Missing .jsx files on my iMac in CS4

I'm very new to Photoshop and have been trying to load some pictures and "Merge to HDR" (which I have done before on here), but that tool is missing in the CS4 window, and if you try to do it from the Bridge it simply says something about the "Merge to HDR.jsx could not be found".  I'm trying to figure out why I could do it before, but now, suddenly, the file is missing or moved.  I can see the file when I go into the CS4 files in Finder, but I'm not sure on where that file is supposed to be for it to load in CS4 and/or in Bridge.  I'm under the impression that in CS4 you should be able to go to File>Automate>Merge to HDR......and then choose your files.  Well, Merge to HDR isn't even there.  All that shows up is "Batch" and "Create Droplet" and "Crop and Straighten Photos".
Any help would be appreciated.

Did you move Photoshop out of the folder?
have you trashed your prefs? This is covered in the FAQs

Similar Messages

  • Help with add file name problem with Photoshop CS4

    Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
    Script follows:
    // this script is another variation of the script addTimeStamp.js that is installed with PS7
    //Check if a document is open
    if ( documents.length > 0 )
    var originalRulerUnits = preferences.rulerUnits;
    preferences.rulerUnits = Units.INCHES;
    try
    var docRef = activeDocument;
    // Create a text layer at the front
    var myLayerRef = docRef.artLayers.add();
    myLayerRef.kind = LayerKind.TEXT;
    myLayerRef.name = "Filename";
    var myTextRef = myLayerRef.textItem;
    //Set your parameters below this line
    //If you wish to show the file extension, change the n to y in the line below, if not use n.
    var ShowExtension = "n";
    // Insert any text to appear before the filename, such as your name and copyright info between the quotes.
    //If you do not want extra text, delete between the quotes (but leave the quotes in).
    var TextBefore = "Lower© ";
    // Insert any text to appear after the filename between the quotes.
    //If you do not want extra text, delete between the quotes (but leave the quotes in).
    var TextAfter = " ";
    // Set font size in Points
    myTextRef.size = 10;
    //Set font - use GetFontName.jsx to get exact name
    myTextRef.font = "Arial";
    //Set text colour in RGB values
    var newColor = new SolidColor();
    newColor.rgb.red = 0;
    newColor.rgb.green = 0;
    newColor.rgb.blue = 0;
    myTextRef.color = newColor;
    // Set the position of the text - percentages from left first, then from top.
    myTextRef.position = new Array( 10, 99);
    // Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
    myLayerRef.blendMode = BlendMode.NORMAL;
    // select opacity in percentage
    myLayerRef.opacity = 100;
    // The following code strips the extension and writes tha text layer. fname = file name only
    di=(docRef.name).indexOf(".");
    fname = (docRef.name).substr(0, di);
    //use extension if set
    if ( ShowExtension == "y" )
    fname = docRef.name
    myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
    catch( e )
    // An error occurred. Restore ruler units, then propagate the error back
    // to the user
    preferences.rulerUnits = originalRulerUnits;
    throw e;
    // Everything went Ok. Restore ruler units
    preferences.rulerUnits = originalRulerUnits;
    else
    alert( "You must have a document open to add the filename!" );

    you might want to try the scripting forum howard:
    http://www.adobeforums.com/webx?13@@.ef7f2cb

  • DW CS5 Missing Related Files Problem

    Hello
    Hoping somebody may be able to help me with a missing related files problem in CS5. I've tried Adobe phone support but they couldn't solve the problem.
    *Some* of my sites (but not all) are not showing all the files related to that page. My pages are typically in .asp vb server model and contain .asp virtual includes (header, nav etc) plus .js and .css linked files
    However DW is only showing the .asp includes as related files and not css or js ones. In design view the CSS is displaying correctly, and all styles appear in the CSS inspector but not showing as a related file in the bar. In CS4 it works fine.
    I've tried deleting the site and recreating it, copying the files to a new folder and setting up a fresh site, creating a new folder and downloading all files from the remote server but no joy. I've also tried refreshing related files. if I click on the filter in the bar it only shows the asp includes and nothing else.
    Any help would be gratefully appreciated, this is a great feature when it works
    Cheers
    MB

    UPDATE:
    Managed to solve this problem, this is a new issue to DW CS5, previous versions do not seem to exhibit this problem
    It occurs when you use site root rather than document relative paths for js/css etc files AND don't have the remote site url (web url) specified in the site setup | local info dialog, or do not have it fully qualified with http://
    ie. ../js/file.js works fine without a remote web url but /js/file.js does not show the related file in the bar unless a remote url is defined.
    Hope that helps anyone else that encounters the same issue!
    MB

  • How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

    How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

    First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
    You can find it here:
    [Ann] Identify Your InDesign File
    If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
    In regards of the script showing a result for InDesign files higher than CS6:
    CS7 = CC v9
    CS8 = CC v10 = CC-2014 or CC2014.1
    Uwe

  • Really slow to open files on new iMac

    Hi
    I've have a new 3.06Mhz 27" iMac (8gb RAM) at work. It's painfully slow when either opening or saving files - ie something requiring the file dialogue box.
    Adobe CS4 being the worst with Dreamweaver & Photoshop taking between 7 and 10 seconds for the dialogue box to open and with Preview or Firefox it's around 5 seconds. This is really annoying and disruptive to work flow. My 3 yr old iMac at home is way faster...
    Any ideas?
    I regularly repair permissions - I do have an external drive plugged in for Time Machine...

