Missing keywords after deleting clips?

I'm having a problem in iMovie '11 with clips where I have assigned keywords to parts of them. Whenever I reject a part of such a clip (not necessarily overlapping with the tagged parts) and 'move rejected to trash', all keyword assignments in the remaining clip are gone!
Because of this, I just lost half a day of work, tagging all my holiday videos with about 10 different keywords.
Am I doing something wrong, is this a known issue and/or does anyone know how to solve this?

I'm having the same issue. Did you find a solution?
I also lose the marking of favorite for the same clip. It will also delete the 0.2 section of a clip when I only rejected part of it.

Similar Messages

Missing Files After Deleting OS X System Folder from Disk

This is my first post; I'll try to be brief.
I got a new computer (G5 dual) and so wanted to "clean up" my G4 tower for my wife's use. I had three hard drives in the G4, one of which was an 80 GB drive with OS X (Tiger, I think) on it. Another drive had OS 9 on it.
I bought a 300 GB drive for the G4 and put Tiger on that drive. Then I moved OS 9 to the 80 GB drive. In the process, far as I can remember, I deleted only the OS X System Folder from the 80 GB drive (not any prominent folders that appear in "fancy" form on the left side of a Finder Window); so, one OS on each drive.
I deleted a number of files, and moved a number of files, in the process of doing my "clean up." Those files that I *moved* I can now find, no problem. But I left some files in the Movies folder (the "fancy" folder that is on the left side of a Finder Window in OS X) on the 80 GB, and those I now cannot find. My concern is that perhaps, in deleting the OS X System Folder from that drive I somehow either 1) also deleted the Movies Folder (inside the Home Folder inside the Users Folder) by the very act of deleting the System Folder (which seems unlikely to me) or 2) I managed to "hide" the Movies Folder by deleting the OS X System Folder.
I have far more available space on the 80 GB drive than I would expect to see, given the steps I had to take to get some files onto CDs, etc. (I needed all the space I could free up, as I recall). So, this suggests the missing files just might still be there. Spotlight can't see them; booting in OS 9 and using Sherlock doesn't reveal them....
Have I inadvertantly removed these files, or is there hope that they can be restored to life? A related question: If I did delete these files, is there a way to "un-delete" them at this stage?)
Many thanks for any thought anyone may have.
Bob ("rsimon")
G4 Tower (pre-mirror) Mac OS X (10.4.3) Also have G5 dual

If you did actually delete your valuable files, you want to stop using that computer as soon as possible. You'd have a good chance to recover deleted files, unless they're already overwritten by other data.
Boot your G4 in Firewire Target Disk Mode (hold down "T" at startup) and connect it to your new G5 using a Firewire cable.
The drives inside the G4 will mount as removable media, so you can browse them and try to find your movies folder. It should be located at
harddrive/user/username/movies.
You can use a utility like WhatSize to find large, (maybe hidden) files.
Post back, in case your data has disappeared and you need a file recovery tool.
Good luck.

I am unable to clear my recent call list. Both the 'missed' and 'all' numbers appear even after deleting. It was happening on ios 7.0.4 and is present on 7.0.5. Any help.

I am unable to clear my recent call list. Both the 'missed' and 'all' numbers appear even after deleting. It was happening on ios 7.0.4 and is present on 7.0.5. Any help.

No.
You got 2 more basic troubleshooting steps left before you make an appointment with the Apple genius bar for an evaluation:
Restore from backup
Restore as new
http://support.apple.com/kb/HT1414

Using Final Cut Pro, I am unable to close a gap after deleting a clip?

Using Final Cut Pro, I am unable to close a gap after deleting a clip?

PPress the Delete key next to =. Not the forward delete key on the extended keyboard.

Files missing from desktop after deleting a user profile that was created on there.

I downloaded and installed firefox and it asked me to create a user profile, but it could not save in the default location. I chose to create the profile on the desktop as a test and that worked. However, after deleting that user profile, all of the items on my desktop were removed and cannot be located. The files are not in my trashbin and when I do a search, it says the file cannot be located. I have Windows 7.

