Missing key while using X

Hi!
I miss the "pipe" and the < and the >!  (I wrote them now via hmtlcode.)
What is wrong? On an virtual terminal, they work.

hi,
your keyboard is set up as a 104-keys keyboard, and the <>| key is the 105th. change to 105 and it should work.
also, since i guess you use a german keyboard layout, be sure to choose the "nodeadkeys" variant.

Similar Messages

  • Missing warnings while using softproofing ?

    First, congratulations for all the new or enhanced features !
    Especially the softproofing function is great : the histogramm is now showing what is happening in the destination color space.
    My question is about the warnings on the image while using softproofing : after activating both monitor and destination warnings, and evenif my image is voluntarily completly blown up with highlights, i see very few warnings on the image.
    Am i doing something wrong or the warning function is not working well ?
    Charles, France

    I suspect but could be totally off, that a single color channel will not cause the OOG overlay. You should be able to see this anyway in the normal Histogram (in this case, a blue spike on the end of the Histogram). Again, going out on a limb, I suspect that the profile has to be used to tell LR that all three channels fall outside of gamut, in other words, this isn’t a channel by channel OOG but the entire group. Maybe someone from Adobe can comment.
    I can get the OOG warning to show up with only one or two channels saturating. It appears to have been done correctly. See the screenshot below. The channel info shows only red saturating at 255 in the red-masked OOG area
    Now I can say that I think there is a zoom bug in terms of the OOG in that I’ve seen some overlay colors appear or disappear based on the zoom ratio. Even saw this in Julieanne’s video demo. So you may want to zoom in at 100% (1:1) to get a more accurate OOG preview.
    I am not so sure whether that is a bug or simply a cause of how the Develop preview is generated. LR has to render a low resolution preview and inevitably that involves some downscaling and resharpening (LR has been doing some sharpening on the develop preview for a while now). It is possible that if you are on the edge of being out of gamut, the lower resolution preview can get pushed out of gamut by the sharpening and perhaps by noisy data that is not smoothed away by the noise reduction that would happen at 1:1 but doesn't happen the same way zoomed out at fit or fill.
    P.S. as we found in the thread linked above there are some minor bugs in the softproof notably with proofing for sRGB. So I wouldn't trust it too much yet and just look at it as a preview of how it might or will be implemented in the release.

  • Problem with Chroma/Lume Keys while using Drop Shadows

    I have been using the box now for almost two years and I still am getting problems with green/blue/purples artifacts showing up after a chroma/luma key has been applied with a drop shadow. The artifacts do not show up under a preview but only when the sequence has been rendered. As soon as I take the drop shadow off, the artifacts go away. This is happening with both still graphics with or without Alphas and green/blue screen video. Please help, am I just missing something or is there a work around that I could be using.
    Thanks,
    Alex

    c'mon, Bogie - tell us what you really feel - don't hold back... < </div>
    Oh, Patrick, buddy, I am so totally torqued out of shape today. Don't get me started. Too late. FCP's insane render handler is dropping my files, seemingly at random. The nests, Motion and LiveType material are not rendering in the correct order which makes the effects all wonky.
    I add drop shadows in the last stage and FCP just ain't holding it together. I get glitches. And then I keep getting these Media Offline notices because FCP cant' track the render files that are actually in use in the upstream nests.
    I'll certainly admit a likely a user error. I just don't know what it could be. I've somehow told FCP to destroy its children.
    bogiesan

  • "Root element is missing." - While using Sharepoint List Source in SSIS.

    Hi Team,
    We are trying to import data from sharepoint list using sharepointlist source in SSIS. But the following error pops-up.
    [SP_SRC_SharePointList [67]] Error: System.Xml.XmlException: Root element is missing.
       at System.Xml.XmlTextReaderImpl.Throw(Exception e)
       at System.Xml.XmlTextReaderImpl.ParseDocumentContent()
       at System.Xml.XmlTextReaderImpl.Read()
       at System.Xml.XmlReader.MoveToContent()
       at System.Xml.Linq.XElement.Load(XmlReader reader, LoadOptions options)
       at System.Xml.Linq.XElement.Parse(String text, LoadOptions options)
       at System.Xml.Linq.XElement.Parse(String text)
       at Microsoft.Samples.SqlServer.SSIS.SharePointListAdapters.SharePointListSource.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)
       at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPrimeOutput(IDTSManagedComponentWrapper100 wrapper, Int32 outputs, Int32[] outputIDs, IDTSBuffer100[] buffers, IntPtr ppBufferWirePacket)
    We are unable to debug / move any further. Request your help.
    Thank you.
    Best Regards,
    Gayathri

