MISSING LIBRARY / INSPECTOR / FILE BROWSER

Folks,
I have now had this happen on 2 machines. When working with complex projects, Motion would crash - and then upon relaunch it would be missing the library, inspector and file browser windows. No, they are not located outside the desktop area. No, they do not respond to key commands - nor do they show up when you go under the WINDOW menu options and choose from there. Now....they DO SHOW UP after I uninstall/reinstall the entire FCS1 package. But the time involved is debilitating. Now here's the caveat about uninstall/reinstall. The windows show back up in the FCS1 install - when I do the software upgrade from the MAC/APPLE website - a once normally working MOTION no has missing windows just like before.
Is this an OS thing? I have LEOPARD.... but I'm scared! Ha! can anyone give me solutions for motion or peace to upgrade?
Cheers,
Jason

welcome to the posts jason.
At the danger of sounding like a stuck record, have you tried throwing the Motion preferences away. Make sure motion is off, go to your Home Folder / Library / preferences / com.apple.motion.plist and throw it away. then re-boot motion, are they back?
hth
adam

Similar Messages

  • Cannot get File Browser, Inspector or Library to show up in Motion 3

    Hi I open motion and can see the main window but when I try to access my File Browser, Library or Inspector it will not show up or do anything If I click on the Project or Timing Icons that works but nothing else?? Add Behavior, Add Filter, Make Particles and Replicate is all greyed out too!
    Where do I find the preference file to trash it??
    Thanks!
    Message was edited by: Tony Saiki1
    Message was edited by: Tony Saiki1

    Thanks to you Patrick, it works for me now. What i did i went to my start up drive (Macintosh HD)>Users>Users name>Library>Preferences>com.apple.motion.plist then trash the file. I hope this helps to other users...
    Message was edited by: DJRhey

  • File Browser/Inspector is stuck

    After having Motion up on my computer for only a short time I 'lost' the File Browser, Inspector and Library and I can't get it back. actually at the begin i couldn't use the Motion3, then the techion suggect me open a new account. after that i can use the motion3 but only 2~3 weeks the File Browser, Inspector and Library are miss. Do I need to reinstall? Or open a new account AGAIN?

    Yes, so deleting the preferences file solves the problem...for a time. But once I close Motion and re-open, the same problem occurs. So I have to delete this preferences file in order to use the File Browser every time I close Motion. How do we communicate with the programmers to get this bug patched?

  • File Open Issues - document library pdf file to open in new browser window

    Hi
    I have a requirement to open the document library containing pdf file to open in new browser window. So far I have tried following steps but could not get it to work.
    1. Changing Document library advance setting to open the document in browser (have tried others as well).
    2. SharePoint web application setting changed as Permissive instead of Strict. Here the pdf file opens in browser but redirect from document library instead of new window(Also tried adding Target=”_blank” and no change).
    3. Executed the powershell script to adding MIME type to see if it works but no change.
    $webApp = Get-SPWebApplication http://SharePointSite
    If ($webApp.AllowedInlineDownloadedMimeTypes -notcontains "application/pdf")
    Write-Host -ForegroundColor White "Adding PDF MIME Type..."
    $webApp.AllowedInlineDownloadedMimeTypes.Add("application/pdf")
    $webApp.Update()
    Write-Host -ForegroundColor White "Added and saved."
    Else
    Write-Host -ForegroundColor White "PDF MIME type is already added."
    4. Open the Doc library and modified ALLItems.aspx to add Target= “_blank”
    5. I have already tried solutions suggested in the link:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9db08c4a-b53c-419a-84f8-001c194d1311/how-to-open-sharepoint-document-library-pdf-file-in-new-window?forum=sharepointadminlegacy
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/530e2ea1-d77d-491c-935f-04f536e439a5/open-a-pdf-document-to-a-new-browser-in-the-document-library-web-part?forum=sharepointadminlegacy
    http://mindsharpblogs.com/todd/archive/2005/08/16/654.html
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/7b6091df-4657-4799-ba02-259ebd7e4b7c/pdf-doesnt-open-in-document-library?forum=sharepointadminlegacy
    Appreciate if there are any working solution from any of you. Many Thanks

    I found a solution which works only in the development. No idea when I compared, Browser MIME type is enabled, STRICT browser type is configured for web application. on the document library advance setting, default to open in new browser. Both configurations
    are identical but I am able to open pdf file in new window in my developing using jquery script
    http://blog.ithinksharepoint.com/2011/02/21/open-pdf-files-from-a-document-library-in-a-new-window/ but the same does not work on production server :(
    Any help experts?
    Thanks