You shouldn't create a profile and choose an existing folder.<br />
You should always specify an empty folder and if you didn't do that then you should never remove the files when you remove such a profile because all files in it will be removed and not just the files created by Firefox.
See:
*http://kb.mozillazine.org/Files_created_on_startup

SAP Upgrade ORA-00905: missing keyword

Dear experts,
we have a very urgent SAP upgrade case,
From SAP R/3 470 SR1 110 to ECC 6 EHP4 SPS09
source system have three languages ZH EN DE,it's a
non-unicode system,before SAP upgrade,From rscpinst, i delete language
German and change contry code to CN,
(China). Then there is only code page 8400,T-code: I18N check ok,now we have
a error during upgrade,i was already replace the kernel to 385 version(640_Rel Non-unicode,TP and R3trans alreay the latest version) repeat the SHADOW_IMPORT_UPG1 step but still fail,log result as follow,the SAPKLZHSR1EHP4ERP6F8.GS1 has incomplete conversion
but the previous log file I.E SAPKLZHSR1EHP4ERP6F7.GS1 also have incomplete conversion but no ORA-00905,we only have codepage 8400 and Non-unicode but why the log mention 4103 it's a Unicode code page,thanks a lot!
SHDUPGIMP1.ELG
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SHADOW IMPORT ERRORS and RETURN CODE in SAPKLZHSR1EHP4ERP6F8.GS1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW000 SQL error 905 occured: ORA-00905: missing keyword
2EETW000 SQL error 905 occured: ORA-00905: missing keyword
1 ETP111 exit code           : "8"
SAPKLZHSR1EHP4ERP6F8.GS1
4 ETW000 22 entries for RSMPTEXTS~ imported (SAPLMCB2                                1*).
4 ETW000   1 entry for TLIBT~ updated (1MCB2).
3WETW000 language = '1', converted from codepage 4103 to codepage 8400, incomplete conversion due to invalid chars: '41004e0041004c005900530045005f00440055005200430048004600dc004800520045004e0020002000200020002000200020002000200020002000' -> 'ANALYSE_DURCHF#HREN           '
4 ETW000   0 entries from FUNCT~ (1ANALYSE_DURCHF#HREN           %) deleted.
3WETW000 language = '1', converted from codepage 4103 to codepage 8400, incomplete conversion due to invalid chars: '41004e0041004c005900530045005f00440055005200430048004600dc004800520045004e0020002000200020002000200020002000200020002000' -> 'ANALYSE_DURCHF#HREN           '
4 ETW000   0 entries from FUNCT~ (1ANALYSE_DURCHF#HREN           %) deleted.
3WETW000 language = '1', converted from codepage 4103 to codepage 8400, incomplete conversion due to invalid chars: '41004e0041004c005900530045005f00440055005200430048004600dc004800520045004e0020002000200020002000200020002000200020002000' -> 'ANALYSE_DURCHF#HREN           '
4 ETW000   0 entries from FUNCT~ (1ANALYSE_DURCHF#HREN           %) deleted.
3WETW000 language = '1', converted from codepage 4103 to codepage 8400, incomplete conversion due to invalid chars: '41004e0041004c005900530045005f00440055005200430048004600dc004800520045004e0020002000200020002000200020002000200020002000' -> 'ANALYSE_DURCHF#HREN           '
4 ETW000   0 entries from TFTIT~ (1ANALYSE_DURCHF#HREN           ) deleted.
3WETW000 language = '1', converted from codepage 4103 to codepage 8400, incomplete conversion due to invalid chars: '41004e0041004c005900530045005f00440055005200430048004600dc004800520045004e0020002000200020002000200020002000200020002000' -> 'ANALYSE_DURCHF#HREN           '
4 ETW000   0 entries from TFTIT~ (1ANALYSE_DURCHF#HREN           ) deleted.
3WETW000 language = '1', converted from codepage 4103 to codepage 8400, incomplete conversion due to invalid chars: '41004e0041004c005900530045005f00440055005200430048004600dc004800520045004e0020002000200020002000200020002000200020002000' -> 'ANALYSE_DURCHF#HREN           '
4 ETW000   0 entries from TFTIT~ (1ANALYSE_DURCHF#HREN           ) deleted.
4 ETW000 [     dev trc,00000] Wed Sep 7 10:41:04 2011                                             815387003 1338.120210
4 ETW000 [     dev trc,00000]     OCIStmtExecute() failed with -1=OCI_ERROR                              10 1338.120220
4 ETW000 [     dev trc,00000]     SQL error 905:                                                          6 1338.120226
4 ETW000 [    dbsloci.,00000] *** ERROR => Error 905 in stmt_fetch() from oci_execute_stmt(), orpc=0
4 ETW000                                                                                12 1338.120238
4 ETW000 [    dbsloci.,00000] *** ERROR => ORA-905 occurred when executing SQL stmt (parse error offset=110)
4 ETW000                                                                                9 1338.120247
4 ETW000 [     dev trc,00000] sc_p=0x140f618,no=67,idc_p=(nil),con=0,act=1,slen=149,smax=256,#vars=4,stmt=0x1783c10,table=
4 ETW000                                                                                17 1338.120264
4 ETW000 [     dev trc,00000] SELECT ID,OBJECT,LANGU,TYP,VERSION FROM "DOKIL~" WHERE (LANGU IN ( :A0 )) AND ID = :A1 AND OBJECT BE\
4 ETW000                                                                                9 1338.120273
4 ETW000 [     dev trc,00000] TWEEN :A2 ANALYSE#_DURCHF#REN           % :A3 #?;                         5 1338.120278
4 ETW000 [     dev trc,00000] sc_p=0x140f618,no=67,idc_p=(nil),con=0,act=1,slen=149,smax=256,#vars=4,stmt=0x1783c10,table=