    It appears that the XML you trying to load does indeed not have the root element.
    E.g.
    <?xml version="1.0" encoding="UTF-8"?>
    <iii>
    <kkk>test</kkk>
    <ppp>000</ppp>
    </iii>
    <iii>
    <kkk>test</kkk>
    <ppp>000</ppp>
    </iii>
    <iii>
    <kkk>test</kkk>
    <ppp>000</ppp>
    </iii>has nonemust be<?xml version="1.0" encoding="UTF-8"?>
    <Root><iii>
    <kkk>test</kkk>
    <ppp>000</ppp>
    </iii>
    <iii>
    <kkk>test</kkk>
    <ppp>000</ppp>
    </iii>
    <iii>
    <kkk>test</kkk>
    <ppp>000</ppp>
    </iii></Root>
    Arthur My Blog

  • How to pass select-options in key while using Read Statement.

    Hi SAP gurus,
    I was using a select stmt. with were clause of Select-options it was working fine,
    now my scenerio is changed i need to read an internal table
    with key of select-options....
    how to read internal table with key S_MATNR (Select-options).

    Hi,
    We can certainly do this.
    We need to loop the internal table with select-options condition.
    Example  :
    LOOP AT ITAB WHERE FIELD =  S_FIELD.
    ENDLOOP.
    This should solve your problem.
    Plz reward if useful.
    Thanks,
    Dhanashri.

  • Problem with function keys while using Terminal to connect to UNIX host

    We are trying to use macs at my office, but we've hit a big roadblock. Our company software runs on a UNIX server, and until now everyone in the company uses either dedicated UNIX terminals, or terminal emulation software in windows. I was thrilled to learn that we could use the terminal in OSX to connect to the server, and it did not take long to get it to work.
    The problem is the function keys. Almost all of the menu options in our company software require the use of the function keys, F1-F10. I was able to access F9 and up by pressing command-F9, etc. but we're now having issues with F3 and F4.
    The computer in question is an intel macbook, and we have been using the fn key of course. The specific problem they showed me was with F3. In the software, it is supposed to lauch an extra menu, but pressing fn-F3 on the macbook results in an error ("number required", which is the message it would normally return if we tried to press return).

    Your problem is two-sided, I think. The first is that you need to set Terminal to send the right escape sequence. This is done with the Inspector (CMD-I) and selecting Keyboard. Get the correct key mapping in there. The other side is to make sure the system isn't intercepting your intended keystroke, so go into System Preferences->Keyboard & Mouse->Kwyboard shortcuts and make sure that the bindings you're using aren't enabled.

  • Get the node key while using button on toolbar

    HI All
    I'm using alv tree (class - CL_GUI_ALV_TREE ) and I want to add a button
    to the toolbar (class - CL_GUI_TOOLBAR ) that User can delete
    a row from the tree .
    assume the user put the cursor on row
    how can i know on which node_key is it ?
    I am using the event function selected for the button ...
    Regards
    Alex

    Alex,
    check this sample program BCALV_TREE_04
    call method g_alv_tree->get_selected_nodes
              changing
                ct_selected_nodes = lt_selected_nodes.
    Thanks
    Bala Duvvuri

  • Insert of data getting missed/duplicated while using Cursor

    Hi all,
    Greeting !!
    I got a strange issue with cursor usage in a SP . Below is the cursor detail.
    Basicially the SP pulls around 2,25,000 records to a temp table(#TMP_ADJ) from there cursor picks and inserts to a physical table(B_SHEET) with some conditions.
    Recently we are facing issues in records getting inserted to B_SHEET , the strange part is if this SP is called in a specific period of time i.e every day this job runs at 2 PM GMT and we encountered some of the records getting missed to insert in to B_SHEET
    table and some time the record is getting duplicated. Around 200-300 records are getting missed.
    we retriggered i.e ran the SP again but this time it was fine, so we confrim that there is no issue with data.
    Later we postponed the same job to get triggered at 3 PM GMT post which we dint encounter the problem.
    Tough this seems to be not a problem with cursor logic, but i need experts help to identify the exact issue what happens at when the job is triggered at 2 PM GMT.
    There has been no change recently done on the SP and the same SP was running fine for past 3-4years.
    1 . What are the checks that needs to be done that affects CURSOR.
     DBA has confirmed that CPU utilization / temp db memory are fine during the period of time. And no issues with Data since the second run of the same SP is fine.
    Thanks.

