Missing Library (HINT.PLL) in DEV6

I am using DEV6,it seems that the ibaray
HINT.PLL is missing. From were I can copy it!
I am using it to display the hint property when mouse navigate to a button item.
Thanks

Hi Hazeem,
The Hint.pll was given as a Workaround in forms 4.5 which did not have a tolltip property.
Since u have the tolltip property u can use that instead of the Hint.pll.
I u are porting from forms4.5 to forms 6.0
then u can copy the hint.pll and attach the same in your forms. The Pll is available under orawin95\forms45\plssqllib\hint.pll.
Best of Luck.
Regards,
Ganesh R

Similar Messages

What replaces hint.pll in Forms 6i?

I just upgraded from Forms 4.5 to Forms 6i. The Developer/2000 tool did most of the work, but several of my forms use hint.pll to perform mouse detection/functionality. This is not working in 6i, and I noticed that the demos for 6i don't include this pl/sql library any more. What replaces it in 6i?

Hi,
Actually there is a property by name ToolTip.
Give the hint u want to display for that paritcular item.
U need not use hint.pll.
Regards
Magesh

The missing library problem.

I understand that there's already a lot of threads about the sudden disappearance of iTunes libraries, however I'm typing this up because I'd like to point out in a bit more detail what I'm seeing happening to my computer, and maybe have a collective of what's going on. This issue has happened to me five times in the last two months since I've updated to iTunes 11. After searching on google I know the missing library problem has existed since the early 2000s; why this glitch has yet to be fixed 13 years later is beyond me. I have personally never had this problem until updating to 11, and seeing the many other threads on here this appears to me to be an issue with this version of the software more than it has been in previous versions.
Before I continue, I have tried the following to fix it:
Simply readded my whole library. It was only wiped again a few weeks later.
Completely uninstalled and reinstalled iTunes. That didn't work either, so it's not just an updating problem.
What I haven't tried
Changing where on my computer iTunes is installed. I have no idea where on the computer might be better or if it will change anything. I have iTunes installed on its default location on my local C: disk.
Importing the music directly from my iPod into iTunes. Can this be done? If so, how? Not everything on my iTunes is a store purchase, most of it is imported CDs and also amazon purchases too. So I don't know if the transfer purchases option works. While this wouldn't fix this current issue, I would like to know how to do this if possible since it would just be a quick fix whenever this happens.
What is happening:
So each time this has happened, what occurs is that like many other people, one day I open my iTunes and everything is in order. Then the next, for no reason, all of my libraries are gone but the music is still on my computer, organized in their files the way iTunes had them done so upon importing. I can't use the .itl files in the "previous libraries" folder because they have also been re-written. Upon opening them, even if their last save was on a day I know everything was in working order, opening them does nothing but give me the same blank default page.
What isn't mentioned in a lot of the posts regarding this issue, is the sudden crop of temporary files in the iTunes folder.
The ones that have cropped up for me personally are the following:
iT 1.tmp
iT 2.tmp
iT 3.tmp
iT 4.tmp
Temp file 1.tmp
Temp file 2. tmp
Those were not there the last time I used iTunes, and they're never there on the days I've used it before and it has worked correctly. However every time my library is wiped, these files suddenly appear without fail, every time. I can't open them, I can't do anything with them except delete them. I believe I remember reading somewhere that this might be an issue regarding with how the program is saving the progress of your library changing, and that the temp files are there until it can "officially" save what has happened to your library. While I didn't change anything in my library in the last couple of weeks, I'm assuming this also counts things like play count.
My own personal opinion
Seeing just how many threads with this issue are popping up, this leads me to believe that this isn't just a problem with my personal computer or my personal install of iTunes 11. These temp files also lead me to believe that as well. In other words, whatever glitch has existed with iTunes since the early 2000s is for some reason running rampant in version 11.
TL;DR:
Please developers, actually look at this library glitch within the program itself. It can't just be an individual user's problem because way too many people are experiencing it.

No worries. You've probably run into one the other threads I've posted to but I'll add my thoughts here anyway...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be copied and renamed as iTunes Library.itl to restore the library to an earlier state. Look for a recent .tmp file that is similar in size to the .itl files in the Previous iTunes Libraries folder. If it has happened repeatedly you may want the earliest such file generated since the last iTunes upgrade.
If applicable, see iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2

Missing library imath/engines/lvmath

Hi all, so i am trying to run an older .vi (several of them actually) not sure which version they were created in. My guess would be 8.2 or 8.5. I am using 2010 and there seems to be a missing library imath/engines/lvmath
included in this is a bunch of MC_(somthing) type vi's
also having the same problem with some excel vi's
thoughts?
Thanks
Solved!
Go to Solution.