4 ETW000                                                                                11 1338.120289
4 ETW000 [     dev trc,00000] Dumping DBSL stmt. cache:                                                  5 1338.120294
4 ETW000 [     dev trc,00000] prep=0,lit=0,nsql=1,lobret=0,xop=1,dbcnt=0,upsh=(nil),stmtp=0x1784758,rtc=0
4 ETW000                                                                                29 1338.120323
4 ETW000 [     dev trc,00000] IN : cols=4,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=4294967295,rsize=28,vmax=32,bound=1,iobuf_p=0x1493510,vda_p=0x1784db0
4 ETW000                                                                                10 1338.120333
4 ETW000 [     dev trc,00000]       lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0                 6 1338.120339
4 ETW000 [     dev trc,00000] SELECT ID,OBJECT,LANGU,TYP,VERSION FROM "DOKIL~" WHERE (LANGU IN ( :A0 )) AND ID = :A1 AND OBJECT BE\
4 ETW000                                                                                7 1338.120346
4 ETW000 [     dev trc,00000] TWEEN :A2 ANALYSE#_DURCHF#REN           % :A3 #?;                         5 1338.120351
4 ETW000 [    dbds    ,00596] ***LOG BY2=>sql error 905        performing FET        [dbds#2 @ 596]
4 ETW000                                                                                14 1338.120365
4 ETW000 [    dbds    ,00596] ***LOG BY0=>ORA-00905: missing keyword [dbds#2 @ 596]                      6 1338.120371
2EETW000 SQL error 905 occured: ORA-00905: missing keyword
4 ETW000   0 entries from FUNCT~ (1MCB_GRAPHIC_DAILY             %) deleted.
4 ETW000   0 entries from FUNCT~ (%MCB_GRAPHIC_DAILY             %) deleted.
4 ETW000   0 entries from TFTIT~ (1MCB_GRAPHIC_DAILY             ) deleted.
4 ETW000   0 entries from TFTIT~ (%MCB_GRAPHIC_DAILY             ) deleted.
SAPKLZHSR1EHP4ERP6F7.GS1
4 ETW000   1 entry for LDBNT~ imported (1FTI_TR_PL_CF        *).
4 ETW000   0 d /   1 i /   0 u /   0 =   0% ucf LDBT~
4 ETW000   1 entry for LDBT~ imported (1FTI_TR_PL_CF).
4 ETW000   1 entry for TRDIRT~ inserted (SAPDBFTI_TR_POSITIONS                   1*).
3WETW000 some text was mutilated during conversion from unicode to ascii in language '1'. This is the result: 'SP_JOTC          ###############'
3WETW000 language = '1', converted from codepage 4103 to codepage 8400, incomplete conversion due to invalid chars: '530050005f004a004f005400430020002000200020002000200020002000200020003a571659a44e13664d881f75a74ec1542000200020002000200020002000' -> 'SP_JOTC          ###############'
4 ETW000 REPOT1SAPDBFTI_TR_POSITIONS                    A replaced.
4 ETW000   0 entries from D020T~ (SAPDBFTI_TR_POSITIONS                   %) deleted.
4 ETW000   0 entries from D021T~ (SAPDBFTI_TR_POSITIONS                   %) deleted.
4 ETW000   0 entries from TRDIRT~ (DBFTI_TR_POSITIONSFXXX                  1%) deleted.
4 ETW000   0 entries from TRDIRT~ (DBFTI_TR_POSITIONSNXXX                  1%) deleted.
4 ETW000   0 entries from TRDIRT~ (DBFTI_TR_POSITIONSN001                  1%) deleted.
4 ETW000   0 entries from TRDIRT~ (DBFTI_TR_POSITIONSSEL                   1%) deleted.
4 ETW000   0 entries from TRDIRT~ (DBFTI_TR_POSITIONSSXXX                  1%) deleted.
4 ETW000   0 entries from TRDIRT~ (DBFTI_TR_POSITIONSTOP                   1%) deleted.
SAPup.ECO
Phase SHADOW_IMPORT_UPG1:
BLOCKED SIGNALS: ''
SAPup> Starting subprocess 2865 at 20110907101845
ENV: DIR_LIBRARY=/usr/sap/upgrade/upg_dir/abap/exenew
ENV: LD_LIBRARY_PATH=/usr/sap/upgrade/upg_dir/abap/exenew:/usr/sap/upgrade/upg_dir/jvm/jre/lib/amd64/server:/usr/sap/upgrade/upg_dir/jvm/jre/lib/amd64:/usr/sap/upgrade/upg_dir/jvm/jre/../lib/amd64:/usr/sap/GS1/SYS/exe/run:/oracle/GS1/102_64/lib
ENV: NLS_LANG=AMERICAN_AMERICA.WE8DEC
ENV: ORACLE_BASE=/oracle
ENV: ORACLE_HOME=/oracle/GS1/102_64
ENV: ORACLE_PSRV=GS1
ENV: ORACLE_SID=GS1
ENV: ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data
ENV: PATH=/usr/sap/upgrade/upg_dir/abap/exenew:/oracle/GS1/102_64/bin:.:/home/gs1adm:/usr/sap/GS1/SYS/exe/run:/opt/gcc295/bin:/opt/gnome/bin:/usr/games:/usr/bin/X11:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/usr/global_lx/bin:/usr/global/bin
ENV: SAPSYSTEMNAME=GS1
ENV: auth_shadow_upgrade=0
ENV: dbms_type=ORA
ENV: dbs_ora_schema=SAPDAT
ENV: dbs_ora_tnsname=GS1
EXECUTING /usr/sap/upgrade/upg_dir/abap/exenew/tp (/usr/sap/upgrade/upg_dir/abap/exenew/tp) pf=/usr/sap/upgrade/upg_dir/abap/bin/SHDUPGIMP1.TPP put GS1
This is /usr/sap/upgrade/upg_dir/abap/exenew/tp version 376.03.38 (release 701)
This is /usr/sap/upgrade/upg_dir/abap/exenew/R3trans version 6.14 (release 701 - 03.06.11 - 17:57:00).
2EETW000 SQL error 905 occured: ORA-00905: missing keyword
2EETW000 SQL error 905 occured: ORA-00905: missing keyword
/usr/sap/upgrade/upg_dir/abap/exenew/R3trans finished (0008).
ERROR: stopping on error 8 during SHADOW IMPORT
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter DBCONFPATH is no longer used.
stopping on error 8 during SHADOW IMPORT
tp returncode summary:
TOOLS: Highest return code of single steps was: 8
WARNS: Highest tp internal warning was: 0118
tp finished with return code: 8
meaning:
A tool used by tp produced errors
Process with ID 2865 terminated with status 8
B.R
Lance.
Edited by: Yen on Sep 7, 2011 8:11 AM