    If you want suggestions out of the blue, the only recommendation I can give is that you should make sure that the cursor declartion reads:
    DECLARE cur CURSOR STATIC LOCAL FOR
    The default cursor type is dynamic. Dynamic cursors are difficult to understand and rarely perform well.
    Apart from this specific advice, I can only give generic advice since you don't share the code.
    It is a common mistake to believe that just because a piece of code produces the expected result that the code is correct. However, the code may only work as intended because of happenstance. For instance a query may be non-deterministic and produces different
    results because of the query plan.
    Other reasons for "works most of the time, but fails some times" is poor error handling, where you fail to consider errors or handle them inappropriately. In a cursor loop, a common error is also to fail to initiate local variables in the beginning
    of the loop, so that they retain their values from the previous iteration.
    What I like to emphasise once more is that just because the code works most of the time does not mean that it is correct. The fact that it under some circumstances produces incorrect results, carries much more weight. There is at least one flaw in the code
    - you only need to spot it.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Additional local iPad Calendar while using MobileMe

    Hi out there,
    I use only MobileMe to sync all the data. Since a few days my iPad (and even my iPhone), added a local calendar to there iOS. How can I delete that one permanently – it *****…
    Thanks, Chris.

    To make your user library visible, hold down the option key while using the Finder “Go To Folder” command. Enter ~/Library.
    If you prefer to make your user library permanently visible, use the Terminal command found below.
    http://osxdaily.com/2011/07/04/show-library-directory-in-mac-os-x-lion/
    You might want to bookmark the command. I had to use it again after I installed 10.8.2. I have also been informed that if you drag the user library to Finder it will remain visible.
    You can try using iCloud to sync calendars.
    iCloud
    On the iPad try deselecting WiFi sync and then reselecting it. Sort of a reset.

  • Sampling color using "Option" key while Brush tool is selected (CS6)

    I am used to "Option" clicking on a color, while using the Brush tool, to set the foreground color. In CS6, it is updating the background color instead, even though the "Info" panel clearly says "Click to choose new foreground color" when I hold down the Option key. What setting am I missing?
    The foreground color is the active color in the color swatches.
    Manually selecting the Eyedropper tool and option-clicking, updates the foreground color. Simply clicking, updates the background color

    I think that Conroy has given you the solution, but one can also toggle the Foreground and Background Colors with the X key. I assume that is the same (unless one has remapped it) on the Mac.
    Good luck,
    Hunt

  • Dropdown values are missing while using the function module KCD_EXCEL_OLE_TO_INT_CONVERT

    Hi all,
    when i am trying to upload the excel template by using the function module " KCD_EXCEL_OLE_TO_INT_CONVERT" to an internal table some field values are missing.
    i am using the function module " KCD_EXCEL_OLE_TO_INT_CONVERT"  and i am uploading an excel template and downloading that excel data into an internal table but some field values are missing while uploading the excel template and i found that the field which contains the drop down list values those values are missing.
    And also when i am uploading the excel template by using the function module" KCD_EXCEL_OLE_TO_INT_CONVERT"  when i am coming out of this function module one pop up is coming. how can i avoid this popup, can any one please provide me the solution thanks in advance.
    FYI...it is showing the below popup screen ..
    Thanks,
    Koushik

