Missing Lensprofiles from SONY and ZEISS in Camera Raw

Hello,
A few months ago I switched from Canon to Sony and Carl Zeiss and ever since I am missing some lens profiles in Camera Raw.
I'm a picture editor and of course miss this opportunity of pre-correcting the lens profiles in the RAW development. I can not create the profiles themselves, like I have already been advised to do by an adobe employee. Now I have been waiting for the latest update and I also changed to PS CC.
Unfortunately, I still miss these camera profiles: SONY SAL-500F40G, SONY SAL-300F28G2, SONY SAL-100M28, 135F18Z Zeiss, Zeiss 85F14Z, 24F20Z Zeiss, Zeiss 1635Z. I hereby would like to respectfully ask for these profiles included in Camera Raw. My entire image processing stands and falls with the RAW development. If I have to make cuts in the beginning, all following workflow suffers.
As a premium provider of image editing software, you should not only follow the mainstream (Canon and Nikon), but also the "niche supplier" (SONY and ZEISS).
I would appreciate any information about that topic very much!

Moving discussion to Camera Raw Forum Discussion

Similar Messages

I have Photoshop Lightroom 5 and have downloaded Camera Raw 8.7.1 &DNG converter successfully. I have a new Sony Alpha 7 11 model ILCE-A7M2 that is supported by LR5. I am still not able to see the RAW pictures. The message says preview unavailable for thi

I have Photoshop Lightroom 5 and have downloaded Camera Raw 8.7.1 &DNG converter successfully. I have a new Sony Alpha 7 11 model ILCE-A7M2 that is supported by LR5. I am still not able to see the RAW pictures. The message says preview unavailable for this file DSC-ARW. Whatelse I should be doing to see my pictures? Can someone help?
Anita

The support for that camera was added in the very latest release of Lightroom, version 5.7.1. Having downloaded Camera Raw 8.7.1 will have no effect on Lightroom because Lightroom doesn't use the Camera Raw plug-in. You need to make sure you have updated Lightroom to the very latest release in order to have support for that camera.

PSE 10 from Apple Store problem with camera raw 6.7 upgrade

PSE 9 was not opening Nikon d4 raw files so I've purchased PSE 10 at the Apple Store and installed on my Mac. PSE 10 is still not opening d4 raw files (camera raw 6.5). I tried to update to 6.7 taken from Adobe but did not succeed to install it. Could you please advice what to do?

Thanks for your help. It works !!!
Bartek A
Wiadomość napisana przez Barbara B. w dniu 17 maj 2012, o godz. 00:34:
Re: PSE 10 from Apple Store problem with camera raw 6.7 upgrade
created by Barbara B. in Photoshop Elements - View the full discussion
You will have to do the update manually for the app store version. Instructions are here:
http://forums.adobe.com/message/4106477
(that's for 6.6 but the steps/file paths are the same for 6.7)
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4414265#4414265
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4414265#4414265. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Why are the jpgs that are generated in my camera better than the ones i create from the nef file in camera raw?

i shoot raw+ jpg in camera, for some reason the jpgs that come from my camera (nikon D300) always seem better than the jpgs i create
from the nef files in camera raw. i am saving at the highest quality. the jpgs from the camera seem to have more detail in highlights
better color more vibrant, sharper. could my camera be doing some enhancements to the jpgs before processing?

I had similar thoughts back when I first started shooting raw. Really, it's just a matter of editing to your personal taste.
Yes, that camera applies lots of presets before creating the jpeg, as Trevor.Dennis mentioned. Also, as he said, you can far surpass native jpegs with raw.
If you need it more vibrant, make it so. If you need to bring down the highlights, do so. Need sharpening? Apply some.
Here is one of my edits that I made a tutorial of: Sunrise Raw File Edit - Adobe Lightroom - Landscape Photography - YouTube. It is one of my less dramatic edits, but still a good one.
I don't want to clutter this thread with links, but if you take a look at my Facebook page, I put a lot of before and afters up in January and February. A Google search for Benjamin Root Photography will bring it up.
I shoot in raw, and highly recommend it.
I'll leave you with a nice NEF RAW file before and after:
BTW, D300 is a nice camera, I've used it...
Benjamin

I want to download and install Adobe Camera Raw 7.1.