Hello,
Following upg master was used -
51036889_1 BS 7 SR1 Upgrade Master 1/2
51036889_2 BS 7 SR1 Upgrade Master 2/2
And the kernel dvd used was NUC -
51036767_4 BS 7 SR1 Kernel 7.01
After successful upgrade to ecc6 EhP4, Unicode conversion was done later with UC kernel DVD (during IMPORT)
Thanks

Impdp triggers always give error ORA-04071:missing BEFORE, AFTER or INSTEAD

Hello,
I am using 11g impdp to create a test system.
I use this cmd to import
impdp 'SYS/xxxxx@PWRFUN AS SYSDBA' dumpfile=PWRPROD.DMP logfile=PWRFUNimportPROD.log SCHEMAS=pwrplant TABLE_EXISTS_ACTION=REPLACE
Then I get this error for all the triggers
ORA-39083: Object type TRIGGER failed to create with error:
ORA-04071: missing BEFORE, AFTER or INSTEAD OF keyword
Failing sql is:
CREATE TRIGGER "PWRPLANT"."APPROVAL_STEPS_HISTORY" PS_HISTORY
BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
FOR EACH ROW
BEGIN    :new.user_id := USER;    :new.time_stamp := SYSDATE; END;
As you can see, the trigger does contain the word "before".
When I remove " "PWRPLANT"."APPROVAL_STEPS_HISTORY" " and run the trigger below, it compiles correctly. Why is this, and how do I make my impdp to run correctly?
CREATE TRIGGER PS_HISTORY
BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
FOR EACH ROW
BEGIN    :new.user_id := USER;    :new.time_stamp := SYSDATE; END;