    hi Feiyun,
    below is the code(highlighted in bold)and after coming out of the function module i am getting popup and also the drop down values are missing.
    DATA: ls_control         TYPE zsfi_fiupload_control,
             ls_header          TYPE zsfi_fiupload_header_v13,
             ls_item            TYPE zsfi_fiupload_item_v13,
             ls_trailer         TYPE zsfi_fiupload_control,
             l_line_count       LIKE zsfi_fiupload_control-rec_count,
             l_current_curr     TYPE kcde_cells-value,
             l_current_postdate TYPE kcde_cells-value,
             l_current_compcode TYPE kcde_cells-value,
             l_currentrow       TYPE kcde_cells-row,
             l_filename         LIKE rlgrap-filename.
       DATA: BEGIN OF lt_intern OCCURS 0.
               INCLUDE STRUCTURE  kcde_cells.
       DATA: END OF lt_intern.
       DATA: BEGIN OF lt_items OCCURS 0,
               a TYPE kcde_cells-value,
               b TYPE kcde_cells-value,
               c TYPE kcde_cells-value,
               d TYPE kcde_cells-value,
               e TYPE kcde_cells-value,
               f TYPE kcde_cells-value,
               g TYPE kcde_cells-value,
               h TYPE kcde_cells-value,
               i TYPE kcde_cells-value,
               j TYPE kcde_cells-value,
               k TYPE kcde_cells-value,
               l TYPE kcde_cells-value,
               m TYPE kcde_cells-value,
               n TYPE kcde_cells-value,
               o TYPE kcde_cells-value,
               p TYPE kcde_cells-value,
               q TYPE kcde_cells-value,
               r TYPE kcde_cells-value,
               s TYPE kcde_cells-value,
               t TYPE kcde_cells-value,
               u TYPE kcde_cells-value,
               v TYPE kcde_cells-value,
               w TYPE kcde_cells-value,
               x TYPE kcde_cells-value,
               y TYPE kcde_cells-value,
               z TYPE kcde_cells-value,
               aa TYPE kcde_cells-value,
               ab TYPE kcde_cells-value,
               ac TYPE kcde_cells-value,
               ad TYPE kcde_cells-value,
               ae TYPE kcde_cells-value,
               af TYPE kcde_cells-value,
               ag TYPE kcde_cells-value,
               ah TYPE kcde_cells-value,
               ai TYPE kcde_cells-value,
               AJ TYPE KCDE_CELLS-VALUE,
               AK TYPE KCDE_CELLS-VALUE,
               END OF lt_items.
       l_filename = p_flpath.
    * the file must be an xls file, not xlsx or comma seperated
       IF p_flpath NS '.xls' AND p_flpath NS '.XLS'.
         MESSAGE i261(zfi).
         g_error = 'X'.
         EXIT.
       ENDIF.
    * upload excel file to a generic table
       CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
         EXPORTING
           filename                = l_filename
           i_begin_col             = 1
           i_begin_row             = 1
           i_end_col               = 150
           i_end_row               = 65000
         TABLES
           intern                  = lt_intern
         EXCEPTIONS
           inconsistent_parameters = 1
           upload_ole              = 2
           OTHERS                  = 3.
       IF sy-subrc <> 0.
         MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
       ENDIF.
    * validate that the format is in the restatement format
    *  this is the only template to have the ledger group in cell G-2
    **  READ TABLE lt_intern WITH KEY row = '0002' col = '0007'.
    **  IF sy-subrc <> 0 OR lt_intern-value IS INITIAL.
    **    MESSAGE i260(zfi).
    **    g_error = 'X'.
    **    EXIT.
    **  ENDIF.
    * create control record values
       ls_control-rec_type = 'C'.
       ls_control-global_id = 'GLU-03000'.
       ls_control-local_id = ''.
       ls_control-rec_count = ''.
       CONCATENATE sy-datum sy-uzeit INTO ls_control-date.
       ls_control-version = '12'.
       ls_control-email = ''.
       ls_control-eor = 'X'.
       ls_trailer = ls_control.
    * open output file and add the control record
       OPEN DATASET p_unixfilename FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
       TRANSFER ls_control TO p_unixfilename.
    * create header record values, will be transfered to file in the item loop
       ls_header-rec_type = 'H'.
       READ TABLE lt_intern WITH KEY row = '0017' col = '0003'.
       IF sy-subrc = 0.