    Hi, as a suggestion I would run Onyx:- http://www.apple.com/downloads/macosx/systemdiskutilities/onyx.html
    Then I would go the SMC route, you will need to determine the correct SMC procedure for your model.
    I would also check/reset the Startup Disc (System Preferences)
    Did you add the extra RAM or was it factory fitted? Have you run TechTool?
    Are the Apps running via Rosetta?...L

  • Can't Send Files to my iMac from my Treo 680

    I just bought my Treo 680 and I am able to sync it via bluetooth with Missing Sync and able to send files from my iMac to my Treo but I cannot do it backwards? any ideas?

    Im running Leopard 10,5,1

  • "Adobe InDesign is missing required files. Please reinstall."

    Hi EveryOne !
    "Adobe InDesign is missing required files. Please reinstall. Missing files: \Program Files\Common FIles\Adobe\TypeSupport\...\CP1252.TXT" This is the message I keep receiving on CS5.5 of InDesign.
    I am running InDesign CS5.5 North American, English, with updates on my WinXP SP3 machine. Local copy, no network server. Yes, I might possibly need a newer machine, or a newer desk, or to reinstall WinXP to fix this one problem, but everything other than InDesign CS5.5 still runs great and I feel no compelling reason to make system-wide changes or upgrade until Win8 has been thoroughly tested and new hardware is released and tried and true for that OS.
    So, last year, I received the same message and reinstalling didn't work either. So, I pried everything Adobe off of my computer and reinstalled Adobe PageMaker 7.x. But now I am compelled by my co-workers to use ID, which I have grown to love. I have no desire or $ to upgrade to ID6 but must make use of the ID 5.5. I don't want to uninstall PageMaker as we still use it for legacy projects and it has been a faithful companion to me since it was called Aldus Pagemaker.
    My question: what is causing these messages and why does re-installation not help ? If there is a system problem, why is only CS5.5 affected and not my PageMaker and Quark ? I have searched the web and found only related posts (with no responses relevant to me) for users of Apple products.
    Thank you in advance for any information that you may be able to provide.
    Rafi9327

    See http://forums.adobe.com/message/1318206
    and the new and improved clean tool: CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3

  • HT2473 missing image files

    what is the best way to reconcile the iphoto, aperture, and lightroom catalogues, to ensure that no files have been lost? my macbook pro (2008) quit on me recently and i think that i am missing image files now. also i should say that i am backing up my iphone to the machine and not the cloud.

    i should also say that i am now using a 27 inch imac (2011)

  • Missing Sequence Files ????

    Good Day...
    After opening my fcp file, I receive several "missing sequence file...wont play back properly" messages. I believe I may have deleted these sequence files accidentaly (it was around 12 am...I wasnt as mentally sharp as I normally am). I cannot locate them in the trash folder, autosave file folder, or any other folder on my computer. I read somewhere that I need to "delete all sequence files" and re-render the project...but which folder would contain the sequence files to be erased???
    Thanks in advance for the help.
    Macbook/IMAC   Mac OS X (10.4.9)   sequence files missing

    this is an excerpt taken from another FCP forum I had come across. The questions you asked about the render / sequence files are the same questions I had when I read the thread...
    #1 04-15-2006
    roxane
    DV creator Join Date: Jul 2005
    Posts: 7
    export to quicktime -missing sequnce?
    I had been working on my poor little G3 ibook with an external hard drive. I moved my 45 min project (the whole folder) to the my new G5 dual core, recaptured some of the footage and did some editing. (Wow. That thing is fast!)
    I'm using FCE2. When I try to export the movie to quicktime it tells me there is a sequence file missing and the movie won't play correctly without it. Then it tells me to search for it. I can't find it, hit cancel, try to export again. Now a different sequence file is missing, I do the same process again over and over.
    Do you have any idea why this is happening? What am I doing wrong? How can I prevent/fix this problem?
    roxane
    View Public Profile
    Find all posts by roxane
    #2 04-16-2006
    Pom16/10e
    DV creator Join Date: Nov 2005
    Posts: 489
    erase your render files and re-render everything.
    Macbook/IMAC   Mac OS X (10.4.9)  

  • Missing help files

    I have just bought a new iMac and installed Leopard. However I am having a lot of problems trying to use any of the help tools in Finder. Searches do not bring back any results, and sometimes the window remains blank. Today it displayed the main Mac Help screen, with "What's New in Leopard?" etc., but none of the links work. When I click a link I get an error message saying "Alert Page cannot be found". I guess this could be due to a corrupted install or Help index file, but I have no idea how to fix this. Any suggestions? Many thanks

    In case anyone else searches this forum for "Missing Help Files" here's my experience:
    I'm too chicken to delete files even though I've a good back up, so I renamed each with "old" inserted in the file names which macjack cited above. There are four files he mentioned. "Deleting" the ~/Home/Library/Caches/com.apple.helpui folder didn't produce any visible. I still got the "Alert" message from Mac Help.
    I then went to the set of four ~/Home/Library/Preferences/ files he specified. I found there was no com.apple.helpui.plist file there to delete! Then I "deleted" the remaining three he specified and restarted. Worked like a charm. Mac Help looks to be running as intended.
    Thanks, macjack.
    Terry

  • Missing installaltion file ?