That looks like the code was using MathScript. In current versions of LabVIEW MathScript is an add-on. That you have to buy. So, you can:
Rewrite the code to not use MathScript
Buy MathScript
Use an alternative. Scilab might work for you.
P.S. When you try to close the VI LabVIEW will ask you if you want to save the file. If you click on the link that says "Describe changes" (or something like that), it will tell you the version of LabVIEW used to write the VI originally.

Library EXCEL.PLL

dear all,
I need a library excel.pll to enable me import data from excel to oracle form.
Anyone to assist me plse...
thanks in advance

we have tons of posts in this forum with excel to form and form to excel answers and question. Use the search button and research a little bit

Script to find missing library references

When readline5 came out I decided to write a quick shell script to find any binary that references readline4. Then I generalized it:
#!/bin/bash
# 2004/08/22 K. Piche Find missing library references.
ifs=$IFS
IFS=':'
libdirs="/lib:/usr/lib:/usr/X11R6/lib:/opt/gnome/lib:/opt/qt/lib:/opt/mozilla/lib/mozilla-1.7:/opt/kde/lib"
extras=
# Check ELF binaries in the PATH and specified dir trees.
for tree in $PATH $libdirs $extras
do
echo DIR $tree
# Get list of files in tree.
files=$(find $tree -type f)
IFS=$ifs
for i in $files
do
if [ `file $i | grep -c 'ELF'` -ne 0 ]; then
# Is an ELF binary.
if [ `ldd $i 2>/dev/null | grep -c 'not found'` -ne 0 ]; then
# Missing lib.
echo "$i:"
ldd $i 2>/dev/null | grep 'not found'
fi
fi
done
done
exit
I successfully used it to find readline4 usage by guile and jack, and other older library references in other packages. Hope the devs or somebody finds it useful. And yeah it could pull the lib dirs from ld.so.conf or search the whole system but it is quick and dirty...
PS. Without the /dev/null redirects ldd reports tons of libraries without the exec bit set. Take it out if you want to see that stuff.

so simple and SOOO USEFULL!!!!!!!
thanx a lot, for this script :-)
i detected also some more trouble:
e.g.:
/usr/bin/xml2ps:
libgtkmm-2.0.so.1 => not found
libgdkmm-2.0.so.1 => not found
libatkmm-1.0.so.1 => not found
libpangomm-1.0.so.1 => not found
libglibmm-2.0.so.1 => not found
/usr/bin/passepartout:
libgtkmm-2.0.so.1 => not found
libgdkmm-2.0.so.1 => not found
libatkmm-1.0.so.1 => not found
libpangomm-1.0.so.1 => not found
libglibmm-2.0.so.1 => not found
/opt/kde/bin/khangman:
libknewstuff.so.1 => not found
/opt/kde/bin/kpalmdoc:
libreadline.so.4 => not found
/opt/kde/bin/kpilot:
libreadline.so.4 => not found
/opt/kde/bin/kstars:
libknewstuff.so.1 => not found
/opt/kde/bin/klettres:
libknewstuff.so.1 => not found
/opt/kde/bin/kpilotDaemon:
libreadline.so.4 => not found
/opt/kde/bin/korganizer:
libknewstuff.so.1 => not found
libknewstuff.so.1 => not found
/opt/gnome/bin/gnome-pilot-make-password:
libreadline.so.4 => not found
libreadline.so.4 => not found
libreadline.so.4 => not found
/opt/gnome/bin/gpilot-install-file:
libreadline.so.4 => not found
libreadline.so.4 => not found
libreadline.so.4 => not found
/opt/gnome/bin/gpilotd-session-wrapper:
libreadline.so.4 => not found
libreadline.so.4 => not found
libreadline.so.4 => not found
/opt/gnome/bin/ssconvert:
libssl.so.0.9.6 => not found
libcrypto.so.0.9.6 => not found
/opt/gnome/bin/gnumeric:
libssl.so.0.9.6 => not found
libcrypto.so.0.9.6 => not found
/opt/gnome/bin/gpilotd-control-applet:
libreadline.so.4 => not found
libreadline.so.4 => not found
libreadline.so.4 => not found
/usr/lib/xine/plugins/xineplug_inp_dvdnav.so:
libdvdnav.so.1 => not found
libdvdread.so.2 => not found
libxineutils.so.0 => not found
libxine.so.0 => not found
/usr/lib/ruby/1.8/i686-linux/readline.so:
libreadline.so.4 => not found
/usr/lib/newpg/gpg-protect-tool:
libgcrypt.so.1 => not found
/usr/lib/avifile-0.7/xvid.so:
libxvidcore.so.2 => not found
/usr/lib/libpisock.so.8.0.5:
libreadline.so.4 => not found
-> for sure broken:
jack, pilot-link, gnumeric, ruby, passepartout, xine-dvdnav, kde (games, edu, pim, maybe lib and others)
the script is still running - takes long to check 5GB of bins :-)
EDIT: finished - list updated - going to post bugs