I have Photoshop CS5. I want to download and install Adobe Camera Raw 7.1. I get a message saying I need Application Manager. when i down load Application Manager I get a message I need Support Advisor. When I go to Support Advisor I get a message Support Advisor has been Discontinued. All I really want to do is read RAW files from my Oly OMD EM1 with out converting them.
Mac OS 10.7.5

All I really want to do is read RAW files from my Oly OMD EM1 with out converting them.
Not going to happen with CS5.
Camera Raw plug-in | Supported cameras
The E-M1 was first supported in Camera Raw 8.3 which is only supported in CS6 and Cloud versions. Not CS5.
Your options are to upgrade Photoshop or convert to DNG.

Installed the CC updates yesterday. Downloaded pics from my Canon 70D in Camera Raw. Since the updates Bridge no longer recognizes them; advises me to get the latest update, which I have. Both Photoshop CC's recognize the pics, just not Bridge (thanks for

Installed the CC updates yesterday. Downloaded pics from my Canon 70D in Camera Raw. Since the updates Bridge no longer recognizes them; advises me to get the latest update, which I have. Both Photoshop CC's recognize the pics, just not Bridge (thanks for having Photoshop now show thumbnails of CR pics). Any Ideas on how to fix?

Thanks for the link Jeff. Couldn't find any links on the Adobe site.
Even with that link though, I was still left puzzled as it didn't give multiple versions, just a 32 bit and 64 bit version.
I tried the 64 bit and it didn't work, so I assumed that was what had already been installed in the update.
Now installed the 32 bit version, and fingers crossed. At least it starts up now!
Cheers Russell F

The camera raw button in Adobe Bridge has quit working and all my camera raw files are hidden by a c

The Camera Raw button in my Adobe Bridge has quit working and all my raw files are hidden by a cover that says PEF and has a camera raw icon on it. I can open the files in camera raw if I double click on the file but I want to see the files and be able to use the camera raw button. How can I fix it?

This means you have not the correct ACR plug in to support your PEF files or no ACR plug in installed at all.
In photoshop go to the menu Photoshop / About Plug ins / Camera Raw.
Here should be showing the version number of your ACR plug in (only 1 version should show btw)
Then go to this site and check wether your camera is listed and what minimal version you need to open the files:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

Proble with Before and After in camera raw

The problem that I am having is the before and after in Camera Raw. When I press the P key for before and after; CR display the before and after to whole changes that I made and not just to one section. Let say, I am in the Detail section and Just want to see what changes I made in the Detail section only. I used to press the P key, but now I am seeing all the changes that I made to my file. I am using Adobe Photoshop CC and all my software is updated. I appreciatre a fix to this problem with many thanks

Alternatevely you can take advantage of the new function recently introduced in CC. Press "Q" , this will split the monitor in two, (either vertically or horizontally) and each time you go to a new tab and make some change you can go back to previous state by clicking the icon in the bottom right corner (see the picture).
as you can see..you can "toggle between current settings and defaults for the visible panel"

Please help. Performance tips and tricks on Camera RAW 6.6 needed.

Hello I really need your help and I want to thank you in advance for your time!! I need performance tips and tricks for Camera raw 6.6 and Bridge CS5? I have Intel i7 920, with 16GB of RAM which I thought is powerful enough to make developing in Camera RAW smooth as butter but I am not getting that performance. When I slide the settings, it has a delay for the preview and it gets worse if I apply a vignette. I usually open the camera raw file to photoshop and sometimes it does take a considerable amount of time to load. Working on photoshop is great, quick as expected, but Camera RAW makes me cringe.
What tips and tricks would you suggest for performance boost? The best case scenario is to have the preview reflects the changes of the slider without delay. Is this possible?
Thank you very much.