  • File Browser, properties, library window will not show up

    I'm using an old version of Motion 3 and my File Browser, properties, library window will not show up even when I click on the icons and/or press command+2,3, or 4 . Seems to be some kind of settings glitch as Motion works fine when logged in under another user. Any thoughts.

    schlickler,
    Welcome to Apple Discussions.
    but now I have the preferences folder on my desktop--does that have to stay there?
    No, it can be trashed.
    Plist files contain instructions for recording and executing tasks associated with the the application or function that owns them. They can and do become corrupted. If you look in the username/Library/Preferences Folder you can usually guess what application or function the .plist serves by analyzing the file name. In this case it was the com.apple.iCal.plist file.
    Proper identification of the appropriate .plist file is not always so obvious. When an application malfunctions, removing the associated .plist file from the preferences folder to the Desktop is often the easiest first troubleshooting step. Then log out/in or restart and re-evaluate the performance of the application.
    A new default .plist file is automatically created in your Preferences Folder after you remove the recalcitrant .plist and initiate the log out/in restart sequence. You can expect default application behavior and you will have to reset some preferences. If the application or function returns to normal after removing the .plist file, it will prove that the original file was corrupt, and you can now safely trash the .plist file which you placed on the Desktop.
    If the application or function is unsatisfactory with the new plist file, the original plist file which was placed on the Desktop can be safely returned to the preferences folder. Just allow the system to replace the newer plist.
    If you are having problems with any aspect of OS X, experiment with deleting the appropriate .plist file. Plist corruption is not uncommon and .plist file deletion often cures many problems. Too many users try intricate solutions first and end up complicating their minor problem.
    ;~)

  • File Browser/Library window wont appear

    My file browser/ library window won't appear, it's gone? I tried checking and unchecking them under the window pull down menu.No Luck. I have all the latest updates
    Anyone have any ideas?
    THX

    OH GOOD LORD, MAN...
    Search is your friend:
    http://discussions.apple.com/thread.jspa?threadID=1958978&tstart=0
    you just had to slide your eyes down the page only slightly...
    Next time try the search, it's delicious!
    http://discussions.apple.com/search.jspa?q=libraryfilewindow&objID=f656&dateRange=all
    Patrick

  • HP preloaded software error 1311 for Adobe XI application library or file for Help missing

    Operating system HP2011s/x, Pavilion P7-1026b, PC Desk/ Windows 7 w/64 bits w/PC bundle.  Preloaded Adobe XI software from HP not working properly the pop-up errors are as follows:
    (1) Error 1311  (2) verify operation failure (3) a required application library or file for Help is missing. Please, need help in correcting.  Thanks.

    Please download and install the free Abode Reader XI from Adode's website by clicking on this "Adobe Reader XI (11.0.03) Download" link. This will provide you with a slightly newer version than what was previously install on your computer.
    Additionally, it is in your best interest to create your personal set of HP Recovery Discs before a major disaster occurs with your computer. Please see "Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 7)" for instructions on create either Recovery Discs or USB Recovery media, if given the option.
    Please send KUDOS
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • I cannot install iTunes 10.5. Get error message: C:\Program Files\Common Files\Apple\Apple Application support\webkit.resources\inspector\images\timeline Pill Orange.png"  I seem to be missing the "image file."  How to fix.

    Teh problem seems to be tht I am missing the "images" file.  Installs to that point and stops.

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Image Button file browser icon missing

    Hi there, I've been using C5 this week for the 1st time and have been working through a project. All has gone ok to date, a few niggles along the way but I've run into a huge bug this morning which is wrecking my plan to finish the project.
    I'm adding an image button to a slide and have found to my frustration that the file browser in Properties has vanished, pushed out past the properties block, which of course cannot be resized to the right (thanks Adobe, nice UI design there). This means I can't choose any image for my button apart from those already loaded in the preview which is utterly useless. I've attached a screenshot to show what it looks like.
    As you can see the Image Button drop down has gone very wide and pushed the folder browser icon out of sight. Simply maddening!
    I had been using image buttons all week with out any issues. Yesterday an update appeared (5.0.1.624) for C5 so I applied it. Then this issue started. I have since uninstalled C5 and reinstalled without applying the update and its still doing it. What I didn't do was reboot after the uninstall, maybe I should have done...
    Anybody else come across this? if it is a bug its a crippling one!!!!