same error, thanks for your attemp
Error starting at line 1 in command:
CREATE TRIGGER "PWRPLANT"."APPROVAL_STEPS_HISTORY" PS_HISTORY
BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
REFERENCING new AS new
FOR EACH ROW
BEGIN :new.user_id := USER; :new.time_stamp := SYSDATE; END;
Error report:
ORA-04071: missing BEFORE, AFTER or INSTEAD OF keyword
04071. 00000 - "missing BEFORE, AFTER or INSTEAD OF keyword"
*Cause:    The trigger statement is missing the BEFORE/AFTER/INSTEAD OF clause.
*Action:   Specify either BEFORE, AFTER or INSTEAD OF.

2 identical sets of photos in LR4, one set shows as missing but has all keywords attached; photos not missing are missing keywords

I had to move photos and LR4 catalog from one external storage to another. I now have two identical sets of photos in the catalog but one full set is shown as missing. Easy enough to delete these but they have all my hours and hours of work on keywords attached to them. The other set of photos, the one that actually exists on the drive, has no keywords attached. I gotta have those keywords! Is there a way that won't take the rest of my life to get photos and keywords connected again?

Thanks for helping!
Your suggestion didn't work, but it did get me tinkering around and led me to a solution that's not necessarily quick but definitely easier than re-entering all the keywords.
I was smart enough to not have deleted the photos from the thumb drive they were first saved on, so I plugged it back in. Then I went to the folders list in LR and deleted the existing, missing-keyword photos, folder by folder. Then I just dragged the images from the original drive to the the new one. Well, I'm still doing it to 1500 photos but it's working and it saves me lots of work. So thank you for helping me think of the problem and its solution in a different way. I appreciate your time.

Menu entry under 'Tools' for connecting Bridge with Photoshop gone after deleting preferences

Hi, after I had problems with Photoshop HDR-Pro dialog not coming up, I deleted the preferences of both Brodge and Photoshop. Now HDR-Pro is working again, but just from inside Photoshop, not from Bridge. I don't see the menu entries under Tools to batch pictures in Photoshop. The tick in Bridge -> prefs -> start scripts -> auto collection cs5 is set. Actually I de-selected and selected, deleted prefs 3 times, it's still set now, but the menu doesn't show.
The first time I deleted Bridge's prefs, the Illustrator menu was gone as well. After deleting the prefs again, de-selecting and selecting the Illustrator bits in the start scripts, it's showing again. Only Photoshop is still missing. I read this article
http://forums.adobe.com/message/3941856#3941856
but it didn't help - the start scripts are set correctly in Bridge's preferences, and I've deleted the prefs several times now.
Can anyone help?
The versions:
Bridge 4.1.0.54
Photoshop 12.1 x64
Thanks in advance
Dagmar

The first time I deleted Bridge's prefs, the Illustrator menu was gone as well. After deleting the prefs again, de-selecting and selecting the Illustrator bits in the start scripts, it's showing again. Only Photoshop is still missing. I read this article
Don't know what you mean with deleting prefs, did you use the option key to reset the preferences? or do you mean deleting the Bridge plist file from the user library preference folder.
And in PS the same, did you use the key commands for refreshing preferences?
I understand that you have CS5.5 and it did work before? Also do system maintenance with check and repair disk permissions, (use Apple Disk Utility for this).

SMS Inbox full, even after deleted tons of messages.

It says my SMS inbox is full even after I deleted TONS of conversations. What should I do!? I already did reset all settings.
Help please! =(

for some reason it has to do with the iOS5 update that was released yesterday that I upgraded my 3gs phone on before buying a 4s today. i've been frustrated with it but just figured it out or at least got mine to work.
i had spent a good bit of today deleting messages thinking that would do it. i spoke to AT&T (clueless) where I got my new 4s phone today and did some research here on apple's website and was put on hold by an apple rep for an hour today. from googling i found that your phone supposedly holds 75,000 messages but it must be less than that or have a different way of calculating it than you might think. here's why.
you have more messages than you think. a lot of my conversations went back to 2008. there was one person in particular that i had exchanged a good number of messages with but i wanted to keep those so after deleting messages all day and getting nowhere i decided to figure out how to export SMS messages that i wanted to save. there is an app called SMS Export and that did the trick. I ran it and was suprised to see that after all of my deleting today i still had 61,000 messages. so i exported this one person I had exchanged 20,000 messages with and deleted her messages from my phone leaving me with 41,000. i restarted my phone and when it booted back up the new texts starting flowing through, 17 in all missed today.
back in business!