         ls_header-header_txt = lt_intern-value.
       ENDIF.
       READ TABLE lt_intern WITH key row = '0020' col = '0002'.
       IF sy-subrc = 0.
         ls_header-comp_code = lt_intern-value.
       ENDIF.
    ************doc date
       READ TABLE lt_intern WITH KEY row = '0011' col = '0003'.
       IF sy-subrc = 0.
         ls_header-pstng_date = lt_intern-value.
       ENDIF.
    ************posting date
         ls_header-doc_date = sy-datum.
       READ TABLE lt_intern WITH KEY row = '0009' col = '0003'.
       IF sy-subrc = 0.
         ls_header-doc_type = lt_intern-value.
       ENDIF.
       READ TABLE lt_intern WITH KEY row = '0014' col = '0003'.
       IF sy-subrc = 0.
         ls_header-ref_doc_no = lt_intern-value.
       ENDIF.
    ************currency moved to line items
         READ TABLE lt_intern WITH KEY row = '0020' col = '0001'.
       IF sy-subrc = 0.
       ls_header-currency = lt_intern-value.
       ENDIF.
       ls_header-trans_date = ''.
       READ TABLE lt_intern WITH KEY row = '0010' col = '0003'.
       IF sy-subrc = 0.
         ls_header-period = lt_intern-value.
       ENDIF.
       READ TABLE lt_intern WITH KEY row = '0006' col = '0003'.
       IF sy-subrc = 0.
         ls_header-reason_rev = lt_intern-value.
       ENDIF.
       READ TABLE lt_intern WITH KEY row = '0007' col = '0003'.
       IF sy-subrc = 0.
         ls_header-rev_date = lt_intern-value.
       ENDIF.
    *  READ TABLE lt_intern WITH KEY row = '0002' col = '0007'.
    *  IF sy-subrc = 0.
         ls_header-ledger_grp = ''.
    *  ENDIF.
    *  READ TABLE lt_intern WITH KEY row = '0013' col = '0013'.
    *  IF sy-subrc = 0.
         ls_header-exch_rate = ''.
    *  ENDIF.
       READ TABLE lt_intern WITH KEY row = '0008' col = '0003'.
       IF sy-subrc = 0.
         ls_header-calc_tax = lt_intern-value.
       ENDIF.
       ls_header-eor = 'X'.
    * loop at the line items and append them to a table with multiple columns
       LOOP AT lt_intern WHERE row GE 20.
         IF l_currentrow <> lt_intern-row AND l_currentrow IS NOT INITIAL.
           APPEND lt_items.
           CLEAR lt_items.
         ENDIF.
         l_currentrow = lt_intern-row.
         CASE lt_intern-col.
           WHEN '0001'. lt_items-a = lt_intern-value.
           WHEN '0002'. lt_items-b = lt_intern-value.
           WHEN '0003'. lt_items-c = lt_intern-value.
           WHEN '0004'. lt_items-d = lt_intern-value.
           WHEN '0005'. lt_items-e = lt_intern-value.
           WHEN '0006'. lt_items-f = lt_intern-value.
           WHEN '0007'. lt_items-g = lt_intern-value.
           WHEN '0008'. lt_items-h = lt_intern-value.
           WHEN '0009'. lt_items-i = lt_intern-value.
           WHEN '0010'. lt_items-j = lt_intern-value.
           WHEN '0011'. lt_items-k = lt_intern-value.
           WHEN '0012'. lt_items-l = lt_intern-value.
           WHEN '0013'. lt_items-m = lt_intern-value.
           WHEN '0014'. lt_items-n = lt_intern-value.
           WHEN '0015'. lt_items-o = lt_intern-value.
           WHEN '0016'. lt_items-p = lt_intern-value.
           WHEN '0017'. lt_items-q = lt_intern-value.
           WHEN '0018'. lt_items-r = lt_intern-value.
           WHEN '0019'. lt_items-s = lt_intern-value.
           WHEN '0020'. lt_items-t = lt_intern-value.
           WHEN '0021'. lt_items-u = lt_intern-value.
           WHEN '0022'. lt_items-v = lt_intern-value.
           WHEN '0023'. lt_items-w = lt_intern-value.
           WHEN '0024'. lt_items-x = lt_intern-value.
           WHEN '0025'. lt_items-y = lt_intern-value.
           WHEN '0026'. lt_items-z = lt_intern-value.
           WHEN '0027'. lt_items-aa = lt_intern-value.
           WHEN '0028'. lt_items-ab = lt_intern-value.
           WHEN '0029'. lt_items-ac = lt_intern-value.
           WHEN '0030'. lt_items-ad = lt_intern-value.
           WHEN '0031'. lt_items-ae = lt_intern-value.
           WHEN '0032'. lt_items-af = lt_intern-value.
           WHEN '0033'. lt_items-ag = lt_intern-value.
           WHEN '0034'. lt_items-ah = lt_intern-value.
           WHEN '0035'. lt_items-ai = lt_intern-value.
           when '0036'. lt_items-aj = lt_intern-value.
           when '0037'. lt_items-ak = lt_intern-value.
         ENDCASE.
       ENDLOOP.
       APPEND lt_items.
    * sort rows by the post date, comp code, curr.
    *  SORT lt_items BY ah a ai.