    Hi Niall-Mac and KiHwa -
    This is indeed a CP bug!!! We found this some months ago - it turns out that if you name your button images with a very long file name (35-40 characters plus), it slowly starts pushing the "browse" folder icon further and further to the right of the panel. Add a few more buttons with longer file names to the gallery and eventually it disappears altogether, like you both have encountered (see image).
    Workaround 1 (best practice IMO until CP dev team fixes this):
    We started creating buttons in a separate CP file, creatively named "projectName_buttons" - this way any time we need a button we go to this file and copy/paste it into our project and we never have to mess with the button gallery in our working (source) file. If the "browse" icon disappears again in our buttons file, we simply copy all our buttons from our "project_buttons" file into a new blank project and save over the old (broken) one.
    Workaround 2 (not so user-friendly):
    1. Stretch your timeline panel as wide as it can go on your monitor (I use two 21" monitors to develop so I can make my timeline rather long)
    2. Undock the properties panel so that it is a floating window
    3. Drag the properties panel by the topmost dark gray bar just above the "Properties" tab and place it just below the timeline until it snaps into place - now don't let go of it just yet, drag it up a tiny bit further - as you do this a blue bar will appear signifying that it will dock to that position (underneath the timeline) - when you dock it to the timeline it will stretch to the same length as the timeline and voila, you can now see the "browse" icon - however, who wants a properties panel that takes up your whole monitor!!!! I certainly don't.....
    On a side note, it is very disheartening that once buttons are in the button gallery you have NO CONTROL over them - if they need to be edited you are forced to rename them so you can import a fresh button. This method unnecessarily creates TWO copies of a button in your gallery - the more edits you make to a button the more copies of that button you get in your gallery....some control over the button gallery would be nice.
    Hope this helps.
    Cheers,
    pixelatedView99

  • Encore CS3 missing Library Files

    I have installed Encore CS3 and also purchased the Adobe Master CS3 DVD 30 day try out. On three different PCs. Running Windows Pro, tried different user types, MSconfig to turn off program when installing, you name it.... When I run Encore and look for any Library file nothing is there.. just a General Tab and no files. I called Adobe after 45 minutes, 5 different contact people I was told to do a reinstall (duh!).. I did that same problem.
    Can anyone tell me how to get Encore CS3 to install the Library content files or where to locate these to install.
    Thanks
    DP

    Neither does the full version. I purchased the full version this week and NO LIBRARIES
    I upgraded (at least I thought I was upgrading) Premiere and Encore this week. I am close to asking for a refund since I have had nothing but issues with both.
    My problem right now is the libraries for Encore CS3. You know the templates for menus and buttons etc. Some people call that content but the useless people in India call the manuals content so I am trying to be clearer.
    I bought the downloaded version so please do not tell me they are on disk #3. I download 5 files and installed them. Some of them I re-downloaded and I installed twice. They are.
    - ADBEPPROCS3_ALP.exe (Premiere Pro CS3)
    - ADBEAENCC3_ALP.exe (Encore CS3)
    - PPROCS3_Cont_ALP.EXE (Premiere Pro Content/manuals)
    - AENCCS3_Cont_ALP.exe (Content/manual installer for Encore CS3 manual)
    - AENCCS3_Cont_ALP.7z (3 gig file of foreign language manuals)
    I am running on an HP M8040N with Vista Ultimate (32) I of course search the Adobe site and Google and I have seen other people with the same problem. After spending 1 hour with "Tech Support" in India I was told I needed to call Adobe Tech Support Monday thru...you get the idea.
    WHAT AM I LOOKING FOR...the pre made Templates, Menus, Buttons, etc. that came with the disk version of Encore.
    Can anyone help or am I effed for the week-end and most likely beyond?