Thank you for your help.
I found an adobe link on how to optimize lightroom and followed some tips there that are applicable to bridge. The notable setting I tweaked was to change my cache directory to my RAID 0 drive, and increased cached size to the maximum setting. The difference is night and day, and I am extremely happy now. The only thing that still bugs me a little is that there is still a slight delay cropping when the vignette is not set to 0 . I can understand that's a little extreme though and I usually add the vignette at the end anyways.
Yammer P:
After making the tweaks, I was able to slide the settings with instant previews even with Noise Reduction (luminance) set to zero.
Robert Shomier:
Thank you for the link, I have seen that before and followed the directions. I upgraded to 16GB of RAM two weeks ago after reading the tips.
Thank you guys again..

Cannot Upgrade Elements 10 Editor (from Mac App Store) to Camera Raw 6.7

Cannot Upgrade Elements 10 Editor (from Mac App Store) to Camera Raw 6.7

You'll have update the camera raw plugin to 6.7 manually as per this thread:
http://forums.adobe.com/message/4106477#4106477
The camera raw 6.7 download:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5382

May i send photo from lightroom v4 to photoshop cs6 and open in camera raw?

Hi
i have lightroom v4 last version 64 and photoshop cs6 64 last updates
i would like to send raw file from lightroom to photoshop without converting in psd or tiff but i would like to send from lightoom to photoshop the raw file
in short open the image in camera raw from lightroom
can i do it?
thanks

Lightroom is Camera Raw. They're exactly the same code, provided versions are in step. Lr 4.4 = ACR 7.4.
"Edit In Photoshop" (Ctrl E) opens the image in Photoshop, just as "Open" does in ACR. And even though you open it from Lightroom, it's actually ACR that silently renders it into Photoshop. Lightroom just passes on its settings.
"Open As Smart Object" embeds the raw file into the PSD, so that you can reopen it in ACR, from Photoshop. Same function as you have in ACR to begin with.
If Lightroom and ACR versions are not in step, things get more complicated and some options are missing.

Import video from sony hdr-sr11 avchd camera into IMAC FCP 6.

About out of options. have tried info from about everywhere. FCPjust doesn't recognize sony hdr-sr-11 camera. Is Apple mad at Sony?

Version 6.0
yes i am using log and transfer
not sure which settings you are referring to
message that appears: "folder" has invalid directory structure. Please choose a folder whose directory structure matches the supported media.

IPad Air won't import video from Sony Cyber-shot W830 camera

We are able to import pictures from a Sony Cyber-shot W830 camera to an iPad Air using the lightning to USB adapter and a powered USB hub. However, if there is video on the camera along with the pictures, or only video on the camera, no option to import to the iPad will show up. I can get video onto the iPad by syncing with iTunes but I'd like to be able to accomplish it using the adapter when we are away from home and without internet access. Any suggestions?

I have got some photos on card, so can't format before importing.
Anyway, after I imported the photos on my old Macbook pro, I format the card in camera, no selection for FAT32, FAT or ... After formatting, I took some new photos for a test. On the new Macbook, the same problem occurred again.

I upgraded my camera and opening a camera raw file no longer works

I went from a Nikon D3000 to a Nikon D5200. I have an old version of Elements (version 8) and I no longer can open a camera raw file. I tried finding an answer in the support area but am not sure I found what I needed to know. Since my camera is new and didn't exist at the time I purchased Elements does that mean that my old version doesn't support my camera?

You need to buy PSE12 or Lightroom 5.
Alternatively, download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
Windows download (.exe file) click here DNG Converter 8.2
Mac download (.dmg file) click here DNG Converter 8.2
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

Adding Sony plugin to Adobe Camera Raw (6.7)

Can't figure out how to add Sony's ARW2 raw format to Adobe Camera Raw for Photoshop CS5. Am I forced to go to PS6 and all that Cloud stuff?

If you install the Sony plug-in, or any other Sony software, in Photoshop, it will create massive conflicts.
You can't add anything to any version Adobe Camera Raw for Photoshop. ACR itsel if is nothing but a Photoshop plug-in. You can only install plug-ins in Photoshop proper, the same way ACR itself is installed. But, as per the previous paragraph, that is a monumentally bad idea.
To convert your Sony raw files, you use EITHER ACR in Photoshop, or skip Adobe Camera Raw and Photoshop and use the Sony software for the conversion.

Missing Lensprofiles from SONY and ZEISS in Camera Raw

Similar Messages

Maybe you are looking for