RE: Missing Library Items CS6

Hello Everyone.
I am Downloading the Missing Library from this Link, Is this the correct Link ?
http://helpx.adobe.com/encore/using/download-library-content.html
After I Downloaded the Zip Folder, Where Do I need to copy paste the Items ?
I looked under Adobe/ Adobe Encore CS6, but I Dont see any folder called Library.
Please let me know where I have to copy paste the files
Thanks.

>Where Do I need to copy paste the Items ?
It tells you at that link
Depending upon your operating system, copy the Library, main, Styles, and Template folders from the folder containing the extracted library content to the appropriate location:
Windows: C:\Program Files\Adobe\Adobe Encore CS6\
You will then have
C:\Program Files\Adobe\Adobe Encore CS6\\Library
C:\Program Files\Adobe\Adobe Encore CS6\\Library\Corporate
C:\Program Files\Adobe\Adobe Encore CS6\\Library\Education
...and so on for all of the folders

"MISSING LIBRARY' that what itunes keep on saying

From a while i installed itunes on my my sisters pc that runs windows and it was working normally but yesterday she was putting some songs on her ipod nano and she had a problem, so what i did is that i reinstalled itunes and it gives me that it finished installing but when i open itunes it says "missing library" and i cant do anything so what is the solution for this problem?

I have the same problem too. It is frustrating since I have the account for more than 3 years and now I try to purchase an app for my kid and I can't do it. I use Paypal, I change to my credit card and still have the same problem. I choose my country by pulldown and still having the same "invalid address" message.
I'm a regular buyer and now I can not do that.

10g Forms - 11g Forms with Object Library and PLLs

Hey All,
Our organization is working towards converting our existing Forms 10g architecture to 11g / Weblogic. I'm currently attempting to get the 11g Developers suite working locally, and hit a bit of a snag.
I'm using Windows XP Prof SP3.
Here is what I have working:
* I got the correct version of WLS installed
* I got the Dev suite itself installed
* I can start and run WLS
* I can open form builder, create a simple form, run it, it works.
Here is where I am stuck:
I am trying to get our existing 10g forms to compile and run under the 11g architecture. These forms were all developed using smart classes in an object library and all call various PLSQL procedures in a PLL file.
I've done the following:
* Recompiled all PLLs and menu modules using 11g compiler binaries
* Made sure the FORMS_PATH registry key included where my PLX, OLB and FMX files are (under the correct, HOME key, I hope).
* changed default.env file so FORMS_PATH points to where my PLX , OLB and FMX files are
However, when I try to run any of the forms, I get the following error immediately :
"FRM-93652: The runtime process has terminated abnormally.
Contact your administrator.
Details....
Forms Session ID is formsapp.1"
And in the trace file, there isn't much helpful information:
Last Trigger FORM/BLOCK/FIELD: AIS_WELCOME.<NULL>.<NULL>
Last Trigger: PRE-FORM - (In Progress)
--- Call Stack Trace ---
EnumerateLoadedModules64 failed with error -1073741819
calling call entry argument values in hex
location type point (? means dubious value)
EnumerateLoadedModules64 failed with error -1073741819
01571C5E 00000000
015714A4 CALLrel 01571870 314E9E8 314ADA4
0157151D CALLrel 015713BC 314E9E8 314EA28 3 12BB4C
12BB48
014B131F CALLrel 015714FC 314E9E8 314EA28 3 314EA94
12BD28
014A20F5 CALLrel 014B112C 314E9E8
014797FE CALLrel 014A1E1C 314E9E8 1 0
665F1DEE CALLrel 66614E06 2E4C6F4 314E9E8 0 80000400
80000040 100000
6611B066 CALLrel 6619E0FC 24E3CF0 32105D8 2E44D10
2E13B64 0 6611A492
00000001 CALL??? 00000000
--- End of Call Stack Trace ---
Since I can create forms from scratch, it has SOMETHING to do with the subclassing / Object Library or the PLL/PLX. Can anyone give me any clues or hints? Is there any more tracing or logging I can turn on to get a better clue of the problem?
Thanks!