  • Some Aperture photos and projects missing from iLife Media Browser

    Good evening - having a little bit of trouble getting Aperture to work smoothly with my iLife media browser (i.e., inserting photos into Mail, Pages, Keynote, etc).
    I currently have 5699 photos and 131 projects in Aperture. But the iLife Media Browser only shows me 5131 photos and 130 projects; when clicking on individual projects in the browser, anywhere from 3 to 70 photos per project are missing. Tried repairing permissions, repairing the database, and rebuilding the database - this improved the issue, but didn't completely resolve it as 5679 photos now show in the Media Browser, and 20 remain missing. Also tried deleting, and generating previews for all my photos in the library. No change.
    My library is mostly referenced, with a few photos managed.
    Obviously in the grand scheme of things 20 photos missing in the Media Browser not that big a deal. But wanting to get to the root cause though because without solving this issue, I'm concerned about a larger underlying problem that may only get worse as my library grows.
    Has anyone had, or resolved a problem similar to this? And can anyone offer any additional suggestions? Are there any specific files that feed the iLife Media Browser that I can delete and rebuild that may solve this issue?
    thanks,
    Mark

    I think I've ironed this out. Several intertwined issues. I took a moment to type out my notes; hopefully it helps you guys solve this quickly if you get a call from someone else on this down the line.
    [1] original problem of several hundred items missing in Media Browser: probably an issue of previews not being built. Mostly fixed when I regenerated previews for my library, but repairing permissions and repairing the database may have helped too.
    [2] Residual problem of 20 items still missing (5698 items displayed in Aperture when selecting Inspector > Library > Photos; 5677 items displayed in Mail Photo Browser). My issue wasn't as much with 20 missing items in a browser as it was with trying to understand the root cause and whether I had an underlying Aperture, Aperture Library, or OS problem that would bite me later. Turns out several things were causing this problem:
    [2a] In Aperture, when you select Inspector > Library > Photos , all your content is displayed: photos, videos, and any audio clips you may have imported (e.g., a recorded audio clip on your camera narrating shoot, location, client, exposure value etc). So even though you've selected "Photos", your "xxx items displayed" count on the bottom of the screen reflects all your imported content. This is not the case in the Media Browser - of which there are two variants in Mac OS:
    [2a.1] Mail has a Photo Browser, which behaves much like a "Media Browser Lite: the title bar says "Photo Browser", it only accesses your Aperture and iPhoto Libraries, and only shows photos and video.
    [2a.2] iWork applications have a more comprehensive Media Browser, where you can select between Audio, Photos, and Movies. If you select Audio the iWork Media Browser will show any audio files present in your Aperture or iTunes library. If you select Movies, the iWork Media Browser will show any movie clips present in your Aperture or iMovie libraries. Photos behaves the same way as "Photo Browser" in Mail, showing any photos present in your Aperture (or iPhoto if installed) libraries.
    Turns out I had three audio clips in my Aperture library. When selecting "Photos" in either the Mail or iWork browsers, the total item count will only show photos and videos - no audio clips. So now 17 missing items remain.
    [2b] Stacks - one project contained nine photos grouped into a stack. Only the key photo of a stack is previewed/shown in Media Browser. So a stack of nine photos will only show as one in the browser - unstacking the photo will allow them all to appear. So now nine missing items.
    [2c] Seven photographs somehow had broken links to their referenced masters, and needed to be reconnected. Down to two missing items.
    [2d] One photo simply wouldn't cooperate - no matter how many times I regenerated the preview, or deleted the preview and then regenerated it, nothing worked. I deleted it from the library and reimported it. One missing item remains.
    [2e] Final missing item was a photograph I rejected. Makes sense; as media browser does not display rejects.
    Problem solved!! Hopefully this might be of help to somebody in the future.
    cheers,
    Mark

  • Why is the import tab missing under the file tab?

    Why is import missing under the file tab? I want to import bookmarks etc. from Safari into Firefox.

    You can find the Import menu entry in the Bookmarks Manager (Library)
    *Bookmarks > Show All Bookmarks > Import & Backup > Import Data from Another Browser
    *http://kb.mozillazine.org/Import_bookmarks

