Missing keyboard shortcuts on Mac Air 2013

I just got a used clean Mac Book Air 2013. None of the keyboard shortcuts are working. I've gone to system preferences to restore the default, but that doesn't work. Any ideas? Thanks!

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

Similar Messages

  • Is 4gb ram is enough for mac air 2013?

    Hi. I'm gone upgrade mac air 2013 to 256gb ssd with i5 processor. But my question is 4gb ram enough? I will just do web browsing, imovie, iphoto, movie, document work and parallel only for autocad. (money is my concern!) thx for ur advise, apprieciate.

    Prefer to have 8GB RAM installed.
    AutoCAD  demands more resources.
    http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=15802859&linkID =15839490
    http://www.parallels.com/products/desktop/

  • Transferring keyboard shortcuts between Mac and Windows

    I need to migrate users from Mac (CS 5.5) to Windows 7 (CS 6). I have tried to transfer a user's custom keyboard shortcut set by copying the .indk file to the appropriate folder on the PC, and although it shows up in the list, when I try to select the set I get an error saying it is in the wrong format or the file could be damaged. Is there a way of transferring keyboard shortcuts between Mac and Windows?

    Shortcut sets seem to be human-readable text files, so you could try making a copy and doing some editing, changing cmd to ctrl and opt to alt, and change the platform value in the first line to "win" though I can't make any promise it will work.
    There are also some known problems trying to migrate legacy sets into newer versions of ID since CS5, I think.

  • I have deleted iPhoto that came with my new mac air 2013, how can i get it back again?

    I have deleted Iphoto that came with my new Mac Air 2013, how can I get that back... Well, I know, I should have done it, but I've not set up the time machine yet... Many thanks

    Okay, look under Purchases:

  • InDesign 5.5 Missing keyboard shortcuts

    I'm using ID5.5 and my keyboard shortcuts aren't listed next to my commands, and the ones I know by heart aren't working. It's like they're missing. My teacher thinks I'm stupid and I can't find how to fix this for a MAC. I've seen a post about Windows, but I am working on a mac.

    You saw the keyboard shortcut if are the one that you saved?
    See in Menu > Edit > Keyboard shortcut (image below):
    Wagner

  • Missing keyboard shortcut "Command + "

    Hello,
    with Mac OS 10.6.x I miss the keyboard shortcut Command + to toggle between different windows, i.e. in Mozilla Firefox to switch to another open window. It only works in finder but in no other application like Coda or Photoshop or something like this.
    Can anybody tell me what´s wrong?

    Oh sorry, the editor deleted the character I mean ... it´s Command + "<"Z" (english keyboard layout) or "Y" (german keyboard layout).

  • Need to use a specific windows keyboard shortcut on Mac

    I need to use a specific keyboard shortcut for a program that I am running (via Parallels) but the same keyboard shortcut is used in OS X to take a screen shot of a window via dashboard, which takes precedence over the command I am attempting to use.
    The keyboard shortcut in "Windows-Speak" is Shift-Ctrl-W.  What are my options here? Can I deactivate that shortcut in OS X?

    CrossOver is a program that lets you run some Windows software withhout installing Windows. The emphasis is on some. At their website Crossover rates the supported software on a scale from Bronze to Gold - if the program you need to run is supported at the Gold standard you will probably be okay. Silver and Bronze ratings means the rated Windows software will run but with glitches or even missing functionality. (Silver being better support than Bronze, obviously.)
    Virtualization solutions such as VirtualBox (or the more capable and feature laden Parallels Desktop and VMWare Fusion) let you install another operating system (and software) to use at the same time as you use your Mac software. It is a nifty solution and while virtualization isn't quite as fast as running an OS totally native (BootCamp) the speed hit isn't all that significant and affects graphics rendering more than anything else.
    I'm an IT instructor and software trainer and about 80% of this work involves Windows software. I do it using a Mac computer running Windows in Parallels Desktop. If it weren't for the Apple logo on my notebook no one would know I'm using a Mac - and the notebook in virtualization feels faster than the cheap Dell computers we use.

  • How to set mac KEYBOARD shortcuts (for mac OS and windows OS)

    i am having a bit of an issue.
    i run windows 7 and mac os on the same computer on different hard drives in this computer. i also have a "mac" keyboard. i am not sure how this may be different from a "windows keyboard" but the point is i need to use this keyboard because it matches the one on my laptop which is a mac.
    when i switch to windows on this machine i always end up deleting information because the CMD + X and CMD + V cut and paste shortcuts on Mac OS are not the same in windows. windows requires (currently) CTRL + X and CTRL + V. so when i got to cut and paste in windows CTRL + X (this is my habitual way of working) and then i run a CTRL + V i end up writing /over/ the text i selected with a "x" and i end up pasting /over/ the text i selected to paste over with a "v". this is because instead of running a cut and paste, this set of shortcuts in windows simply enters "x" and "y" respectively since the shortcut is not active.
    does anyone know where i set these in windows OS and in mac OS?
    also, does anyone know if it is possible to set how many UNDOS i can do in either of these OS's or to know how many i can in fact undo?
    THANKS
    long story background:
    1. while i may move to a windows keyboard on the computer i am using (because the mac keyboards these days end up losing keys and they end up very wobbly) i cannot do this for the laptop machine so this may not make a lot of sense if i end up also running windows on the laptop which is my intention at some point.
    2. CTRL + X is a very long stretch on the mac keyboard so rather than switching mac shortcuts to accommodate windows shortcuts i am thinking to switch windows shortcuts to mac ATM.
    3. this is no small issue! i just went to copy and paste this text so i could save it for myself in order to explain to someone else and i ended up overwriting with a "c". if i had not thought fast and remembered to UNDO by hitting CTRL - X and not CMD - X i might have lost all my work.