Slow reboot after deleting bootcamp partition

Hello,
I was just told by a tech store that my bootcamp partition was slowing down my computer incredibly. I no longer need this partition so I went into Disk Utility, clicked the partition, and deleted it. I also had my RAM updated from 4GB to 8GB. I have an Early 2011 Macbook Pro, operating on Yosemite.
The only question I have is, when I rebooted my computer for the first time after deleting the partition, the restarting process took much longer than normal. Without the bootcamp startup, I figured the startup time would be less, when in reality, it was longer. Is there something I missed while deleting my partition, and is there a way to fix this and speed up the reboot time? If not, will this slow reboot be a one time issue?
Any comments would be appreciated!
Thanks,
Rachel

There is a hidden Recovery HD between the OS X and the deleted BC partition, which you can verify using
sudo gpt -vv -r show /dev/disk0
in OSX Terminal.
BCA does a better job by also relocating the Recovery HD appropriately and giving you a contiguous partition.
The only other method is to subsume Recovery HD in OS X partition and then re-install OS X which will rebuild Recovery HD. This does not modify any of you files, but just the OS.
You will also need to clean the Hybrid MBR which is now dangling and inappropriate for your case.

Problem expanding my mac partition after deleting a second partition

I had created a second mac partition to test out OS X Yosemite but after deleting it, my main mac partition is missing about 36 gb of space and when I try to
resize the mac partition to fill up the grey space it won't let me. How can I fix this? Any help is appreciated

Install Mavericks, Lion/Mountain Lion From Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND- R keys until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
I've never done this myself in this way. However, in theory it should work. If it does not, then you must use a Full Internet Recovery process as follows:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

My ipad tells me that my icloud email is already used. That is true. The one whom it is assigned to is me. How can I get it back after deleting it?

My ipad tells me that my icloud email is already used. That is true. The one whom it is assigned to is me. How can I get it back after deleting it?

Deleting an email account for the the mail app will not have any effect on ther AppleId and its use for other services. You need to delete the old ID and set up the new one for other services suxch as FaceTime, App store, etc.
It sounds like you are trying to set up a new ID rather that just adding your old one back in. Or maybe I'm missing something.

Clean up groupwise POA - data still big after delete account

Hi guys,
I migrated antest groupwise sytem from my production.
My POA data is too big (around 80GB) , so i deleted most of mailbox and keep only 10 mailboxes with small size.
but the POA data is still big ( around 80GB ) .
do you know why my POA data is too big after delete? or any step i missed?
or any command to purge my POA?
tks all.

Originally Posted by konecnya
I
It is similar to when you delete a file on the computer, it isn't really
gone at first, just the pointers to it removed.
If you have a good set of routine maintenance running, it will get down
to size before long. Just the default of Emptying the trash being
automatic after 7 days will help. The other part of the puzzle is having
GWChecks on Contents run on a regular basis (weekly) as that will get rid
of the rest of the bits.
For more details on a good set of routine maintenance, see
GroupWise Maintenance
Andy Konecny
Knowledge Partner (voluntary SysOp)
KonecnyConsulting.ca in Toronto
Andy's Profile: View Profile: konecnya - Novell Forums
I ran and got an error "MAINT_IN_PROGRESS (0xC057)" and nothing changed
any more ideas, andy?

Total iPhoto crash after deleting many photos

After deleting many photos--I'm trying to cull the duplicates--and emptying the iPhoto trash, I quit the app and reopened. But it wouldn't reopen except to a BLANK iPhoto page. I could not quit or do anything with the app, so I had to force quit. Did a computer restart, but still nothing, except a split second flash of photos and then absolutely nothing. I paid for this update and have seen no advantages whatsoever from the recent version and now this. Suggestions?!

It's likely that you've damaged the database by trashing too many items at once. Experienced users never delete more than 100 images at a time.
What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Missing keywords after deleting clips?

Similar Messages

Maybe you are looking for