  • Definition class name missing in XML file of type taskFlow

    Hi all,
    I am trying to invoke a bounded taskflow from a region on a jspx page.
    My jspx page has: *<af:region value="#{bindings.citySearchTF.regionModel}" id="r1" />*
    Its page def file has :
    *<taskFlow id="citySearchTF" taskFlowId="/WEB-INF/tfs/bounded/cities/city-search-tf.xml#city-search-tf"*
    xmlns="http://xmlns.oracle.com/adf/controller/binding"/>
    My taskFlow file is :
    *<?xml version="1.0" encoding="windows-1252" ?>*
    *<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">*
    *<task-flow-definition id="city-search-tf">*
    *<default-activity>search-city.jsff</default-activity>*
    *<data-control-scope>*
    *<shared/>*
    *</data-control-scope>*
    *<view id="search-city.jsff">*
    *<page>/view/bounded/city/search-city.jsff</page>*
    *</view>*
    *<use-page-fragments/>*
    *</task-flow-definition>*
    *</adfc-config>*
    Now, while running this jspx page, I am getting the following errors:
    On Browser : ADF_FACES-30179:For more information, please see the server's error log for an entry beginning with: The UIViewRoot is null. Fatal exception during PhaseId: RESTORE_VIEW 1.
    On WLS Logs :
    oracle.jbo.PersistenceException: JBO-34000: Definition class name missing in XML file of type taskFlow
         at oracle.adf.model.binding.DCDefBase.createAndLoadFromXML(DCDefBase.java:402)
         at oracle.adf.model.binding.DCBindingContainerDef.loadExecutables(DCBindingContainerDef.java:1482)
         at oracle.adf.model.binding.DCBindingContainerDef.loadChildrenFromXML(DCBindingContainerDef.java:1278)
         at oracle.adf.model.binding.DCDefBase.loadFromXML(DCDefBase.java:325)
         at oracle.adf.model.binding.DCDefBase.createAndLoadFromXML(DCDefBase.java:409)
         at oracle.jbo.uicli.mom.JUMetaObjectManager.createFromXML(JUMetaObjectManager.java:1274)
         at oracle.jbo.mom.PersistableDefObject.createFromXML(PersistableDefObject.java:84)
         at oracle.jbo.mom.DefinitionManager.loadDefObject(DefinitionManager.java:961)
         at oracle.jbo.mom.DefinitionManager.doFindSessionDefObject(DefinitionManager.java:1037)
         at oracle.jbo.mom.DefinitionManager.findSessionDefObject(DefinitionManager.java:705)
         at oracle.adf.model.binding.DCBindingContainerDef.findSessionDefObject(DCBindingContainerDef.java:351)
         at oracle.adf.model.binding.DCBindingContainerDef.findDefObject(DCBindingContainerDef.java:316)
         at oracle.adf.model.binding.DCBindingContainerReference.createBindingContainer(DCBindingContainerReference.java:127)
         at oracle.adf.model.binding.DCBindingContainerReference.getBindingContainer(DCBindingContainerReference.java:95)
         at oracle.adf.model.BindingContext.get(BindingContext.java:1089)
         at oracle.adf.model.BindingContext.findBindingContainer(BindingContext.java:807)
         at oracle.adf.model.BindingContext.findBindingContainerByPath(BindingContext.java:1598)
         at oracle.adfinternal.controller.application.model.UpdateBindingListener.setBindingELVariable(UpdateBindingListener.java:112)
         at oracle.adfinternal.controller.application.model.UpdateBindingListener.beforePhase(UpdateBindingListener.java:61)
         at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:550)
         at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:100)
         at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchBeforePagePhaseEvent(LifecycleImpl.java:147)
         at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchBeforePagePhaseEvent(ADFPhaseListener.java:119)
         at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:63)
         at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:44)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:319)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:204)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:312)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:122)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    There is some issue with PageDef but I am not able to figure it out. Searched a lot on internet but didn't succeed. Thanks in advance.
    Edited by: 965225 on Dec 17, 2012 3:43 AM

