Windows/Mac but there is no install.app file on the disk. Where can I obtain it?

    KylieSommer wrote:
    So, I checked out the second linnk and it says something about needing an upgrade if I don't have to most recent version? Does that mean I'll need to upgrade to Photoshop CC before I can get a cross grade? Or can I keep the CS6 Extended version?
    Adobe loves confusing people with their marketing copy. Without trying, they often obfuscate the simplest of processes with poor wording.
    The platform swap process only applies to perpetually licensed versions since they're tied to platform specific serial numbers: Mac or Windows, never both ( applies to CS6 and lower). Not CC which is licensed for both Mac and/or Windows via your Adobe ID, so there's no platform swapping necessary.
    What Adobe is trying to say is that you can only swap platforms for the most current perpetually licensed version.
    e.g. CS6 Windows can be transferred to CS6 Mac.
    However, CS5 Windows cannot be transferred to CS5 Mac. You must pay the upgrade cost from CS5 to CS6 and swap platforms at the same time (that's a crossgrade). e.g. CS5 Windows to CS6 Mac is OK.
    Photoshop CC is entirely different. It is available to anyone but only via subscription, even without ever previously owning any Adobe software. There's no upgrading or crossgrading. You simply join up - but keep in mind that you never own the software.
    You don't need CS5 or CS6 to start subscribing to Photoshop CC. There's no connection with your CS5 license other than you can use your CS5 license to get a discounted rate for the first 12 months of CC membership.

  • Missing solutioncenter.msi file for 7210 running windows 7

    Every time I re-boot, I get a prompt that says "can't find SolutionCenter.msi."  HP has a fix here for this BUT...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=mp-77737-1
    I did the download, save and run... but it says this doesn't support anything I have and that I don't need it.  WELL, I darn sure need something  !!!!  I have spent hours trying to get rid of this stupid prompt that appears every day when I boot up. Is there anyone at HP that can help me get rid of it or FIND "solutioncenter.msi'  ??? Your help would be GREATLY appreciated !  Thanks !

    I received an email saying there were new answers, but the page it linked me to had about 100 options (links, etc.), but no answers and no apparent way to navigate to any answers. Glitch? Poor page design? who knows, but another waste of time on the annoying issue. I got rid of the prompts by uninstalling Solution Center, but can't reinstall as HP says it's not available for Windows 7. Well that's what I had all along, so why no longer available? This is SO frustrating !!!

  • Local documentation for coldfusion 9

    Hi,
    I have recently installed a 30 day evaluation copy coldfusion 9 on a RHEL5 64 bit linux server  and we are waiting for a purchase to get a registration code...
    I cannot see any option for local documentation. The "Documentation" link takes me to a page which says "Electronic documentation is not installed on this system.". But when I installed the product I selected "documentation' and it told me it was installing documentation.
    How do I go about getting a local version of the full HTML documentation (yes, I know I can get a PDF file, but that's not what I want).
    cheers,
    Tony

    Hi Tony,
    Open CFadmin page (http://.../cfide/administrator/index.cfm) and login
    Press resources button (top right)
    Select Product Information > Documentation
    Which takes you to this URL:
    http://help.adobe.com/en_US/ColdFusion/9.0/Admin/index.html
    HTH, Carl.

  • Mapping files for pre-defined Encodings?

    Hi there,
    Does anybody know if and where it is possible to download the PDF pre-defined encodings (StandardEncoding, MacRomanEncoding, WinAnsiEncoding, PdfDocEncoding and MacExpertEncoding) as any processable file?
    I found this: http://www.unicode.org/Public/MAPPINGS/VENDORS/ADOBE/ ...but I'm not sure if they are complete and up-to-date.
    Furthermore I'm missing a processable file for MacExpertEncoding at all.
    Anybody?
    Thanks!
    Jan

    When you have a chance, please contact me via email.
    I think that we can accommodate your request, and the discussion will be smoother if we conduct it through email exchanges.
    Thanks...
    -- Ken

  • Image size for LOCAL images

    Is there still a size limit for the ZMG file for local images (not network
    installations)? I have a ZMG that is 2.17g that works fine using the
    network but I get the error message "end of archive" when using a dvd with
    that same image. I found several messages from last year that indicate
    that the zmg can not be greater than 2 gig for local installations. Is
    that still true? I am going to have to span my media?
    TIA,
    Sandy

    Sandy,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Missing pdf maker file

    How do I find missing pdf maker file for Adobe Pro and windows 7?

    Yes.  It is an Adobe Acrobat 8 Professional for Windows Version 8.1.1 and I am using MS Office for windows 7. This system has been working for 2 years and suddenly I get this error message and it no longer works on Word and Excel documents.
    Allan