* ***NEVERMIND*** *
I figured it out. I missed one of the the PLX files, and it was not recompiled under 11g. It is working now! Sorry to gum up the forum!

Solaris 10 x86 - libld.so missing any hints how to get it back?

Howdy. I've installed Solaris 10 on x86 64 bit dual core opteron machine.
I've also installed full Solaris companion DVD with the gcc compilers.
I also got all the patches installed.
OK, I'v downloaded Perl 5.8.8 and attempted to compile, here's a thing. The compiler could not compile since libld.so was missing.
ld: fatal: library -lld: not found
ld: fatal: File processing errors. No output written to try
collect2: ld returned 1 exit status
I can't compile the test program.Though perl configuration told it found shared ld lib.
No -ldld.
Found -lld (shared).
No -lsun.I've lurked around and found libld.so.2 and libld.so.3 located at /lib
However, I did not find libld.so anywhere. I tried creating symbolic link to one of these files found, and then compiling - compilation failed due to linking errors.
It seems there must be a missing libld.so (I think).
So, the question is, where could I get this library from? Does it come with the gcc compiler? (I could run the compiler install again) or does it come separately with the Solaris install CD/DVD ? What's the package name?
Any hints greatly appreciated ;-)
Yaerek

I found that there was a library name /lib/ld.so.1 It appears as though this is missnamed. I created a link
ln -s /lib/ld.so.1 /lib/libld.so.1
Then I created a second link:
ln -s /lib/libld.so.1 /lib/libld.so
Everything now compiles without issue.

Missing library error while deploying the ADFBC application

Hi,
I have small application developped using ADFBC. The application is working perfectly fine when I run the app using JDev.
When I try to deploy the app to the standalone oc4j, I am getting following error...
Binding SRDemoApp web-module for application SRDemoApp to site default-web-site under context root SRDemoApp
Exception: NoClassDefFoundError:
     Missing class: oracle.jbo.ApplicationModule
     Dependent class: oracle.srdemo.model.common.SRService
     Loader: SRDemoApp.web.SRDemoApp:0.0.0
     Code-Source: /home/oracle/jdev/JDev4745/j2ee/home/applications/SRDemoApp/SRDemoApp/WEB-INF/classes/
     Configuration: WEB-INF/classes/ in /home/oracle/jdev/JDev4745/j2ee/home/applications/SRDemoApp/SRDemoApp/WEB-INF/classes
The missing class is available from the following locations:
     1. Code-Source: /home/oracle/jdev/JDev4745/BC4J/lib/adfm.jar (from <code-source> (ignore manifest Class-Path) in /home/oracle/jdev/JDev4745/j2ee/home/config/server.xml)
     This code-source is available in loader adf.oracle.domain:11.1.1. This shared-library can be imported by the "SRDemoApp" application.
     This code-source is available in loader adf.generic.domain:11.1.1.
I have adfm.jar in the BC4J/lib also.
Some body please help me out

Finaly we solved this...
Actualy we need to add the below tag in applications.xml
<imported-shared-libraries>
<import-shared-library name="adf.generic.domain" />
</imported-shared-libraries>

Missing Library presets in Encore CS5.1. Is there a download for this?

I have Adobe Encore CS5.1 running on my Mac, however the preset library is empty. The only link I could find to download them was this: http://helpx.adobe.com/x-productkb/multi/library-functional-content-missing.html#Download the extra library content but this only seems to cater for CS6 and upwards. Is there somewhere I can retrieve the library folder?