    Hi,
    I am a new member here !(
    This is my problem:
    cpsid_82829s5 : é_[Qz] "Missing installation file," bootstrapper error has occurred.
    Anyone else has got that one... ? Thank you.
    Pierre

    download your installation files,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.4 (win) 5.4 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • I saved a word file onto my imac.  when i go to open file in documents with pages the file is grey and unable to open.  the workable files are highlighted in bold.  is there a way to open this file????

    i saved a word file onto my imac.  when i go to open file in documents with pages the file is grey and unable to open.  the workable files are highlighted in bold.  is there a way to open this file????

    THis is safe for Mac's? Sorry, I have just never heard of this site before.
    And there are literally tens of thousands of sites of which I've not heard, too. Not this one.
    It's legit. There are lots of links in Apple Support Communities to the LibreOffice web site, as well as others that are legitimate open-source developers of options to buying MS Office, such as NeoOffice and OpenOffice. I have Open Office installed on one of my older Macs that can't run Office 2011 and it is rock-solid.
    I've been here too long to start posting bogus urls now.

  • How do I move files from my iMac to my Airport without getting 'AirPort can not be modified' message. File sharing is enabled and I'm not getting asked for a password. Thanks

    How do I move files from my iMac to my Airport without getting 'AirPort can not be modified' message. File sharing is enabled and I'm not getting asked for a password. Thanks

    What OS are you running.. this is usually only a problem in Mavericks.
    If so I recommend you mount the hard disk manually..
    Use Go, Connect to server.
    Type in the IP address if static.. eg
    AFP://10.0.1.1
    Or the name.. but you will have issues unless the name is short, no spaces and pure alphanumeric.. if you are using bad names.. fix it by a full factory reset in airport utility and give it all names that comply to the above.
    Type in
    AFP://TCname.local Where TCname is replaced with the actual name.
    You will be asked for the password the first time which is public unless you changed it.. please remember to save this in the keychain.
    Copy files then to a new directory you create on the TC.. do not place files inside the TM sparsebundle. Nor directly under the main directory.

  • Lost access to my files on my iMac even though - Apple TV seems to recognise that sharing is on.:

    OK I bought an Apple TV when the new version came out recently. I've had no real issues connecting or sharing except from the annoying odd time when sharing dropped and I had to restart iTunes or occasionally - reboot my iMac.
    However in the last 7 days I seem to have lost all contact with my iTunes library. When I turn on Apple TV/Computers I get the message - make sure Sharing is turned on for ....... I turn on iTunes and this message disappears but there's no access to the files. - Nada! My Logitech box has also been unable to access files.
    My iMac seems to be fine but clearly there's something else wrong. I've tried:
    Turning Airport WiFi - off and on.
    Checked my firewall settings
    Verfied and repaired permissions.
    When I first got my iMac aabout a year ago (transferred everything from my old powermac), I kept getting the annoying little message in the middle of my screen saying I needed to turn off my computer. I got in touch with Apple and I was told that the Netbarrier software I had for my old mac was not compatible and to remove it. I did and things have been rosier since
    But while trying to sort this problem out I came accross this little Castle symbol in the top right hand corner of the bar. It relates to the Netbarrier software I thought I'd got rid of. It also seems to be dead. I used cleaner to search for rogue Netbarrier apps or prefs and it didn't find any. And then a day or so after I got a Netbarrier warning flash up.
    I suspect something has happened with security settings somewhere but I can't find anything.
    Hope someone who was good enough to read this novel will be able to help me.
    Cheers
    Jonna

    If you're running iOS 6, go to Settings>iCloud, tap Delete Account, then sign back in with the new ID.  This deletes the account and your iCloud data from your device, but not from iCloud.  Provided you are signing back into the same account, your iCloud data will reappear on your device when you sign back in.
    To avoid losing photo stream photos, save them to your camera roll (if not already there) before deleting the account.  To do this, open your my photo stream album, tap Edit, tap the photos, tap Share, then tap Save to Camera Roll.

  • How can I open Microsoft Word files on my iMac?

    How can I open Microsoft Word files on my iMac?

    You can even use the Pages app that is installed on your computer. Finally you can buy a license of Office for Mac and have Word, Excel, PowerPoint and if you want Outlook too.

Maybe you are looking for