    * loop at the items, creating a header record if the comp code, curr. or post date changes
       LOOP AT lt_items.
         ls_item-rec_type = 'I'.
         ls_item-post_key = lt_items-c.   "lt_items-b.
         IF lt_items-c GE '20' AND lt_items-c LE '39'.
           ls_item-vendor_no = lt_items-d.
         ELSEIF lt_items-c GE '0' AND lt_items-c LE '19'.
           ls_item-customer = lt_items-d.
         ELSEIF lt_items-c EQ '70' AND lt_items-c EQ '75'.
           ls_item-asset = lt_items-d.
         ELSE.
           ls_item-gl_account = lt_items-d.
         ENDIF.
         ls_item-asset_type = lt_items-m. "lt_items-l.
         ls_item-trans_type = lt_items-n. "lt_items-m.
         ls_item-print_flag = ''.
         ls_item-item_text = lt_items-j. "lt_items-i.
         ls_item-comp_code = lt_items-b. "lt_items-a.
         ls_item-bus_area = ''.
         ls_item-alloc_nmbr = lt_items-l. "lt_items-k.
         ls_item-tax_code = lt_items-q. "lt_items-p.
         ls_item-taxjurcode = lt_items-r. "lt_items-q.
         ls_item-profit_ctr = lt_items-g. "lt_items-f.
         ls_item-costcenter = lt_items-h. "lt_items-g.
         ls_item-orderid = lt_items-ac. "lt_items-ab.
         ls_item-wbs = lt_items-i. "lt_items-h.
         ls_item-trade_id = lt_items-o. "lt_items-n.
         ls_item-part_prctr = lt_items-p. "lt_items-o.
         ls_item-material = lt_items-t. "lt_items-s.
         ls_item-salesorg = lt_items-aa. "lt_items-z.
         ls_item-distr_chan = lt_items-ab. "lt_items-aa.
         ls_item-pmnttrms = ''.
         ls_item-pmtmthd = ''.
         ls_item-pmtmthsupl = ''.
         ls_item-alt_payee = ''.
         REPLACE ALL OCCURRENCES OF '(' IN lt_items-e WITH ''.
         REPLACE ALL OCCURRENCES OF ')' IN lt_items-e WITH ''.
         ls_item-amt_doccur = lt_items-e. "lt_items-d
         REPLACE ALL OCCURRENCES OF '(' IN lt_items-f WITH ''.
         REPLACE ALL OCCURRENCES OF ')' IN lt_items-f WITH ''.
         ls_item-loc_amt = lt_items-f. "lt_items-e
         ls_item-loc  = lt_items-k. "lt_items-j.
         ls_item-sas_revtype = lt_items-s. "lt_items-r.
         ls_item-rev_type = lt_items-u. "lt_items-t.
         ls_item-rev_chnl = lt_items-v. "lt_items-u.
         ls_item-bill_to = lt_items-x. "lt_items-w.
         ls_item-payer = lt_items-z. "lt_items-y.
         ls_item-ship_to = lt_items-y.
         ls_item-tax_amnt = lt_items-x.
         ls_item-func_area = ''.
         ls_item-expend_date = lt_items-ae. "lt_items-ad.
         ls_item-wtax_code = lt_items-af. "lt_items-ae.
         ls_item-wtax_base = lt_items-ag. "lt_items-af.
         ls_item-wtax_amount = lt_items-ah. "lt_items-ag.
         ls_item-payment_block = ''.
         ls_item-grp_amt = ''.
         ls_item-anc_amt = ''.
         ls_item-permit_payee = ''.
         ls_item-value_date = ''.
         ls_item-pernr   = ''.
         ls_item-legacy1 = ''.
         ls_item-legacy2 = ''.
         ls_item-legacy3 = ''.
         ls_item-legacy4 = ''.
         ls_item-legacy5 = ''.
         ls_item-legacy6 = ''.
         ls_item-legacy7 = ''.
         ls_item-legacy8 = ''.
         ls_item-legacy9 = ''.
         ls_item-legacy10 = ''.
         ls_item-eor = 'X'.
         TRANSLATE lt_items-ai TO UPPER CASE.
         TRANSLATE lt_items-b TO UPPER CASE.
         TRANSLATE lt_items-a TO UPPER CASE.
         TRANSLATE lt_items-aj TO UPPER CASE.
         IF l_current_curr <> lt_items-a "lt_items-ai
           OR l_current_postdate <> ls_header-pstng_date "lt_items-aj
           OR l_current_compcode <> lt_items-b.
           l_current_curr = lt_items-a.
           l_current_postdate = ls_header-pstng_date. "lt_items-aj.
           l_current_compcode = lt_items-b.
           ls_header-comp_code = l_current_compcode.
           ls_header-currency = l_current_curr.
           ls_header-pstng_date = l_current_postdate.
           ls_header-doc_date = l_current_postdate.
           TRANSFER ls_header TO p_unixfilename.
           l_line_count = l_line_count + 1.
         ENDIF.
         TRANSFER ls_item TO p_unixfilename.
         l_line_count = l_line_count + 1.
       ENDLOOP.
       ls_trailer-rec_type = 'T'.
       ls_trailer-rec_count = l_line_count.
       TRANSFER ls_trailer TO p_unixfilename.
       CLOSE DATASET p_unixfilename.
    * change the format to fixed format for the remainder of the load program
       p_fixed = 'X'.
       p_rstmnt = ''.
    Thanks,
    Koushik