  • Create the missing server.xml files yourself

    Paula and I created the missing server.xml files ourselves. The script is at the bottom of the post.
    We badly needed the missing server.xml files to work on the customizations and Oracle was unable to solve this problem.
    "I checked on our Automated Release Updates System found that we dont have server.xml that includes PosDelivSchedVO. This confirms that there is no patch available at present to provide you with this file.
    As this is not related to coding issue,Support will not be able to log a bug with Development. You may log an Enhancement Request via Metalink, so that Development would review your requirement and if feasible would include this file at the time of future releases"
    #!/bin/sh
    # This script is used to generate the missing server.xml files for $JAVA_TOP/oracle/apps/pos
    # Usage: server.sh
    # Note: This script has many hardcoded codes and it may generate the wrong server.xml.
    # The manual fixes to the generated server.xml may be need.
    # Check the codes before you use it.
    # It's possible to write a generic version of this script to deal with more issues, like
    # 1. dealing with the Oracle apps patches applied
    # 2. only generates the missing server.xml files automatically
    # 3. can specify the module, like pos or po ..., to generate server.xml.
    # 4. including only the OA Framework objects used.
    # 5. correctly generate the right "encoding"
    # Luke Chi
    APP=pos
    PKG_HEAD=oracle.apps.$APP
    PKG_TAIL=server
    SERVER_FILENAME=server_1.xml
    cd $JAVA_TOP/oracle/apps/$APP
    # for SUB_DIR in asn isp lov product rcv sbd ship administration changeorder jar planning profile registration schema servic
    es suppreg
    for SUB_DIR in asn lov product rcv ship administration planning profile schema services suppreg
    do
    echo $SUB_DIR
    cd $SUB_DIR/server
    PKG=$PKG_HEAD.$SUB_DIR.$PKG_TAIL
    cat << EOF > $SERVER_FILENAME
    <?xml version="1.0" encoding='WINDOWS-1252'?>
    <!DOCTYPE JboPackage SYSTEM "jbo_03_01.dtd">
    <!-- \$Header: server.xml 115.11 2003/03/25 22:31:14 luke ship $ -->
    <JboPackage
    Name="server"
    SeparateXMLFiles="true"
    EOF
    echo " PackageName=\"$PKG\" >" >> $SERVER_FILENAME
    ls *.xml | grep -v server*.xml | while read FILE
    do
    BASENAME=`basename $FILE .xml`
    cat << EOF >> $SERVER_FILENAME
    <Containee
    Name="$BASENAME"
    FullName="$PKG.$BASENAME"
    EOF
    for TYPE in AM EO VL VO AO
    do
    BASENAME_2=`basename $BASENAME $TYPE`
    if [ $BASENAME_2 != $BASENAME ]; then
    case $TYPE in
    AM) echo " ObjectType=\"AppModule\" >" >> $SERVER_FILENAME ;;
    EO) echo " ObjectType=\"Entity\" >" >> $SERVER_FILENAME ;;
    VL) echo " ObjectType=\"ViewLink\" >" >> $SERVER_FILENAME ;;
    VO) echo " ObjectType=\"ViewObject\" >" >> $SERVER_FILENAME ;;
    AO) echo " ObjectType=\"Association\" >" >> $SERVER_FILENAME ;;
    CO) echo " ObjectType=\"Luke_CO\" >" >> $SERVER_FILENAME ;;
    *) echo " ObjectType=\"Luke_UNKNOWN\" >" >> $SERVER_FILENAME ;;
    esac
    break
    fi
    done
    echo " </Containee>" >> $SERVER_FILENAME
    done
    echo "</JboPackage>" >> $SERVER_FILENAME
    grep Luke $SERVER_FILENAME
    if [ $? -eq 0 ]; then
    mv $SERVER_FILENAME server_error.xml
    fi
    pwd
    cd ../..
    done

    We loaded the Oracle seeded BC4J components from mid-tier file system to jdev OA Framework using the server.xml files generated by our Unix script attached in the privious posting above. We ,then did the customizations and successfully deployed them to our test Oracle apps.

  • Where can I find locale file for hu_Hu?

    Hi,
    I have to develop some page in Hungarian but my original flex 4.5 doesn't have the necessary files.
    Here the error when i set "-locale hu_HU" in in flex compiler page :
    Description
    Resource
    Path
    Location
    Type
    unable to open 'C:\Program Files\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1\frameworks\locale\hu_HU'
    MyProject
    Unknown
    Flex Problem
    Could someone tell me where I can find the missing files for the Hungarian language?
    Is my approach correct or I need to do something else?
    Thanks
    Andrea

    dial the customer-service number~

Maybe you are looking for

  • Error in processing class 10

    The scenario is like this u2026u2026u2026 When an employee getting transferred within the company code or to other company code , HRA AND WASHING AND FACTORY allowance are getting doubled, to avoid this we have changed the processing class 10 from 0

  • Download link in Answers

    Hi, When you run a report in Answers, you can have the "Download" link at the bottom of the Page. Which privilege grants the option, so when a user runs a report, he can "Download" it to Excel, PowerPoint etc.? Thanks, rkingmdu

  • Does a nonstandard(created by you) become available for general use?

    if you don't have a standard bapi  available for some transaction you require, can you create your own bapi and use it ? is it allowed ? does such a bapi become available for general use from then on like the standard ones? otherwise who else can use

  • Email a SAPScript Form

    Hi All, Is it possible to send a Sapscript form or a smartform form as an email, We need to be able to email out the form using a function Module. Even if we are able to send it as an attachment , it should be fine, Did not find any function Module t

  • Console - JTextArea

    Hello, I wanted my System.out.print to display all my results in a JTextArea instead of the Console. I got a sample code from Java Developers Almanac and integrated it into my code. It displays some part of the results correctly, but the rest, the fi