No I downloaded the CS5.5 creative suite a few years ago. Although all the products are CS5.5, for some reason Encore is CS5.1. I'm sure why that is, but the library is completely empty.
Encore was not a "full" upgrade, so it got a minor version increase. But the bottom line is that the version of Encore in CS 5.5 is Encore CS5.1.
An oddity of the Encore CS6 library install is that it REMOVED the library for CS5.1. Never did figure out what the logic was or whether it was a bug. A real mess.
But the bottom line for you is to use the CS6 library but install it using the following method rather than the dmg installer.
Encore Help | Download full library content/functional content
This method just involves extracting it and putting the folders in the right places. In addition to the library folder, you can also put the styles (fonts etc) and templates (flash export) in.
Edit: if it wasn't clear, you are going to put the library etc into your Encore 5.1 install directory.

Cannot open library files(.pll) in 10G

Hi,
When I try to open or create a library file in 10g I get PDE-PLI018 Could not find library error. I can open or create fmb file though.
I could not create or open in Forms 10 g. 9.04 and again in Forms 10g 10.1.2 version. Operating System XP.
Edited FORMS_PATH by adding the location of .pll files.
Edited default.env varible adding the location of .pll files.
Modified environment variable to C:\Temp for Temp and Tmp both.
Modified Report_tmp in the registry to c:\temp
Modified Forms_Path in the registry added the location of the plls and fmbs.
Also get the following error when I try to save the forcefully created .pll file twice
Rebooted the pc.
Oracle Forms Designer has encountered a problem and needs to close. We are sorry for the inconvenience......
Can anybody help??

You said that the error was:
"Oracle Forms Designer has encountered a problem..."
Are you in the Oracle Forms Builder or Oracle Designer when this error occurs?
There are several possibilities. Here are a few:
1. You are trying to read/write the pll to a network share. Ensure that you the files are stored locally.
2. For the Builder (design time), the FORMS_PATH must be set in the Registry or in a batch file if you use one to start the Builder. The total length of all entries in FORMS_PATH should not exceed 1024 (recommended, however that it remains under 512)
For runtime (in a browser), the same setting and rules apply expect the entry is made in default.env
3. If you have more than one version of the Builder installed on the machine, ensure that the system PATH reflects the version you are using as first in the list.
4. The installation may have been corrupted.
5. Be aware that the correct environment variable for 9.0.4 is FORMS90_PATH and the correct variable for 10.1.2. is FORMS_PATH
6. Once opened and re-saved in 10.1.2, you will not be able to open in an older version.

Missing Library Albums and Built in Smart Albums

Hi,
In AP3 I am missing the built in "Library Albums" with the associated smart albums (★★★★★,Rejected etc). I did a search and someone solved the problem by deleting the BuiltinSmartAlbums.plist located at user/library/application support/aperture and then restarting Aperture.
My problem is I cannot locate the plist file. It's confusing, as I can create a new library and the Built in library and associated smart albums are available. However, I would like the option in my existing library.
Does anyone have an idea how I can recover the built in Album/smart albums?
Thanks

Well, they aren't in the libraries that are "split" from another, so I guess that is how you wound up in this situation.
You can simply remake them, takes only a few minutes and put them in your own folder (but then you might have problems with sorting).
How about just importing your entire current lib into a clean new lib that has the albums?

Exporting to Flash, missing library item?

I am using Flash 8 (also tried CS3, but flash 8 seems to
import Captivate much better) and Captivate 3.
I want to create a project following the steps outlined in
this adobe article.
http://www.adobe.com/devnet/captivate/articles/cpvideo_03.html
(this is the link to page 3 where the steps to exporting to flash
are outlined)
I am unable to because an item the author says should be in
the Flash library is missing. From the article:
quote:
1. Import the Macromedia Captivate project file using the
Import to Library option. Be sure to deselect the audio import
option (remember, the audio portion is in the FLV file) and any
other Macromedia Captivate feature that you did not use in your
demo.
2. Upon import, open up the Library panel and locate the
Macromedia Captivate content. It will have the same name as the
original Macromedia Captivate project file but with a CPT
extension.
3. Drag it to the Stage and name the instance captivate_mc.
If you omit this step, the resync code will not work.
But I am not seeing any "captivate content file".
Anyone have any thought/suggestions?

Well I guess captivate 3 must export slightly different than
Captivate 2. I had to basically manually create the movie clip the
article talks about. When you export from cap3 to flash it puts
everything on the scene 1 timeline. So I copied ALL the frames
& layers, created a new movie clip and put it all into that new
movie clip symbol. Just kind of a pain to have to do it manually,
but not a big deal.

Missing Library (HINT.PLL) in DEV6

Similar Messages

Maybe you are looking for