  • Aluminium keyboard: arrow keys stuck in scroll mode while using excel?

    Posting this question for a colleague - he has a 24" iMac and is getting annoyed because the arrow keys no longer move from cell to cell while using Excel but rather they scroll the page. I took a quick look at his keyboard hoping to quickly solve the problem by finding some sort of lock key that was accidently pressed...but no joy. Anyone have thoughts on what's causing this sudden change in behaviour?
    tia,
    N

    I believe Shift-F14 is the keyboard combination to enable/disable scroll lock.

  • Missing sentences in a forwarded mail while using firefox but not happening in IE or Chrome

    I am forwarding a earlier email to the same person. While forwarding 3 sentences were missing while using FIREFOX. But when I tried to do the same with IE or Chrome , it was working fine.

    Hi,
    A Code 10 error is generated in Device Manager in one of the following situations:
    Device Manager can't start the device.
    One of the drivers that the device needs does not start.
    Device Manager has insufficient information to recognize the error that is bubbled up by the device driver.
    Note In this situation, the Code 10 error can be a very generic message that indicates some kind of unspecified driver or device problem.
    For more information regarding Code 10 errors, please see:
    Fix: "This device cannot start" Code 10 error in Device Manager in Windows
    Please try to update the device drivers with the error code 10. More troubleshooting steps please refer to the KB article.
    Best regards
    Michael Shao
    TechNet Community Support

  • ORA-02266: unique/primary keys - error while using Exchange Partition

    Hi All,
    While using EXCHANGE PARTITION statement as given below,
    ALTER TABLE SOURCE_TABLE EXCHANGE PARTITION PRT_EXCG_PRTN WITH TABLE TARGET_TABLE
    we are getting this error,
    ORA-02266: unique/primary keys in table referenced by enabled foreign keys
    However, there are no tables have foreign keys referring this TARGET_TABLE, we checked this by referring
    USER_CONSTRAINTS table, it has only primary key and NOT NULL constraints.
    SELECT * FROM USER_CONSTRAINTS WHERE TABLE_NAME like 'TARGET_TABLE';
    We are using the following version,
    Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
    PL/SQL Release 9.2.0.6.0 - Production
    CORE     9.2.0.6.0     Production
    TNS for IBM/AIX RISC System/6000: Version 9.2.0.6.0 - Production
    NLSRTL Version 9.2.0.6.0 - Production
    Is it due to any error in our end or it could be a bug in Oracle and should we go for any patch updation ?
    Please guide us to resolve this error as soon as possible, thank you.
    Regards,
    Deva

    *** Duplicate Post ***
    Please Ignore.

  • HT201178 when using apple bluetooth keyboard with iPad, hitting the enter/return key while typing in iMessage only adds another line not 'send' the message? is there a setting to change that somewhere?

    when using apple bluetooth keyboard with iPad, hitting the enter/return key while typing in iMessage only adds another line not 'send' the message? is there a setting to change that somewhere?

    Everywhere that I've checked it is not possible to do this. I would like to even do this using the vkb. I hate having to stretch my thumb all the way up just to send a message. It's messaging, not a report or email. Seems backwards. Hopefully some day Apple can add this option.

Maybe you are looking for