    You don't necessarily need netcfg to get networking. But I used it before for my wireless on my laptop, so I just used the same on my desktop too. Also if you want to do things like this its easier rather than have to go digging around with macspoof and what not. your netcfg eth0 file could be something like
    PRE_UP='ip link set eth0 address XX:XX:XX:XX:XX:XX'
    CONNECTION='ethernet'
    DESCRIPTION='A basic dhcp ethernet connection using iproute'
    INTERFACE='eth0'
    IP='dhcp'
    If you use a different interface then obviously, you need to change it accordingly

  • TS4303 thunderbolt not supported in Mac Air 2013

    Mac Air 11" 2013 is connected to Airport Extreme but connection rate is only 50MB/s . That is no difference when I connected only to WiFi.I am using a Cat5E cable. Please advice.

    An this has what to do with an iMac??? You are posting on the Intel iMac forum.

  • Missing keyboard shortcuts

    Hello,
    I am currently using Final Cut Pro X 10.1.2 on my macbook pro with OS X 10.9.4. It has been a few times that I realized that some keyboard shortcuts are missing from the «default» shortcuts. For example, I'm trying to do a multicam editing, and I saw that the shortcuts for changing camera angles are the number corresponding to the camera (1, 2, 3, 4...). I tried it, but it didn't work, so I went to the customizing interface for the keyboard shortcuts, clicked on the 1 and saw that there is no shortcuts assigned to that key (but it is in the command list)...  Maybe I just don't understand how this interface works, but it's still not working and I don't want to enter everything manually, as there are lots of missing shortcuts. I wondered if I could download a file of the shortcuts that I could import to Final Cut? Or maybe I have to activate those shortcuts in a certain way?
    (I am using the keyboard of my macbook, which is french canadian, if that has anything to do with the problem)

    Yes, I think the numbers are in the same place and yes, I am cutting in a project.
    Here is the screen shot:
    And here is what I see when I want to customize the shortcuts for «1» (there's nothing ):

  • Preview.app missing keyboard Shortcut

    Anyone know how to bring back the print selected page keyboard shortcut in preview? It used to be command+shift+p

    Did you try  command-P

  • HT1343 How about keyboard shortcuts for Mac Book Air, which has a different keyboard?

    Mac Book Air has a diffent keyboard layout and some of the shortcuts aren't applicable. Please rectify.

    Hi Lanny,
    I understant that, but if I complain to Apple on the feedback, nothing will happen for a million years.
    Here things are visible to the wide Apple Users and hopefully get sorted.
    Apple representatives are welcome to reply and post that the shortkey list is updated to include all the diferent Apple Keyboards.
    Thanks,
    LF

  • Using the 'Missing Sync' program on Mac Air OSX 10.8.2 & BB Bold

    After reading about the impossibility of syncing Mac Calendars to my BB Bold, I came across the software called Missing Sync.
    Before I spent $29.95, does anyone on the board here have any experience of this program?
    Thanks
    Tess

    Answer to self!
    Xerox has just released an Update "Phaser_3140-3155_OS_10-8_print_Instaler_v5.0.0" this has resolved all my problems and may be usefull for some other people. Go to Website "http://www.support.xerox.com/support/phaser-3140" for download.

  • I am having trouble attaching my wifi keyboard to my mac air.

    Aloha
    When I press the pair key  nothing happens???
    Thanks
    Dan Page

    Hi Alicia!
    So that the Community can help you better, we will need to know the computer operating system you're using (Windows XP/Vista/7/8 or Mac 10.x). Any other error messages or details you'd like to give will also help the Community better understand your issue.
    Thanks and have a great day!

  • HT1529 The black band which connect the screen and the keyboard of my mac air is broken. Will it get fixed for free by the apple company?  I wonder because I bought this computer for only 6 months!

    Can someone plz help me with this problem?

    They will probably replace it for free unless they determine it is something not covered by the warranty.  Accidental damage such as caused by dropping something usually isn't covered by the standard warranty.
    Make sure you back up your files.  Although this has nothing to do with the hard drive you might wish to remove any sensitive files first, and have copies of all your files just toi be sure.
    You posted on the Tiger system forum where nobody runs a MacBook Air.  In future you should check you are posting in the correct forum because that will get you the fastest and most experienced responses for your issue.  I requested your post be relocated.

Maybe you are looking for

  • Adobe Illustrator CS5 Setup Mistake (Clicked on "provide a serial number")

    Hi everyone, The instructions for installing Adobe Illustrator CS5 told me to to chose the option "Install this product as a trial" instead of "Provide a serial number" when I get to the "Enter a Serial Number" step.  I don't know why I was so stupid

  • IPod touch and Facebook App

    Last night I deleted cookies in Safari and now I when I choose to use the Facebook app, I get the msg cookies are not enabled. How do I resolve this? Thank you

  • How to generate output in PO item level?

    Hi All,          There's special requirement from users.  They wan't to generate output for each item of purchase order. But the messages are only defined in PO header. Are there any solutions for these requirement? Moveover is there any way to gener

  • What is a like profile in SCM?

    I search my APO book and SDN, I cannot find the exact definition of like profiles Would you please explain what is  a like  profile? Thanks!

  • Update table .... indexes ?

    I am attempting to update , because of the addition of a new attribute, a table with about 13mil records. There is a primary key which is a combination of two attributes. The primary key combination forms the unique index on the table which is the on