    Hi all,
    I am trying to invoke a bounded taskflow from a region on a jspx page.
    My jspx page has: *<af:region value="#{bindings.citySearchTF.regionModel}" id="r1" />*
    Its page def file has :
    *<taskFlow id="citySearchTF" taskFlowId="/WEB-INF/tfs/bounded/cities/city-search-tf.xml#city-search-tf"*
    xmlns="http://xmlns.oracle.com/adf/controller/binding"/>
    My taskFlow file is :
    *<?xml version="1.0" encoding="windows-1252" ?>*
    *<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">*
    *<task-flow-definition id="city-search-tf">*
    *<default-activity>search-city.jsff</default-activity>*
    *<data-control-scope>*
    *<shared/>*
    *</data-control-scope>*
    *<view id="search-city.jsff">*
    *<page>/view/bounded/city/search-city.jsff</page>*
    *</view>*
    *<use-page-fragments/>*
    *</task-flow-definition>*
    *</adfc-config>*
    Now, while running this jspx page, I am getting the following errors:
    On Browser : ADF_FACES-30179:For more information, please see the server's error log for an entry beginning with: The UIViewRoot is null. Fatal exception during PhaseId: RESTORE_VIEW 1.
    On WLS Logs :
    oracle.jbo.PersistenceException: JBO-34000: Definition class name missing in XML file of type taskFlow
         at oracle.adf.model.binding.DCDefBase.createAndLoadFromXML(DCDefBase.java:402)
         at oracle.adf.model.binding.DCBindingContainerDef.loadExecutables(DCBindingContainerDef.java:1482)
         at oracle.adf.model.binding.DCBindingContainerDef.loadChildrenFromXML(DCBindingContainerDef.java:1278)
         at oracle.adf.model.binding.DCDefBase.loadFromXML(DCDefBase.java:325)
         at oracle.adf.model.binding.DCDefBase.createAndLoadFromXML(DCDefBase.java:409)
         at oracle.jbo.uicli.mom.JUMetaObjectManager.createFromXML(JUMetaObjectManager.java:1274)
         at oracle.jbo.mom.PersistableDefObject.createFromXML(PersistableDefObject.java:84)
         at oracle.jbo.mom.DefinitionManager.loadDefObject(DefinitionManager.java:961)
         at oracle.jbo.mom.DefinitionManager.doFindSessionDefObject(DefinitionManager.java:1037)
         at oracle.jbo.mom.DefinitionManager.findSessionDefObject(DefinitionManager.java:705)
         at oracle.adf.model.binding.DCBindingContainerDef.findSessionDefObject(DCBindingContainerDef.java:351)
         at oracle.adf.model.binding.DCBindingContainerDef.findDefObject(DCBindingContainerDef.java:316)
         at oracle.adf.model.binding.DCBindingContainerReference.createBindingContainer(DCBindingContainerReference.java:127)
         at oracle.adf.model.binding.DCBindingContainerReference.getBindingContainer(DCBindingContainerReference.java:95)
         at oracle.adf.model.BindingContext.get(BindingContext.java:1089)
         at oracle.adf.model.BindingContext.findBindingContainer(BindingContext.java:807)
         at oracle.adf.model.BindingContext.findBindingContainerByPath(BindingContext.java:1598)
         at oracle.adfinternal.controller.application.model.UpdateBindingListener.setBindingELVariable(UpdateBindingListener.java:112)
         at oracle.adfinternal.controller.application.model.UpdateBindingListener.beforePhase(UpdateBindingListener.java:61)
         at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:550)
         at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:100)
         at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchBeforePagePhaseEvent(LifecycleImpl.java:147)
         at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchBeforePagePhaseEvent(ADFPhaseListener.java:119)
         at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:63)
         at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:44)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:319)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:204)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:312)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:122)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    There is some issue with PageDef but I am not able to figure it out. Searched a lot on internet but didn't succeed. Thanks in advance.
    Edited by: 965225 on Dec 17, 2012 3:43 AM

  • Motion problem with File Browser Window

    For some reason I lost the File Browser Inspector and Library window and can't get it back
    I have tried under the window tab and It will not let me check them to show it again. What can I do?
    They appear in my toolbox at the top but also will not let me click on them.

    Ron,
    Trash your preferences, there are loads of posts on here about how to do that if you search.
    Peter

  • Missing Library Albums

    The "Library Albums" component (with star ratings etc.) does not appear on my Library Inspector tab. I downloaded A3 about 3 weeks ago, and it has never appeared. Am I missing something or misreading the documentation?

    This might either be a problem of a corrupted Library or of your preference settings.
    To help to locate the problem, you might try the following:
    Try, if you see the "Library Albums" when you create a new, empty Aperture Library:
    - In Apterture Choose File > Switch to Library > Other
    - In the dialog that appears, click "Create New"
    - In the next dialog, enter a new name for the Library in the "Save As" field, choose a location, then click Create
    To open the new library, again go to  Choose File > Switch to Library
    -If the new Library has the correct structure, then probably your old Aperture Library has been corrupted.
    You could either try to fix it with the usual trouble shooting measures (repair or rebuild the library) or simply try to import your old library completely into the new library (only if it is a managed library - I am not sure, if you safely can import a referenced library without relocating the master).
    -if the new Library does not have the correct structure, then it might be a Lion or Aperture problem, look for "delete user preferences" in the trouble shooting basics: http://support.apple.com/kb/HT3805
    Regards
    Léonie

Maybe you are looking for